This Government Contract opportunity from Department Of Defense was posted on June 11, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Holder Assembly Manufacturing and Delivery

Closed

Federal

Submission Closed06/16/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 334418

New

SLED

Manufacturing and Supply of 93.3mm² Static/Ground/Earth WireThis subcontract involves the manufacture and supply of 217,754 units of 93.3mm² Aluminum-Steel static, ground, and earth wire for prime contractors working on California High-Speed Rail Authority projects. The fabrication of these conductors must strictly adhere to SNCF reference 0.841.6742 and IGTE 21461/200014 standards in accordance with EN 50182:2001. To ensure quality and regulatory adherence, the provider is required to perform qualification tests and issue Certificates of Compliance. A critical requirement of this agreement is full Buy America Compliance pursuant to 49 U.S.C § 22905. The performance of the contract is centered in Wasco, California. Interested parties must note the response deadline of November 19, 2026, for this procurement effort categorized under NAICS code 334418.

California High-Speed Rail Authority

POSTED

DEADLINE

Supplier of Telematics Fuel Monitoring Device Kits (Master-System-A)This subcontract, issued by Federal Prison Industries under the Department of Justice, requires the supply of 300 Telematics Fuel Monitoring Device Kits, specifically Part Number KITO759 Master-System-A. Each kit must be complete with fill rings, RFID modules, base modules, 15-foot extension cables, OBD11 cables, wake-up wires, installation hardware, and instructions. All provided equipment must comply with the Buy American, Free Trade Agreements, and Israeli Trade Act regulations. The completed kits are to be delivered to Bastrop, Texas, to support prime contractors on UNICOR Bastrop AIMS Units projects. This opportunity is designated as a total Small Business Set Aside under NAICS code 334418. The response deadline for this requirement is November 4, 2026.

Inc Federal Prison Industries

POSTED

DEADLINE

Circuit Card Assembly Repair and Overhaul Services

Navsup Weapon Systems Support

POSTED

DEADLINE

Instrumentation Component Supply

Oil & Gas Development Company Limited (OGDCL)

POSTED

DEADLINE

Circuit Card Assembly (CCA) Fabrication and Assembly

SPRMM1 DLA Mechanicsburg

POSTED

DEADLINE

Circuit Card Assembly Repair and Modification Services

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Manufacturing of Special Purpose Electrical Cable AssembliesThis subcontract involves the manufacturing of high-precision, special-purpose electrical cable assemblies for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The project requires the fabrication of assemblies specifically to NSN 5995-01-693-3733 and Kongsberg P/N 60269836-02 specifications. All deliverables must adhere to Critical Application Item quality standards and DLA Master List requirements, with the final delivery consisting of completed and warranted cable assemblies. To be eligible for this contract, providers must hold approved source status or possess written authority from Kongsberg. The opportunity is categorized under NAICS code 334418 and is managed by the Department of Defense. Interested parties must submit their responses by the deadline of November 12, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Electronics Fabrication of Frequency Module AssembliesThis subcontract, managed by the DLA Weapons Support Maritime Supply Chain under the Department of Defense, involves the precision assembly and fabrication of frequency module assemblies. The scope of work specifically includes PCB assembly and component integration for Hamilton Sundstrand part number 690416. All deliverables must undergo rigorous testing and quality sampling in accordance with MIL-STD-1916 or ASQ H1331 standards. To ensure compliance and security, the contractor must maintain CMMC Level 2 certification and adhere to MIL-STD-129 and ASTM D3951 for packaging and marking. The final deliverables consist of completed, tested, and packaged Frequency Module Assemblies to be performed at Hill AFB. The response deadline for this opportunity is November 9, 2026.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Circuit Card Assembly (P/N 9800-96605-0002) SupplyThis subcontract, issued by the DLA Weapons Support Active Devices Division of the Department of Defense, requires the supply of five units of Circuit Card Assembly, part number 9800-96605-0002. These assemblies, identified by NSN 5998016919292, are intended for prime contractors working on DoD and MARAD projects. The selected provider must utilize appropriate circuit board fabrication and assembly equipment to manufacture or source the units. The contract mandates strict adherence to Critical Application Item quality standards and requires compliance with specific defense telecommunications equipment restrictions. Performance for this requirement is located in Tracy, California, under NAICS code 334418. Responses to this solicitation are due by November 9, 2026.

DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

DEADLINE

Special Purpose Electrical Cable Assembly FabricationThis subcontract involves the fabrication of three special purpose electrical cable assemblies for the DLA Weapons Support ASC Commodities Division. The manufacturer is required to produce the assemblies according to NSN 5995-01-545-7010 and Amentum P/N 127267-10, ensuring all items are marked per RQ017. Quality assurance must be maintained through sampling and inspection conducted in accordance with MIL-STD-1916 or ASQ H1331. The project is categorized under NAICS code 334418 and will be performed in New Cumberland. To be eligible, the contractor must provide a CMMC Level 2 self-assessment and maintain compliance with DFARS Buy American regulations. The response deadline for this opportunity is November 4, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Supply of Flame Retardant Tape (4 Inch 398FR)This subcontract involves the supply of 8,000 rolls of 4-inch flame retardant tape for prime contractors supporting the Department of Defense. The materials must strictly adhere to the 398FR flame retardancy specification and correspond to NSN 7018900979. The final order is to be delivered to the designated DLA destination in Cherry Point, North Carolina. Eligible providers must maintain an active SAM registration, including a valid Unique Entity ID and CAGE code. This opportunity is managed by the DLA Fleet Readiness Center DLA PSC under NAICS code 334418, with a response deadline set for November 4, 2026.

DLA FLEET READINESS CENTER DLA PSC

POSTED

DEADLINE

Special Cable Assembly Supplier (NSN 5995012034456)This subcontract involves the manufacture or sourcing of four special cable assemblies for the DLA Weapons Support ASC Commodities Division. All units must be produced according to the technical data package specifications for NSN 5995012034456. The contractor is responsible for ensuring that all items are marked in accordance with MIL-STD-129 and packaged and palletized following RP001 DLA Packaging Requirements. Final delivery of the assemblies is required at the DLA Distribution DDSP New Cumberland Facility. To facilitate payment, the supplier must maintain an active SAM registration for invoicing through the Wide Area Workflow system. The opportunity is categorized under NAICS code 334418, with a response deadline set for November 4, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 22 hours ago

DEADLINE

in 7 days

AI Contract Overview

The contract involves the manufacture and delivery of 49 units of the Holder Assembly (NSN/Part Number 5977-00-695-6311) for the Department of Defense through the Defense Logistics Agency. The scope encompasses design validation, fabrication, quality control, packaging, and final delivery, all conducted in strict compliance with military standards. The contract falls under NAICS code 334418, indicating the industry related to electronic manufacturing services. Issued as a subcontract, the solicitation was posted on June 11, 2026, with a response deadline set for June 16, 2026. While specific details about the place of performance and point of contact are not provided, the contract emphasizes adherence to rigorous quality and compliance requirements to ensure the Holder Assemblies meet all defense-related specifications. Interested parties were directed to submit responses via the Defense Logistics Agency’s online portal.

General Info

Manufacture and delivery of 49 Holder Assemblies meeting military standards for Department of Defense.

Agency

Department Of Defense → Defense Logistics Agency

NAICS

334418 - Printed Circuit Assembly (Electronic Assembly) Manufacturing

Place of Performance

USA

Set-Aside

NONE

Documents

This scope was carved out of SPE4A6-26-T-54X0.

The full solicitation package (2 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

HOLDER ASSEMBLY, ELE

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed

PostedJun 11

subcontract

Response DeadlineJun 16

Deadline has passed

Submission Closed

06/16/2026, 05:00:00 PM UTC

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → Defense Logistics Agency

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → Defense Logistics Agency

Office AddressN/A

ContactsNo contact information available

Full Description

Manufacture and delivery of 49 units of a Holder Assembly (NSN/Part Number 5977-00-695-6311), including design validation, fabrication, quality control, packaging, and delivery in compliance with military standards.