Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

High Speed Camera

Active
W911S226U3890Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The U.S. Department of Defense through the Office of W6QM Micc-Ft Drum is soliciting proposals for a High Speed Camera under a Small Business Set Aside, total, as indicated by NAICS code 334310, which classifies the procurement within the Imaging and Photographic Equipment Manufacturing category. The solicitation, identified by number W911S226U3890, was posted on July 30, 2026, with a firm response deadline of August 6, 2026, at 6:35 PM Eastern Time. Proposals must be submitted by this date to be considered, and the contract is structured as a combined solicitation, meaning it may integrate acquisition approaches for both supply and service requirements. The primary point of contact for inquiries is Gregory Bissey, reachable via email at gregory.j.bissey.civ@army.mil or by phone at 5206936006, and the official office is located at Fort Drum, New York, 13602-5220. While the place of performance is listed with a ZIP code of 31905, the specific location details are not fully defined in the data, suggesting potential flexibility or further clarification in the full solicitation documents. This opportunity is restricted exclusively to small businesses as part of a federal set-aside program designed to promote small business participation in defense contracting.

General Info

Small business set-aside for high-speed camera procurement by Fort Drum, response due August 6, 2026.

Agency

Department Of Defense → W6QM Micc-Ft DrumView Agency

NAICS

334310 - Audio and Video Equipment ManufacturingView NAICS

Place of Performance

Fort Benning GA, NY, 31905

Set-Aside

SBA

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseCombined Synopsis
Posted

Combined Synopsis

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → W6QM Micc-Ft Drum
Contacts1 person available
OfficeFORT DRUM, NY, 13602-5220, USA
Organization / Agency
Department Of Defense → W6QM Micc-Ft Drum
View Agency Profile
Office AddressFORT DRUM, NY, 13602-5220, USA

Full Description

Show more
High Speed Camera

Similar Contracts

Same NAICS industry code

NAICS: 334310
New
Federal
Giant Voice Enhancement Hill AFB
Solicitation # FA820126Q0031
This is a Firm-Fixed-Price, Total Small Business Set-Aside solicitation for the turn-key enhancement of the Giant Voice Emergency Mass Notification System at Hill Air Force Base, Utah, under solicitation number FA820126Q0031 and NAICS code 334310. The work involves engineering, furnishing, installing, and testing a system upgrade that includes four 16-horn speaker stacks, one Motorola repeater, and a single horn at each of the three base entry gates. All equipment must be exclusively SiRcom and Motorola branded and must fully comply with the performance requirements outlined in the Statement of Objectives. Proposals are evaluated using a Lowest Price Technically Acceptable (LPTA) process, where technical acceptability serves as a pass/fail gate requiring compliance with all SOO specifications including installation standards per UFC 4-021-01, software conformity, and inclusion of all deliverables such as project plans, as-built drawings, equipment manuals, firmware, licenses, and training. Failure to meet these minimum requirements renders a proposal unacceptable and ineligible for award regardless of price. The period of performance is 365 days, commencing September 30, 2026, and concluding September 29, 2027, with CLIN 0001 covering materials and CLIN 0002 covering installation, each to be completed within their respective delivery timelines of 120 and 365 calendar days from award. Performance and delivery are to occur at Hill AFB, UT, with FOB Destination terms applying. Proposals must be submitted electronically no later than 2:00 p.m. MDT on August 7, 2026, to both the Contracting Specialist and Contracting Officer, with the solicitation number included in the email subject line. Offerors must be registered in the System for Award Management (SAM) at the time of submission and comply with multiple FAR and DFARS clauses covering procurement integrity, cybersecurity, labor standards, biobased and recovered material certifications, and prohibitions on covered telecommunications equipment. Contract administration requires electronic invoicing through WAWF using specified DoDAACs, and the contractor must provide a one-year warranty covering all costs of diagnosis, travel, and repair following Government acceptance. A mandatory site visit is scheduled for July 29, 2026, and all technical questions must be submitted by July 3
FA8201 Afsc Ol H Pzio

POSTED

about 19 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334310
New
DIBBS
Cable Assembly Manufacturing and TestingThe contract requires the manufacture, testing, and delivery of military-spec cable assemblies that strictly adhere to Department of Defense standards, including MIL-STD-1916 for sampling procedures and zero-defect quality criteria. All products must meet the technical and compliance requirements established by the Defense Logistics Agency, ensuring full interoperability and reliability in military applications. The work is classified as a subcontract under NAICS code 334310, indicating precision manufacturing of electrical components, and the place of performance is designated as FPO 96616, suggesting operations may support overseas or deployed military units. The solicitation was posted on July 29, 2026, with a firm response deadline of August 6, 2026, under the ASC Commodities Division of the Department of Defense. There is no set-aside designation, meaning all eligible contractors may compete without preference restrictions. While specific performance metrics or volume targets are not detailed, the zero-defect requirement implies rigorous quality control, documentation, and inspection protocols must be integrated throughout the production lifecycle. Successful bidders will be expected to demonstrate proven capability in producing high-reliability cable assemblies for defense systems, with compliance to military specifications being non-negotiable.
ASC COMMODITIES DIVISION

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 334310
New
SLED
Emergency Vehicle Siren and Audio Alert Systems SupplyThe contract seeks the supply of electronic sirens, public address systems, and interior alert systems designed for emergency vehicles, with mandatory dual-tone functionality and voice evacuation capabilities to ensure clear and effective communication during critical incidents. All equipment must meet stringent performance standards to operate reliably under high-stress conditions, and the systems are intended to integrate seamlessly into existing emergency vehicle fleets. The procurement is structured as a subcontract under NAICS code 334310, which classifies it within the Communication Equipment Manufacturing sector, and is managed by the Office of Contract Administration under the California agency structure, with performance requirements centered in San Francisco. Responses are due by August 31, 2026, at 7:00 PM, and the solicitation was posted on July 29, 2026, providing potential suppliers with approximately six weeks to prepare and submit proposals. Although no set-aside designation is specified, the contract is open to qualified subcontractors capable of delivering compliant, high-performance audio alert systems. The place of performance is fixed in San Francisco, and the sourcing process is managed through the City of San Francisco’s official procurement portal, with all relevant documentation and submission instructions accessible via the provided link. Bidders must ensure full compliance with technical specifications and delivery timelines to be considered for award.
Office of Contract Administration

POSTED

2 days ago

DEADLINE

in about 1 month
View Details

More opportunities from Department Of Defense → W6QM Micc-Ft Drum

Same awarding agency

NAICS: 327212
New
Federal
Long Range Spotting Scopes
Solicitation # W911S226U3865
The U.S. Department of Defense through the Office of W6QM Micc-Ft Drum is soliciting bids for Long Range Spotting Scopes under solicitation number W911S226U3865, with a deadline for responses set for August 6, 2026 at 6:30 p.m. Eastern Time. This is a combined contract action designated as a Small Business Set Aside with total set-aside status under NAICS code 327212, meaning only small business concerns are eligible to compete. The contract is intended for procurement of optical equipment designed for extended range target identification and observation, likely supporting military training and operational requirements. Performance will occur in the 31905 zip code area, though the specific location is not detailed beyond the postal code. The primary point of contact for inquiries is Gregory Bissey, reachable via email at gregory.j.bissey.civ@army.mil or by phone at 520-693-6006. The contracting office is headquartered at Fort Drum, New York, 13602-5220. Prospective bidders must respond through the SAM.gov platform using the provided UI link. The solicitation is open exclusively to small businesses, emphasizing the Department of Defense’s commitment to fostering small business participation in defense supply chains. All offers must be submitted prior to the stated deadline to be considered for award.
Other Pressed and Blown Glass and Glassware Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 6 days
View Details
NAICS: 333111
New
Federal
Sub-Compact Utility Tractor with Front Loader and Turf Tire Package
Solicitation # W911S226U3893
The contract seeks the procurement of a Kubota BX2380 Sub-Compact Utility Tractor fully equipped with a front-end loader and heavy-duty turf-safe tires, specifically configured for sensitive groundskeeping and landscape maintenance tasks in confined areas where larger equipment would damage manicured surfaces. The tractor must be powered by a liquid-cooled, 3-cylinder diesel engine delivering at least 21.6 gross horsepower, with a Live Independent PTO system offering 540 RPM at the rear and 2500 RPM at the midpoint to support mid-mount mowers, and must provide a minimum of 17.7 PTO horsepower. The drivetrain requires true four-wheel drive with an operator-controlled rear differential lock, a hydrostatic transmission with two forward and two reverse ranges, wet disc brakes, and hydrostatic power steering for precise maneuverability. Hydraulic capabilities include a minimum 6.0 GPM pump flow and a Category I three-point hitch rated for at least 680 lbs. of lift capacity at 24 inches behind the pins. The front loader must be a factory-matched Kubota LA344 or equivalent unit with quick-attach functionality, flat-faced no-spill couplers, and a minimum lift capacity of 613 lbs. at maximum height with a quick-attach bucket or 739 lbs. with a pin-on bucket, achieving a maximum lift height of 70.7 inches for efficient bin unloading. The unit must be fitted with turf-safe tires to prevent soil compaction and turf damage, have a dry weight between 1,430 and 1,445 lbs., and a turning radius of 7.5 feet or less without brake use. Safety features include a folding ROPS, and all equipment must be delivered fully assembled, serviced, with fluids topped off, and ready for immediate operation at the designated FOB destination. This solicitation is a Small Business Set Aside under NAICS code 333111, issued by the Department of Defense’s Office at Fort Drum, NY, with responses due by August 7, 2026.
Farm Machinery and Equipment Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 7 days
View Details
NAICS: 238910
New
Federal
Demo WWII Buildings and Restore Grounds on Fort Drum, NY
Solicitation # W911S226QA081
The contract solicitation for the demolition of WWII-era buildings and restoration of grounds at Fort Drum, New York, is a full small business set-aside under NAICS code 238910 with a size standard of $19 million, targeting qualified small contractors. All proposals must be submitted electronically via the PIEE Solicitation Module, with a designated Proposal Manager responsible for submitting the quote. The site visit is scheduled for July 23, 2026, at 1:00 PM Eastern Time in Conference Room 103 at 4205 Po Valley Rd, and interested parties must notify the Contracting Officer by 10:00 AM that same day to gain access, which requires registration at the Paul Cerjan Gate or the Welcome Center with Real ID-compliant identification and proof of insurance. Questions are due by July 27, 2026, and the final quote submission deadline has been extended to August 7, 2026, at 10:00 AM Eastern Time. Amendments have been made to include Attachment 5, which confirms that the 2011 asbestos survey and subsequent follow-ups satisfy New York State Code Rule 56, eliminating the need for further pre-demolition asbestos surveys. Additional updates include revised Performance Work Statement sections, updated 500 Area Drawings with fencing requirements, and the addition of Attachment 4 containing environmental test results. Access to the installation is strictly controlled, and all offerors must comply with Department of Defense entry protocols.
Site Preparation Contractors

POSTED

about 19 hours ago

DEADLINE

in 7 days
View Details