Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Supply of Nickel-Copper Alloy Stock

Active

Federal

Response Deadline11/03/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves the supply of raw Nickel-Copper alloy stock, provided as certified bars or tubing, to prime contractors supporting DLA Land and Maritime supply contracts. The materials are specifically intended for the machining of pump shaft sleeves and must meet strict maritime grade specifications. To ensure quality and compliance, the supplier is required to provide Mill Test Reports and material certifications, while adhering to Buy American or Free Trade Agreement requirements. Managed under the Department of Defense through the Maritime Supply Chain ESOC Buys, the contract falls under NAICS code 336413. The raw alloy material is to be delivered directly to the manufacturer, with the place of performance located in New Cumberland. The solicitation was posted on October 29, 2026, with a response deadline of November 3, 2026.

General Info

Supply of certified Nickel-Copper alloy stock for maritime pump shaft sleeves in New Cumberland.

Agency

Department Of Defense → MARITIME SUPPLY CHAIN ESOC BUYS

NAICS

336413 - Other Aircraft Parts and Auxiliary Equipment Manufacturing

Place of Performance

NEW CUMBERLAND, PA, 17070-5002, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE7M0-26-T-7042.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

SLEEVE, SHAFT, PUMP

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 29

subcontract

Response DeadlineNov 3

Submission deadline

Response Deadline

11/03/2026, 05:00:00 PM UTCin 5 days

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → MARITIME SUPPLY CHAIN ESOC BUYS

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → MARITIME SUPPLY CHAIN ESOC BUYS

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supplies raw Nickel-Copper alloy stock for prime contractors delivering DLA Land and Maritime supply contracts. Provides certified alloy bars or tubing suitable for machining pump shaft sleeves. Provides Mill Test Reports and material certifications ensuring maritime grade specifications. Complies with Buy American or Free Trade Agreement requirements. Delivers raw alloy material to the manufacturer.

Similar Contracts

Same NAICS industry code

Hartzell Propeller Replacement Parts SupplyThis subcontract for the Texas Department of Transportation involves the supply of genuine OEM replacement parts and hardware necessary for the overhaul of Hartzell Propeller Assembly PN: HC-E4N-3G. The scope of work includes sourcing all components required for Service Bulletin compliance and ensuring that all parts are certified for aviation use with FAA Form 8130-3 or an equivalent certification. The selected provider is responsible for delivering all necessary replacement components directly to the overhaul facility, with all parts covered by the manufacturer's standard warranty. This procurement falls under NAICS code 336413 and supports prime contractors working on TxDOT aviation projects.

Texas Department of Transportation

POSTED

about 6 hours ago

DEADLINE

Hartzell Propeller Overhaul and CertificationThis subcontract involves the complete overhaul and certification of a Left Hand Hartzell Propeller Assembly (PN: HC-E4N-3G) for prime contractors working on Texas Department of Transportation aviation projects. The selected provider must perform comprehensive diagnostic evaluations and overhaul procedures in strict accordance with Hartzell manufacturer specifications and Service Bulletins to ensure the assembly is restored to a fully airworthy condition. To qualify for this project, the contractor must operate an FAA-certified repair station and possess aviation-grade diagnostic tools. The final deliverable is one fully overhauled and certified propeller assembly. This opportunity is categorized under NAICS code 336411 and is associated with the Texas Department of Transportation.

Texas Department of Transportation

POSTED

about 6 hours ago

DEADLINE

Propeller Overhaul with Service Bulletin Compliance on N200RR for TxDOT's Aviation Division

Solicitation # 601440000054841

The Texas Department of Transportation (TxDOT) has issued solicitation 601440000054841 for the overhaul of a Left Hand Hartzell Propeller Assembly, part number HC-E4N-3G, serial number HH3925, for aircraft N200RR. This firm, fixed-price contract requires the vendor to provide all diagnostic charges, labor, and parts necessary for the repair, ensuring full compliance with applicable Service Bulletins. The overhauled assembly must be delivered F.O.B. Destination to the Austin Bergstrom International Airport. This is an Invitation for Bids where the award is primarily based on the lowest responsive bid that meets all specifications. Evaluation may also consider best value factors such as life cycle costs, quality, reliability, and past vendor performance. Responses must be submitted in PDF or Excel format to Darren Furgerson by November 2, 2026. The contract is governed by TxDOT Terms and Conditions, requiring vendors to maintain specific commercial general liability, automobile, and workers compensation insurance with a waiver of subrogation in favor of the agency. Payment is processed monthly via warrant or direct deposit, typically within thirty days of receiving a correct invoice.

Texas Department of Transportation

POSTED

about 6 hours ago

DEADLINE

Aircraft Wing Trailing Edge Panel SupplyThis subcontract, issued by the Department of Defense under the DLA Weapons Support ASC Supplier OE and AF Div, requires the manufacture or procurement of three aircraft wing trailing edge panels. The specific component is part number 34-1280-521, identified by NSN 1560008597725, and must be produced in strict accordance with Drawing NR 98748 9485265 Revision C and TDP Rev B Gen 2. Deliverables include the completed panels along with essential quality documentation, specifically Certificate of Quality Compliance and DD Form 1423s. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 336413, with the place of performance located at Tinker AFB. Interested parties must respond by November 6, 2026. This project supports prime contractors involved in aircraft component procurement to ensure the availability of critical wing assembly parts.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 10 hours ago

DEADLINE

Supply of Aircraft Ground Servicing Covers (NSN 1730017235267)This subcontract involves the manufacture or procurement of nine aircraft ground servicing covers, identified by NSN 1730017235267, for prime contractors supporting Department of Defense DLA supply contracts. The provider must ensure all units adhere to the DLA Master List of Technical and Quality Requirements and follow ASTM D3951 and MIL-STD-129 standards for packaging and marking. Final delivery is required at DLA Distribution DDSP New Cumberland. Compliance requirements for this engagement include adherence to the Buy American Act and a completed CMMC Level 2 self-assessment. The contract falls under NAICS code 336413 and is managed through the Department of Defense. Interested parties must meet the response deadline of November 9, 2026.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 10 hours ago

DEADLINE

Supply of Structural Aircraft Plates (NSN 1560-01-632-1615)This subcontract involves the supply of eight structural aircraft plates meeting NSN 1560-01-632-1615 specifications for prime contractors supporting DLA supply contracts. The selected provider must manufacture or source the plates and ensure they are packaged according to TQ IP025 or ASTM D3951 standards. Additionally, the contractor must maintain ISO 9001:2015 certification and guarantee strict compliance with DFARS 252.223-7008 regarding the use of hexavalent chromium. The contract is issued by the Department of Defense under the DLA Weapons Support ASC Supplier Oper OEM Division. While the place of performance is listed in San Diego, the final delivery destination for the units is Cherry Point, North Carolina. Interested parties must submit their responses by November 6, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 10 hours ago

DEADLINE

Supply of Spring Tie Rods (NSN 1560-00-221-1214)This subcontract, issued by the Department of Defense under the DLA Weapons Support ASC Supplier Oper AE and AF Div, requires the procurement of 4,000 spring tie rods identified by NSN 1560-00-221-1214. The selected provider must manufacture or source these specialized aircraft hardware components in strict accordance with NSN technical specifications and DFARS 252.223-7008. Performance will take place at Robins Air Force Base, with materials packaged according to TQ requirement IP025 and FED-STD-313. To ensure quality and compliance, the contractor must maintain inspection systems that adhere to SAE AS9003 or ISO 9001 standards. This opportunity is designated as a Total Small Business Set-Aside under NAICS code 336413. Interested parties must submit their responses by November 6, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 10 hours ago

DEADLINE

Supplier of Aircraft Ground Servicing Shields (NSN 1730009334686)This subcontract, issued by Construction and Equipment MRO SVC I for the Department of Defense, requires the manufacture or procurement of 52 aircraft ground servicing shields identified by NSN 1730009334686. The selected supplier will support prime contractors delivering DLA supply contracts, with performance taking place at Tinker AFB. The project mandates strict adherence to packaging standards per DLA RP001 and the removal of government identification according to RQ011. The contract is designated as a Total Small Business Set-Aside under NAICS code 336413. Compliance is required for several critical federal regulations, including DFARS 252.204-7012, DFARS 252.223-7008 regarding Hexavalent Chromium, and the Buy American requirements of DFARS 252.225-7001. The response deadline for this opportunity is November 9, 2026.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 10 hours ago

DEADLINE

Supply of Actuating Cylinders (NSN 1650-0151-25143)This subcontract involves the manufacture or sourcing of six actuating cylinders, specifically identified by NSN 1650-0151-25143, to support prime contractors fulfilling Department of Defense requirements. Managed by the DLA Weapons Support ASC Supplier Oper AE and AF Div, the contract mandates strict adherence to DLA quality standards for aerospace components to ensure operational reliability. Logistics for the delivery of these units are coordinated under First Destination Transportation program terms with shipping handled as FOB Origin. The place of performance is located in Tracy, California, and the procurement falls under NAICS code 336413.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 10 hours ago

DEADLINE

Supply of Doubler (NSN 1560LLNC09669)This subcontract involves the procurement of one Doubler, identified by NSN 1560LLNC09669, to support prime contractors fulfilling DLA supply contracts. The selected provider is responsible for manufacturing or sourcing the component in strict accordance with established technical specifications and the DLA Master List of Technical and Quality Requirements. Additionally, the item must be packaged and labeled according to RP001 DLA Packaging Requirements for Procurement. The contract is issued by the Department of Defense through the DLA Fleet Readiness Center DLA PSC, with performance taking place in Cherry Point. Eligible bidders must maintain a valid CAGE code and active SAM registration. The response deadline for this requirement is November 6, 2026.

DLA FLEET READINESS CENTER DLA PSC

POSTED

about 10 hours ago

DEADLINE

Fuel Pump Housing Supplier (NSN 2910013515941)This subcontract involves the manufacture or procurement of one Fuel Pump Housing, identified by NSN 2910013515941, to support prime contractors under the DLA Weapons Support Land Supply Chain. The selected supplier is responsible for ensuring the component is properly marked according to MIL-STD-129 and packaged and palletized in compliance with RP001 DLA Packaging Requirements for Procurement. The project falls under NAICS code 336413 and is managed by the Department of Defense. Performance will take place in Mechanicsburg, Pennsylvania. Interested parties must respond by the deadline of November 9, 2026.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 10 hours ago

DEADLINE

Manufacture of Aircraft Structural Panels (NSN 1560016480313)This subcontract involves the manufacture of seven finished structural aircraft panels for prime contractors under a Department of Defense DLA Weapons Support ASC supply contract. The work requires the fabrication of panels according to specific technical drawings 81205 25-8805, 81205 BACD2021, and 98748 20145214 using precision machining and forming equipment. Performance will take place at Tinker AFB. The contractor must adhere to strict quality and security standards, including ISO 9001:2015, CMMC Level 2, and the US/Canada Joint Certification Program. All special processes must be NADCAP-approved, and quality inspections must be performed in accordance with MIL-STD-1916 or ASQ H1331. The solicitation was posted on October 29, 2026, with a response deadline of November 6, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 10 hours ago

DEADLINE

More opportunities from Department Of Defense → MARITIME SUPPLY CHAIN ESOC BUYS

Same awarding agency

Supply of Nonmetallic Hoses (NSN 4720-01-610-7162)This subcontract involves the supply of 20 nonmetallic hoses for prime contractors supporting DLA Land and Maritime supply contracts. The contractor is responsible for manufacturing or sourcing items that strictly adhere to NSN 4720016107162, with packaging completed according to MIL-STD-2073-1E and RP001 DLA Packaging Requirements. Eligible providers must hold Small Business certification and be capable of delivering the units via FOB Origin within a five-day turnaround. The performance of this contract is centered in Chesapeake, Virginia, under the oversight of the Department of Defense Maritime Supply Chain ESOC Buys.

Rubber and Plastics Hoses and Belting Manufacturing

POSTED

about 10 hours ago

DEADLINE

Manufacture and Supply of Nickel-Copper Alloy Pump Shaft SleevesThis subcontract involves the manufacture and supply of 42 precision-machined pump shaft sleeves, identified by NSN 4320010625720, for prime contractors supporting Department of Defense Maritime Supply Chain ESOC Buys. The components must be fabricated from Nickel-Copper Alloy to a 4-inch overall length using precision CNC lathes and inspection tools, with a strict prohibition on additive manufacturing. All units must undergo Product Verification Testing in accordance with DLAD 46.292 to ensure compliance with DLA Land and Maritime standards. The work is to be performed in New Cumberland, Pennsylvania, under NAICS code 332710.

POSTED

about 10 hours ago

DEADLINE

RESTRICTOR UNIT, FLUID

Solicitation # SPE7M0-27-T-0149

Solicitation SPE7M0-27-T-0149 is a request for quotations issued by DLA Land and Maritime for the procurement of one Fluid Flow Restrictor Unit, identified as Fairbanks Morse LLC part number M99013732 and NSN 4730-01-738-3459. The requirement is for the USS Harrisburg LPD-30, with a required delivery date of October 2, 2026, and a delivery lead time of five days after order. Shipping is designated as FOB Origin, with the final freight destination located at Huntington Ingalls Inc. in Gulfport, Mississippi. The contractor must adhere to strict packaging and marking standards, specifically ASTM D3951 and MIL-STD-129, while ensuring that DLA Master List Technical and Quality Requirements and RP001 palletization standards take precedence. Inspection and acceptance will occur at the destination per FAR 52.246-2. Administrative requirements include the use of the Wide Area Workflow system for electronic invoicing and payment requests. The solicitation also mandates compliance with the Buy American Act, the Berry Amendment, and various cybersecurity and hazardous material labeling regulations.

Fluid Power Valve and Hose Fitting Manufacturing

POSTED

about 10 hours ago

DEADLINE

SLEEVE, SHAFT, PUMP

Solicitation # SPE7M0-26-T-7042

Solicitation SPE7M0-26-T-7042 is a small business set-aside for the procurement of 42 pump shaft sleeves manufactured from nickel-copper alloy with an overall length of 4 inches. The contract is issued by the DLA Land and Maritime, Maritime Supply Chain ESOC Buys, and specifies a delivery period of 133 days after the order date, with a required delivery date of July 1, 2024. Delivery is FOB Origin to the DLA Distribution DDSP New Cumberland facility in Pennsylvania. Key technical and quality requirements include adherence to basic drawing 16236 CS-4320-SV-0781 Revision B and the prohibition of additive manufacturing processes. Product Verification Testing is invoked per DLAD 46.292, requiring the contractor to notify the DCMA QAR 30 days prior to delivery. The contractor must maintain a calibration system meeting ANSI/NCSL Z540-1-1994 or ISO 10012-1 and ensure the manufacturer's inspection system complies with SAE AS9003 or ISO 9001. Additionally, the contract strictly prohibits the intentional use of mercury or class I ozone-depleting chemicals. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, and all invoicing must be processed through the Wide Area WorkFlow system.

Fluid Power Pump and Motor Manufacturing

POSTED

about 10 hours ago

DEADLINE

HOSE, NONMETALLIC

Solicitation # SPE7M0-26-T-051B

Solicitation SPE7M0-26-T-051B is a small business set-aside request for quotations issued by the DLA Land and Maritime Maritime Supply Chain ESOC Buys for the procurement of 20 units of nonmetallic hose, identified by NSN 4720016107162. The contract specifies a delivery timeline of five days after receipt of order with shipping terms set as FOB Origin. Delivery is to be made to VSE Corporation in Chesapeake, Virginia. The procurement is governed by NAICS code 326220 and includes specific technical and quality requirements under RA001, as well as strict prohibitions against the use of Class I ozone depleting chemicals and the intentional addition of mercury. The contract mandates adherence to MIL-STD-2073-1E for packaging and MIL-STD-129 for marking, with palletization following RP001 requirements. Administrative processing, including invoicing and receiving reports, must be conducted through the Wide Area WorkFlow system. Key regulatory compliance includes the Buy American Act, the Berry Amendment, and various DFARS clauses regarding cybersecurity, the prohibition of covered defense telecommunications equipment, and the safeguarding of covered defense information. Evaluation for award may include a HUBZone price preference, and the submission of a Safety Data Sheet is required to determine offeror responsibility.

Rubber and Plastics Hoses and Belting Manufacturing

POSTED

about 10 hours ago

DEADLINE

Supply of Variable Wire Wound Resistors (NSN 5905008063043)This subcontract, managed by the Department of Defense under the Maritime Supply Chain ESOC Buys, involves the procurement of one unit of nonprecision variable wire wound resistors, specifically NSN 5905008063043. The contractor is responsible for sourcing and delivering Bourns Inc part number 3057J-2-203, ensuring that the components meet all DLA Master List technical specifications. The agreement mandates strict adherence to environmental and logistical standards, requiring that all items be free of Class I ozone-depleting substances. Additionally, the delivery must comply with MIL-STD-2073-1E and MIL-STD-129 packaging standards. Performance for this contract is designated for FPO 96694-2900 under NAICS code 423610.

Electrical Apparatus and Equipment, Wiring Supplies, and Related Equipment Merchant Wholesalers

POSTED

DEADLINE

Pump Shaft Sleeve Supplier (NSN 4320-01-123-0197)This subcontract involves the procurement of one Pump Shaft Sleeve to support prime contractors on DLA Land and Maritime supply contracts. The supplier is responsible for sourcing or manufacturing the component to strictly adhere to NSN 4320-01-123-0197 and approved part numbers Curtiss-Wright Electro-Mechanical P/N PL-11530-F-18 ITEM 440 or P/N Y-156D440EX3A. Managed by the Department of Defense under the Maritime Supply Chain ESOC Buys, the contract falls under NAICS code 332510. A critical requirement of this agreement is the expedited delivery of the physical sleeve to Manchester, New Jersey, which must be completed within five days of the order.

Hardware Manufacturing

POSTED

DEADLINE

SLEEVE, SHAFT, PUMP

Solicitation # SPE7M0-26-T-9435

Solicitation SPE7M0-26-T-9435 is a request for quotations issued by the Department of Defense, specifically the DLA Land and Maritime Maritime Supply Chain ESOC Buys, for the procurement of one pump shaft sleeve identified by NSN 4320-01-123-0197. The requirement specifies a delivery timeline of five days after the order is placed, with the destination and acceptance point located at W8VP NJ ARNG CSMS 1 in Manchester, New Jersey. The procurement is categorized under NAICS code 333914 and includes specific approved part numbers from Curtiss-Wright Electro-Mechanical. The contract mandates strict adherence to packaging and marking standards, requiring compliance with ASTM D3951 and MIL-STD-129, while noting that the DLA Master List of Technical and Quality Requirements takes precedence over ASTM standards. Palletization must follow RP001 requirements. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and payment. Key regulatory clauses are incorporated, including the Buy American and Balance of Payments Program, safeguarding of covered defense information under DFARS 252.204-7012, and prohibitions on the acquisition of certain telecommunications equipment. Evaluation for award will consider the HUBZone price evaluation preference, and offers utilizing additive manufacturing are ineligible unless specifically authorized.

Measuring, Dispensing, and Other Pumping Equipment Manufacturing

POSTED

DEADLINE

RESISTOR, VARIABLE, W

Solicitation # SPE7M0-26-T-073A

Solicitation SPE7M0-26-T-073A is a fixed-price procurement issued by the Department of Defense, specifically the Maritime Supply Chain ESOC Buys under DLA Land and Maritime. The contract is for the supply of one non-precision, wire-wound variable resistor, identified by NSN 5905-00-806-3043 and Bourns Inc part number 3057J-2-203. The required delivery is within five days after receipt of order, with the place of performance located in FPO, ZIP 96694-2900. Inspection and acceptance will occur at the destination. The procurement is governed by NAICS code 334416 and includes strict adherence to DLA packaging and marking standards, specifically MIL-STD-2073-1E and MIL-STD-129. Technical and quality requirements are managed through the DLA Master List, including specific mandates for physical identification and the prohibition of Class I ozone-depleting substances. Offerors must be registered in the System for Award Management and utilize the Wide Area Workflow system for electronic invoicing. Alternate offerors are required to submit a complete data package for evaluation. The contract incorporates various FAR and DFARS clauses, including those regarding the Buy American Act, cybersecurity safeguarding, and equal opportunity for workers with disabilities.

Capacitor, Resistor, Coil, Transformer, and Other Inductor Manufacturing

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS