Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

HOIST, WIRE ROPE

Active
SPE8EE-26-T-2250Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract is for four wire rope hoists identified by NSN 3950-01-495-8333, with a delivery requirement of 167 days after order. The solicitation is part of a Women-Owned Small Business Set-Aside under NAICS code 333923, issued by the Department of Defense through the Defense Logistics Agency, and is subject to strict export control regulations. Technical data associated with this item is governed by either ITAR or EAR, meaning any disclosure to foreign persons—including foreign nationals within the U.S.—requires prior authorization from the Department of State or Commerce, and DFARS 252.225-7048 applies. Access to the controlled data is restricted to contractors certified under the US/Canada Joint Certification Program, who have completed mandatory DLA training and submitted the required questionnaire, and must be explicitly approved by DLA. The solicitation, numbered SPE8EE-26-T-2250, was posted on August 5, 2026, with responses due by August 17, 2026, and performance is to take place at Robins Air Force Base, Georgia. The primary point of contact is Philip Ferrara, reachable via email and phone provided in the contract data.

General Info

Four wire rope hoists for Robins AFB, ITAR/EAR controlled, Women-Owned Small Business Set-Aside, DLA solicitation.

Agency

Department Of Defense → CONSTRUCTION & EQUIPMENT MANU & CONView Agency

NAICS

333923 - Overhead Traveling Crane, Hoist, and Monorail System ManufacturingView NAICS

Place of Performance

BLDG 376, ROBINS A F B, GA, 31098-1887, US

Set-Aside

WOSB

Documents

(1)

SPE8EE-26-T-2250.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → CONSTRUCTION & EQUIPMENT MANU & CON
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → CONSTRUCTION & EQUIPMENT MANU & CON
View Agency Profile
Office AddressUS
Contacts
Philip Ferrara
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
HOIST,WIRE ROPE
HOIST, WIRE ROPE
RQ032: EXPORT CONTROL OF TECHNICAL DATA
This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.
The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. NSN/Part Number: 3950-01-495-8333 Quantity: 4 EA Purchase Request: 7017757554QTY: 4 Delivery: 167 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 333923
New
DIBBS
FRAME, HOIST
Solicitation # SPE8EE-26-T-2274
The contract pertains to the procurement of seven FRAME, HOIST units under solicitation number SPE8EE-26-T-2274, with a specified delivery timeframe of 167 days after award. The item is identified by NSN 3950-01-680-9587 and linked to purchase request 7017757573. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with applicable references marked by R or I numbers, and the controlling revision depends on whether the acquisition is simplified or large, as defined by solicitation or amendment dates. Packaging must comply with DLA standards, and any non-accepted supplies must have government identification removed prior to return. The contract may involve covered defense information under RD003 requirements. The solicitation was posted on August 5, 2026, with responses due by August 17, 2026. Performance is to be delivered to New Cumberland, Pennsylvania, 17070-5002, under the Department of Defense, specifically the Construction & Equipment Manufacture and Construction organization. Primary point of contact is Philip Ferrara, reachable via email and phone listed in the contract data.
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 1 hour ago

DEADLINE

in 12 days
View Details
NAICS: 333923
New
DIBBS
SCREEN, INTAKE COVER, WI
Solicitation # SPE8EE-26-T-2233
The contract pertains to the procurement of 27 units of a SCREEN, INTAKE COVER, WINCH with NSN 3950-01-169-8697 under solicitation SPE8EE-26-T-2233, issued by the Defense Logistics Agency. Delivery is required within 167 days after award, and the procurement falls under NAICS code 333923 for construction and equipment manufacturing. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date or award date depending on acquisition size. The item is subject to export controls under either ITAR or EAR, meaning any disclosure of associated technical data to foreign persons—even within the United States—is prohibited without prior authorization from the Department of State or Commerce. Access to this restricted data is limited to contractors with approved US/Canada Joint Certification Program certification, completion of mandatory DOD export control training, and formal approval from DLA. Cybersecurity requirements mandate CMMC Level 2 certification for any third-party assessment organization involved in handling the contract. All covered defense information is subject to applicable DFARS clauses, including DFARS 252.225-7048, and the point of contact for the procurement is Philip Ferrara at the Department of Defense, with performance designated at New Cumberland, PA, ZIP 17070-5002.
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 1 hour ago

DEADLINE

in 12 days
View Details
NAICS: 333923
New
DIBBS
SLING, MULTIPLE LEG
Solicitation # SPE8EE-26-T-2264
This contract is for the procurement of three multiple-leg slings with NSN 3940-01-699-9168 and part number D3340 002 from TAYLOR DEFENSE PRODUCTS, LLC, under solicitation SPE8EE-26-T-2264. The items must be delivered FOB origin within 167 days, with no variance allowed in quantity, and are subject to inspection and acceptance at the destination warehouse in Tracy, California. All packaging must comply with ASTM D3951, but must strictly adhere to the superior requirements of the DLA Master List of Technical and Quality Requirements, including labeling per MIL-STD-129 and palletization as defined by RP001. The unit of issue is each, with a total contract value of $9.00, and the delivery must be completed by February 1, 2027, following the original required delivery date of December 13, 2026. Transportation logistics are governed by DLAD procedural notes C19 and C20, and the sole point of contact for the contract is Philip Ferrara, reachable via phone and email provided. The solicitation was posted on August 5, 2026, with responses due by August 17, 2026, under NAICS code 333923 for construction and equipment manufacturing.
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 1 hour ago

DEADLINE

in 12 days
View Details
NAICS: 333923
New
DIBBS
FAIRING, RESCUE HOIST, H
Solicitation # SPE8EE-26-T-2251
The contract pertains to the procurement of seven units of a fairing and rescue hoist for helicopter applications, identified by part number 42315-120 and NSN 3950-01-377-3199, supplied by Goodrich Corporation under CAGE code 3HRL4. Delivery is required in 167 days with a firm delivery date of February 1, 2028, and the items must be shipped FOB origin with no variance allowed in quantity. Inspection and acceptance occur at the origin, and the supplier must comply with DLA’s packaging standards, which mandate adherence to MIL-STD-129 for marking and labeling, ASTM D3951 for packaging, and RP001 for DLA packaging requirements, with DLA’s Master List of Technical and Quality Requirements taking precedence over all other standards. Sampling for quality assurance must follow MIL-STD-1916 or an equivalent zero-based plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively; unspecified attributes are treated as major and acceptance requires zero non-conformances unless otherwise stipulated. The unit of issue is each, with a total contract value of $7.00 per unit, totaling $49.00, and the procurement is governed under solicitation SPE8EE-26-T-2251, issued on August 5, 2026, with a response deadline of August 17, 2026. The end destination for delivery is the DLA Distribution facility at New Cumberland, Pennsylvania, and transportation must conform to DLAD Proc Note C19 for freight and C20 for first destination. Item Unique Identification is not required per customer request, and DFARS 252.211-7003(c)(1)(i) applies. Physical identification of the bare item must include the contractor’s name, CAGE code, and part number in accordance with RQ017. All technical and quality requirements referenced by R or I numbers are sourced from the DLA Master List, with the revision in effect on the RFP issue date controlling unless amended. The product falls under NAICS code 333923 for defense equipment manufacturing and is classified as a federal acquisition under the Department of Defense.
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 1 hour ago

DEADLINE

in 12 days
View Details
NAICS: 333923
New
DIBBS
TIE DOWN, CARGO, VEHI
Solicitation # SPE8EF-26-T-1581
This contract pertains to the procurement of 26 units of TIE DOWN, CARGO, VEHI with NSN 3990017238158 under solicitation SPE8EF-26-T-1581, issued by the Defense Logistics Agency. Delivery is required FOB origin within 176 days of contract award, with no tolerance for quantity variance and inspection and acceptance occurring at the destination. Packaging must comply with MIL-STD-2073-1E, including specific preservation methods such as preservative treatment and dry packaging, and marking must adhere to MIL-STD-129 with no special marking codes required. Palletization follows DLA packaging requirements, and shipments are to be sent to the DLA Distribution facility in New Cumberland, Pennsylvania. The contract incorporates technical and quality requirements referenced in the DLA Master List and is subject to defense information handling protocols. The unit of issue is AY, and the total price is based on a unit rate of $26.00. The contract also references transportation guidelines from DLAD procedural notes C19 and C20, and the delivery must be completed by February 10, 2027, with the original required delivery date set for March 12, 2027. The contracting officer, Russell Keiser, can be contacted at the provided email and phone number for procurement inquiries. This solicitation was posted on August 5, 2026, with responses due by August 17, 2026, and falls under NAICS code 333923 for construction and equipment manufacturing. All supplies are to be delivered without government identification if not accepted, and the applicable technical standards are controlled by the version of the DLA Master List in effect on the solicitation issue date.
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 1 hour ago

DEADLINE

in 12 days
View Details
NAICS: 333923
New
DIBBS
HOIST, CHAIN
Solicitation # SPE8EE-26-T-2246
The item specified is a hoist and chain with NSN 3950-01-436-4605, quantity of 33 units, under purchase request 7017757919. The original source of supply referenced in drawing 12366425, Cage 12128 with part number 4621CF, has been declared obsolete and is replaced by Cage 80735 with the same part number. This item is subject to strict export control regulations under either ITAR or EAR, meaning any transfer of technical data—whether to foreign nationals within the United States or abroad—is prohibited without prior authorization from the Department of State or the Department of Commerce. DFARS 252.225-7048 governs the handling of this controlled data, and only DLA contractors with an approved US/Canada Joint Certification Program certification, completed training on proper handling of DOD export-controlled technical data, and approved access through the DLA questionnaire are permitted to handle this information. The solicitation, identified as SPE8EE-26-T-2246, was posted on August 5, 2026, with a response deadline of August 17, 2026. It is a total small business set-aside under NAICS code 333923, administered by the Department of Defense through the Construction & Equipment Manu & Con agency. The place of performance is New Cumberland, PA, with a delivery requirement of 169 days after delivery order. Primary point of contact for the contract is Philip Ferrara, reachable via email and phone. Access to contract details and submissions is available through the DIBBS system.
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 1 hour ago

DEADLINE

in 12 days
View Details
NAICS: 333923
New
DIBBS
LEVELER, LOAD
Solicitation # SPE8EE-26-T-2235
This contract pertains to the procurement of 16 units of a load leveler with NSN 3950-01-263-9513 under solicitation SPE8EE-26-T-2235, issued by the Defense Logistics Agency for a total small business set-aside. The item must be delivered FOB origin within 167 days of contract award, with no tolerance for quantity variance, and inspection and acceptance occur at the destination. Packaging must comply with ASTM D3951, but all applicable DLA Master List of Technical and Quality Requirements, identified by R or I numbers, take precedence. Marking and labeling must follow MIL-STD-129, and palletization must adhere to DLA’s packaging requirements. The units of issue and quantity per unit pack are defined in the contract and align with DLA’s authorized unit of issue system. Delivery is directed to the DLA Distribution facility in New Cumberland, Pennsylvania, with specific parcel post and freight shipping addresses provided. The required ship date is February 1, 2027, with an original delivery deadline of December 25, 2026. Transportation instructions are governed by DLAD Proc Notes C19 and C20. The contract includes technical and quality standards referenced from the DLA Master List, and government identification must be removed from any non-accepted supplies. The solicitation was issued on August 5, 2026, with responses due by August 17, 2026, under NAICS code 333923 for construction and equipment manufacturing.
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 1 hour ago

DEADLINE

in 12 days
View Details
NAICS: 333923
New
DIBBS
WIPER
Solicitation # SPE8EE-26-T-2216
The contract pertains to the procurement of a WIPER component used on a Universal Gear Service Gear Assembly, identified by NSN 3950-00-004-8348 and part number 50002-217-0010, with a required quantity of 75 units. The solicitation number is SPE8EE-26-T-2216, issued by the Defense Logistics Agency under the Department of Defense, with a response deadline of August 17, 2026, and a required delivery date of December 5, 2026, allowing for a 167-day delivery window. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, which supersede any other standards such as ASTM D3951. Packaging must comply with MIL-STD-129 and RP001 specifications, including palletization and labeling, and all items must be prepared for shipment FOB origin with zero variance in quantity. Inspection and acceptance occur at the destination, and the shipment must be delivered to the specified receiving warehouse in Tracy, California. The unit of issue is each, with a unit price of $75.00, resulting in a total price of $5,625.00. Transportation instructions are governed by DLAD Proc Notes C19 and C20, and government identification must be removed from non-accepted supplies. The contracting officer is Philip Ferrara, and the document emphasizes strict compliance with all DLA procurement and packaging mandates.
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 1 hour ago

DEADLINE

in 12 days
View Details
NAICS: 333923
New
DIBBS
BLOCK, TACKLE
Solicitation # SPE8EE-26-T-2284
The contract specifies the procurement of two BLOCK, TACKLE units identified by NSN 3940017288326 and purchase request 7017757069, with a total quantity of four units delivered in two separate shipments of two units each. Each unit is priced at $2.00, with no variance permitted in quantity. Delivery is required within 94 days of award, FOB origin, with inspection and acceptance occurring at the destination. All packaging must comply with ASTM D3951 and MIL-STD-129 labeling standards, and palletization must adhere to DLA’s RP001 packaging requirements, with the DLA Master List of Technical and Quality Requirements overriding any conflicting ASTM provisions. The items are to be shipped to two distinct DLA distribution locations in Albany, Georgia, and New Cumberland, Pennsylvania, with specified shipping addresses and parcel post points. The original delivery deadline is January 2, 2027, though ship dates are required by June 22, 2026, and April 7, 2027, respectively. The solicitation, issued under SPE8EE-26-T-2284, was posted August 5, 2026, with a response deadline of August 17, 2026, and the contract falls under NAICS code 333923. Primary point of contact is Philip Ferrara with the Department of Defense’s Construction & Equipment Manu & Con agency.
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 1 hour ago

DEADLINE

in 12 days
View Details
NAICS: 333923
New
DIBBS
TENSIONER PULLEY AS
Solicitation # SPE8EE-26-T-2259
The contract is for the procurement of 267 units of a tensioner pulley assembly with NSN 3950-01-629-9198 under solicitation SPE8EE-26-T-2259, issued by the Department of Defense through the Defense Logistics Agency. The requirement is set aside exclusively for small businesses as defined by the SBA, with a response deadline of August 17, 2026, and delivery expected 134 days after award. The technical data associated with this item is subject to export control under either ITAR or EAR, prohibiting any disclosure or transfer to foreign persons or entities without prior authorization from the U.S. Department of State or Commerce, including foreign nationals employed within the United States. Compliance with DFARS 252.225-7048 is mandatory, and only contractors with an approved US/Canada Joint Certification Program certification, completion of required DOD export control training, and approval from DLA are permitted to handle this controlled data. The place of performance is specified as New Cumberland, PA, 17070-5002, and primary point of contact is Philip Ferrara, reachable via email and phone provided in the contract details.
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 1 hour ago

DEADLINE

in 12 days
View Details
NAICS: 333923
New
DIBBS
HOIST, CHAIN
Solicitation # SPE8EE-26-T-2236
The contract pertains to the procurement of eight chain hoists identified by NSN 3950-01-178-2932 under solicitation SPE8EE-26-T-2236, with a total small business set-aside designation and a NAICS code of 333923. Delivery is required within 119 days after award, and responses must be submitted by August 17, 2026. The contract incorporates all applicable technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, with the controlling revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for larger acquisitions unless an amendment supersedes it. Configuration change management and any requests for deviations or waivers must follow formal procedures, and contractor compliance with mercury restrictions is mandatory—mercury or mercury-containing compounds must not be intentionally added or come into direct contact with supplied hardware, except for specific exceptions such as functional mercury in batteries, fluorescent lights, instruments, sensors, weapon systems, or approved chemical reagents as specified by NAVSEA; portable fluorescent lamps and instruments containing mercury must be shockproof and include a secondary containment barrier per NAVSEA 5100-003D. The contractor is also required to provide one complete manufacturer’s commercial manual covering operation, service, maintenance, and repair for each unit. Government identification must be removed from non-accepted supplies per contractual requirements. All performance and deliverables are governed by the Department of Defense, with the place of performance located in New Cumberland, Pennsylvania, and primary point of contact information provided via Philip Ferrara.
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 1 hour ago

DEADLINE

in 12 days
View Details
NAICS: 333923
New
DIBBS
ADAPTER, HOISTING
Solicitation # SPE8EE-26-T-2283
The contract is for the procurement of 11 units of an ADAPTER, HOISTING with NSN/Part Number 3940-01-698-5686 under solicitation SPE8EE-26-T-2283, issued as a Total Small Business Set-Aside under NAICS code 333923. The solicitation was posted on August 5, 2026, with responses due by August 17, 2026, and delivery is required 167 days after award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with applicable revisions controlled by the solicitation issue date or award date based on acquisition size. Export control provisions apply to technical data associated with this item, subject to ITAR or EAR regulations, restricting disclosure to foreign persons regardless of location and requiring prior government authorization for export. Contractors must hold US/Canada Joint Certification Program certification, complete required DOD export control training and a DLA questionnaire, and receive formal approval from DLA to access controlled data. DFARS 252.225-7048 governs the handling of this restricted technical information. The point of contact is Philip Ferrara, and delivery is to Tracy, California, 95304-5000.
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 1 hour ago

DEADLINE

in 12 days
View Details

More opportunities from Department Of Defense → CONSTRUCTION & EQUIPMENT MANU & CON

Same awarding agency

NAICS: 332991
New
DIBBS
ROLLER ASSEMBLY, CON
Solicitation # SPE8EF-26-Q-0165
The contract is for the procurement of 20 roller assemblies with NSN 1730-01-245-7322 under solicitation SPE8EF-26-Q-0165, with a 60-day delivery requirement from award. The technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions controlled based on the type of acquisition and applicable dates. Packaging must comply with DLA standards, and government identification must be removed from non-accepted supplies. The contractor must be certified at CMMC Level 2 by an approved third-party assessment organization and handle covered defense information in accordance with applicable regulations. Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise specified, and attributes must be verified at designated levels or AQLs. Technical data associated with this item is subject to export control under ITAR or EAR, requiring prior government authorization for disclosure or transfer, including to foreign nationals within the United States. Access to this controlled data is restricted to contractors with approved JCP certification, completed DOD training, and DLA authorization. The contract is issued by the Department of Defense, with Sharon Forde as the primary point of contact.
Ball and Roller Bearing Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 7 days
View Details
NAICS: 336413
New
DIBBS
NRP, LP HOSE ASSY-6A
Solicitation # SPE8EF-26-T-1589
This contract pertains to the procurement of NRP, LP HOSE ASSY-6A, identified by NSN 1730-01-655-9887 and part number 8028-080-8050-6 from PROGRESSIVE HYDRAULICS, INC., with a quantity of five units to be delivered under solicitation SPE8EF-26-T-1589. The item is classified as a TYPE I (CODE S) with a non-extendable shelf life of 60 months, as mandated by RS023, and requires compliance with DLA packaging standards under RP001 and MIL-STD-2073-1E, including specific packing methods, preservation, and marking per MIL-STD-129 with Special Marking Code 32. Delivery is FOB origin, with inspection and acceptance occurring at the destination, and no variance in quantity is permitted. The required delivery date is 167 days from contract award, with an original deadline of March 8, 2027, and a need ship date of February 1, 2027. The item must be shipped to the designated delivery address in Tracy, California, under transportation guidelines noted in DLAD Procurement Notes C19 and C20. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, and the version in effect on the solicitation issue date controls. The contract is subject to Covered Defense Information clauses and utilizes the DoD unit of issue, with pricing set at $5.00 per unit for a total value of $25.00.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 12 days
View Details
NAICS: 333998
New
DIBBS
SKID, PLATFORM
Solicitation # SPE8EF-26-T-1567
The contract is for the procurement of 2,243 units of a SKID, PLATFORM identified by NSN 3990-01-484-6521 under solicitation SPE8EF-26-T-1567, with a total price of $2,243.00 per unit. Delivery is required FOB origin within 167 days of the contract award, with inspection and acceptance points both set at the destination. All supplies must comply with the DLA Master List of Technical and Quality Requirements, which take precedence over other standards such as ASTM D3951. Packaging must adhere to MIL-STD-129 and RP001 DLA Packaging Requirements, with wooden pallets and containers constructed from heat-treated wood certified by an ALSC-recognized agency, marked clearly and visibly. Sampling and quality verification follow MIL-STD-1916 or ASQ H1331 Table 1, with zero non-conformances required unless otherwise stated, and critical, major, and minor attributes must be verified at levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Oak and chestnut wood must be bark-free, square-edged, or have a moisture content of no more than 20 percent. The contractor is responsible for inspecting each shipment for compliance. Deliveries must be sent to DLA Distribution Red River in Texarkana, Texas, with an original required delivery date of February 5, 2027, and a need ship date of February 1, 2027. The unit of issue is each, with no variance allowed in quantity.
All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 12 days
View Details
NAICS: 333914
New
DIBBS
PUMP, BUCKET, LUBRICA
Solicitation # SPE8EE-26-T-2220
The contract solicits 39 units of a hand-operated, T-handle pressure pump system designed for lubrication use, which includes a heavy-duty 3/8-inch I.D. hose between 6 to 10 feet long, a follower plate, and a container with a foot step and leakproof cover that supports the pump head. All items must comply with DLA packaging requirements and incorporate technical and quality standards from the DLA Master List of Technical and Quality Requirements, with the applicable revision controlled by the solicitation issue or award date. The product must be marked in accordance with MIL-STD-130N for U.S. military property identification, and the contractor is required to overpack one copy of the manufacturer’s commercial manual covering operation, service, maintenance, and repair with each unit. Sampling and inspection follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise specified, and unspecified attributes are treated as major with verification levels assigned accordingly. The solicitation number is SPE8EE-26-T-2220, issued August 5, 2026, with responses due by August 17, 2026, under NAICS code 333914 for construction and equipment manufacturing. Delivery is due within 167 days of award, and performance is to be completed at New Cumberland, Pennsylvania, with Philip Ferrara identified as the primary point of contact.
Measuring, Dispensing, and Other Pumping Equipment Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 12 days
View Details
NAICS: 325211
New
DIBBS
ROLLER, MATERIAL HANDLI
Solicitation # SPE8EF-26-T-1577
The contract specifies the procurement of 16 material handling rollers identified by NSN 3990-01-588-5068 and part number 5250126, manufactured by ETNYRE & CO, with all metal structural components painted tan 686 using CARC coating, excluding plastic roller wheels and plated fasteners. The item must comply with all applicable technical and quality requirements from the DLA Master List of Technical and Quality Requirements, which supersede ASTM D3951, and must be packaged and labeled per MIL-STD-129 in accordance with DLA Packaging Requirements, including palletization as defined in RP001. The unit of issue is each, with a fixed quantity of 16 units and zero variance allowed. Delivery is FOB origin with inspection and acceptance occurring at destination, and the product must be shipped no later than February 1, 2027, to fulfill the original delivery requirement of January 16, 2027, within a 167-day delivery window. Packaging must align with DLA standards and be addressed to DDSP New Cumberland Facility in New Cumberland, PA, with transportation governed by DLAD Proc Note C19 and C20. The solicitation was issued under SPE8EF-26-T-1577 as a Women-Owned Small Business Set-Aside, with a response deadline of August 17, 2026, and the contract falls under NAICS code 325211 for chemical and allied products manufacturing.
Plastics Material and Resin Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 12 days
View Details
NAICS: 336413
New
DIBBS
CRADLE, GROUND HANDL
Solicitation # SPE8EF-26-T-1556
The contract pertains to the procurement of 13 units of a cradle ground handling item identified by NSN 1730-01-362-0348 under solicitation SPE8EF-26-T-1556, with a response deadline of August 17, 2026, and a delivery requirement within 167 days of award. The item is subject to stringent DLA packaging, technical, and quality standards referenced in the DLA Master List of Technical and Quality Requirements, with the controlling revision determined by the solicitation issue date. Cybersecurity compliance is mandated at CMMC Level 2 through a self-assessment, and the contract incorporates requirements for handling Covered Defense Information. Export control restrictions apply due to technical data governed by ITAR or EAR regulations, prohibiting unauthorized disclosure to foreign persons, including foreign nationals within the U.S., and requiring compliance with DFARS 252.225-7048. Access to this controlled data is restricted to contractors with approved U.S./Canada Joint Certification Program status, completion of DLA-specific training, and formal authorization. Additionally, contractors must remove any government identification from non-accepted supplies. The procurement is managed by the Department of Defense under NAICS code 336413, with performance located in New Cumberland, Pennsylvania, and primary contact information provided for Russell Keiser.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 12 days
View Details
NAICS: 314994
New
DIBBS
ROPE, FIBROUS
Solicitation # SPE8EE-26-T-2229
This contract specifies the procurement of fibrous, plaited rope meeting MIL-DTL-24537A standards, with a circumference of 1.5 inches, supplied in 400-foot reels totaling 38 reels. The rope is classified as a critical item requiring source inspection and must be sourced exclusively from manufacturers or distributors listed on the Qualified Suppliers List for Manufacturers/Distributors (QSLM/QSLD) under FSC 4020; any deviation from this requirement renders a bid noncompliant and may result in criminal penalties. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, and the product must conform to specific packaging standards including MIL-STD-2073-1E and MIL-STD-129, with no special marking required. Mercury or mercury-containing compounds are strictly prohibited except for defined exceptions such as batteries, fluorescent lights, and authorized instruments, with portable devices containing mercury needing shock-proof design and secondary containment per NAVSEA 5100-003D. The quality assurance protocol EQ003 applies, and for QSL-compliant suppliers, additional inspection requirements such as COQC, PVT, and ASQ H1331 are waived. Delivery is FOB origin to the recipient warehouse in Tracy, California, with a 57-day delivery window and a required ship date of August 11, 2025, despite the original delivery date being listed as December 8, 2026. The contract enforces a zero percent quantity variance, with inspection and acceptance occurring at destination, and transportation procedures are governed by DLA Procurement Notes C19 and C20.
Rope, Cordage, Twine, Tire Cord, and Tire Fabric Mills

POSTED

about 1 hour ago

DEADLINE

in 12 days
View Details
NAICS: 336413
New
DIBBS
COVER, AIRCRAFT ENGI
Solicitation # SPE8EF-26-T-1565
This contract pertains to the procurement of a cover for an aircraft engine, identified by part number WL19C92-2 and NSN 1730-01-367-2938, with a quantity of 41 units to be delivered FOB origin. The delivery must be completed within 247 days from the contract award, with a required ship date of April 22, 2027, and an original delivery deadline of May 19, 2027. All items must be packaged in accordance with ASTM D3951, but must fully comply with the more stringent DLA Master List of Technical and Quality Requirements, which take precedence. Packaging and labeling must adhere to MIL-STD-129, and palletization must follow RP001: DLA Packaging Requirements for Procurement. The unit of issue is each, with no variance permitted in quantity delivery. Inspection and acceptance occur at the destination, and all supplies must be delivered to the specified DLA Distribution Depot in Tinker AFB, Oklahoma. The contract includes mandatory compliance with cybersecurity requirements under CMMC Level 2 Self-Assessment due to the handling of covered defense information, and all technical and quality specifications are governed by referenced R or I numbers within the DLA Master List. The solicitation, identified as SPE8EF-26-T-1565, was issued on August 5, 2026, with responses due by August 17, 2026, and is classified under NAICS code 336413 for aircraft engine and engine parts manufacturing. The contractor is required to remove any government identification from non-accepted supplies and must ensure that the delivered item is for a critical application. The point of contact for inquiries is Russell Keiser of the Defense Logistics Agency, and all transportation logistics follow DLAD procedural notes C19 and C20. The total contract value is $1,681.00 based on a unit price of $41.00 per item.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 12 days
View Details