Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

HOSE, NONMETALLIC

Active
SPE7M4-26-T-259XFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract calls for the procurement of 36 feet of nonmetallic hose with a 1-inch inner diameter, identified by NSN 4720-01-163-0195, conforming to Military Specification MIL-DTL-52471F(3) Supplement 1, Revision F dated February 8, 2022, with part number M52471/5-16. The hose is a primary Qualified Products List item, requiring strict adherence to the latest edition of QPL-52471, and must comply with all technical and quality requirements from the DLA Master List of Technical and Quality Requirements. The item is classified as a critical application item with a non-extendable 120-month shelf life, mandating specific shelf-life markings per MIL-STD-129 that include the manufactured, cured, assembled, or packed date and the expiration or inspect/test date. Markings must be repeated at intervals not exceeding 20 inches, and end sealant is not required. Packaging must follow MIL-H-775 and MIL-STD-2073-1E standards with a block pressure method, Class 1 drying, no preservative or wrap materials, D3 unit and intermediate containers, and a Pack Code of U. Palletization adheres to DLA Packaging Requirements for Procurement. The supply is subject to prohibition on Class I ozone-depleting chemicals, and substitute chemicals require prior approval unless explicitly authorized by the specification. Delivery is FOB origin with a 41-day ADO timeline, originally required by February 9, 2025, and a need ship date of November 19, 2024, to be delivered to the DDSP New Cumberland Facility in Pennsylvania. The contract allows a 10% variance in quantity and requires inspection and acceptance at the destination. Invoicing must be processed through Wide Area Workflow, with contractors required to be registered in the System for Award Management and WAWF. The solicitation is a Small Business Set-Aside under NAICS code 332999, incorporating the DLA Master Solicitation for Automated Simplified Acquisitions Revision 105, and is subject to the Berry Amendment and Buy American Act. Cybersecurity compliance with NIST SP 800-171 is mandated via a deviation, and several FAR clauses related to whistleblower rights, information disclosure, subcontract

General Info

Procure 36 feet of MIL-DTL-52471F(3)-compliant 1-inch hose, NSN 4720-01-163-0195, FOB origin, 120-month shelf life, DLA packaging, delivery to New Cumberland, PA.

Agency

Department Of Defense → FLUID HANDLING DIVISIONView Agency

NAICS

332999 - All Other Miscellaneous Fabricated Metal Product ManufacturingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(1)

RFQ SPE7M4-26-T-259X for Fluid Handling Division

PDFrfq

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → FLUID HANDLING DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → FLUID HANDLING DIVISION
View Agency Profile
Office AddressUS

Full Description

Show more
HOSE,NONMETALLIC
HOSE, NONMETALLIC
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ002: CONFIGURATION CHANGE MANAGEMENT ENGINEERING CHANGE PROPOSAL
REQUEST FOR VARIANCE (DEVIATION OR WAIVER)
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
INCLUDE CS118 OBJECT TEXT ID ST
CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE
USED NOR INCORPORATED IN ANY ITEMS TO BE
DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION
SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT
DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS.
SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR
APPROVAL UNLESS THEY ARE AUTHORIZED BY THE
SPECIFICATION REQUIREMENTS.
THIS NSN IS LISTED AS A PRIMARY QPL OR QML
THEREFORE THE QUALIFIED PRODUCTS LIST OR
QUALIFIED MANUFACTURERS LIST IS APPLICABLE.
EXCEPTION TO MARKING REQUIREMENTS: EACH SET OF
MARKINGS SHALL BE REPEATED AT INTERVALS NOT
EXCEEDING 20 INCHES. END SEALANT NOT REQUIRED.
SHELF-LIFE MARKINGS REQUIRED PER 5.2.1 OF MIL-STD-129: SHELF-LIFE
MARKINGS SHALL BE SHOWN AS PART OF THE ITEM IDENTIFICATION DATA ON UNIT
PACKS, INTERMEDIATE CONTAINERS, EXTERIOR CONTAINERS, AND UNPACKED ITEMS.
SHELF-LIFE MARKINGS SHALL INCLUDE THE MANUFACTURED, CURED, ASSEMBLED, OR
PACKED DATE (APPLY ONE DATE), AND THE EXPIRATION OR INSPECT/TEST DATE,
AS APPROPRIATE.
1 IN. ID, BULK LG. PER MILITARY SPECIFICATION TITLED
"HOSE AND HOSE ASSEMBLIES, RUBBER: HYDRAULIC PRESSURE-TYPE<(>,<)>
GENERAL SPECIFICATION FOR." THE LATEST EDITION OF QPL-52471 APPLIES.
RS030: Shelf-life requirement RS001 for a TYPE I (CODE W) item with a shelf life of 120 months (non-extendable) applies to this item.
CRITICAL APPLICATION ITEM
TDP Rev A Gen 1 IAW BASIC SPEC NR MIL-DTL-52471/5C NOT 2 REVISION NR C DTD 06/05/2019 PART PIECE NUMBER: M52471/5-16
SPE7M4-26-T-259X
SECTION B
TDP Rev A Gen 1 IAW REFERENCE SPEC NR MIL-DTL-52471F(3) SUP 1 REVISION NR F DTD 02/08/2022 PART PIECE NUMBER: M52471/5-16
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7007762066 0001 FT 36.000
NSN/MATERIAL:4720011630195
DELIVERY (IN DAYS):0041
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 10% MINUS 10%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:BLK PRES MTHD:AE CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0
UNIT CONT:D3 OPI:M
INTRMDTE CONT:D3 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:32 -32 Type I, shelf life
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PACKAGING SHALL BE IAW MIL-H-775.
PARCEL POST ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
SPE7M4-26-T-259X
SECTION B
PR: 7007762066 PRLI: 0001 CONT’D
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
Need Ship Date:11/19/2024 Original Required Delivery Date:02/09/2025
SPE7M4-26-T-259X NSN/Part Number: 4720-01-163-0195 Quantity: 36 FT Purchase Request: 7007762066QTY: 36 Delivery: 41 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332999
New
DIBBS
AIR SPRING, VEHICULAThis contract is for the procurement of three air springs for vehicle applications, identified by NSN 2510-01-672-6313 and part number 1R12-580, supplied by STEMCO INC a sub of COLTEC. The items must comply with stringent technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, and the use of Class I ozone depleting chemicals is strictly prohibited across all components, with any substitute chemicals requiring prior approval unless explicitly authorized by specifications. Delivery is required FOB origin within 168 days from the contract award, with no tolerance for quantity variance, and acceptance occurs at the destination point. Packaging must adhere to MIL-STD-2073-1E and MIL-STD-129 standards, with specific methods outlined for preservation, wrapping, cushioning, and containerization, and palletization must meet DLA packaging requirements. The delivery address is the DLA Distribution facility in New Cumberland, Pennsylvania, with the same location serving as the freight shipping address. The required ship date is January 12, 2027, with an original delivery deadline of October 14, 2026. The solicitation number is SPE7L3-26-T-121Q, issued under a federal procurement with NAICS code 332999, and all units of issue follow DoD standards as defined by DLA. The contract emphasizes strict compliance with labeling, packing, transportation procedures, and regulatory restrictions, with all requirements controlled by the DLA revisions in effect at the time of solicitation or award.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 17 hours ago

DEADLINE

in 2 days
View Details
NAICS: 332999
New
DIBBS
HOSE ASSEMBLY, NONMEThe contract pertains to the procurement of a non-metric hose assembly identified by NSN 4720-01-457-3526 and part number 82557 supplied by Eaton Corporation, with a requirement for 11 units at a unit price of $11.00, totaling $121.00. Delivery is to be made FOB origin within 71 days of contract award, with no tolerance for quantity variance—exactly 11 units must be delivered. Inspection and acceptance occur at the destination, and the item is classified as a critical application component requiring strict adherence to technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, which supersedes any other specifications including ASTM D3951. Packaging must conform to MIL-STD-129 for marking and labeling and comply with RP001 DLA Packaging Requirements for Procurement, including palletization standards, while excluding government identification from non-accepted supplies per RQ011. The delivery destination is the DLA Distribution facility at New Cumberland, Pennsylvania, with shipping instructions governed by DLAD Proc Notes C19 and C20. The original required delivery date was March 16, 2025, though the need ship date has been updated to April 8, 2025, under solicitation SPE7M4-26-T-263T, issued by the Department of Defense’s Fluid Handling Division. The procurement follows simplified acquisition procedures, and all technical specifications referenced through R or I numbers are defined by the DLA Master List revision in effect at the solicitation issue date.
FLUID HANDLING DIVISION

POSTED

about 17 hours ago

DEADLINE

in 2 days
View Details

More opportunities from Department Of Defense → FLUID HANDLING DIVISION

Same awarding agency

NAICS: 488190
New
DIBBS
STRAINER, SEDIMENTThe contract pertains to the procurement of 135 units of a sediment strainer, identified by NSN 4730-01-507-2882 and part number 1340130, under solicitation SPE7M3-26-T-7469, issued by the Defense Logistics Agency’s Fluid Handling Division. Deliveries are split between two CLINs: 110 units to be delivered to DLA Distribution San Diego, California, and 25 units to DLA Distribution Cherry Point, North Carolina. All items must be delivered within 68 days of order issuance, with the original required delivery date set for June 7, 2027, and a need ship date of October 4, 2026. The contract specifies FOB destination delivery terms, with inspection and acceptance occurring at the destination locations. Packaging must comply with ASTM D3951, but all requirements from the DLA Master List of Technical and Quality Requirements supersede this standard. Marking and labeling must adhere to MIL-STD-129, including Data Matrix barcodes and all prescribed data fields such as NSN, lot number, and quantity. Palletization must follow RP001: DLA Packaging Requirements for Procurement, and the unit of issue is each, with no variance allowed in quantity. The contract incorporates multiple FAR and DFARS clauses governing compliance with labor, safety, cybersecurity, and procurement integrity standards. Key clauses include those related to combating trafficking in persons, employment eligibility verification, hazardous material identification, sustainable products, and safeguarding contractor information systems. The contractor must ensure compliance with the Hazard Communication Standard and the prohibition on hexavalent chromium use. Electronic invoicing is mandated through Wide Area WorkFlow (WAWF), with payment requests tied to the DoDAAC system. The contract type is not specified at this stage but will be determined upon award under clause 52.216-1 Alternate I. Offerors are required to provide Unique Entity Identifiers and certify their small business or socioeconomic status, including participation in programs such as HUBZone, SDVOSB, WOSB, or EDWOSB. Proposals must be submitted via the DIBBS portal by the stated deadline, with technical and administrative inquiries handled through designated DLA contacts. The solicitation emphasizes strict adherence to documentation, marking, and delivery protocols with no tolerance for deviations in quantity or packaging standards.
Other Support Activities for Air Transportation

POSTED

about 17 hours ago

DEADLINE

in 2 days
View Details
NAICS: 331210
New
DIBBS
TUBE, METALLICThe contract is for the procurement of metallic tubing, specifically 27.54 linear feet of copper tubing with part number 3P669 and NSN 4710011374340, under solicitation SPE7M4-26-T-266R. Delivery is required 146 days after award, with an original required delivery date of October 14, 2026, and a need ship date of December 21, 2026. The tubing is to be delivered FOB origin in accordance with the DLA Master List of Technical and Quality Requirements, which supersede all other standards including ASTM D3951 for packaging. Packaging and marking must strictly comply with MIL-STD-129 for labeling, bar-coding, unit of issue, and quantity per unit pack, with palletization adhering to RP001: DLA Packaging Requirements for Procurement. The destination for delivery is the DLA Distribution facility in New Cumberland, PA, and all inspections and acceptances occur at the destination point. The contract is governed by a fixed-price contract structure under FAR clauses 52.216-1 Alternate I and 52.246-2, with no price variance permitted. Payment must be processed exclusively through Wide Area WorkFlow (WAWF), and invoicing must follow DFARS requirements. The offeror must hold a valid UEI and CAGE code and complete all required socioeconomic and compliance representations, including those related to trafficking in persons, employment eligibility, sustainable products, hazardous materials, and safeguarding covered defense information under clause 252.204-7012. The solicitation requires electronic submission via DIBBS by July 27, 2026, with the Fluid Handling Division of the Department of Defense as the contracting office, and Rory O’Reilly designated as the primary point of contact. All technical and quality specifications are tied to the latest revision of the DLA Master List effective on the solicitation issue date, with precedence over all other referenced standards.
Iron and Steel Pipe and Tube Manufacturing from Purchased Steel

POSTED

about 17 hours ago

DEADLINE

in 2 days
View Details
NAICS: 332996
New
DIBBS
ADAPTER, STRAIGHT, TUThe contract specifies the procurement of a straight tube-to-hose adapter with part number MS24587-24AA, manufactured from aluminum alloy and complying with MIL-DTL-5070F Supplement 1 and the baseline specification MS24587E revision E dated 07/20/2023. The item is classified as a critical application component with Class 3 threads and is listed on the Qualified Products List, requiring strict adherence to quality standards. The adapter must be free of mercury and mercury-containing compounds except for approved exceptions such as batteries, fluorescent lights, sensors, weapon systems, and chemical reagents specified by NAVSEA; portable devices with mercury must include shock-proof housing and a secondary containment barrier per NAVSEA 5100-003D. The use of Class I ozone-depleting chemicals is strictly prohibited, and any substitute materials require prior approval. Packaging must follow ASTM D3951 and MIL-STD-129 labeling requirements, with palletization conforming to DLA’s RP001 packaging standards, and all DLA Master List technical and quality requirements supersede any conflicting specifications. The contract includes two line items totaling 828 units at unit prices of $136 and $556 respectively, with a combined total value reflecting full quantity commitment. Delivery is required in 65 days FOB origin, with no tolerance for quantity variance, and inspection and acceptance occur at the destination. Shipments must be directed to either Robins Air Force Base, Georgia, or Tinker Air Force Base, Oklahoma, with transportation governed by DLAD Procurement Notes C19 and C20. The referenced solicitation number is SPE7M4-26-T-262U, issued by the Department of Defense’s Fluid Handling Division, with solicitation posted on July 15, 2026, and responses due by July 27, 2026. The primary point of contact is Blake Tushar, and the item is identified by NSN 4730-00-844-3483. The original required delivery date is August 2, 2026, with a need-by ship date of March 24 or 26, 2026, depending on the shipment destination.
Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 2 days
View Details
NAICS: 331210
New
DIBBS
TUBE, TIE RODThe contract specifies the procurement of TUBE, TIE ROD with National Stock Number 4710-01-267-5729, under solicitation SPE7M4-26-T-266S, issued by the Department of Defense’s Fluid Handling Division. The item is to be delivered in a quantity of two units at a unit price of $2.000, with delivery required 177 days after award, with an original delivery date of October 14, 2026, and a need ship date of January 21, 2027. Delivery is FOB origin, with inspection and acceptance occurring at the destination facility at 2083 Normandy Drive, New Cumberland, PA 17070-5002. Packaging must comply with ASTM D3951, but must yield to the more stringent requirements of the DLA Master List of Technical and Quality Requirements, which take precedence. All packaging and labeling must adhere to MIL-STD-129, including barcoding and unit-of-issue accuracy, with palletization governed by RP001: DLA Packaging Requirements for Procurement. The use of Class I ozone-depleting chemicals is strictly prohibited in any component, overriding any conflicting specification provisions unless a substitute is explicitly authorized. Hazardous materials must be labeled per 29 CFR 1910.1200, with full Safety Data Sheets submitted prior to award, and government identification must be removed from any non-accepted supplies. The contract mandates electronic invoicing through WAWF and requires compliance with multiple FAR and DFARS clauses, including those governing employment eligibility, trafficking in persons, sustainable products, hazardous material identification, cybersecurity safeguards, and whistleblower protections. The offering entity must provide a Unique Entity ID and CAGE code and represent its small business status if applicable, though no set-aside is specified. Payment and administrative contacts are directed to Rory O’Reilly of DLA Land and Maritime, and all proposals must be submitted electronically via the DLA Internet Bid Board System by July 30, 2026. No contract value total is explicitly stated due to incomplete pricing data, and no formal evaluation factors or attachments are included in the documentation.
Iron and Steel Pipe and Tube Manufacturing from Purchased Steel

POSTED

about 17 hours ago

DEADLINE

in 2 days
View Details