Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

HOSE ASSEMBLY, NONMETAL

Active
SPE7M4-26-T-290WFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract is for a nonmetallic hose assembly with a 5/8 inch inner diameter and a length of 62-1/2 inches, identified by NSN 4720-01-186-8681 and part number 28052 from EaglePicher Corp or 9J5197 from Caterpillar Inc. Two units are required to be delivered within ten days under FOB origin terms, with no variance allowed in quantity. The product must comply with all DLA Master List of Technical and Quality Requirements referenced by R and I numbers, which supersede any other standards including ASTM D3951. Packaging must adhere to MIL-STD-129 and RP001 DLA Packaging Requirements, with units packed according to the specified Quantity per Unit Pack and palletized as directed. The use of Class I ozone-depleting chemicals is strictly prohibited, and any substitutes require prior approval unless explicitly permitted by the specification. Delivery is to be made to the military facility at Camp Casey, Dongducheon, South Korea, with shipment details governed by DLAD Procurement Notes C19 and C20. The contract is issued under solicitation SPE7M4-26-T-290W with a required delivery date of July 27, 2026, and the unit of issue is AY. All markings and labeling must reflect the government’s designated point of contact and shipment information, and the item must be shipped without government identification if not accepted.

General Info

Two 5/8-inch hose assemblies, NSN 4720-01-186-8681, deliver to Camp Korea by July 27, 2026, FOB origin, MIL-STD-129 packed.

Agency

Department Of Defense → FLUID HANDLING DIVISIONView Agency

NAICS

332999 - All Other Miscellaneous Fabricated Metal Product ManufacturingView NAICS

Place of Performance

US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → FLUID HANDLING DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → FLUID HANDLING DIVISION
View Agency Profile
Office AddressUS
Contacts
Blake Tushar
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
HOSE ASSEMBLY,NONMETALLIC
HOSE ASSEMBLY, NONMETALLIC. 5/I IN. ID,
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
62-1/2 IN. LG.
3ND ITEM: SCRAPER, TRACTOR, FSCM 11083.
CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE
USED NOR INCORPORATED IN ANY ITEMS TO BE
DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION
SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT
DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS.
SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR
APPROVAL UNLESS THEY ARE AUTHORIZED BY THE
SPECIFICATION REQUIREMENTS.
EAGLEPICHER CORP 85283 P/N 28052
CATERPILLAR INC 11083 P/N 9J5197
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017659329 0001 AY 2.000
NSN/MATERIAL:4720011868681
DELIVERY (IN DAYS):0010
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
SPE7M4-26-T-290W
SECTION B
PR: 7017659329 PRLI: 0001 CONT’D
PREP FOR DELIVERY:
PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
BULK BREAK POINT:
WT4KDV
0061 OD CO SUPPORT MAINTEN
AWCF SSF
BLDG 770 CAMP CASEY
DONGDUCHEON 11310
KR
RDD 555 SHIPMENT. TRANSPORTATION SEE DLAD PROC NOTE C19. FIRST DESTINATION TRANSPORTATION SEE DLAD PROC
NOTE C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
WT4KDV
0061 OD CO SUPPORT MAINTEN
AWCF SSF
BLDG 770 CAMP CASEY
DONGDUCHEON 11310
KR
MARKFOR
WT4KDV
0061 OD CO SUPPORT MAINTEN
AWCF SSF
BLDG 770 CAMP CASEY
DONGDUCHEON 11310
KR
M/F: (TCN) WT4KDV62030373
RDD: 555
PROJ: 9GD TP 2
SUPP ADD: W9046W SIG: C
FOR GOVERNMENT USE ONLY: (IPD) 05
DIC: A01 DIST: V ADV: FC: Z9
Need Ship Date:00/00/0000 Original Required Delivery Date:07/27/2026
SPE7M4-26-T-290W NSN/Part Number: 4720-01-186-8681 Quantity: 2 AY Purchase Request: 7017659329QTY: 2 Delivery: 10 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332999
New
DIBBS
PANEL, VEHICULAR OPE
Solicitation # SPE7LX-26-U-9072
The contract solicitation SPE7LX-26-U-9072 is issued by the Department of Defense’s Strategic Acquisition Program Directorate for the procurement of 24 vehicular panels with NSN 2510-01-687-9931 under a Total Small Business Set-Aside, with a unit of issue per each (EA) and a total price of $24.00 per unit. Delivery is required within 89 days, FOB origin, with zero variance allowed in quantity and inspection and acceptance occurring at the destination. Packaging must strictly comply with MIL-STD-2073-1E and DLA’s Packaging Requirements, including individual packaging with QUP=001, use of designated cushioning materials to prevent damage from vibration, and proper immobilization within unit containers. Cushioning must either be die-cut NA material to protect protrusions or weather-resistant fiberboard (JC) secured with tape to each other, not the part, ensuring panels are positioned flat-side down with reinforced tape securing container flaps. Marking must adhere to MIL-STD-129 on both barrier bag and box with no special codes applied. All packaging and preservation methods are prohibited from containing mercury or mercury compounds. The contract mandates compliance with all technical and quality requirements referenced in the DLA Master List, with revisions controlled based on the solicitation issue or award date, as applicable. The solicitation closed on August 13, 2026, and was posted on July 29, 2026, with primary point of contact Theodore Misiolek.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 15 hours ago

DEADLINE

in 14 days
View Details
NAICS: 332999
New
DIBBS
STEPLADDER
Solicitation # SPE8E5-26-T-3730
The contract specifies the procurement of aluminum step ladders with the NSN 5440-00-512-0311 and part number 206106ACS200, requiring a quantity of four units to be delivered within 20 days FOB origin. The ladders must comply with all applicable DLA Master List of Technical and Quality Requirements, which override any general standards such as ASTM D3951, and packaging must adhere to MIL-STD-129 for marking and labeling, with palletization following DLA packaging guidelines. Delivery is directed to a U.S. Air Force prepositioning site in Al Udeid Air Base, Qatar, with shipping instructions referencing specific DLA procedural notes and using the APO AE 09898 address for parcel posting. The unit price is set at $4.00 per unit, with no variance allowed in quantity, and inspection and acceptance occur at the destination. The contract is issued under solicitation SPE8E5-26-T-3730, with a response deadline of August 10, 2026, and a required delivery date of July 27, 2026, to be fulfilled by approved suppliers including Louisville Ladder Inc, Bauer Corp, and Green Bull Inc. All items must be shipped using TAC 2, labeled as non-mailable, and tracked under RDD 777 with the assigned project code 9GS TP 2.
Defense Logistics Agency

POSTED

about 15 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332999
New
DIBBS
HOSE, NONMETALLIC
Solicitation # SPE7M4-26-T-291A
A 2-1/2 inch nonmetallic hose, 35 feet in length, is being procured under specification MIL-DTL-22240G with a modified weight test requirement of 500 pounds instead of the standard 650 pounds. The product must comply with stringent quality and technical requirements referenced through the DLA Master List and includes controlled packaging, inspection, and acceptance protocols at origin, with shipment following MIL-STD-2073-1E and MIL-STD-129 standards. The item carries a non-extendable 120-month shelf life classified as Type I (Code W) and must be marked accordingly. Ozone-depleting chemicals and mercury or mercury-containing compounds are strictly prohibited unless specifically exempted and approved, and all substitute materials require prior authorization. The contract mandates full and open competition under a Service-Disabled Veteran-Owned Small Business Set-Aside, with adherence to ISO 9001 and higher-level quality requirements including configuration control, engineering change proposals, and zero-defect sampling per MIL-STD-1916 or equivalent. First article testing is required for one unit, and failure to price this line item will result in no separate charge being assumed. Delivery is due within 333 days FOB origin to the Defense Logistics Agency in San Diego, with no variance allowed in quantity. The procurement is governed by clauses addressing inspection, acceptance, packaging, and transportation, and all documentation and marking must align with current DLA and DoD directives.
FLUID HANDLING DIVISION

POSTED

about 15 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332999
New
DIBBS
HOSE ASSEMBLY, METAL
Solicitation # SPE7L4-26-T-5854
The contract is for a single unit of a metal hose assembly with NSN 4720-01-234-3003 and part number 114B355, supplied by STEWART & STEVENSON POWER PRODUCTS LLC. Delivery is required within five days of award, with FOB origin terms, and no variance in quantity is allowed. Inspection and acceptance occur at the origin point, and the item must comply with DLA packaging requirements per MIL-STD-2073-1E and MIL-STD-129, including specific packaging codes, containment methods, and marking standards. The product must not contain or come into direct contact with mercury or mercury-containing compounds except for specified functional uses in batteries, lighting, instruments, weapon systems, or chemical reagents approved by NAVSEA, with portable mercury-containing devices requiring shockproof design and a secondary containment boundary per NAVSEA 5100-003D. The delivery destination is the General Depot of Naval Supplies in Kaohsiung, Taiwan, and shipment must follow DLA transportation guidelines, with the freight forwarder and shipping details governed by DLAD PROC NOTES C19 and C20. The contract is issued under solicitation SPE7L4-26-T-5854, with an original required delivery date of July 31, 2026, and the supplier must adhere to all technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements.
LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 15 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332999
New
DIBBS
COMPRESSOR UNIT, REC
Solicitation # SPE7M1-26-T-237J
The contract is for the procurement of three reciprocating compressor units, identified by NSN 4310-01-211-4963 and part number CU4963 from NETEX INDUSTRIES, with a total quantity of three units to be delivered within 20 days under FOB destination terms. All deliveries must comply with DLA packaging requirements as outlined in RP001 and MIL-STD-2073-1E, including specific packaging methods, materials, and levels, with units packed in single unit containers and marked in accordance with MIL-STD-129 and MIL-STD-130 for government identification. The item is designated as a critical application item, and no variance in quantity is permitted—zero percent plus or minus. Inspection and acceptance occur at the destination, and the contract references the DLA Master List of Technical and Quality Requirements for all technical and quality standards identified by R or I numbers. The delivery destination is APO AP 96278-2069, while the freight shipping address is OSAN AB, South Korea. The solicitation number is SPE7M1-26-T-237J, with a response deadline of August 10, 2026, and an original required delivery date of July 27, 2026. The point of contact is Michael Reese at DLA, and all items must be procured using the DoD authorized unit of issue and comply with applicable transportation and logistics directives including DLAD procedural notes C19 and C20.
MARITIME SUPPLY CHAIN

POSTED

about 15 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332999
New
DIBBS
SPACER, REACTION, IGNITI
Solicitation # SPE4A7-26-T-600N
The contract pertains to the procurement of four units of SPACER, REACTION, IGNITION with NSN 5365-01-230-3095, under solicitation SPE4A7-26-T-600N, with a response deadline of August 6, 2026, and a required delivery within five days after order placement. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the acquisition size. The item is subject to export control under ITAR or EAR, restricting disclosure of associated technical data to foreign persons regardless of location, and mandates compliance with DFARS 252.225-7048. Access to such controlled data is limited to contractors with approved US/Canada Joint Certification Program status, who have completed mandatory DOD export control training and DLA questionnaire, and have received formal authorization from DLA. Packaging must adhere to DLA standards, inspection and acceptance occur at the manufacturer’s origin, and non-accepted items must have government identification removed. Covered defense information applies, and tailored higher-level quality requirements are enforced for both manufacturers and non-manufacturers. The solicitation is issued by the Department of Defense through the ASC Supplier Oper AE and AF Division, with Christian Roberson as the primary point of contact.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 15 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332999
New
DIBBS
SPACER, SPECIAL SHAPED
Solicitation # SPE4A7-26-T-599N
The contract is for 56 special-shaped spacers identified by NSN 5365-01-588-4009 under solicitation SPE4A7-26-T-599N, with a delivery requirement of 171 days after order. The item is classified as a commercial item, allowing the use of a Certificate of Conformance unless restricted by a Quality Assurance Letter of Instruction. Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1, or an equivalent zero-based plan; critical, major, and minor attributes are to be verified at levels VII, IV, and II or with AQLs of 0.1, 1.0, and 4.0 respectively, with unspecified attributes treated as major. Zero non-conformances are required in the sample lot unless otherwise stated. The contractor must comply with DLA packaging requirements and technical quality specifications referenced in the DLA Master List, with revisions controlled based on acquisition type and solicitation amendments. Inspection and acceptance occur at the manufacturer’s origin, and government identification must be removed from non-accepted items. The item is subject to export control under ITAR or EAR, restricting technical data sharing with foreign persons regardless of location, and DFARS 252.225-7048 applies. Access to this controlled data requires JCP certification, completion of DOD export training, and DLA approval. The contractor must also maintain CMMC Level 2 certification through a certified third-party assessment organization. Physical identification of the product must meet specified marking requirements, and covered defense information protocols are enforced. The contract is managed by the Department of Defense through the ASC Supplier Operations AE and AF Division, with performance located in New Cumberland, PA, and primary point of contact is Tamera Greene.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 15 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332999
New
Federal
Fixed Canopy Manufacturing and AssemblyThe contract entails the fabrication, assembly, and rigorous quality assurance of 85 fixed canopies identified by NSN 1560-01-708-2761, requiring full compliance with both military specifications and ISO standards to ensure operational readiness and durability under demanding conditions. The work must be performed at the designated place of performance in Chambersburg, Pennsylvania, with all deliverables subject to stringent inspection and certification protocols to meet defense-grade requirements. This is a subcontract opportunity exclusively reserved for SBA-certified Women-Owned Small Businesses under the WOSB Sole Source Program, ensuring eligibility is restricted to businesses that meet the criteria outlined in FAR 19.15. The North American Industry Classification System code 332999 applies, covering other fabricated metal product manufacturing and reflects the specialized nature of the fabrication process. The solicitation was posted on July 29, 2026, and responses are due by August 28, 2026, at 9:00 p.m. Eastern Time, with no formal solicitation number issued. The contracting activity is managed under the Department of Defense through the DLA Aviation office in Huntsville, indicating direct support to military logistics and aviation systems. Although no point of contact is listed, interested parties must submit proposals through the SAM.gov platform using the provided link, and all technical, quality, and delivery requirements must be fully addressed to be considered responsive. The contract requires full adherence to federal acquisition regulations and quality control processes, with performance expectations aligned to the Department of Defense’s standards for sustainment and operational use.
Al DLA Aviation At Huntsville

POSTED

about 20 hours ago

DEADLINE

in 30 days
View Details
NAICS: 332999
New
Federal
Fluid Pressure Filter SupplyThe contract is for the supply of a fluid pressure filter identified by NSN 4730-01-546-8847, required to meet established military filtration standards. It is structured as a subcontract under a Small Business Set Aside designation, fully reserved for small businesses, with the NAICS code 332999 indicating it falls under other miscellaneous manufacturing. The solicitation was posted on July 29, 2026, and responses must be submitted by August 4, 2026, at 7:00 PM. The contracting activity is managed by the Naval Supply Systems Command Fleet Logistics Center Puget Sound, under the Department of Defense, and performance is expected to occur under unspecified geographic parameters. There is no publicly listed point of contact or detailed address for the place of performance, and the opportunity is accessible via a SAM.gov portal link for further submission details.
Navsup Flt Logistics Ctr Puget Sound

POSTED

about 20 hours ago

DEADLINE

in 5 days
View Details
NAICS: 332999
New
Federal
Precision Machining of Aerospace Fuel Control HousingThe contract entails the precision manufacturing of a fuel control housing designated as NSN 2910-01-327-4181 and part number 360150-17, specifically for use in the BLACKHAWK system. The scope encompasses the full production cycle including sourcing of raw materials, computer numerical control machining, heat treatment, surface finishing, rigorous inspection protocols, and final delivery to meet stringent aerospace standards. All work must adhere to exacting technical specifications to ensure operational reliability in high-performance aviation environments. The effort is classified as a subcontract under NAICS code 332999 and is being managed by the Department of Defense through the DLA Aviation office in Huntsville. The solicitation was posted on July 29, 2026, with a firm deadline for responses on August 2, 2026, at 10:00 PM Eastern Time. Failure to meet deadlines or specifications will result in disqualification.
Al DLA Aviation At Huntsville

POSTED

about 20 hours ago

DEADLINE

in 4 days
View Details
NAICS: 332999
New
Federal
UID Marking & Asset Tagging ServicesThe contract requires the application of permanent, scannable unique identification markings to engines in strict compliance with DFARS 252.211-7003 and MIL-STD-130 standards. This includes the precise application of data matrix codes that meet all regulatory specifications for durability, legibility, and machine readability, along with full support for registry submission to ensure each engine is properly documented in the DoD Unique Identity system. The work must be performed to ensure traceability and accountability throughout the asset lifecycle, with all markings resistant to environmental degradation and capable of being reliably scanned under operational conditions. This subcontract is issued by the Naval Supply Systems Command Fleet Logistics Center Puget Sound under the Department of Defense and falls under NAICS code 332999 for other miscellaneous fabricated metal product manufacturing. The solicitation was posted on July 29, 2026, with a response deadline of August 4, 2026, at 6:01 PM. There is no specified set-aside classification, and the performance location is not detailed beyond the overseeing agency’s jurisdiction. All eligible subcontractors must demonstrate technical capability to meet the stringent UID requirements and provide documented proof of compliance with federal marking and registry protocols.
Navsup Flt Logistics Ctr Puget Sound

POSTED

about 20 hours ago

DEADLINE

in 5 days
View Details
NAICS: 332999
New
Federal
Hydraulic System Component SupplyThe contract calls for the supply of hydraulic cylinders, hoses, valves, and connectors specifically engineered to integrate seamlessly with the motor grader’s existing hydraulic system and a newly installed front blade assembly, ensuring compatibility and optimal performance. All components must meet rigorous mechanical and operational standards to maintain system integrity under demanding field conditions, with delivery and installation required to support the motor grader’s operational readiness at the designated worksite. This is a Small Business Set Aside subcontract under NAICS code 332999, with a response deadline of August 7, 2026, and a posted date of July 29, 2026. The place of performance is in Silver City, New Mexico, with the awarding agency being the Gila National Forest under the U.S. Department of Agriculture. Participation is restricted to eligible small businesses, and the procurement is focused on securing specialized hydraulic components that enhance equipment functionality without requiring modifications to the core hydraulic architecture.
Gila National Forest

POSTED

about 20 hours ago

DEADLINE

in 9 days
View Details

More opportunities from Department Of Defense → FLUID HANDLING DIVISION

Same awarding agency

NAICS: 336413
New
DIBBS
BEARING, CONTACT
Solicitation # SPE7M4-26-T-291E
This contract specifies the procurement of a CONTACT BEARING with NSN 1650-00-966-9573 and part number 00-276777 from EATON AEROSPACE, LLC, for a quantity of 38 units to be delivered FOB origin within 147 days, with a required ship date of January 5, 2027 and original delivery deadline of March 13, 2027. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced via R and I numbers, which take precedence over any other standards including ASTM D3951. Packing and labeling must comply with MIL-STD-129 and DLA Packaging Requirements for Procurement, with palletization strictly adhering to RP001. Sampling and inspection are governed by MIL-STD-1916 or ASQ H1331 Table 1, requiring zero non-conformances unless otherwise stated, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Inspection and acceptance occur at destination. The item is designated as a Critical Application Item and the contractor must perform a CMMC Level 2 Self-Assessment to meet cybersecurity requirements. Delivery is to DLA Distribution Cherry Point in North Carolina, with unit of issue as EA and no quantity variance permitted. The contract is issued under solicitation SPE7M4-26-T-291E with a response deadline of August 10, 2026.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 11 days
View Details
NAICS: 326220
New
DIBBS
HOSE, NONMETALLIC
Solicitation # SPE7M4-26-T-291C
The contract is for the procurement of nonmetallic hose, identified by NSN 4720-01-581-3719 and part number DAAK002146, with a quantity of eight units required under solicitation SPE7M4-26-T-291C. This is a total small business set-aside under FAR 19.5, with a NAICS code of 326220, and requires delivery within 161 days from the award date, with the original required delivery date set for February 14, 2027. The item must be delivered FOB origin, with no variance allowed in quantity, and inspection and acceptance occur at the destination. Packaging must comply with MIL-STD-2073-1E, including specific preservation methods, wrapping, and unit container codes, with marking adhering to MIL-STD-129 and no special marking required. Palletization follows DLA packaging requirements, and the delivery address is DLA Distribution Warner Robins at Robins Air Force Base, Georgia. The contract incorporates all technical and quality requirements from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue or award date depending on acquisition size. The point of contact for inquiries is Blake Tushar, with responses due no later than August 10, 2026.
Rubber and Plastics Hoses and Belting Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334419
New
DIBBS
SHOP EQUIPMENT, TIRE
Solicitation # SPE7M4-26-T-290S
This contract pertains to the procurement of one unit of shop equipment, specifically a tire, identified by NSN 4940-01-668-8502 and purchase request 7017659115, with a required delivery within 20 days of contract award. The item must be delivered FOB origin and inspected and accepted at the destination, with no variance allowed in quantity. Packaging and labeling must comply with ASTM D3951 and MIL-STD-129, and palletization must adhere to DLA’s packaging requirements, with all documentation and markings following DLA Master List Technical and Quality Requirements, which take precedence. The use of Class I ozone-depleting chemicals is strictly prohibited, and any substitute chemicals require prior approval unless explicitly authorized by specification. The contract mandates shipment via traceable freight methods only—parcel post is prohibited—and designates the delivery destination as a military facility at Camp Lejeune, North Carolina, with specific address and contact information provided. The supply is governed by technical standards referenced through R and I numbers incorporated from DLA’s official master list, and all compliance obligations, including government identification removal from non-accepted items, are binding. The solicitation number is SPE7M4-26-T-290S, with a response deadline of August 10, 2026, and the original required delivery date is July 27, 2026.
Other Electronic Component Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 11 days
View Details
NAICS: 114119
New
DIBBS
CYLINDER ASSEMBLY, R
Solicitation # SPE7M4-26-T-290T
The contract is for a single commercial off-the-shelf cylinder assembly, part number 15S002386JJ0623, with NSN 2040-01-714-3700, procured by the Department of Defense’s Fluid Handling Division under solicitation SPE7M4-26-T-290T. Delivery is required within 20 days FOB origin with zero variance in quantity and inspection and acceptance occurring at the destination. The item is classified as a critical application item and must comply with all DLA Master List of Technical and Quality Requirements, which supersede other specifications including ASTM D3951. Packaging must adhere to MIL-STD-129 and DLA Packaging Requirements, with palletization following RP001 guidelines. Ozone-depleting chemicals are strictly prohibited, and any substitute chemicals require prior approval. The unit of issue is each, with a total price of $1.00, and shipment must be sent via the fastest traceable freight method—parcel post is explicitly forbidden. The delivery address is in Virginia Beach, and the required delivery date is July 27, 2026. Only authorized substitutes approved by the specification requirements may be used, and all markings and labeling must conform to federal standards.
Other Marine Fishing

POSTED

about 15 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332996
New
DIBBS
NUT, TUBE COUPLING
Solicitation # SPE7M3-26-T-7740
The contract is for the procurement of two steel tube coupling nuts, cadmium plated, with a nominal tube outer diameter of 1/4 inch, manufactured to meet MIL-DTL-18866K and referenced under part number MS39210-3. The items are classified as a critical application product and must comply with stringent military standards including MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and DLA packaging requirements. Sampling and inspection follow zero-defect acceptance criteria per MIL-STD-1916 or comparable zero-based plans, with unspecified attributes treated as major and verified at AQL 1.0. The items are prohibited from containing mercury or ozone-depleting chemicals unless explicitly exempted, and any substitute materials require prior approval. Delivery is FOB origin within 20 days to a military facility in Taiwan, with no variance allowed in quantity. The contract enforces full and open competition and references the DLA Master List of Technical and Quality Requirements for all technical and quality stipulations. The NSN is 4730-00-052-9876, the purchase request number is 7017671486, and the delivery deadline is August 3, 2026.
Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 11 days
View Details
NAICS: 326220
New
DIBBS
HOSE ASSEMBLY, NONMETAL
Solicitation # SPE7M4-26-T-291J
This contract specifies the procurement of a nonmetallic hose assembly with part number 89819-TTNAV and NSN 4720-01-734-5813, requiring three units to be delivered within 147 days from the contract award. The item is designated as a critical application item and includes mandatory compliance with DLA technical and quality requirements referenced through R and I numbers from the DLA Master List. Supply chain traceability documentation must be retained by the contractor per DLA Directive Procurement Note C03, and the material is subject to specialty metal requirements under DFARS clauses 252.225-7008, 252.225-7009, and 252.225-7010 if the contract exceeds the Simplified Acquisition Threshold. Packaging and marking must conform to MIL-STD-2073-1E and MIL-STD-129, respectively, with no special marking codes applied. Palletization follows DLA packaging guidelines, and delivery is FOB origin to the specified DLA distribution facility in New Cumberland, Pennsylvania. Inspection and acceptance are required at the destination point, with zero tolerance for quantity variance. The contract solicitation number is SPE7M4-26-T-291J, issued by the Department of Defense’s Fluid Handling Division, with a response deadline of August 10, 2026, and an original required delivery date of January 23, 2027.
Rubber and Plastics Hoses and Belting Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332510
New
DIBBS
PIN, STRAIGHT, HEADLE
Solicitation # SPE7M4-26-T-290V
The contract pertains to the procurement of a pin, straight, headless item with NSN 5315-01-164-5823 and part number 19221-1, supplied by EATON AEROSPACE LLC, under solicitation SPE7M4-26-T-290V. One unit is required to be delivered within 20 days FOB origin, with no tolerance for quantity variance. All deliveries must be made to the specified military receiving location at Fort Irwin, California, using the fastest traceable shipping method—parcel post is prohibited. Packaging must comply with ASTM D3951, while marking and labeling are governed by MIL-STD-129 and the DLA Master List of Technical and Quality Requirements, which override any conflicting standards. The item is classified as a critical application product and must be marked in accordance with MIL-STD-130N. The use of Class I ozone-depleting chemicals is strictly forbidden, and any substitute chemicals require prior approval unless explicitly permitted by the specification. The unit of issue is each, and palletization must adhere to DLA’s packaging requirements. Delivery is due by July 27, 2026, and all government-specific identifiers and codes, including the RDD, DODAAC, and procurement request numbers, must be accurately applied to the shipment for proper tracking and receipt.
Hardware Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332613
New
DIBBS
SPRING, HELICAL, COMPRES
Solicitation # SPE7M4-26-T-291G
This contract specifies the procurement of 20 helical compression springs with the NSN 5360-01-392-0755 from Vickers Inc, Sterer Engineering & Manufacturing Division in Los Angeles, CA. The technical and quality requirements for this item are governed by the DLA Master List of Technical and Quality Requirements, with revisions effective on either the solicitation issue date or award date depending on the acquisition type. Packaging must comply with DLA standards, and the use of Class I ozone-depleting chemicals is strictly prohibited in manufacturing or incorporation, overriding any conflicting specification requirements unless the substitute chemicals are explicitly authorized or approved. The contract was issued under solicitation number SPE7M4-26-T-291G with a response deadline of August 10, 2026, and a posted date of July 29, 2026. The delivery schedule requires completion within 147 days after award, with performance location designated as Hill AFB, Utah, 84056-5734. The purchasing agency is the Department of Defense’s Fluid Handling Division, and the primary point of contact is Rory O’Reilly, reachable via email and phone provided. This solicitation falls under NAICS code 332613 and is classified as a federal procurement activity.
Spring Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 11 days
View Details
NAICS: 326220
New
DIBBS
HOSE, AIR DUCT
Solicitation # SPE7M4-26-T-290Y
This contract specifies the procurement of an air duct hose designated by NSN 4720016448140, with a single unit required and a delivery timeline of 140 days FOB destination. The item is classified as a critical application item and must comply with MIL-PRF-32107/12, Revision D dated 05/31/2022, along with referenced quality assurance provisions including QAP 16236 and MIL-PRF-32107 Supplement 1. Shelf life is strictly defined at 60 months with no extension permitted, and the item is labeled as Type I under shelf-life code S. Packaging must adhere to MIL-STD-2073-1E and MIL-STD-129 marking standards, with palletization following DLA packaging requirements. The hose must be free of ozone-depleting chemicals and any intentional addition of mercury or mercury-containing compounds, except for specific exempted uses such as in batteries, fluorescent lights, or instrument controls specified by NAVSEA, which must include secondary containment if portable. Inspection and acceptance occur at origin, and the contractor must perform first article testing as required under FAR 52.209-3, with a separate line item designated for this purpose, though no separate charge is assumed unless explicitly quoted. Delivery is directed to USS GERALD R FORD CVN 78 at FPO AE 09523 via fastest traceable means, with parcel post explicitly prohibited. All technical and quality requirements are governed by the DLA Master List referenced in the document, and any substitution of materials requires prior approval. The contract prohibits any use of government identification on rejected items and applies to full and open competition with no set-aside.
Rubber and Plastics Hoses and Belting Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 11 days
View Details
NAICS: 313320
New
DIBBS
HOSE ASSEMBLY, NONME
Solicitation # SPE7M4-26-T-290Z
This contract pertains to the procurement of a single nonmetallic hose assembly, sized at 6 inches and 20 inches in length, manufactured to meet the military specification for high-temperature, medium-pressure tetrafluoroethylene hose used in UH-60 helicopter applications. The item is identified by NSN 4720-00-147-1696 and is listed on the Qualified Products List, requiring compliance with approved manufacturers and technical standards including MIL-DTL-25579H, MS8006D, and MIL-STD-130N for marking and configuration control. The hose must not contain any Class I ozone-depleting chemicals, and any substitution of materials must be pre-approved. Technical and quality requirements referenced from the DLA Master List supersede all other specifications, and packaging must adhere to ASTM D3951 while aligning with MIL-STD-129 labeling and DLA-specific packaging directives, including palletization per RP001. The item is designated as a critical application component with strict compliance requirements. Delivery is required within ten days of contract award, FOB origin, with zero percent variance allowed in quantity, and inspection and acceptance occur at the destination. The sole unit is to be delivered to the U.S. Army SSA Bulgaria facility at Novo Selo Training Area, Building 7000, Mokren 8994, Bulgaria, under Shipment RDD 555, following DLA Transport Procedure Notes C19 and C20. Marking must include the contract number SPE7M4-26-T-290Z, procurement request 7017659456, and government identifier WK4GDV62090174. The solicitation was issued on July 29, 2026, with responses due by August 10, 2026, and the original required delivery date is July 31, 2026. The contract is under the Department of Defense, Fluid Handling Division, and all deliverables must conform to DLA’s authorized unit of issue and procurement protocols.
Fabric Coating Mills

POSTED

about 15 hours ago

DEADLINE

in 11 days
View Details
NAICS: 326220
New
DIBBS
HOSE, AIR DUCT
Solicitation # SPE7M4-26-T-290X
The contract is for one unit of a hose and air duct, identified by NSN 4720-01-644-8032, under solicitation SPE7M4-26-T-290X, with a required delivery within 20 days of award and delivery FOB destination. The product must comply with technical specifications outlined in MIL-PRF-32107/3 and MIL-PRF-32107 Sup 1, as defined in the DLA Master List of Technical and Quality Requirements, which take precedence over all other standards. Packaging must adhere to ASTM D3951 and be marked and labeled per MIL-STD-129, with palletization following DLA Packaging Requirements for Procurement. The item is subject to full and open competition, with zero tolerance for quantity variance, and inspection and acceptance occur at the final destination. The delivery address is USS GERALD R FORD CVN 78, FPO AE 09523, with shipment required via fastest traceable means, excluding parcel post, and transportation logistics governed by DLAD PROC NOTES C19 and C20. The required delivery date is July 27, 2026, and the contract includes government-only fields for internal tracking and disposition. The point of contact for the solicitation is Blake Tushar of the Department of Defense’s Fluid Handling Division.
Rubber and Plastics Hoses and Belting Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 11 days
View Details