This Solicitation opportunity from Department Of Defense was posted on May 15, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.
HOSE ASSEMBLY, NONME
Contract Overview
Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.
Active Opportunities Like This One
AI Contract Overview
The contract calls for the procurement of one nonmetallic hose assembly, identified by NSN 4720-01-458-2789 and part number AS115-12E0853, manufactured in accordance with SAE AS115K and SAE AS1339K specifications as of May 2021 and May 2025 respectively. The item is classified as a Performance Review Institute Qualified Products List (QPL) item, requiring supply exclusively from accredited manufacturers or assemblers listed on the eAuditNet QPL. Strict adherence to the DLA Master List of Technical and Quality Requirements is mandatory, with all technical and quality clauses marked by R or I numbers incorporated by reference. The product must not contain any Class I ozone-depleting chemicals, and any proposed substitute chemicals require prior approval unless explicitly authorized by the specification. The hose assembly must be marked and labeled per MIL-STD-129, including manufactured, assembled, or packed date and expiration or inspect/test date, as applicable, with a mandatory shelf-life of 120 months that is non-extendable. Packaging must comply with MIL-STD-2073-1E under QUP 001, using AE preservation method and dry climate control, with palletization adhering to DLA packaging requirements. The item is to be delivered FOB origin within five days of award, with no tolerance for quantity variance, and is destined for Fort Irwin, California, to be received at Building 860, Depot Storage Receipt Warehouse. Inspection and acceptance occur at the destination, using zero-defect sampling methods such as MIL-STD-1916 or comparable zero-based plans, with critical, major, and minor attributes assigned verification levels of VII, IV, and II respectively. All attributes not otherwise defined are treated as major. The contract incorporates standard FAR and DFARS clauses related to equal opportunity, human trafficking, cybersecurity, sustainable products, hazard communication, and contractor information system safeguards, including DFARS 252.204-7012 and 52.240-93. Offerors must possess a valid Unique Entity ID and CAGE code, and represent their small business status accurately, with joint ventures required to disclose all partner UEIs. Invoicing must use WAWF, and payment is governed by standard DoD procedures. The solicitation is issued through DIBBS with a
General Info
Agency
NAICS
Place of Performance
DEPOT ST REC WHSE BLDG 860, FORT IRWIN, CA, 92310-9986, USASet-Aside
Timeline
Submission Closed
Organization & Contact Information
Full Description
HOSE ASSEMBLY, NONMETALLIC.
THIS IS A PERFORMANCE REVIEW INSTITUTE (PRI) QPL ITEM. PRODUCT SUPPLIED
TO THIS SPECIFICATION SHALL BE ASSEMBLED BY AN ACCREDITED MANUFACTURER
OR ASSEMBLING DISTRIBUTOR (FOR ASSEMBLIES) AS LISTED IN THE PRI
QUALIFIED PRODUCTS LIST (QPL) FOR THIS STANDARD. THE QPL IS AVAILABLE AT
WWW.EAUDITNET.COM.
CURRENT COPIES OF APPLICABLE SAE DOCUMENTS MAY BE OBTAINED FROM
SAE (0U583) OR THEIR DISRIBUTORS.
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE
USED NOR INCORPORATED IN ANY ITEMS TO BE
DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION
SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT
DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS.
SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR
APPROVAL UNLESS THEY ARE AUTHORIZED BY THE
SPECIFICATION REQUIREMENTS.
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
RQ002: CONFIGURATION CHANGE MANAGEMENT ENGINEERING CHANGE PROPOSAL
REQUEST FOR VARIANCE (DEVIATION OR WAIVER)
RQ016: COMPONENT QUALIFIED PRODUCTS LISTS (QPL)/QUALIFIED MANUFACTURERS
LISTS (QML). THIS ITEM CONTAINS ONE OR MORE COMPONENTS DEFINED BY A
SPECIFICATION(S) WITH AN ASSOCIATED QUALIFIED PRODUCTS LIST (QPL) OR
QUALIFIED MANUFACTURERS LIST (QML). QUALIFICATION REQUIREMENTS IN
PROCUREMENT NOTE H02 "COMPONENT QUALIFIED PRODUCTS LIST (QPL)/QUALIFIED
MANUFACTURERS LIST (QML)" APPLY.
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPE7M0-26-T-7745
SECTION B
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
SHELF-LIFE MARKINGS REQUIRED PER 5.2.1 OF MIL-STD-129: SHELF-LIFE
MARKINGS SHALL BE SHOWN AS PART OF THE ITEM IDENTIFICATION DATA ON UNIT
PACKS, INTERMEDIATE CONTAINERS, EXTERIOR CONTAINERS, AND UNPACKED ITEMS.
SHELF-LIFE MARKINGS SHALL INCLUDE THE MANUFACTURED, CURED, ASSEMBLED OR
PACKED DATE (APPLY ONE DATE), AND THE EXPIRATION OR INSPECT/TEST DATE,
AS APPROPRIATE.
Shelf-life Additional Requirements
RS030: Shelf-life requirement RS001 for a TYPE I (CODE W) item with a shelf life of 120 months (non-extendable) applies to this item.
IAW BASIC NON GOVT STD SAE AS115K REVISION NR K DTD 05/01/2021 PART PIECE NUMBER: AS115-12E0853
IAW REFERENCE NON GOVT STD SAE AS1339K REVISION NR K DTD 05/01/2025 PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7015527502 0001 EA 1.000
NSN/MATERIAL:4720014582789
DELIVERY (IN DAYS):0005
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:AE CLNG/DRY:1 PRESV MAT:00
WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:C
UNIT CONT:D3 OPI:O
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING
SPE7M0-26-T-7745
SECTION B
PR: 7015527502 PRLI: 0001 CONT’D
REQUIREMENTS FOR PROCUREMENT
BULK BREAK POINT:
W33K09
0703 CS BN CO A DISTRIBUTI
AWCF SSF
DEPOT ST REC WHSE BLDG 860
FORT IRWIN CA 92310-9986
US
RDD(3-POS RDD)/NMCS SHIPMENT. SHIP BY FASTAST TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
W33K09
0703 CS BN CO A DISTRIBUTI
AWCF SSF
DEPOT ST REC WHSE BLDG 860
FORT IRWIN CA 92310-9986
US
MARKFOR
W33K09
0703 CS BN CO A DISTRIBUTI
AWCF SSF
DEPOT ST REC WHSE BLDG 860
FORT IRWIN CA 92310-9986
US
M/F: (TCN) W33K0960410169
RDD: N
PROJ: TP 1
SUPP ADD: W9046W SIG: C
FOR GOVERNMENT USE ONLY: (IPD) 02
DIC: A0A DIST: V ADV: FC: Z9
Need Ship Date:00/00/0000 Original Required Delivery Date:02/13/2026
SPE7M0-26-T-7745 NSN/Part Number: 4720-01-458-2789 Quantity: 1 EA Purchase Request: 7015527502QTY: 1 Delivery: 5 days ADO
More opportunities from Department Of Defense → MARITIME SUPPLY CHAIN ESOC BUYS
Same awarding agency
Find Active Opportunities Like This
Get AI-powered intelligence on the opportunities still open
Every page of the solicitation package shredded into a compliance breakdown
AI-powered matching based on your capabilities and past performance
Competitor and incumbent history on the requirement
Automated alerts on amendments, Q&A deadlines, and award
Join 650+ contractors already using CLEATUS