Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →

This Solicitation opportunity from Department Of Defense was posted on July 20, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

HOSE ASSEMBLY, NONME

Closed
SPE7M2-26-T-5483Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 332999
New
DIBBS
SPACER, RING
Solicitation # SPE4A7-26-T-560G
The contract pertains to the procurement of four SPACER, RING items with NSN 5365-12-391-8718 and part number 6459264 from RENK SYSTEMS CORP, under solicitation SPE4A7-26-T-560G. The delivery is set for 141 days after award, with FOB origin terms and no tolerance for quantity variance. All items must be inspected and accepted at the destination, and they must be packaged in compliance with ASTM D3951, with packaging and labeling conforming strictly to MIL-STD-129 and DLA’s RP001 packaging requirements, which supersede any conflicting standards. Sampling and quality verification are governed by MIL-STD-1916 or ASQ H1331, Table 1, with zero non-conformances required unless otherwise stated; critical, major, and minor attributes must be verified at levels VII, IV, and II respectively or with corresponding AQLs of 0.1, 1.0, and 4.0, while unspecified attributes are treated as major. The items must be palletized per DLA requirements and marked per RQ017 for physical identification. All technical and quality requirements referenced by R or I numbers are drawn from the DLA Master List of Technical and Quality Requirements, and the contract mandates removal of government identification from non-accepted supplies per RQ011. The delivery address is the DLA Distribution facility in New Cumberland, Pennsylvania, with the required ship date set for December 5, 2026. The unit price is $4.00 per unit, resulting in a total contract value of $16.00.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 20 hours ago

DEADLINE

in 4 days

AI Contract Overview

Show more

This contract is for a non-metallic hose assembly with a 1.25-inch internal diameter and an overall length of 14 inches, designated under the RAST SYSTEM and identified by NSN 4720-01-187-2054. The item is classified as a critical application item and must comply with stringent technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, with revisions controlled by the solicitation or award date depending on acquisition scale. The hose assembly must meet NAVAIR aircraft launch and recovery equipment traceability standards, and all bare items must be marked with the contract number, NAWC CAGE code, and part number unless specific drawing requirements dictate otherwise. Environmental restrictions prohibit the use of Class I ozone-depleting chemicals and intentional incorporation of mercury or mercury-containing compounds, with limited exceptions for functional uses in batteries, fluorescent lights, instruments, sensors, controls, weapon systems, and certain chemical reagents specified by NAVSEA. Portable devices containing mercury must be shockproof and include a secondary containment barrier per NAVSEA 5100-003D. The contract requires delivery of six units with a 133-day lead time, to be shipped FOB origin and inspected and accepted at the destination. Packaging must adhere to MIL-STD-2073-1E and DLA packaging requirements, with marking compliant to MIL-STD-129 and no special marking codes applied. Palletization follows DLA guidelines, and the delivery address is specified as the DLA Distribution San Joaquin warehouse in Tracy, California. The unit of issue is each, with a fixed unit price of $6.00 and no quantity variance allowed. Full and open competition applies, and unique item identification is not required per the service customer’s request. Technical data references include multiple drawing revisions dated between 2001 and 2022, all under TDP Revision B General 2, with specifications tied to specific part numbers. The contract was issued under solicitation SPE7M2-26-T-5483 with a response deadline in July 2026 and a required delivery date in December 2026.

General Info

Procurement of six nonmetallic hose assemblies under federal solicitation open to commercial competition.

Agency

Department Of Defense → NUCLEAR REACTOR PROGRAMView Agency

NAICS

332999 - All Other Miscellaneous Fabricated Metal Product ManufacturingView NAICS

Place of Performance

REC WHSE 57, TRACY, CA, 95304-5000, USA

Set-Aside

NONE

Documents

(1)

RFQ SPE7M2-26-T-5483 for DLA Land and Maritime Nuclear Reactor Program

PDFrfq

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

1 update
PhaseClosed
Posted

Solicitation

Amendment 1

Contract was updated

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → NUCLEAR REACTOR PROGRAM
Contacts1 person available
OfficeUSA
Organization / Agency
Department Of Defense → NUCLEAR REACTOR PROGRAM
View Agency Profile
Office AddressUSA

Full Description

Show more
HOSE ASSEMBLY,NONME
HOSE ASSEMBLY, NON-METALLIC
1.25 IN ID, 14.00 IN OVERALL LENGTH E/I: RAST SYSTEM
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE
USED NOR INCORPORATED IN ANY ITEMS TO BE
DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION
SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT
DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS.
SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR
APPROVAL UNLESS THEY ARE AUTHORIZED BY THE
SPECIFICATION REQUIREMENTS.
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
THIS MATERIAL MUST MEET NAVAIR AIRCRAFT LAUNCH &
RECOVERY EQUIPMENT TRACEABILITY REQUIREMENTS. BARE
ITEM MARKINGS SHALL BE IAW THE TECHNICAL DATA
DRAWINGS PROVIDED.
BARE ITEM MATERIAL SHALL BE MARKED WITH CONTRACT
NUMBER, NAWC CAGE, AND PART NUMBER UNLESS OTHERWISE
SPECIFICIED ON ASSOCIATED DRAWING. IF A CONFLICT
EXISTS WITH MARKING REQUIREMENTS OF THIS 82N ALRE/SE
ITEM, THE ASSOCIATED DRAWING REQUIREMENTS SHALL APPLY.
FULL AND OPEN COMPETITION APPLY
Item Unique Identification is not required by request of the Service customer. DFARS 252.211-7003(c)(1)(i) applies.
CRITICAL APPLICATION ITEM
SPE7M2-26-T-5483
SECTION B
TDP Rev B Gen 2 IAW BASIC DRAWING NR 80020 6534D572 REVISION NR J DTD 10/31/2006 PART PIECE NUMBER: 6534D572-1
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 80020 6534C524 REVISION NR H DTD 10/30/2006 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 80020 6534C546 REVISION NR H DTD 02/08/2006 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 80020 6534C596 REVISION NR H DTD 10/31/2006 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 16236 CN-01-187-2054 REVISION NR DTD 11/19/2001 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 80020 6534D570 REVISION NR J DTD 10/31/2006 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 80020 6534C593 REVISION NR G DTD 09/23/2022 PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017048726 0001 EA 6.000
NSN/MATERIAL:4720011872054
DELIVERY (IN DAYS):0133
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:AE CLNG/DRY:1 PRESV MAT:00
WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:C
UNIT CONT:D3 OPI:O
PACK CODE:U
SPE7M2-26-T-5483
SECTION B
PR: 7017048726 PRLI: 0001 CONT’D
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
W62G2T
W1A8 DLA DIST SAN JOAQUIN
25600 S CHRISMAN ROAD
REC WHSE 57
TRACY CA 95304-5000
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W62G2T
W1A8 DLA DIST SAN JOAQUIN
25600 S CHRISMAN ROAD
REC WHSE 57
TRACY CA 95304-5000
US
Need Ship Date:12/01/2026 Original Required Delivery Date:12/04/2026
SPE7M2-26-T-5483 NSN/Part Number: 4720-01-187-2054 Quantity: 6 EA Purchase Request: 7017048726QTY: 6 Delivery: 133 days ADO

More opportunities from Department Of Defense → NUCLEAR REACTOR PROGRAM

Same awarding agency

NAICS: 334417
New
DIBBS
CLAMP, CABLE, ELECTRICAL
Solicitation # SPE7M2-26-T-6609
Solicitation SPE7M2-26-T-6609, issued by the DLA Land and Maritime Nuclear Reactor Program, is a request for quotations for 426 electrical connector cable clamps, identified by NSN 5935-01-410-7665 and part number M85049/51S20W. This is designated as a critical application item and must be furnished in accordance with TDP Rev B Gen 3, SAE AS85049/51 Revision G, and SAE AS85049F Revision F. The items are subject to Qualified Products List (QPL) requirements and must comply with NAVSEA 5100-003D regarding the prohibition of intentionally added mercury. The delivery period is 164 days, with a need ship date of February 23, 2027, and an original required delivery date of May 15, 2027. Shipping is FOB Origin to the DLA Distribution Depot Hill at Hill AFB, Utah. Inspection and acceptance will occur at the destination per FAR 52.246-2. Packaging and marking must adhere to MIL-STD-2073-1E and MIL-STD-129, with specific palletization requirements under RP001. The procurement is governed by NAICS code 334417 and includes various FAR and DFARS clauses, including the Buy American Act and the Berry Amendment. Offers produced via additive manufacturing are ineligible for award unless specifically authorized. Invoicing and payment must be processed through the Wide Area WorkFlow (WAWF) system. The solicitation incorporates the DLA Master List of Technical and Quality Requirements and requires compliance with hazardous material labeling standards under 29 CFR 1910.1200.
Electronic Connector Manufacturing

POSTED

about 20 hours ago

DEADLINE

in 4 days
View Details
NAICS: 332911
New
DIBBS
VALVE, LINEAR, DIRECTION
Solicitation # SPE7M2-26-U-0370
Solicitation SPE7M2-26-U-0370 is a total small business set-aside issued by the DLA Land and Maritime Nuclear Reactor Program for the procurement of a critical application item, specifically a linear directional control valve (NSN 4820011931870). This is a restricted source item requiring engineering source approval by the Government Design Control Activity, with approved part numbers from Oshkosh Defense LLC (2CK182) and Parker-Hannifin Corporation (85562-02P). The government is seeking an estimated quantity of 133 units under a unilateral Simplified Indefinite-Delivery Contract with a maximum contract value of 350,000 dollars. Delivery is required within 89 days, with inspection and acceptance occurring at the destination. The contract mandates strict adherence to technical and quality standards, including Item Unique Identification (IUID) per MIL-STD-130 and packaging and marking requirements according to MIL-STD-2073-1E and MIL-STD-129. Environmental restrictions prohibit the use of mercury compounds and Class I ozone-depleting chemicals. Offerors must comply with the Buy American Act, the Berry Amendment, and DFARS 252.204-7012 for safeguarding covered defense information. Payments will be processed electronically through the Wide Area WorkFlow (WAWF) system. Quotes must be submitted via the DLA Internet Bid Board System (DIBBS) by September 11, 2026.
Industrial Valve Manufacturing

POSTED

about 20 hours ago

DEADLINE

in 4 days
View Details

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 650+ contractors already using CLEATUS