Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

HOSE ASSEMBLY, NONME

Active
SPE7M4-26-T-326GFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract specifies the procurement of a nonmetallic hose assembly identified by NSN 4720-00-235-4131 and part number MS52104S-12F, meeting technical requirements per MIL-DTL-13444J and referenced specification MS52104E, with a Type I, 3/4 inch ID, rubber hose constructed for fuel and oil applications. The item is classified as a critical application product with a non-extendable shelf life of 120 months, and must comply with DLA packaging standards and MIL-STD-2073-1E for packaging, including preservative methods and marking per MIL-STD-129 with special code 32 indicating Type I and shelf life. The use of Class I ozone-depleting chemicals is strictly prohibited, and any substitute chemicals require prior approval unless explicitly authorized by the specification. The contractor is required to perform testing to verify compliance, and the qualified products list is applicable for procurement. The total quantity ordered is 771 feet with a 10 percent variance allowed, delivered FOB origin, with inspection and acceptance occurring at the destination. The delivery schedule requires fulfillment within 141 days of contract award, with the original required delivery date set for March 6, 2027, and the needed ship date on January 9, 2027. The item is to be shipped to the DLA Distribution facility at New Cumberland, Pennsylvania, following transportation guidelines outlined in DLAD Proc Note C19 and C20. Packaging must adhere to RP001 DLA requirements, and palletization must conform to specified standards. The contract was issued under solicitation SPE7M4-26-T-326G, posted on August 9, 2026, with responses due by August 20, 2026, and falls under NAICS code 332999. Unit of issue is feet, with a total contract value derived from a per-foot unit price as defined in the CLIN structure. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions controlled by the solicitation issue date or award date depending on acquisition type.

General Info

Procure 771 feet of MIL-DTL-13444J Type I fuel/oil hose, 120-month shelf life, DLA packaging, delivery by Jan 9, 2027.

Agency

Department Of Defense → FLUID HANDLING DIVISIONView Agency

NAICS

332999 - All Other Miscellaneous Fabricated Metal Product ManufacturingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(1)

RFQ SPE7M4-26-T-326G Fluid Handling Division

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → FLUID HANDLING DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → FLUID HANDLING DIVISION
View Agency Profile
Office AddressUS
Contacts
Blake Tushar
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
HOSE ASSEMBLY,NONME
HOSE, NONMETALLIC.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
THIS NSN IS LISTED AS A PRIMARY QPL OR QML
THEREFORE THE QUALIFIED PRODUCTS LIST OR
QUALIFIED MANUFACTURERS LIST IS APPLICABLE.
CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE
USED NOR INCORPORATED IN ANY ITEMS TO BE
DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION
SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT
DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS.
SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR
APPROVAL UNLESS THEY ARE AUTHORIZED BY THE
SPECIFICATION REQUIREMENTS.
RS030: Shelf-life requirement RS001 for a TYPE I (CODE W) item with a shelf life of 120 months (non-extendable) applies to this item.
SPEC TITLED "HOSE AND HOSE ASSEMBLIES, RUBBER:
FUEL AND OIL." CONTRACTOR TESTING REQUIRED.
PART NUMBER MIL-DTL-13444, TYPE I, SIZE 12. 3/4 IN. ID, Feet
CRITICAL APPLICATION ITEM
TDP Rev B Gen 2 IAW BASIC SPEC NR MS52104E(1) NOT 1 REVISION NR E DTD 09/12/2025 PART PIECE NUMBER: MS52104S-12F
TDP Rev B Gen 2 IAW REFERENCE SPEC NR MIL-DTL-13444J(2) REVISION NR J DTD 09/12/2025 PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments%
SPE7M4-26-T-326G
SECTION B
PR: 7017774395 PRLI: 0001 CONT’D
2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017774395 0001 FT 771.000
NSN/MATERIAL:4720002354131
DELIVERY (IN DAYS):0141
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 10% MINUS 10%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:AE CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0
UNIT CONT:D3 OPI:M
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:32 -32 Type I, shelf life
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
Need Ship Date:01/09/2027 Original Required Delivery Date:03/06/2027
SPE7M4-26-T-326G NSN/Part Number: 4720-00-235-4131 Quantity: 771 FT Purchase Request: 7017774395QTY: 771 Delivery: 141 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332999
New
DIBBS
HOSE ASSEMBLY, NONMETAL
Solicitation # SPE7M4-26-T-327A
This contract pertains to the procurement of a nonmetallic hose assembly designated by NSN 4720-01-371-1331 and part numbers AAEA0600, FA2406EGG0633AA, and 23511467, to be supplied by Rolls-Royce Solutions America Inc and Danfoss Power Solutions II LLC. The delivery requirement is for 71 units, with a strict quantity variance of plus or minus zero percent, and delivery must be completed within 165 days from the contract date, FOB origin. Inspection and acceptance are to occur at the destination, and the items must be packaged in accordance with MIL-STD-2073-1E and marked per MIL-STD-129 without any special marking codes. The packaging and palletization must comply with DLA’s packaging requirements, using specified methods for preservation, wrapping, and unit containment as outlined in the contract’s packaging data. The contract is issued under solicitation SPE7M4-26-T-327A with a response deadline of August 20, 2026, and a posted date of August 9, 2026. The end delivery date is set for February 2, 2027, replacing the original required delivery date of January 7, 2027. The delivery destination is DLA Distribution Anniston at 7 Frankford Ave, Building 362, Anniston, AL 36201-4199, with transportation instructions governed by DLAD Proc Note C19 for general shipping and C20 for first destination handling. The unit of issue is each, priced at $71.00 per unit, totaling $5,041. The contract references technical and quality requirements from the DLA Master List, which apply based on solicitation and award timelines. The point of contact is Blake Tushar, and the NAICS code is 332999 for other miscellaneous fabricated metal product manufacturing.
FLUID HANDLING DIVISION

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332999
New
DIBBS
HOSE ASSEMBLY, NONME
Solicitation # SPE7M2-26-T-6163
The contract is for a nonmetallic hose assembly, part number 88043-224 with NSN 4720-01-379-4569, with a total quantity of 30 units, each 360 inches (30 feet) in length. The item is classified as a critical application item and must comply with stringent packaging and handling requirements per MIL-STD-2073-1E and DLA packaging standards. Each hose must be securely mounted on a reel, roll, or spool for safe transport, enclosed in a double-walled, weather-resistant fiberboard container (ASTM-D5118 Type CF), and all openings must be sealed with plastic plugs or end caps to prevent contamination. Packaging must include protective wrapping using code CA to reduce abrasion, and marking must conform to MIL-STD-129 with special codes including “ARROW UP” and “OPEN THIS SIDE.” As protected cargo, the item’s nomenclature must be omitted from outer packaging per MIL-STD-129, paragraph 5.4.1.6. The contract enforces zero tolerance for quantity variance and specifies delivery FOB origin with inspection and acceptance occurring at destination. The supplier must comply with DLA’s technical and quality requirements referenced in the DLA Master List and adhere to CMMC Level 2 self-assessment for cybersecurity. Delivery is due within one day of award, with the original required delivery date of January 26, 2027, and the need ship date set for August 22, 2026. Fulfillment must be shipped to the DLA Distribution facility at 2083 Normandy Drive, New Cumberland, PA 17070-5002. The contractor is obligated to provide shelf life data if applicable and notify the DLA Land and Maritime Contract Administrator for any required updates. The solicitation number is SPE7M2-26-T-6163, issued by the Department of Defense under the Nuclear Reactor Program, with the point of contact being Kirstan Seck.
NUCLEAR REACTOR PROGRAM

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332999
New
DIBBS
HOSE ASSEMBLY, NONME
Solicitation # SPE7L5-26-T-4917
The contract specifies the procurement of a nonmetallic hose assembly, 6 inches in diameter and 12.5 inches long, with part number 3825020 and NSN 4720-01-576-4549, supplied by OSHKOSH DEFENSE LLC. The item is classified as a TYPE I (CODE Y) with a non-extendable shelf life of 180 months, subject to strict shelf-life requirements outlined in RS039. Packaging must comply with MIL-STD-2073-1E and DLA’s packaging standards, including specific preservation methods, wrapping, and containerization codes, while marking adheres to MIL-STD-129 and includes the special marking code 32 for shelf-life identification. The item is to be delivered FOB origin in a quantity of 59 AY units within 151 days, with no tolerance for variance in quantity, and inspection and acceptance occur at the destination. Delivery is directed to DLA Distribution at the New Cumberland facility in Pennsylvania, and transportation follows DLAD procedural notes C19 and C20. The original required delivery date is January 28, 2027, with a need ship date of January 19, 2027, under solicitation SPE7L5-26-T-4917, which was issued on August 9, 2026, and closed for response on August 20, 2026. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced via R and I numbers, with revisions controlled based on acquisition type and solicitation amendments.
LAND SUPPLIER OPNS ENGINES

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332999
New
DIBBS
HOSE ASSEMBLY, NONMETAL
Solicitation # SPE7M4-26-T-327D
This contract is for the procurement of 51 nonmetallic hose assemblies with NSN 4720-12-323-8769 and part number 355.02.0018, under solicitation SPE7M4-26-T-327D, issued by the Department of Defense’s Fluid Handling Division as a total small business set-aside. The unit price is $51.00 per unit, with a total contract value of $2,601, and delivery is required FOB origin within 134 days of the original required delivery date of March 6, 2027, with a needed ship date of January 2, 2027. The quantity variance is strictly zero percent, meaning no overages or shortages are permitted. Inspection and acceptance occur at the destination warehouse located at 25600 S Chrisman Rd, Tracy CA 95304-5000, and all items must comply with ASTM D3951 packaging standards unless overridden by stricter requirements from the DLA Master List of Technical and Quality Requirements, which takes precedence. Packaging and labeling must adhere to MIL-STD-129, and palletization must follow DLA’s RP001 packaging guidelines. The contract specifies that government identification must be removed from non-accepted supplies and identifies qualified suppliers including Vincorion LLC and Vincorion Power Systems GmbH. Transportation instructions reference DLAD Proc Notes C19 and C20, and the unit of issue is each (EA). The point of contact is William Cooley, and the solicitation closed on August 20, 2026, with a NAICS code of 332999.
FLUID HANDLING DIVISION

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332999
New
DIBBS
HOSE, PREFORMED
Solicitation # SPE7M4-26-T-328C
This contract involves the procurement of 35 units of preformed rubber hose with the NSN 4720-00-678-4700 under solicitation SPE7M4-26-T-328C, issued by the Defense Logistics Agency’s Fluid Handling Division. The technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with applicable reference numbers including RA001, RQ002, RQ009, RQ011, RQ017, RQ032, and RP001, which mandate compliance with packaging, inspection at origin, physical identification, configuration change management, export control of technical data, and removal of government identification from non-accepted supplies. The delivery timeline is set for 326 days after contract award, with performance expected at New Cumberland, Pennsylvania, 17070-5002. The technical data associated with this item is subject to U.S. export control regulations under either ITAR or EAR, restricting its disclosure to foreign persons without prior authorization from the Department of State or Department of Commerce, including foreign nationals employed by U.S. entities. Only contractors certified under the US/Canada Joint Certification Program, who have completed required DOD export control training and received formal DLA approval, are permitted access to this controlled data. The solicitation was posted on August 9, 2026, with responses due by August 20, 2026, and is managed through the DIBBS system with Blake Tushar serving as the primary point of contact.
FLUID HANDLING DIVISION

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332999
New
DIBBS
DOOR, HATCH, VEHICLE
Solicitation # SPE7L3-26-T-170K
The contract covers the procurement of nine vehicle hatch doors with the NSN 2510-00-229-4197 under solicitation SPE7L3-26-T-170K, issued by the Department of Defense through the Land Supplier Operations Vehicle Support agency. The delivery is required within five days after award, and responses must be submitted by August 20, 2026. This item is classified as technical data subject to export control under either ITAR or EAR, meaning any disclosure to foreign persons—including U.S. company employees or subsidiaries abroad—is restricted without prior authorization from the Department of State or Commerce. Access to this controlled data is strictly limited to DLA contractors who hold valid US/Canada Joint Certification Program certification, have completed mandatory training on handling DoD export-controlled technical data, passed the DLA Export-Controlled Technical Data Questionnaire, and received formal approval from DLA. The contract is not subject to small business set-asides, and the NAICS code 332999 indicates it falls under miscellaneous manufacturing. Primary point of contact for inquiries is Lee Miller, reachable via phone or email provided.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332999
New
DIBBS
HOSE, NONMETALLIC
Solicitation # SPE7M4-26-T-326W
The contract is for the procurement of four nonmetallic hoses identified by NSN 4720-01-416-6839 and part number 65A1397, under solicitation SPE7M4-26-T-326W. The total quantity required is four units, each priced at $4.00, with delivery required within 20 days from the contract award and FOB origin. Inspection and acceptance occur at the destination, with no variance permitted in quantity. Packaging must comply with ASTM D3951 and MIL-STD-129, and all packaging requirements from the DLA Master List of Technical and Quality Requirements take precedence. The hoses must be palletized according to DLA requirements, with each unit pack designated as QUP 001. Shipping is to be conducted via freight to the Navy Expeditionary Logistics Support Group in Williamsburg, Virginia, using the fastest traceable means—parcel post is prohibited. The delivery must be completed no later than August 7, 2026, with no need for a specified ship date. The contracting office is the Fluid Handling Division of the Department of Defense, with Blake Tushar as the point of contact. All technical and quality standards referenced via R or I numbers are governed by the DLA Master List, and the governing revision depends on the acquisition size and solicitation timeline. Government use codes and logistics identifiers are included for tracking and administrative purposes.
FLUID HANDLING DIVISION

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332999
New
DIBBS
HOSE ASSEMBLY, LOW PRES
Solicitation # SPE7M4-26-T-327Z
This contract specifies the procurement of a low-pressure and vacuum hose assembly identified by NSN 4720-01-022-1504 and part number 1579464, with a requirement for six units to be delivered within 210 days from the contract award. The supply is subject to stringent packaging and labeling standards, requiring compliance with ASTM D3951 and mandatory adherence to MIL-STD-129 for marking, with all technical and quality requirements governed by the DLA Master List of Technical and Quality Requirements, which take precedence over any other standard. Delivery is FOB origin, with inspection and acceptance occurring at the destination, and no variance in quantity is permitted. Packaging must conform to DLA Packaging Requirements for Procurement and include palletization as mandated by RP001, with the unit of issue being a single unit and the quantity per unit pack set at one. The solicitation is a total small business set-aside under NAICS code 332999, with responses due by August 20, 2026, and the contract was posted on August 9, 2026. The required delivery date is March 19, 2027, with shipment directed to the DLA Distribution Depot in Bremerton, Washington. Transportation logistics follow DLAD Proc Notes C19 and C20, and the parcel post address for receiving is also listed in Bremerton, WA. The contract is managed by the Department of Defense’s Fluid Handling Division, with Blake Tushar as the primary point of contact. Only approved suppliers, including Orlotronics Corp and Raytheon Company, are recognized for this part, and full and open competition applies under DLA procurement rules.
FLUID HANDLING DIVISION

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332999
New
DIBBS
SHIM
Solicitation # SPE7L5-26-T-4922
This contract, identified by solicitation number SPE7L5-26-T-4922, pertains to the procurement of a shim part with NSN 5365-01-547-5820 and part number 26001001500, furnished by Fairbanks Morse, LLC, for a quantity of 79 units. All items must comply with DLA packaging requirements as outlined in RP001 and be packaged per MIL-STD-2073-1E with specific methods for preservation, wrapping, and containment, including use of E5 unit containers and OPI labeling. Marking must conform to MIL-STD-129 without special codes, and palletization must adhere to DLA standards. The items are to be delivered FOB origin within 345 days, with zero tolerance for quantity variance, and subject to inspection and acceptance at the destination. Delivery is directed to Arizona Industries for the Blind in Phoenix, AZ, with a required ship date of July 29, 2027. The contract enforces strict quality and material prohibitions: mercury or mercury-containing compounds are forbidden from direct or intentional contact with the supplied hardware, except for functional uses in batteries, fluorescent lamps, instruments, sensors, controls, weapon systems, or specific chemical reagents authorized by NAVSEA; portable devices containing mercury must be shock-proof with a secondary containment barrier per NAVSEA 5100-003D. Sampling and inspection follow MIL-STD-1916 or ASQ H1331, with zero non-conformances required unless otherwise specified in the contract. Critical, major, and minor attributes are assigned verification levels VII, IV, and II, or AQLs of 0.1, 1.0, and 4.0 respectively. The technical and quality requirements referenced via R or I numbers are drawn from the DLA Master List, with the applicable revision determined by the solicitation or award date depending on acquisition size. The unit of issue is each (EA), and all compliance is monitored under DoD procurement protocols.
LAND SUPPLIER OPNS ENGINES

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332999
New
DIBBS
CONTRACTOR FIRST ARTIC
Solicitation # SPE7M4-26-T-327F
The contract specifies a nonmetallic hose assembly with a 3-inch internal diameter and 15-foot length, designed for fuel and water service under MIL-H-6615 standards. Both ends feature 3-inch external NPT threads, with a critical modification requiring steel wire cadmium-plated fittings per QQ-P-416, Type II, Class 2 instead of zinc-plated alternatives due to zinc chipping risks that can cause separation in fuel applications. The assembly must comply with revised specifications MIL-DTL-6615J dated November 28, 2022, and the associated TDP Rev A Gen 1 with part number M6615-II-E1500N. Shelf life is strictly controlled with a 120-month non-extendable lifespan, requiring clear markings of the cured date and expiration date on all packaging levels per MIL-STD-129 and RP001 packaging requirements. The item is identified by NSN 4720002896281, with a delivery requirement of 140 days FOB destination and zero tolerance for quantity variance. Inspection and acceptance occur at origin, with packaging mandated to MIL-STD-2073-1E, using preservative methods and marking consistent with MIL-STD-129 including special code 32 for Type I shelf-life items. A separate first-article test line item is included with a quantity of two units, referenced under NSN 0001S00000053, with delivery required within 90 days and no separate charge assumed unless cited. The contract is issued under full and open competition, governed by DLA procurement rules and technical requirements from the DLA Master List, with delivery directed to APO AP 96543-4043 and shipping coordinated through Andersen AFB, Yigo. The original required delivery date is February 19, 2025, and solicitation details indicate a response deadline in August 2026.
FLUID HANDLING DIVISION

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332999
New
DIBBS
EXHAUST SYSTEM, ENGINE
Solicitation # SPE7L5-26-T-4919
The contract is for the procurement of two exhaust systems for engine applications, identified by NSN 2990-01-268-3061, with a delivery requirement of 165 days after order. The solicitation number is SPE7L5-26-T-4919, issued on August 9, 2026, with responses due by August 20, 2026, under a federal procurement action managed by the Department of Defense’s Land Supplier Operations Engines. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions controlled based on the solicitation or award date depending on the acquisition size. Export control regulations under ITAR or EAR apply to the technical data associated with this item, restricting disclosure to foreign persons regardless of location and requiring compliance with DFARS 252.225-7048. Only contractors with approved US/Canada Joint Certification Program status, completed DLA export control training, and formal authorization may access controlled technical data. Packaging must adhere to DLA standards, and non-accepted supplies must have government identification removed. The place of performance is New Cumberland, Pennsylvania, with a designated point of contact at Randy Ith. Cybersecurity certification at CMMC Level 2 by a certified third-party assessment organization is also required for participation.
LAND SUPPLIER OPNS ENGINES

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332999
New
DIBBS
HOSE ASSEMBLY, NONMETAL
Solicitation # SPE7M2-26-T-6188
This contract is for the procurement of a nonmetallic hose assembly identified by NSN 4720-00-234-2526 and part number AS153-16-0440, manufactured in compliance with SAE AS1339K and SAE AS153 Revision K standards. The item is classified as a Critical Application Item and is subject to the Qualified Products List or Qualified Manufacturers List maintained by the Performance Review Institute, requiring verification of supplier qualification prior to award. All deliveries must strictly adhere to DLA packaging requirements per MIL-STD-2073-1E and marking standards per MIL-STD-129, with no special marking required. Mercury and mercury-containing compounds are strictly prohibited in the product, preservation, packaging, or labeling, except for specific approved uses such as batteries, fluorescent lamps, sensors, or chemical reagents, with portable devices containing mercury needing shockproof design and secondary containment as per NAVSEA 5100-003D. Class I ozone-depleting chemicals are entirely banned, and any substitutions must be approved unless explicitly authorized by the specification. The contract mandates delivery of 27 units FOB origin within 114 days, with zero variance allowed in quantity. Inspection and acceptance occur at the destination, and the shipment must be sent to DLA Distribution San Diego at the specified address. The solicitations and awards are governed by the DLA Master List of Technical and Quality Requirements, with revisions effective as of the solicitations or amendment dates. The contract is issued under solicitation SPE7M2-26-T-6188 with a response deadline in August 2026 and an original required delivery date of May 1, 2027.
NUCLEAR REACTOR PROGRAM

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details

More opportunities from Department Of Defense → FLUID HANDLING DIVISION

Same awarding agency

NAICS: 336412
New
DIBBS
SEAL, ENGINE STARTER
Solicitation # SPE7M4-26-T-326Z
This contract pertains to the procurement of 58 units of a SEAL, ENGINE STARTER with NSN 2995-00-939-8495, supplied by EATON AEROSPACE, LLC under part number 608593. The item is designated as a critical application and must comply with stringent technical and quality requirements outlined in the DLA Master List of Technical and Quality Requirements, which take precedence over all other standards including ASTM D3951. Quality conformance is governed by TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS and QUALITY CONFORMANCE INSPECTION REQUIREMENTS, with inspection sampling mandates following MIL-STD-1916 or ASQ H1331 using zero-defect acceptance criteria unless otherwise specified. The contract enforces CMMC Level 2 cybersecurity requirements and mandates strict adherence to MIL-STD-129 for labeling and packaging, with palletization compliant with DLA packaging standards. Delivery is FOB origin with a 47-day lead time, and inspection and acceptance occur at the destination. The unit of issue is each (EA), priced at $58.00 per unit, with no variance allowed in quantity. All packaging must be marked and stored per specified protocols, and the items must be delivered to DLA Distribution Cherry Point in North Carolina by the required delivery date of February 19, 2027.
Aircraft Engine and Engine Parts Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332618
New
DIBBS
O-RING
Solicitation # SPE7M4-26-T-327X
This contract pertains to the procurement of an O-RING with NSN 5331-00-194-1670, quantity of 1,283 units, under solicitation SPE7M4-26-T-327X, with a required delivery date of February 13, 2027, and a delivery window of 118 days. The item is classified as a critical application product with a non-extendable shelf life of 180 months and is subject to Qualified Products List (QPL) requirements, meaning the manufacturer must be pre-approved by the Performance Review Institute at the time of award. Technical and quality specifications are governed by referenced standards including SAE AS3209C and AMS7276J, and all sampling must comply with MIL-STD-1916 or ASQ H1331 Table 1, with zero non-conformances required unless otherwise stated. Mercury and mercury-containing compounds are strictly prohibited in the product, packaging, preservation, and marking, except for specific exceptions like batteries or sensors explicitly authorized by NAVSEA, and portable devices containing mercury must have shock-proof design with secondary containment. Asbestos is completely banned per FED-STD-313. Packaging must adhere to MIL-STD-2073-1E and MIL-STD-129 for marking, with special labeling requiring the code 32 to indicate Type I shelf-life status. The product must be sealed in a medium-duty, waterproof, greaseproof, opaque bag per MIL-DTL-117, Type II, Class C, Style 1, applicable to direct vendor delivery, foreign military sales, and stock shipments. All packaging and shipping must follow DLA Packaging Requirements and IP025 for hazardous materials, with no mercury permitted in any packaging materials. The item is to be delivered FOB origin to the designated receiving facility in Texarkana, TX, with a 0% variance allowed on quantity. Transportation and freight procedures are governed by DLAD PROC NOTES C19 and C20. The contract is governed by DLA’s master list of technical and quality requirements, with compliance controls tied to the solicitation issue date. The sole point of contact is Freddie Vazquez, with the purchase request number 7017437682 and unit price of $1,283.00 for the total contract value.
Other Fabricated Wire Product Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332994
New
DIBBS
TORQUE TOOL, SEA
Solicitation # SPE7M4-26-T-326C
The contract pertains to the procurement of two torque tools, identified by NSN 4921-01-605-4834, under solicitation SPE7M4-26-T-326C, issued by the Fluid Handling Division of the Department of Defense. Delivery is required within 20 days after award, with performance to occur in Keyport, Washington, 98345-7610. The solicitation was posted on August 9, 2026, with responses due by August 20, 2026. The contractor must be a Cybersecurity Maturity Model Certification (CMMC) Level 2 Certified Third-Party Assessment Organization (C3PAO) to meet the cybersecurity requirements. Technical data associated with this item is subject to export controls under either ITAR or EAR, prohibiting unauthorized disclosure to foreign persons regardless of location. Access to this controlled data is restricted to contractors holding a valid US/Canada Joint Certification Program certification, who have completed mandatory DOD export control training and questionnaire, and have received explicit approval from the Defense Logistics Agency. The North American Industry Classification System code is 332994, and the primary point of contact is Rory O’Reilly at DLA.
Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332996
New
DIBBS
PLUG, TUBE REPAIR
Solicitation # SPE7M4-26-T-327H
The contract specifies the procurement of 2,182 units of a laminated phenolic tube repair plug with a nominal size of 3/8 inch, all of which must comply with the salient characteristics and sections 3.4 through 3.7 of specification A-A-59949. Each unit must meet rigorous quality standards, and the supplier is required to provide a Certificate of Quality Compliance for every manufacturing lot, with each certificate prepared in accordance with the Supplemental Quality Assurance Provision. For deliveries subject to government inspection at source, the certificate must be available for review by the government representative upon material presentation, and compliance with COQC requirements enables the government to sign off on the WAWF receiving report provided the documentation is properly uploaded as an attachment to the Production CLIN in iRAPT. An electronic copy of each COQC must be submitted via the Attachment tab of the Receiving Report in the iRAPT system for government record retention. The item is identified by NSN 4730-00-289-0593 under solicitation SPE7M4-26-T-327H, issued by the Fluid Handling Division of the Department of Defense, with a delivery deadline of 165 days after award. The purchase request number is 7017775437, and the place of performance is New Cumberland, Pennsylvania, with a zip code of 17070-5002. All data required by the contract, including packaging and certification documentation, is to be included in the quoted price. The primary point of contact is Blake Tushar, reachable via email and phone, and the solicitation was posted on August 9, 2026, with responses due by August 20, 2026. The NAICS code for this procurement is 332996, indicating it falls under other miscellaneous fabricated metal product manufacturing.
Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332996
New
DIBBS
LOCKNUT, TUBE FITTING
Solicitation # SPE7M4-26-T-327W
This contract specifies the procurement of a locknut for tube fittings made from corrosion-resistant steel (CRES) with passivation, sized for 0.312-inch nominal tubing, in compliance with SAE Aerospace standards AS4841 and AS5179D. The item is classified as a critical application component and must be sourced exclusively from manufacturers or assemblers listed on the Performance Review Institute’s Qualified Manufacturer List (QML) or Qualified Products List (QPL). All production and assembly must adhere to strict accreditation requirements, and material must not contain mercury or mercury compounds except under specific, limited exemptions for functional devices like sensors, batteries, or instruments. Ozone-depleting chemicals are strictly prohibited. Packaging and marking must conform to MIL-STD-2073-1E and MIL-STD-129, with palletization following DLA’s packaging requirements. The NSN 4730007345774 is procured in two separate line items totaling 1,140 units, with delivery required within 18 days FOB origin. Inspection and acceptance occur at the destination, with zero tolerance for quantity variance. Delivery is split between two DLA depots—Tinker AFB and Robins AFB—with specific shipping addresses and required ship dates of September 8, 2026, and May 13, 2027, respectively. The solicitation number is SPE7M4-26-T-327W, and compliance with all referenced technical and quality requirements from the DLA Master List is mandatory.
Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 326122
New
DIBBS
COUPLING, TUBE
Solicitation # SPE7M3-26-T-8151
The contract is for the procurement of a coupling tube, part number DPL4514T10, manufactured by Designed Metal Connections Inc, identified by NSN 4730016464133, with a total quantity of six units. The item is designated as a critical application component and must comply with all technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, which supersede other standards such as ASTM D3951. Packaging must follow MIL-STD-129 and DLA Packaging Requirements for Procurement, with palletization adhering to RP001, and all items must be marked and labeled accordingly. The product is subject to Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment and incorporates requirements for Covered Defense Information. Delivery must be made FOB origin within 44 days of contract award, with inspection and acceptance occurring at the destination. The sole delivery address is DLA Distribution Cherry Point in North Carolina, and the unit of issue is each (EA), with a total contract value of $36.00. The solicitation, issued under contract number SPE7M3-26-T-8151, was posted on August 9, 2026, with a response deadline of August 20, 2026, and the original required delivery date is January 30, 2027. Point of contact is William Cain, with available support details provided.
Plastics Pipe and Pipe Fitting Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332996
New
DIBBS
ELBOW, PIPE
Solicitation # SPE7M3-26-T-8116
The contract is for 63 units of a 70-30 copper-nickel elbow pipe with a 45-degree flow angle and 2-inch nominal pipe size featuring socket-weld ends, identified by NSN 4730-01-436-0893. The item is procured under solicitation SPE7M3-26-T-8116 with a firm delivery deadline of 144 days after order, and the procurement is managed by the Department of Defense’s Fluid Handling Division. The supplier must comply with DLA packaging requirements, ensuring all documentation and materials meet specified standards. Each shipment must be accompanied by a Certificate of Quality Compliance (COQC), with one copy provided per manufacturing lot if multiple lots are involved, and each certificate must adhere to the Supplemental Quality Assurance Provision. The supplier is required to make the COQC available to Government inspectors at the source for review during material acceptance and must upload electronic copies of all certificates to the iRAPT system via the Receiving Report’s Attachment tab for official records. Government representatives may finalize acceptance via WAWF only after verifying proper COQC compliance and proper documentation upload. The contract was posted with a response deadline of August 20, 2026, and the place of performance is designated as New Cumberland, Pennsylvania, with Judy Mojica listed as the primary point of contact for inquiries and coordination.
Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332919
New
DIBBS
SEAL, CONICAL, FLARED
Solicitation # SPE7M3-26-T-8148
The contract pertains to the procurement of 50 units of a conical flared seal, identified by NSN 4730-01-610-3433 and part number AS4824N02, manufactured in compliance with SAE AS4824B Revision B dated November 1, 2007. Delivery is required within 20 days FOB origin, with no quantity variance permitted, and inspection and acceptance occur at the point of origin. Packaging must adhere to MIL-STD-2073-1E and MIL-STD-129 standards, with specific packaging codes and methods defined, including intermediate container details and palletization per DLA requirements. The item is subject to strict prohibition of Class I ozone-depleting chemicals, and any substitute chemicals require prior approval unless explicitly authorized by the specification. Quality assurance follows MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated, and verification levels for attributes are designated as VII, IV, and II for critical, major, and minor characteristics respectively. The contractor must comply with CMMC Level 2 self-assessment requirements and manage configuration changes through formal engineering change proposals. A certificate of conformance is authorized unless overridden by a quality assurance letter. The delivery address and marking instructions are specified for Hoogerheide, Netherlands, with freight handled by DNEM00. The contract is issued under full and open competition, and all technical and quality requirements referenced are governed by the DLA Master List, with revisions controlled by the solicitation or award date depending on acquisition size.
Other Metal Valve and Pipe Fitting Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333618
New
DIBBS
PARTS KIT, ENGINE FU
Solicitation # SPE7M4-26-T-327L
This contract is for the procurement of a Parts Kit, Engine Fuel, identified by NSN 2910-00-355-7669 and part number 5199734, with a quantity of 190 units. The item is classified as a critical application item and must be supplied by either Rolls-Royce Solutions America Inc or Federal-Mogul Corporation DBA, as specified. The contract mandates strict compliance with DLA packaging and preservation standards per MIL-STD-2073-1E, Appendix D, for kits, and requires marking consistent with MIL-STD-129 without special marking codes. Packaging must adhere to DLA’s procurement requirements including palletization guidelines, and all items must be delivered FOB origin with zero variance allowed in quantity. The delivery schedule allows 191 days from the contract award, with a required ship date of February 28, 2027, and an original delivery deadline of April 6, 2027. The destination for delivery is the DLA Distribution facility in New Cumberland, Pennsylvania, and transportation protocols follow DLA procedural notes C19 and C20. The contract incorporates technical and quality requirements from the DLA Master List of Technical and Quality Requirements, and requires compliance with Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment. Suppliers must address potential casting or forging needs by submitting a request to DLA if special tooling is required. The procurement is conducted under a total small business set-aside, with the solicitation number SPE7M4-26-T-327L, and the unit of issue is each (EA). The unit price is $190.00, resulting in a total contract value of $36,100. Inspections and acceptance occur at the destination, and the contracting office is the Department of Defense’s Fluid Handling Division, with Blake Tushar as the primary point of contact. All documentation and compliance obligations must align with the latest applicable versions of referenced standards in effect as of the solicitation or award date.
Other Engine Equipment Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332510
New
DIBBS
CONN ROD RH HND SD
Solicitation # SPE7M4-26-T-327T
The contract pertains to the procurement of a right-hand connecting rod for a handle-side application, identified by part number 803-6397269 and NSN 2040014549209, with a quantity of 16 units to be delivered FOB origin within 165 days. All items must comply with stringent technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, with sampling governed by MIL-STD-1916 or ASQ H1331, Table 1, enforcing zero non-conformances for acceptance unless otherwise stated. Attributes are classified with verification levels or AQLs, and unspecified features are treated as major. The product must be free of ozone-depleting chemicals and must not contain or come into direct contact with mercury or mercury compounds except for specific exempted applications like batteries, instruments, or sensors as defined by NAVSEA; portable mercury-containing devices must include a secondary containment and be shock-proof per NAVSEA 5100-003D. Packaging must adhere to MIL-STD-2073-1E and MIL-STD-129, with unit packaging including preservative methods, no cushioning material, and defined container codes, while palletization follows DLA packaging guidelines. Marking is to be standard with no special codes applied, and delivery is directed to the DLA Distribution San Joaquin facility in Tracy, California. The contract requires full and open competition with no set-aside, and pricing is fixed at $16.00 per unit for a total value of $256. The solicitation, issued under contract number SPE7M4-26-T-327T, was posted on August 9, 2026, with responses due by August 20, 2026, and the original required delivery date is February 10, 2027, with a need ship date of February 2, 2027.
Hardware Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333998
New
DIBBS
RESTRICTOR UNIT, FLU
Solicitation # SPE7M3-26-T-8147
The contract is for a single Restrictor Unit, Fluid Flow, with NSN/Part Number 4730-01-535-6415, under solicitation SPE7M3-26-T-8147, issued as a Total Small Business Set-Aside under NAICS code 333998. The item is subject to strict export control regulations under ITAR or EAR, prohibiting any disclosure or transfer of technical data to foreign persons without prior authorization from the Department of State or Commerce, including foreign nationals employed by U.S. companies or subsidiaries. Compliance with DFARS 252.225-7048 is required, and only DLA contractors with approved U.S./Canada Joint Certification Program status, completed training on handling DOD export-controlled data, and authorized access may receive the technical information. The contract mandates adherence to DLA packaging standards, removal of government identification from non-accepted supplies, and incorporates technical and quality requirements from the DLA Master List, with the applicable revision determined by the solicitation or award date. The supplier must be Cybersecurity Maturity Model Certification (CMMC) Level 2 certified as a third-party assessment organization and must deliver the item within 165 days of award to New Cumberland, Pennsylvania, with William Cain designated as the primary point of contact.
All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details