HOSE ASSEMBLY, NONME

HOSE ASSEMBLY,NONME
HOSE ASSEMBLY,NONMETALLIC
EXCEPTIONS TO DRAWING 8327160 REV.J: NOTE 1: USE MIL-DTL-13531 IN LIEU
OF MIL-H-13531. DELETE NOTE 5 AND SUBSTITUTE: HOSE ASSEMBLIES SHALL BE
TESTED AS SPECIFIED IN MIL-DTL-13531.
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
---------------------------------------------------------------
RQ002: CONFIGURATION CHANGE MANAGEMENT ENGINEERING CHANGE PROPOSAL
REQUEST FOR VARIANCE (DEVIATION OR WAIVER)
RQ016: COMPONENT QUALIFIED PRODUCTS LISTS (QPL)/QUALIFIED MANUFACTURERS
LISTS (QML). THIS ITEM CONTAINS ONE OR MORE COMPONENTS DEFINED BY A
SPECIFICATION(S) WITH AN ASSOCIATED QUALIFIED PRODUCTS LIST (QPL) OR
QUALIFIED MANUFACTURERS LIST (QML). QUALIFICATION REQUIREMENTS IN
PROCUREMENT NOTE H02 "COMPONENT QUALIFIED PRODUCTS LIST (QPL)/QUALIFIED
MANUFACTURERS LIST (QML)" APPLY.
THIS NSN CONTAINS ONE OR MORE COMPONENTS WHICH MUST MEET QPL/QML
REQUIREMENTS. BY SUBMITTING AN OFFER, THE OFFEROR AGREES TO PROVIDE
QPL/QML COMPONENTS ONLY FROM SOURCES QUALIFIED ON THE APPLICABLE
QPL(S)/QML(S).
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
SPE7M4-26-T-221W
SECTION B
CERTIFICATE OF CONFORMANCE PROCEDURES (FAR 52.246-15) ARE AUTHORIZED,
UNLESS WITHELD BY A QUALITY ASSURANCE LETTER OF INSTRUCTION.
FULL AND OPEN COMPETITION APPLY
SHELF LIFE MARKINGS REQUIRED PER 5.2.1 OF MIL-STD-129: SHELF-LIFE
MARKINGS SHALL BE SHOWN AS PART OF THE ITEM IDENTIFICATION DATA ON UNIT
PACKS, INTERMEDIATE CONTAINERS, EXTERIOR CONTAINERS, AND UNPACKED ITEMS.
SHELF-LIFE MARKINGS SHALL INCLUDE THE MANUFACTURED, CURED, ASSEMBLED, OR
PACKED DATE (APPLY ONE DATE), AND THE EXPIRATION OR INSPECT/TEST DATE,
AS APPROPRIATE.
RQ042: Non-Tailored Higher-Level Quality Requirements (ISO 9001:2015) for Manufacturers and Non-Manufacturers
RS026: Shelf-life requirement RS001 for a TYPE I (CODE U) item with a shelf life of 96 months (non-extendable) applies to this item.
CRITICAL APPLICATION ITEM
TDP Rev A Gen 1 IAW BASIC DRAWING NR 19207 8327160 REVISION NR J DTD 02/05/1992 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE DRAWING NR 19207 10876145 REVISION NR DTD 03/07/2025 PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017240034 0001 EA 10.000
NSN/MATERIAL:4720005221449
DELIVERY (IN DAYS):0020
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: ORIGIN
ACCEPTANCE POINT: ORIGIN
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:32 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:EC CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:A
UNIT CONT:ZZ OPI:O
INTRMDTE CONT:ED INTRMDTE CONT QTY:AAA
PACK CODE:Q PACKING LEVEL: B
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPE7M4-26-T-221W
SECTION B
PR: 7017240034 PRLI: 0001 CONT’D
SPECIAL MARKING CODE:32 -32 Type I, shelf life
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
unit container codezz
COIL TO 5.5 X 5.5. UC: BOX EC IN BAG BL
FREIGHT FORWARDER:
BJO002
SERRA INTERNATIONAL INC
MASSIMO DICORI 201-716-4807
301 CRANEWAY STREET
NEWARK, NJ 07114
US
FREIGHT SHIPPING ADDRESS:
BJOA00
GHQ JORDAN ARMED FORCES
DIR OF DEF PROC ROYAL MNT CORP ST
TEL 96265000171 FAX 01196265001189
AMMAN
JO
MARKFOR
BJOA00
GHQ JORDAN ARMED FORCES
DIR OF DEF PROC ROYAL MNT CORP ST
TEL 96265000171 FAX 01196265001189
AMMAN
JO
M/F: (TCN) BJOA5N61680102
RDD: 226
PROJ: TP 2
SUPP ADD: BA2BFM SIG: L
FOR GOVERNMENT USE ONLY: (IPD) 06
DIC: A01 DIST: B01 ADV: 2L FC: YY
Need Ship Date:00/00/0000 Original Required Delivery Date:06/24/2026
SPE7M4-26-T-221W NSN/Part Number: 4720-00-522-1449 Quantity: 10 EA Purchase Request: 7017240034QTY: 10 Delivery: 20 days ADO