High Purity Germanium Radiation Detector

THIS IS A COMBINED SYNOPSIS/SOLICITATION FOR COMMERCIAL ITEMS PREPARED IN ACCORDANCE WITH THE FORMAT IN FAR SUBPART 12.6-STREAMLINED PROCEDURES FOR EVALUATION AND SOLICITATION FOR COMMERCIAL ITEMS-AS SUPPLEMENTED WITH ADDITIONAL INFORMATION INCLUDED IN THIS NOTICE. THIS ANNOUNCEMENT CONSTITUTES THE ONLY SOLICITATION; QUOTATIONS ARE BEING REQUESTED, AND A SEPARATE WRITTEN SOLICITATION DOCUMENT WILL NOT BE ISSUED. THE SOLICITATION IS BEING ISSUED USING SIMPLIFIED ACQUISITION PROCEDURES UNDER THE AUTHORITY OF FAR 13.5 TEST PROGRAM FOR CERTAIN COMMERCIAL ITEMS. This solicitation is a Request for Quotation (RFQ). The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular (FAC-42) 1352.215-72 INQUIRIES (APR 2010) Offerors must submit all questions concerning this solicitation in writing to the Contracting Officer. Questions should be received no later than ten calendar days after the issuance date of this solicitation. All responses to the questions will be made in writing, without identification of the questioner, and will be included in an amendment to the solicitation. Even if provided in other form, on the question responses included in the amendment to the solicitation will govern performance of the contract. (end of provision) The associated North American Industrial Classification System (NAICS) code for this procurement is 333314 with a small business size standard of 500 employees. This requirement is unrestricted and all interested Contractors may submit a quotation. All offerors shall provide a quotation for the following line item: Line Item 0001: One (1) High Purity Germanium Radiation Detector. *** Introduction The contractor shall furnish the necessary personnel, material, equipment, and electronics to fabricate and deliver one High Purity Germanium Radiation Detector. Background The National Institute of Standards and Technology has a requirement for a high efficiency, high resolution, p-type coaxial Germanium radiation detector to be used for gamma spectroscopy measurements. Quotations shall include all electronics needed for operation of the detector. Minimum Requirements The detector shall meet or exceed the technical specifications identified below. All items must be new. Used or remanufactured equipment will not be considered for award. 1. Performance a. The detector shall be capable of detecting a photon energy range of 100 keV to 12 MeV. b. The detector shall have a detection efficiency of greater than 40% relative to a standard 3'x3 NaI. c. The detector shall have detection energy resolution of less than 1.90-keV FWHM at 1333 keV and a peak to Compton ratio of greater than 50. 2. Specifications a. Detector i. The detector shall be a standard up-looking configuration, with a vertical detector/cryostat and dipstick configuration, filling collar, and standard 30 liter liquid nitrogen dewar. ii. The detector shall be fabricated with a built-in, slim-line, RC feedback preamplifier. The preamplifier shall provide for the following connections: dual BNC signal output for energy and timing signals, HV bias input, bias shutdown, and standard nine pin preamp power supply. iii. Detector crystal end cap dimensions shall be nominally 3.25 inches in diameter for the full length of the detector chamber including the preamp, to allow installation into a standard, up- looking shielded cave and use with 3.25 inch interior diameter Marinelli type beakers. iv. Crystal distance from endcap shall be less than 5 mm. v. Crystal length shall be greater than 2 inches. vi. A standard ten foot cable set shall be provided with the detector for connection to standard spectroscopy electronics and power supplies. b. High performance energy spectroscopy amplifier i. Shall be capable of automatic pole-zero adjustments. ii. Shall have the ability to set to automatic base-line restore. iii. Shall be capable of accepting input for both positive and negative polarity signals from a germanium detector preamplifier. iv. Shall have a positive 0 to 10-V output signal suitable for use with a multi-channel pulse-height analyzer. v. Shall have a continuously variable gain from 2.5 to 1500. vi. Shall be capable of selection of triangular and Gaussian pulse shaping (from unipolar output). vii. Shall be able to select time shaping constants. viii. Shall have a built-in pulse pile-up rejection. c. Bias (positive or negative) voltage supply i. Shall have a selectable range from 0 to 5 kV within - 3% of dial setting. ii. Shall be capable of maintaining less than - 0.1%/h variation in output voltage. iii. Shall have a bias shutdown input compatible with a standard detector warm-up sensor. iv. Shall have indicators for voltage, positive or negative bias, and shutdown condition. Express Warranty Contractor shall provide standard commercial warranty. Delivery FOB Destination delivery terms are requested, and shall take place in accordance with Contractor's commercial schedule. FOB Destination means: The contractor shall pack and mark the shipment in conformance with carrier requirements, deliver the shipment in good order and condition to the point of delivery specified in the purchase order, be responsible for any loss of and/or damage to the goods occurring before receipt and acceptance of the shipment by the consignee at the delivery point specified in the purchase order; and pay all charges to the specified point of delivery. The contractor shall deliver line item 0001 to NIST, Building 301, Shipping and Receiving, Gaithersburg, MD 20899-1640. PROVISIONS AND CLAUSES: The following provisions and clauses apply to this acquisition and are hereby incorporated by reference. All FAR clauses may be viewed at http://acquisition.gov/comp/far/index.html. Provisions 52.212-1, Instructions to Offerors-Commercial Items 52.212-3 Offeror Representations and Certifications-Commercial Items Offerors shall complete annual representations and certifications on-line at http://orca.bpn.gov in accordance with FAR 52.212-3 Offerors Representations and Certifications- Commercial Items. If paragraph (j) of the provision is applicable, a written submission is required. Clauses 52.212-4 Contract Terms and Conditions'Commercial Items 52.212-5 Contract Terms and Conditions Required to Implement Statutes or Executive Orders'Commercial Items'Commercial Items including subparagraphs: 52.222-3, Convict Labor; 52.222-19 Child Labor - Cooperation With Authorities And Remedies; 52.222-21, Prohibition of Segregated Facilities; 52-222-26, Equal Opportunity; 52.222-35, Equal Opportunity for Special Disabled Veterans, Veterans of the Vietnam Era, and Other Eligible Veterans 52.222-36, Affirmative Action for Workers with Disabilities; 52.222-37, Employment Reports on Special Disabled Veterans, Veterans of the Vietnam Era, and Other Eligible Veterans 52.225-3, Buy American Act - Free Trade Agreement - Israeli Trade Act, Alternate I; 52.225-13 Restriction on Certain Foreign Purchases; 52.232-33 Payment by Electronic Funds Transfer-Central Contractor Registration. INSTRUCTIONS: Central Contractor Registration In accordance with FAR 52.204-7, the awardee must be registered in the Central Contractor Registration (www.ccr.gov) prior to award. Refusal to register shall forfeit award. Due Date for Quotations Offerors shall submit their quotations so that NIST receives them not later than 12:00 p.m. Eastern Time on July 16, 2010. FAX quotations shall not be accepted. E-mail quotations shall be accepted at contact@example.gov. Please reference the RFQ number in the subject line of email communications. Offerors quotations shall not be deemed received by the Government until the quotation is entered in the e-mail inbox set forth above. Quotations shall be sent to the National Institute of Standards and Technology, Acquisition Management Division, Attn: Paula Wilkison, 100 Bureau Drive, Mail Stop 1640, Gaithersburg, MD 20899-1640. All offerors should ensure the RFQ number is visible on the outermost packaging. Because of heightened security, FED-EX, UPS, or similar delivery methods are the preferred method of delivery of quotes. If quotes are hand delivered, delivery shall be made on the actual due date through Gate A, and a 48 hour (excluding weekends and holidays) prior notice shall be provided to Paula Wilkison, Contract Specialist on +1 (555) 000-0000. Addendum to FAR 52.212-1, Quotation Preparation Instructions 1) Price Quotation: The offeror shall submit an original and one copy of the completed price schedule. If the quotation is submitted electronically, additional copies are not required. The pricing quotation shall be separate from any other portion of the quotation. The offeror should propose a firm-fixed-price, FOB Destination, for each CLIN. Contractor shall state express warranty coverage. Price quotations shall remain valid for a period of 90 days from the date quotations are due. 2) Technical Quotation: The offeror shall submit an original and one copy of the technical quotation. If the quotation is submitted electronically, additional copies are not required. The technical quotation shall address the following: Technical Capability: The offeror shall submit a technical description or product literature for the equipment it is proposing, which clearly identifies the manufacturer, make and model. The offeror must demonstrate that its proposed equipment meets or exceeds each minimum requirement described in the statement of work by providing a citation to the relevant section of its technical description or product literature. If applicable, evidence that the Offeror is authorized by the original equipment manufacturer to provide the item(s) in the quotation should be included. The Offerors shall acknowledge that NIST will not store the equipment onsite before it is installed. Past Performance: The offeror shall provide past performance information regarding relevant contracts over the past five (5) years with Federal, state, or local governments, or commercial customers. If the offeror has no relevant past performance, it may include a statement to that effect in its quotation. The government reserves the right to consider data obtained from sources other than those described by the offeror in its quotation. It is recommended that approximately 3-5 contracts be referenced. Acceptance of Terms and Conditions: This is an open-market solicitation for equipment as defined herein. The Government intends to award a Purchase Order as a result of this solicitation that will include the clauses set forth herein. The quotation should include one of the following statements: - The terms and conditions in the solicitation are acceptable to be included in the award document without modification, deletion, or addition. OR - The terms and conditions in the solicitation are acceptable to be included in the award document with the exception, deletion, or addition of the following: Offeror shall list exception(s) and rationale for the exception(s) Note: This procurement is not being conducted under the GSA Federal Supply Schedule (FSS) program or another Government-Wide Area Contract (GWAC). If an offeror submits a quotation based upon an FSS or GWAC contract, the Government will accept the quoted price. However, the terms and conditions stated herein will be included in any resultant Purchase Order, not the terms and conditions of the offeror's FSS or GWAC contract, and the statement required above shall be included in the quotation. QUOTATION EVALUATION: Evaluation Factors Award shall be made to the offeror whose quotation offers the best value to the Government price and other factors considered. The Government will evaluate quotations based on the following evaluation criteria: 1) Technical Capability 2) Past Performance, and 3) Price. All non-price factors, when combined, are approximately equally important to price. Technical Capability: No prototypes, demonstration models, used or refurbished instruments will be considered. Evaluation of technical capability shall be based on the information provided in the quotation. NIST will evaluate whether the offeror has demonstrated that its proposed equipment meets or exceeds all minimum requirements. Quotations that do not demonstrate the proposed equipment meets all requirements will not be considered further for award. If an offeror does not indicate whether its proposed equipment meets a certain minimum requirement, NIST will determine that it does not. NIST will give preference to offerors who demonstrate that their proposed equipment exceeds NIST's requirements. Past Performance: The Government will evaluate the Offeror's past performance information and, if appropriate, its proposed subcontractors' past performance to determine its relevance to the current requirement and the extent to which it demonstrates that the offeror has successfully completed relevant contracts in the past five years. In assessing the offeror's past performance information, NIST will evaluate the quality, timeliness, and ability to control cost and schedule of the past work. Evaluation of this factor will be based on information contained in the technical portion of the quotation and information provided by references. The Government will evaluate past performance information by contacting appropriate references, including NIST references, if applicable. The Government may also consider other available information in evaluating the Offeror's past performance. The Government will assign a neutral rating if the offeror has no relevant past performance information. Price: The Government will evaluate price for reasonableness. Past Performance, and Price shall not be evaluated on quotes that are determined technically unacceptable under the Technical Capability Evaluation factor. 1352.233-70 AGENCY PROTESTS (APR 2010) (a) An agency protest may be filed with either (1) the Contracting Officer, or (2) at a level above the Contracting Officer, with the agency Protest Decision Authority. See 64 Fed. Reg. 16,651 (April 6, 1999). (b) Agency protests filed with the Contracting Officer shall be sent to the following address: NIST/ACQUISITION MANAGEMENT DIVISION ATTN: PATRICK STAINES, CONTRACTING OFFICER 100 Bureau Drive, MS 1640 Gaithersburg, MD 20899 (c) Agency protests filed with the Protest Decision Authority shall be sent to the following address: NIST/ACQUISITION MANAGEMENT DIVISION ATTN: HEAD OF THE CONTRACTING OFFICE (HCO) 100 Bureau Drive, MS 1640 Gaithersburg, MD 20899 (d) A complete copy of all agency protest, including all attachments, shall be served upon the Contract Law Division of the Office of the General Counsel within one day of filing a protest with either the Contracting Officer or the Protest Decision Authority. (e) Service upon the Contract law Division shall be made as follows: U.S. Department of Commerce Office of the General Counsel Chief, Contract Law Division Room 5893 Herbert C. Hoover Building 14th Street and Constitution Avenue, N.W. Washington, D.C. 20230 FAX: +1 (555) 000-0000 1352.233-71 GAO AND COURT OF FEDERAL CLAIMS PROTESTS (APR 2010) (a) A protest may be filed with either the Government Accountability Office (GAO) or the Court of Federal Claims unless an agency protest has been filed. (b) A complete copy of all GAO or Court of Federal Claims protests, including all attachments, shall be served upon (i) the Contracting Officer, and (ii) the Contract Law Division of the Office of the General Counsel, within one day of filing a protest with either GAO or the Court of Federal Claims. (c) Service upon the Contract Law Division shall be made as follows: U.S. Department of Commerce Office of the General Counsel Chief, Contract Law Division Room 5893 Herbert C. Hoover Building 14th Street and Constitution Avenue, N.W. Washington, D.C. 20230 FAX: +1 (555) 000-0000 (End of clause)