This Government Contract opportunity from Government of Canada was posted on April 23, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

High-Power RF Amplifier Design and Manufacturing

Closed

International

Submission Closed05/26/2026, 07:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 334511

New

Federal

Gravimetric Verification and Barcode Scanning Integration

249-NETWORK Contract Office 9 (36C249)

POSTED

DEADLINE

Optical Atomic Clock System Supply and Integration

Department Of Commerce Nist

POSTED

DEADLINE

Custom CTA Module Design and Fabrication

NASA Shared Services Center

POSTED

DEADLINE

High-Reliability PCIe Multifunction I/O Board Supply

FA8579 Software Sprt Afsc Pzim

POSTED

DEADLINE

New Manufacture of Computer/Spoiler (NSN 6615-01-036-3198, P/N 4030470-903)The contract outlines the manufacture and qualification of the Computer/Spoiler component designated as NSN 6615-01-036-3198 with part number 4030470-903 for the B-001B platform. The work encompasses full production lifecycle activities including technical data collection, submission of a System Acceptance Report, and adherence to rigorous quality requirements specified in MQR-PSD-1 and AS9100 standards. This effort is critical to ensuring the component meets all performance, reliability, and safety criteria for its intended military application. The contract type is classified as a subcontract under the North American Industry Classification System code 334511, indicating it involves the manufacturing of electronic components and equipment. The solicitation was posted on August 7, 2026, with a firm response deadline of August 15, 2026, at 4:59 a.m. The procuring agency is the Department of Defense through the Ok DLA Aviation office located in Oklahoma City, and the work is to be performed wherever the selected subcontractor operates, with no specific geographic restrictions listed. Compliance with all applicable quality and documentation standards is mandatory, and failure to meet these requirements may result in rejection of the bid or non-compliance penalties. The contract seeks a qualified manufacturer capable of delivering a fully qualified, production-ready component in alignment with defense sector expectations.

Ok DLA Aviation At Oklahoma City

POSTED

DEADLINE

59--ANTENNA, IN REPAIR/MODIFICATION OF

Solicitation # N0038326RPC65

The contract pertains to the acquisition of a flight-critical antenna component under NSN 7R-5985-015686919-E8, with a quantity of four units to be delivered FOB origin. Due to the unique design capability, proprietary manufacturing knowledge, and specialized technical data held exclusively by previously approved sources, procurement is restricted to those entities previously vetted and authorized by the Government. The item requires formal engineering source approval prior to contract award, as the available technical data is insufficient to support full and open competition, and the qualification of any new supplier would take longer than the timeline allows. Only preapproved sources have been solicited, and any entity not currently approved must submit comprehensive documentation aligned with the NAVSUP Weapon Systems Support Source Approval Information Brochures for spares or repair, depending on the nature of their proposed involvement. Failure to provide complete and accurate information as specified will result in disqualification from consideration. Requests for source approval already under evaluation at NAVSUP WSS must include a copy of the original submission cover letter. The Government is pursuing this acquisition under FAR 6.302-1, allowing sole-source negotiation due to the absence of qualified alternate suppliers and the critical nature of the component. While the notice is not a request for competitive proposals, all responsible parties may submit capability statements within 45 days of the publication date, or 30 days if under an existing Basic Ordering Agreement. Offers must conform strictly to the source approval requirements, and the Government retains full discretion to proceed without competition based on operational needs and market assessments. Commercial item acquisition policies under FAR Part 12 are not being applied, but interested vendors may still declare if they can meet the requirement with a commercial item within 15 days. Technical specifications and associated documents may be accessed via ASSIST-Online or the DODSSP, though drawings, patterns, and deviation lists are not stocked there. Proposals must be directed to the designated point of contact, Chris Campellone, and submitted prior to the September 21, 2026 deadline.

Navsup Weapon Systems Support

POSTED

DEADLINE

Solicitation # N0010426QNE28

This contract solicits repair services for specific naval components including the TOWED ARRAY SONAR, ADAPTER ASSEMBLY IN, ACCELEROMETER MECHA, CIRCUIT CARD ASSEMBLY, and RECEIVING SET SONAR, each identified by their respective NSNs and reference numbers. All repairs must adhere strictly to military standards such as MIL-STD-129 and MIL-STD-130 for marking and identification, and require full compliance with electrostatic discharge controls for circuit cards. Contractors must be authorized distributors of the original manufacturer and hold an active U.S. security clearance in accordance with DD Form 254 due to the controlled technical data involved. Repairs must eliminate all metallic mercury contamination, and any use of mercury requires prior written government approval with accompanying warning labels. The contract mandates Government-Source Inspection and Acceptance, and all repair records must be retained for 365 days after final delivery. The repair turnaround time is set at 375 days measured from physical receipt of the asset at the contractor's facility as recorded in the Commercial Asset Visibility system. Proposals must include firm-fixed pricing for both repair and Beyond Repair scenarios, along with throughput capacity per month and the original procurement cost of the item. Substitutions or design changes require written government authorization and must be classified under specific code designations. The contract includes an option to increase the order quantity by up to 100% within 468 days of award at the same contracted price. All submissions must be sent exclusively via email to Rachel E. Kern, and the acquisition is conducted under emergency flexibility authorities with induction expiration 120 days after award. Packaging must comply with MIL-STD-2073, and all subcontractors are bound by the same requirements regarding mercury, security, and quality control.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Second Industry Day Announcement: Low Profile Mast (LPM) Program

Solicitation # N00024-26-R-6215A

The U.S. Navy, through the Direct Reporting Portfolio Manager for Submarines and the Submarine Electromagnetic Systems Program Office, is hosting a second Industry Day on September 3, 2026, to engage with industry partners on the Low Profile Mast (LPM) program. This event aims to accelerate acquisition by utilizing the Other Transaction Authority (OTA) pathway under Title 10 U.S.C. § 4022, encouraging innovation from both traditional and nontraditional defense companies. Participants will receive an update on refined technical requirements, an overview of the anticipated acquisition timeline, and clarification on the OTA process prior to the formal Request for Prototype Proposal release. The event will be held in-person and virtually in the Washington, D.C. area, with registration closing on August 21, 2026, and limited to two in-person participants per company. Attendance is restricted to companies registered in the United States, United Kingdom, or Australia, and all participants must be pre-approved with submitted individual credentials for facility access. The event will operate at the UNCLASSIFIED – Controlled Unclassified Information level, with no recording allowed and no hard-copy materials distributed; post-event materials will be shared via DoD SAFE. Registration requires valid CAGE or NCAGE numbers and submission of individual participant details including name, affiliation, contact information, and citizenship for security screening. A formal calendar invite with virtual access details will be sent only to approved registrants, with no teleconference option available. Questions on draft technical requirements must be submitted in writing by August 21, 2025, to the designated points of contact. This announcement is purely informational and does not constitute a solicitation or obligation to award contracts; any future formal solicitation will be issued through SAM.gov, and all costs associated with participation or submissions remain the responsibility of the respondents.

POSTED

DEADLINE

Solicitation # SPRMM126QKG98

The contract pertains to the manufacture and delivery of a HYDROPHONE MOUNT under solicitation SPRMM126QKG98, issued by the Defense Logistics Agency (DLA) Mechanicsburg, with performance requirements centered on strict adherence to specified engineering drawings, military standards, and quality systems. The item must conform to drawing 732-18-DL001 and associated revisions, with full configuration control governed by MIL-STD-973, requiring all engineering changes, deviations, or waivers to be formally submitted and approved by the Contracting Officer. Quality assurance mandates compliance with ISO 9001, and the contractor is responsible for all inspections unless otherwise directed, with the government retaining the right to conduct independent verification. Packaging and marking must meet MIL-STD-129 and MIL-STD-2073, and the product must be entirely free of metallic mercury and mercury contamination, with any exception requiring prior written approval and the inclusion of a warning plate identifying the hazardous component. Refurbished materials are prohibited, and distributors must clearly identify the original equipment manufacturer’s CAGE code and part number. The award will be made using the Lowest Price Technically Acceptable (LPTA) criteria, with technical acceptability based on conformity to documented requirements. All contractual documentation must be submitted electronically through the Procurement Integrated Enterprise Environment (PIEE) and its Wide Area Workflow (WAWF) system for invoices and receiving reports. Contractors must register for access to EDA and may obtain controlled drawings via SAM.gov as designated data custodians. The procurement is subject to the Mandatory Use of WFP Mod Assist Module and requires compliance with CMMC Level 1 self-certification for cybersecurity maturity. Small business representations and certifications are binding, and the contract is set aside for small businesses under a specific federal set-aside policy. Delivery dates and offer validity are left blank, indicating flexibility or pending determination. Communication must be conducted through a designated email point of contact, and vendor notifications regarding contract actions are advised via NAVSUP WSS Mechanicsburg. Any unauthorized changes to production facilities are prohibited unless approved in writing with a $250 administrative cost reduction attached, and all subcontractors must be held to the same mercury-free and quality compliance obligations. The contract emphasizes traceability, documentation retention for four years post-delivery, and strict enforcement of defense procurement regulations.

SPRMM1 DLA Mechanicsburg

POSTED

DEADLINE

58--SLAT ASSEMBLY, LBTX

Solicitation # SPRMM126RRA53

SPRMM1 DLA Mechanicsburg

POSTED

DEADLINE

Advanced Electronic Warfare (ADVEW) Support

Solicitation # N00019-26-SIMACQ-TPM272-0236

The Naval Air Systems Command at NAS Patuxent River, Maryland, plans to issue a sole-source contract modification to BAE Systems in Nashua, New Hampshire, under Basic Order Agreement N00019-22-G-0009 and delivery order N00019-24-F-0125 to secure technical support for integrating the AN/ALE-55 Electronic Frequency Converter, Fiber-Optic Towed Decoy, and Dual Band Decoy with the Advanced Electronic Warfare system. This procurement is justified under Title 10 U.S.C. 3204(a)(1) and FAR 6.302-1, as BAE Systems is the only responsible source capable of meeting the government’s requirements, with no alternative suppliers available. The action is not open for competitive bidding, and the intent notice serves only to inform potential parties of the planned action and allow for the submission of interest or capability statements, which will be reviewed at the government’s sole discretion to determine if a competitive process should be pursued. Responses must be submitted in writing via email to Kathleen Erickson or Jessica Guy-Dietrich by the deadline of August 22, 2026, and no phone inquiries will be accepted. The procurement is categorized as a presolicitation under NAICS code 334511 with no set-aside provisions, and performance will occur in New Hampshire though the contracting office is located in Maryland. Companies seeking subcontracting opportunities should contact BAE Systems’ Contracts Manager Bryan Dufour directly. The government retains full authority to proceed with the sole-source award regardless of any responses received, and this notice does not constitute a solicitation or commitment to award.

Naval Air Systems Command

POSTED

DEADLINE

Expeditionary Unmanned Aerial System (eUAS) Manufacturing and Employment Capability Request for Information

Solicitation # RSO-AMPOECT-04

The U.S. Air Force Rapid Sustainment Office has issued a Capability Request for Information (CRFI) under RSO-AMPOECT-04 to explore market capabilities for an expeditionary unmanned aerial system (eUAS) manufacturing and employment solution tailored for austere, forward-deployed environments. This initiative seeks to enable rapid, on-demand production of attritable UASs, first-person view drone kits, counter-UAS interceptors, spare parts, and accessories using mobile, transportable manufacturing systems that reduce dependency on traditional supply chains. The system must be drone-agnostic, compatible with open architecture standards such as Modular Open Systems Approach (MOSA), and capable of ingesting standard file formats like STEP, STL, and 3MF locally. It must fit within an ISO container or ISU-90 footprint, be transportable via tactical and strategic airlift assets—including C-130s and helicopter sling-loads—and withstand extreme environmental conditions from -40°F to 125°F with MIL-STD-810-equivalent dust and water resistance. Power must be compatible with standard military generators or tactical microgrids, supported by an industrial-grade uninterruptible power supply, and the system must comply with NFPA 70 hazardous location standards for volatile materials. Technical requirements include hardware-encrypted local storage compliant with FIPS 140-2/3, full integration of the Department of Defense Risk Management Framework (DoDI 8510.01), and strict adherence to NDAA FY2020 Section 848 and DCMA Blue List architecture, excluding all components, software, or raw materials from covered nations including China, Russia, Iran, and North Korea. Offerors must demonstrate current Technology Readiness Level (TRL) and Manufacturing Readiness Level (MRL), experience in rapid UAS manufacturing under austere conditions, compact design optimization, power interoperability across international and off-grid sources, and intuitive operator interfaces. Submissions are limited to an 11-page white paper—one page for business information including CAGE code, UEI, small business status, and Buy American Act compliance plan, and ten pages detailing technical approach, experience, and compliance with all specified requirements. Responses must be sent electronically to aflcmc.rod.ect@us.af.mil no later than 30 calendar days after the CRFI’s posting to SAM.gov, with no verbal inquiries accepted and no reimbursement for response costs. Proprietary information must

FA8684 Aflcmc Rodk

POSTED

about 20 hours ago

DEADLINE

in 30 days

AI Contract Overview

The contract entails the full design, engineering, and production of a high-power RF amplifier system operating within the 7.5 to 18 GHz frequency range with a minimum output power of 1000 watts. The system must be engineered to meet stringent military-grade performance standards, including robust electromagnetic shielding and advanced thermal management capabilities to ensure reliable operation under extreme environmental conditions. All components and assemblies must comply with defense-grade specifications for durability, signal integrity, and long-term stability in operational deployments. This is a subcontract opportunity issued by the Government of Canada through the Department of National Defence, with a response deadline of May 26, 2026. The North American Industry Classification System code 334511 applies, indicating a focus on radio and television broadcasting and communications equipment manufacturing. Work is to be performed in Canada, and while the specific location within the country is not detailed, the project requires full domestic compliance with national defense procurement protocols. The tender is open to qualified suppliers capable of delivering a complete, integrated system ready for immediate military use without supplemental customization.

General Info

Design and produce 1000W 7.5-18 GHz RF amplifier with military-grade shielding in Canada.

Agency

Government of Canada → Department of National DefenceView Agency

NAICS

334511 - Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument ManufacturingView NAICS

Place of Performance

Canada, CAN

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseClosed

PostedApr 23

subcontract

Response DeadlineMay 26

Deadline has passed

Submission Closed

05/26/2026, 07:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyGovernment of Canada → Department of National Defence

ContactsNo contacts available

OfficeN/A

Organization / Agency

Government of Canada → Department of National Defence

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Full design, engineering, and production of a 7.5–18 GHz, 1000W high-power RF amplifier system with shielding, thermal management, and military-grade performance compliance.