Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Manufacturing and Supply of 93.3mm² Static/Ground/Earth Wire

Active

State & Local

Response Deadline11/19/2026, 08:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves the manufacture and supply of 217,754 units of 93.3mm² Aluminum-Steel static, ground, and earth wire for prime contractors working on California High-Speed Rail Authority projects. The fabrication of these conductors must strictly adhere to SNCF reference 0.841.6742 and IGTE 21461/200014 standards in accordance with EN 50182:2001. To ensure quality and regulatory adherence, the provider is required to perform qualification tests and issue Certificates of Compliance. A critical requirement of this agreement is full Buy America Compliance pursuant to 49 U.S.C § 22905. The performance of the contract is centered in Wasco, California. Interested parties must note the response deadline of November 19, 2026, for this procurement effort categorized under NAICS code 334418.

General Info

Supply 217,754 aluminum-steel wires for California High-Speed Rail, ensuring Buy America compliance.

Agency

California High-Speed Rail Authority

NAICS

334418 - Printed Circuit Assembly (Electronic Assembly) Manufacturing

Place of Performance

Wasco, CA, 93280, USA

Set-Aside

NONE

Documents

This scope was carved out of HSR26-39.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

OCS Aluminum Conductors

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 28

subcontract

Response DeadlineNov 19

Submission deadline

Response Deadline

11/19/2026, 08:00:00 PM UTCin 21 days

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyCalifornia High-Speed Rail Authority

ContactsNo contacts available

OfficeN/A

Organization / AgencyCalifornia High-Speed Rail Authority

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Manufactures and supplies Aluminum-Steel 93.3mm² static/ground/earth wire for prime contractors on California High-Speed Rail Authority projects. Fabricates conductors meeting SNCF reference 0.841.6742 and IGTE 21461/200014 per EN 50182:2001. Performs qualification tests and provides Certificates of Compliance. Must be Buy America Compliant (49 U.S.C § 22905). Delivers 217,754 units of compliant wire.

Similar Contracts

Same NAICS industry code

Sleeve Bushing SupplierThis subcontract involves the procurement of 462 sleeve bushings under NSN 014718800 for the DLA Weapons Support ASC Commodities Division. The selected supplier is responsible for manufacturing or sourcing these components to meet strict NSN specifications while ensuring full compliance with the Buy American Act and the Berry Amendment. All items must undergo quality inspections at the origin and be packaged according to MIL-STD-2073-1E and MIL-STD-129 standards. The contractor must maintain ISO 9001:2015 certification to ensure quality management consistency. Performance for this contract is centered in Cherry Point, and the procurement falls under NAICS code 334418. The response deadline for this opportunity is November 6, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 1 hour ago

DEADLINE

Supply of Motor-Tachometer (NSN 6105-01-070-2527)

SPRMM1 DLA Mechanicsburg

POSTED

about 6 hours ago

DEADLINE

Circuit Card Assembly (CCA) Fabrication and AssemblyThis subcontract involves the fabrication and assembly of Circuit Card Assemblies for prime contractors supporting NAVSUP WSS and DLA projects. The scope of work includes fabricating printed circuit boards, assembling electronic components, and integrating hardware, software, and firmware to maintain the total equipment baseline configuration for specific National Stock Numbers 8145-002609548, 8145-012622982, and 8145-012622998. The contractor is responsible for delivering 100 completed units while ensuring strict adherence to BAA and TAA compliance and the application of Unique Item Identifiers. Managed under NAICS code 334418 for the Department of Defense via DLA Aviation At Philadelphia, the project requires precise technical integration to meet military specifications.

Pa DLA Aviation At Philadelphia

POSTED

about 6 hours ago

DEADLINE

Manufacturing of Circuit Card Assemblies (NSN 4920-01-573-4577)This subcontract involves the manufacture and supply of two newly produced Circuit Card Assemblies (NSN 4920-01-573-4577) for prime contractors supporting NAVAIR and DLA procurement projects. The scope of work includes the fabrication and assembly of circuit cards according to the total equipment baseline configuration, encompassing all necessary hardware, software, and firmware. Performance is managed under the Department of the Navy through the DLA Aviation office in Philadelphia. The contractor is required to perform Product Verification Testing in accordance with DLAD 46.292 and ensure packaging meets MIL-STD-2073 standards. A critical compliance requirement for this effort is the possession of CSI certification per DFARS 252.209-7010. The project falls under NAICS code 334418, with the place of performance located in Philadelphia, Pennsylvania.

Pa DLA Aviation At Philadelphia

POSTED

about 14 hours ago

DEADLINE

in about 1 month

CIRCUIT CARD ASSEMB — 5998015428242 — SPRMM127QGA26

Solicitation # SPRMM127QGA26

This solicitation, issued by the Department of the Navy via DLA Mechanicsburg, is a request for the manufacture and supply of 30 Circuit Card Assemblies (NSN 5998-01-542-8242), divided into two delivery locations of 15 units each. The procurement is governed by the Lowest Price Technically Acceptable (LPTA) criteria, where award is granted to the responsible offeror providing the lowest price among those deemed technically acceptable. The contract requires strict adherence to Technical Data Package (TDP) Version 006 and specifies that the items must be physically identified per MIL-STD-130 and meet ISO 9001 quality standards. Soldering must conform to IPC J-STD-001 Class 2, and the contractor is responsible for 100 percent visual, dimensional, mechanical, and electrical performance testing at the point of origin. Key operational requirements include strict interchangeability standards and specific workmanship criteria for cleaning, wiring, and shielding. Packaging must comply with MIL-STD-2073-1, with specific levels designated for domestic and overseas shipments, and electrostatic discharge protection must meet ANSI/ESD S20.20-2021 if applicable. The contract is a DO-rated order for national defense and requires electronic invoicing through PIEE-WAWF. Offerors must be authorized distributors of the original manufacturer, as refurbished materials are explicitly prohibited. Additionally, the contractor must comply with Buy American and Balance of Payments programs and provide necessary traceability documentation and Item Unique Identification (IUID) reporting.

SPRMM1 DLA Mechanicsburg

POSTED

about 14 hours ago

DEADLINE

in about 1 month

Electrical Plugs and Internal Component SupplyThis subcontract, managed by the Department of Defense under the agency Construction & Equipment Manu & Con, involves the supply of specialized electrical plugs, seals, and internal mechanical components for prime contractors on DLA Troop Support procurement projects. The scope of work includes the manufacture of high-tolerance electrical connectors and internal compressor parts, specifically delivering component kits that adhere to the technical specifications of NSN 1740-01-486-7421. Operating under NAICS code 334418, the contractor is required to provide Safety Data Sheets in accordance with FAR 52.223-3. The place of performance is located in New Cumberland, Pennsylvania. The solicitation was posted on October 28, 2026, with a response deadline set for November 9, 2026.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

DEADLINE

Supply of Dome Lights (NSN 6220123995823)This subcontract opportunity is for the manufacture and supply of 19 dome light units, identified by NSN 6220123995823, to support prime contractors delivering on Department of Defense supply contracts. The selected provider must ensure all items are packaged according to MIL-STD-2073-1E and RP001 standards and marked in compliance with MIL-STD-129. Final delivery of the units is required at the DLA Distribution DDSP New Cumberland Facility. This is a total small business set-aside under NAICS code 334418. Interested parties must maintain an active SAM registration to be eligible for award. The response deadline for this requirement is November 9, 2026.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Manufacturing of QPL Electrical Connector Covers (NSN 5935002218620)This subcontract involves the manufacturing of 1,187 electrical connector covers for the DLA Weapons Support Nuclear Reactor Program. The contractor is responsible for fabricating the covers using precision molding or machining in strict accordance with SAE AS25043 and AS50151 standards. A critical requirement of the project is the absolute prohibition of mercury compounds in the manufacturing process. Quality assurance must be maintained through sampling per MIL-STD-1916 or ASQ H1331, and the contractor must hold QPL certification for NSN 5935002218620. The work is associated with NAICS code 334418 and will be performed at Hill AFB. The response deadline for this opportunity is November 9, 2026.

DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

DEADLINE

Special Purpose Branched Electrical Cable Assembly ManufacturerThis subcontract opportunity is for the manufacture of a single special purpose branched electrical cable assembly for the DLA Weapons Support ASC Commodities Division. The contractor is responsible for fabricating NSN 5995-01-474-0591 according to drawing 12983322, ensuring full adherence to MIL-STD-129 and MIL-STD-2073-1E standards. Performance will take place in Fort Bragg, with a response deadline of November 5, 2026. Strict compliance requirements are in place, including ISO 9001:2015 certification, CMMC Level 2, and ITAR/EAR regulations. Additionally, all materials used in the fabrication process must comply with the Berry Amendment and the Buy American Act. The final deliverable consists of one completed, inspected, and packaged cable assembly.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Supply of Non-Immersion Electrical Heating Elements (NSN 4520013031172)This subcontract opportunity is for the manufacture or procurement of eight non-immersion electrical heating elements, identified by NSN 4520013031172, to support prime contractors delivering to the DLA Dist San Joaquin. The selected provider must ensure all units meet strict technical specifications and adhere to MIL-STD-2073-1E standards for packaging and marking. Eligible applicants are required to possess a valid CAGE code and Unique Entity Identifier. The contract is designated as a Total Small Business Set-Aside under NAICS code 334418, with the place of performance located in Tracy, California. Interested parties must submit their responses by November 9, 2026. This requirement is managed by the Department of Defense to ensure the steady supply of critical electrical components for government operations.

DLA DIST SAN JOAQUIN

POSTED

DEADLINE

Supply of Control Transducers (NSN 6625-00-116-0682)This subcontract involves the manufacture or procurement of six control transducers identified by NSN 6625-00-116-0682 for prime contractors supporting the DLA Weapons Support Maritime Supply Chain. The project requires strict adherence to MIL-STD-129 for marking and RP001 for packaging, while ensuring full compliance with DFARS 252.225-7001 and DFARS 252.204-7012 standards. The contract falls under NAICS code 334418 and specifies the place of performance as Cherry Point. Interested parties must respond by November 9, 2026, to fulfill the delivery of the packaged and marked units to the Department of Defense.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Industrial Fluid Heater Core Assembly SupplierThis subcontract involves the supply of industrial fluid heater core assemblies to prime contractors supporting DLA Troop Support contracts. The supplier is responsible for manufacturing or sourcing parts identical to Young Touchstone Company part number 304044, identified by NSN 4420-01-278-7358. All items must be packaged and marked in strict accordance with MIL-STD-2073-1E and MIL-STD-129 standards, and the supplier must provide comprehensive data packages to facilitate the approval of any alternate parts. The final completed core assemblies are to be delivered to the DDSP New Cumberland Facility in New Cumberland, Pennsylvania. This opportunity falls under NAICS code 334418 and is managed under the Department of Defense. Interested parties must adhere to the response deadline of November 9, 2026.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

More opportunities from California High-Speed Rail Authority

Same awarding agency

Specialized Logistics and Railhead DeliveryThis subcontract for Specialized Logistics and Railhead Delivery supports California High-Speed Rail Authority projects by providing the transport and delivery of heavy conductor reels. The selected provider must utilize heavy-haul equipment to move materials to designated railheads located in Fresno County and Wasco, Kern County. Key operational requirements include coordinating direct handoffs to onsite contractors and maintaining detailed packing sheets for all deliveries. The opportunity is categorized under NAICS code 484220 and was posted on October 28, 2026. Interested parties must submit their responses by the deadline of November 19, 2026. Performance of the contract will primarily take place in Wasco, California.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

Non-Destructive Testing (NDT) for OCS ConductorsThis subcontract involves providing independent non-destructive testing and inspection of aluminum conductors for prime contractors working on California High-Speed Rail Authority projects in Wasco, California. The primary objective is to verify that conductors comply with EN/IEC standards by identifying any existing defects, corrosion, or contamination. The selected provider is responsible for delivering comprehensive certified NDT test reports and formal compliance certifications. To ensure technical quality, all personnel performing the inspections must be certified under ASNT Recommended Practice No. SNT-TC-1A. This opportunity falls under NAICS code 541380, with a response deadline set for November 19, 2026.

Testing Laboratories and Services

POSTED

DEADLINE

Manufacturing and Supply of 288mm² Auxiliary/Feeder WireThis subcontract involves the manufacture and supply of 214,334 units of Aluminum-Steel 288mm² auxiliary and feeder wire for prime contractors working on California High-Speed Rail Authority projects. The performance of the contract will take place in Wasco, California, under NAICS code 332618. The supplier must ensure all conductors are fabricated according to SNCF reference 0.841.6775 and IGTE 21461/200014 per EN 50182:2001 standards. Additionally, the contractor is required to perform First Article Inspection and qualification tests in accordance with EN 13450 and maintain strict adherence to Buy America compliance per 49 U.S.C § 22905.

Other Fabricated Wire Product Manufacturing

POSTED

DEADLINE

OCS Aluminum Conductors

Solicitation # HSR26-39

The California High-Speed Rail Authority is soliciting bids under solicitation HSR26-39 for the procurement of OCS Aluminum Conductors, specifically Aluminum-Steel 288mm2 auxiliary/feeder wire and 93.3mm2 static/ground/earth wire based on the SNCF S220 OCS system. The contract spans two to four years and is executed through three Notices to Proceed covering the First Construction Section, a northern extension from Merced to Madera, and a southern extension from Poplar Avenue to Bakersfield. Materials must be Buy America compliant per 49 U.S.C § 22905 and delivered to railheads in Wasco and Fresno. The award will be granted to the lowest responsible responsive bidder based on the total bid price. The contractor is required to maintain a quality control system and provide a detailed delivery plan within thirty days of the first Notice to Proceed. Quality assurance includes First Article Inspection per EN 13450, ongoing source inspections, and final acceptance at the destination. Each shipment must include a signed Certificate of Compliance detailing conductor type, length, weight, and batch numbers. Bidders must submit a bid bond equal to 10 percent of the total bid amount and provide various certifications, including those for equal employment, non-discrimination, and small business goals. Payments are processed electronically in accordance with the California Prompt Payment Act, with a general 45-day window for undisputed invoices.

Current-Carrying Wiring Device Manufacturing

POSTED

DEADLINE

Specialized Heavy-Haul Logistics (Railhead Delivery)This subcontract for Specialized Heavy-Haul Logistics involves the transportation and direct handoff of heavy copper conductor wire drums for prime contractors working on California High-Speed Rail Authority projects. The scope of work focuses on hauling oversized loads to specific railhead locations within Kern and Fresno Counties, with a primary place of performance in Wasco, California. The selected provider must utilize heavy-duty flatbeds and secure all necessary oversized load permits while maintaining strict compliance with DOT heavy haul standards and U.S. cargo preference regulations. Key deliverables include the verified handoff of materials at designated sites. This opportunity falls under NAICS code 484220, with a response deadline set for November 13, 2026.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

OCS Catenary/Messenger Wire SupplierThis subcontract involves the supply of Bz alloy stranded wire for prime contractors working on California High-Speed Rail Authority projects, specifically for performance in Wasco. The scope of work requires the manufacture of 65mm² Bz wire consisting of 37 strands with a 1.5mm diameter, produced without splices. All materials must be delivered as completed spools or drums of catenary wire. The supplier must ensure strict adherence to technical specifications including SNCF reference 0.841.4210 and IGTE 21461/200012, as well as compliance with IEC 63190:2023 and EN 50182:2001 standards. Additionally, the contract mandates full compliance with Buy America requirements under 49 U.S.C § 22905. The response deadline for this opportunity is November 13, 2026.

Current-Carrying Wiring Device Manufacturing

POSTED

DEADLINE

OCS Contact Wire SupplierThis subcontract opportunity is for the supply of high-conductivity copper tin contact wire to prime contractors working on California High-Speed Rail Authority projects. The selected supplier will manufacture 150mm2 CuSn0.2 wire without splices, ensuring strict adherence to SNCF reference 0.841.3896 and IGTE 21461/000020 and 000022. All materials must comply with EN 50149:2012 and Buy America standards under 49 U.S.C section 22905, with final delivery consisting of completed spools or drums of contact wire. The project is based in Wasco, California, and falls under NAICS code 335931. Interested parties must submit their responses by the deadline of November 13, 2026. This procurement is managed through the California High-Speed Rail Authority to support the critical infrastructure of the state's high-speed rail network.

Current-Carrying Wiring Device Manufacturing

POSTED

DEADLINE

OCS Copper Conductors

Solicitation # HSR26-28

Solicitation HSR26-28 is an Invitation for Bids issued by the California High-Speed Rail Authority for the procurement of OCS Copper Conductors, specifically 65mm2 Bz catenary and messenger wire. The contract requires the supplier to provide a full portfolio of conductors that are Buy America compliant and adhere to international standards including EN 50149:2012, IEC 63190:2023, EN 50182:2001, and EN 50326:2002. Deliveries are slated for Kern and Fresno Counties, with the contractor responsible for the direct handoff of materials to the Authority's onsite contractor at the railhead. The award will be granted to the lowest responsible responsive bidder based on the total contract bid price for years one through three. The procurement process involves rigorous compliance and certification requirements, including a 10 percent bid bond, various federal and state certifications regarding non-discrimination, lobbying, and the Darfur Contracting Act, and a commitment to small business and disabled veteran business enterprise goals. Bidders must submit a comprehensive bid package consisting of a hard-copy sealed bid form and a searchable electronic PDF of all other supporting documents by November 13, 2026. Key operational requirements include the implementation of a quality control marking process, adherence to cargo preference regulations requiring 50 percent of gross tonnage to be shipped via U.S.-flagged vessels, and the provision of workers' compensation insurance with a waiver of subrogation.

Current-Carrying Wiring Device Manufacturing

POSTED

DEADLINE

Specialized Construction Services (Spec 18 50 36)This subcontract involves providing specialized construction services for prime contractors working on California High-Speed Rail Authority projects. The scope of work is strictly governed by CSI Specification Section 18 50 36, requiring the contractor to adhere to all technical specifications and project-specific standards to ensure the successful delivery of specialized installations. The project is located in Tulare, California, and falls under NAICS code 238990. Interested parties must submit their responses by the deadline of December 16, 2026.

All Other Specialty Trade Contractors

POSTED

DEADLINE

in about 2 months

General Construction Support ServicesThis subcontract for General Construction Support Services involves the repair and construction of support facilities for prime contractors working on California High-Speed Rail Authority projects. The scope of work includes the execution of two-phase design-build services and the implementation of sustainable construction practices across Merced, Madera, Fresno, Tulare, Kings, and Kern counties. All work must strictly adhere to Buy America requirements to ensure the successful delivery of transit-related support facilities. The project is categorized under NAICS code 236220 and is centered in Tulare, California. Interested parties should note that the response deadline for this opportunity is December 16, 2026.

Commercial and Institutional Building Construction

POSTED

DEADLINE

in about 2 months

Utility Relocation ServicesThis subcontract for Utility Relocation Services involves performing critical infrastructure movement for prime contractors on California High-Speed Rail Authority projects. The selected contractor will be responsible for relocating water, gas, electric, and telecommunications lines to clear the right-of-way, ensuring all work is coordinated with utility owners and the Authority to meet strict project specifications. The primary objective is the delivery of fully relocated and operational utility infrastructure. The project is located in Tulare, California, and falls under NAICS code 237990. Interested parties must be authorized utility relocation contractors to be eligible. The solicitation was posted on October 28, 2026, with a response deadline set for December 16, 2026.

Other Heavy and Civil Engineering Construction

POSTED

DEADLINE

in about 2 months

Repair And Construction Services Multiple Award Task Order Contracts (MATOC) On-Ramp

Solicitation # HSR26-81

The California High-Speed Rail Authority is soliciting proposals under RFP HSR26-81 to on-ramp additional qualified firms into an existing Multiple Award Task Order Contract (MATOC) for repair and construction services. This initiative specifically aims to expand the Small Business Pool, covering Merced, Madera, Fresno, Tulare, Kings, and Kern counties, and the Utility Relocation Pool for authorized contractors. The contract involves providing construction and two-phase design-build services as a prime contractor, with individual task orders estimated to range in value from 2,000 dollars to 20 million dollars. The overall ordering period for contract holders is five years. The selection process utilizes a two-phase Best Value Tradeoff methodology where non-price factors are significantly more important than price. Phase I evaluates technical acceptability, experience, and past performance, focusing on quality control and risk management plans. Phase II involves a seed project evaluation to assess technical approach and cost reasonableness. Awardees must provide a 50 percent performance bond and a 100 percent payment bond. The contract mandates compliance with Buy America requirements, a 3 percent Disabled Veteran Business Enterprise goal, and various state and federal certifications regarding non-discrimination and equal employment opportunity. Proposals must be submitted as a single PDF via email to the designated point of contact by December 16, 2026.

Commercial and Institutional Building Construction

POSTED

DEADLINE

in about 2 months

Earlier notices in this NAICS code

Posted before this notice, open and closed

Supply of High-Pressure Stainless Steel Multi-Jet Water Meters

Internal Services Department

POSTED

DEADLINE

Supply of 3' x 6' LED Arrow Boards (Pickup Type B)

POSTED

DEADLINE

Panelized Crossover and Turnout Manufacturing

POSTED

DEADLINE

Backflow Prevention Device Supplier

Cosumnes Community Services District

POSTED

DEADLINE

Office Panel System Components Supplier

PROC OA DIVISION OF PURCHASING PROCUREMENTS

POSTED

DEADLINE

Supply of 3P.S.T. Back Connected Knife Switches

Nashville Electric Service

POSTED

DEADLINE

Modular Concessions Stand Fabrication & Supply

Stadium Authority

POSTED

DEADLINE

Portable Changeable Message Signs (PCMS) Manufacturer/Supplier

Dept Of Transportation

POSTED

DEADLINE

Ductile Iron Pipe (DIP) Supplier

City of San José

POSTED

DEADLINE

Base Course Aggregate (ABC) Supplier

Department of Transportation

POSTED

DEADLINE

Aggregate Supplier

Virginia Department of Transportation

POSTED

CLOSED

Supply of VCU-AI Modules (SM 331, 8 AI)

Dallas Area Rapid Transit

POSTED

CLOSED

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS