Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

HOUSING, ANTIFRICTION B

Active
SPE4A7-26-T-609BFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract specifies the procurement of a housing for an antifriction bearing used in aircraft gas turbine engines, identified by NSN 2840-00-484-1445 and part number 3012828, with a quantity of 21 units. Delivery is required within 171 days FOB origin, with no variance allowed in quantity, and both inspection and acceptance are to occur at the manufacturer’s origin. The item must comply with MIL-STD-2073-1E packaging standards, including specific preservative methods, wrapping materials, and unit packaging, and all marking must adhere to MIL-STD-129 without special markings. The delivery destination is DLA Distribution Cherry Point in North Carolina. Technical and quality requirements referenced through R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with revisions tied to the solicitation issue date or amendment dates for large acquisitions. Sampling must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and attribute verification levels are strictly defined. Measuring and test equipment must be calibrated and compliant, and the Canadian Commercial Corporation and Pratt & Whitney Canada Corp are listed as authorized sources. Item Unique Identification is not required per DFARS 252.211-7003(c)(1)(i), and transportation logistics follow DLA procedural notes C19 and C20. The solicitation was issued on August 4, 2026, with responses due by August 12, 2026, under contract number SPE4A7-26-T-609B, and the original required delivery date is December 3, 2027, with a needed ship date of January 31, 2027.

General Info

Procure 21 bearing housings per NSN 2840-00-484-1445, deliver FOB origin by Dec 3, 2027, comply with MIL-STD-2073-1E and MIL-STD-129.

Agency

Department Of Defense → ASC SUPPLIER OPER AE AND AF DIVView Agency

NAICS

336412 - Aircraft Engine and Engine Parts ManufacturingView NAICS

Place of Performance

PHANTOM RD BLDG 147 BAY A, CHERRY POINT, NC, 28533-5040, US

Set-Aside

NONE

Documents

(1)

SPE4A7-26-T-609B.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC SUPPLIER OPER AE AND AF DIV
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV
View Agency Profile
Office AddressUS
Contacts
Sara DURAN CAMPOS
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
HOUSING,ANTIFRICTION BEARING,AIRCRAFT GA
HOUSING,ANTIFRICTION BEARING,AIRCRAFT GAS TURBINE ENGINE
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
Item Unique Identification is not required by request of the Service customer. DFARS 252.211-7003(c)(1)(i) applies.
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
RT001: MEASURING AND TEST EQUIPMENT
RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
(MANUFACTURERS AND NON-MANUFACTURERS)
CANADIAN COMMERCIAL CORPORATION 98247 P/N 3012828
PRATT & WHITNEY CANADA CORP 00198 P/N 3012828
TDP Rev A Gen 1 IAW REFERENCE REVISION NR DTD PART PIECE NUMBER:
SPE4A7-26-T-609B
SECTION B
PR: 7017741471 PRLI: 0001 CONT’D
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017741471 0001 EA 21.000
NSN/MATERIAL:2840004841445
DELIVERY (IN DAYS):0171
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: ORIGIN
ACCEPTANCE POINT: ORIGIN
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:31 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:EA CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:B
UNIT CONT:DA OPI:M
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
SW3113
DLA DISTRIBUTION CHERRY POINT
PHANTOM RD BLDG 147 BAY A
CHERRY POINT NC 28533-5040
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
SW3113
DLA DISTRIBUTION CHERRY POINT
PHANTOM RD BLDG 147 BAY A
CHERRY POINT NC 28533-5040
US
Need Ship Date:01/31/2027 Original Required Delivery Date:12/03/2027
SPE4A7-26-T-609B
SECTION B
PR: 7017741471 PRLI: 0001 CONT’D

SPE4A7-26-T-609B NSN/Part Number: 2840-00-484-1445 Quantity: 21 EA Purchase Request: 7017741471QTY: 21 Delivery: 171 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 336412
New
DIBBS
CORE ASSY BOND, SPEC
Solicitation # SPE4A7-26-T-612N
The contract seeks the procurement of 20 units of CORE ASSY BOND,SPEC with NSN 2995015940126, to be delivered to W1A8 DLA DISTRIBUTION within 171 days after award. Only two approved sources are listed for this item, identified by the part numbers LM-200-158 under vendors 76005 and 98897. The solicitation is issued as an RFQ through SAM. gov under number SPE4A7726T612N and is strictly electronic; no hard copies are available, and no specifications, plans, or drawings are provided. All responsible suppliers may submit quotes, provided they are received electronically by the deadline of August 12, 2026. The opportunity is open without set-aside restrictions, and responses must be submitted via the online portal. The contracting office is the DLA Aviation based in Richmond, Virginia, with inquiries to be directed to the designated point of contact via email. The NAICS code 336412 indicates this procurement relates to aerospace product and parts manufacturing.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336412
New
DIBBS
SCREW, LOCK PLATE
Solicitation # SPE4A6-26-T-12CK
The contract is for the procurement of 22 screw, lock plate items with NSN 5305-01-626-3828 under solicitation SPE4A6-26-T-12CK, issued by the Defense Logistics Agency’s ASC Commodities Division. Delivery is required within 171 days after award, and responses must be submitted by August 12, 2026. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions tied to the solicitation or award date depending on acquisition size. Packaging must comply with DLA standards, and non-accepted supplies must have all government identification removed prior to return. Items must be physically marked in accordance with RQ017, ensuring identification even when bare. Sampling procedures must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances accepted unless otherwise specified, and attributes are to be verified at designated levels: VII for critical, IV for major, and II for minor. Export control restrictions under ITAR or EAR apply to associated technical data, requiring prior government authorization for any disclosure or export, including to foreign nationals within the U.S. Only contractors with approved U.S./Canada Joint Certification Program status, completed DLA export control training, and formal authorization may access the controlled data, in compliance with DFARS 252.225-7048.
ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336412
New
DIBBS
RING, WEARING
Solicitation # SPE4A5-26-T-324R
The contract pertains to the procurement of four wearable rings identified by NSN 2935-01-507-5730 and part number 764297 from Hamilton Sundstrand Corporation under solicitation SPE4A5-26-T-324R. The item is classified as a commercial item and is subject to comprehensive technical, quality, and packaging requirements referenced from the DLA Master List of Technical and Quality Requirements. The supplier must comply with DLA packaging standards per MIL-STD-2073-1E and marking requirements per MIL-STD-129, with no special marking needed. Unit of issue is each, with a fixed quantity of four units, and delivery is FOB origin with a 171-day lead time to be completed by October 27, 2027. Final inspection and acceptance occur at the destination, specifically the DLA Distribution Depot in Tinker AFB, Oklahoma, and no quantity variance is permitted. Item Unique Identification is waived per customer request, and configuration change management, deviation requests, and removal of government identification from non-accepted supplies are strictly governed by specified quality clauses. Sampling must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances unless otherwise stated, and measuring and test equipment must meet defined standards. The supplier must also maintain CMMC Level 2 self-assessment compliance and adhere to physical item marking requirements. All shipments must align with DLA transport procedures and arrive no later than January 31, 2027.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336412
New
DIBBS
INSULATION BLANKET, THE
Solicitation # SPE4A7-26-T-613V
The contract pertains to the procurement of one thermal insulation blanket, specifically designed for aircraft gas applications, identified by NSN 2840-99-842-9242 and part number 99A9266M. The item is supplied by DEALER DISTRIBUTOR for CAGE K0510, SEAL DYNAMICS, and DARCHEM ENGINEERING LTD, with delivery required within 171 days of contract award, originally scheduled for October 15, 2026, and a firm ship date of January 31, 2027. The delivery is FOB origin, with inspection and acceptance occurring at the destination, and no quantity variance is permitted. Packaging must comply strictly with MIL-STD-2073-1E, including specific preservation methods, unit packaging, and intermediate container specifications, while marking adheres to MIL-STD-129 without special codes. Palletization follows DLA’s packaging requirements, and the final delivery destination is the DLA Distribution Center at New Cumberland, Pennsylvania. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, with applicable revisions determined by acquisition type and solicitation amendments. Sampling and inspection follow MIL-STD-1916 or ASQ H1331, Table 1, with zero non-conformances required unless otherwise stated, and critical, major, and minor attributes are assigned verification levels VII, IV, and II, or AQLs of 0.1, 1.0, and 4.0 respectively. The unit of issue is each (EA), and the contract falls under the DoD authorized procurement framework. Removal of government identification from non-accepted items is mandated, and transportation logistics adhere to DLA Procurement Notes C19 and C20. No item unique identification is required, as per DFARS 252.211-7003(c)(1)(i).
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336412
New
DIBBS
DISK, VALVE
Solicitation # SPE4A5-26-T-323M
The contract is for the procurement of 10 DISK, VALVE units identified by NSN 2915-01-234-0934 and Boeing part number 36-4770-503, with a unit price of $10.00 and a total contract value of $100.00. Delivery is required within 171 days after notice, with the required delivery date set for July 29, 2028 and a need ship date of January 31, 2027. The item must be delivered FOB origin, with no tolerance for quantity variance, and is subject to inspection and acceptance at the destination. Packaging must comply with ASTM D3951 and MIL-STD-129 standards, and palletization must follow DLA’s RP001 packaging requirements. Technical and quality specifications referenced by R or I numbers from the DLA Master List of Requirements apply and supersede any conflicting standards. The item is not required to have Unique Item Identification, per DFARS 252.211-7003(c)(1)(i). Cybersecurity compliance at CMMC Level 2 via self-assessment is mandatory, and removal of government identification from non-accepted supplies is required. All items must be marked in accordance with physical identification guidelines. The delivery address is the DLA Distribution facility in New Cumberland, Pennsylvania. The solicitation was issued under contract number SPE4A5-26-T-323M, with a response deadline of August 12, 2026, and the NAICS code is 336412.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336412
New
DIBBS
PLATE, COMPONENT MOUNTI
Solicitation # SPE4A5-26-T-322Y
This contract pertains to the procurement of a component mounting plate for aircraft gas turbine systems, identified by NSN 2840-01-323-5646 and part number 23007075, with a quantity of two units to be delivered within 171 days under the solicitation SPE4A5-26-T-322Y. Delivery is FOB origin, and inspection and acceptance occur at the destination, with strict zero tolerance for quantity variance. Packaging must comply with MIL-STD-2073-1E, including specific preservative methods, wrap materials, and container codes, and marking must follow MIL-STD-129 without any special marking codes. Palletization adheres to DLA packaging requirements, and the shipment is addressed to the DLA Distribution facility in New Cumberland, Pennsylvania. The contract enforces stringent quality and compliance standards, incorporating technical and quality requirements referenced from the DLA Master List, including tailored higher-level quality provisions for manufacturers and non-manufacturers. Sampling follows MIL-STD-1916 or comparable zero-based plans with designated verification levels and AQLs for critical, major, and minor attributes; otherwise, unspecified attributes are treated as major. The supplier must implement configuration change management protocols and submit engineering change proposals or variance requests as required. Physical identification of parts must be clearly marked, and cybersecurity compliance is mandated at CMMC Level 2 through self-assessment. The item is classified as a critical application item, and all documentation, including transportation and freight instructions, aligns with DLA procedural notes and federal unit of issue standards. The delivery deadline is set for January 31, 2027, with an original required date of December 28, 2027.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336412
New
DIBBS
PLUG ASSEMBLY, CUTOF
Solicitation # SPE4A5-26-T-321E
The contract pertains to the procurement of a Plug Assembly, Cutof, identified by NSN 2915-00-675-0138 and part number 336764 from Honeywell International Inc, with a total quantity of seven units to be delivered FOB origin. The delivery is required within 171 days of the contract award, with inspection and acceptance occurring at the destination warehouse in Tracy, California. The item must be packaged in strict accordance with MIL-STD-2073-1E, including specific packaging methods, materials, and unit and intermediate container specifications, and marked per MIL-STD-129 with no special markings required. Packaging must also comply with DLA's procurement requirements. Sampling and verification follow MIL-STD-1916 or ASQ H1331, Table 1, with zero non-conformances required unless otherwise specified, and attributes are to be classified with corresponding verification levels or AQLs. Technical and quality requirements referenced by R and I numbers are governed by the DLA Master List, with revisions controlled by the solicitation or award date depending on acquisition size. CMMC Level 2 self-assessment is mandatory, and physical identification of the bare item must be marked as required. Although Item Unique Identification is not mandated per the service customer’s request, DFARS 252.211-7003(c)(1)(i) applies. Measuring and test equipment used must meet RT001 requirements. The contract was solicited under SPE4A5-26-T-321E with a response deadline in August 2026 and the original required delivery date set for November 2027, though the need ship date is January 2027. All transportation logistics are subject to DLAD procedural notes C19 and C20.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336412
New
DIBBS
GOVERNMENT FIRST ARTIC
Solicitation # SPE4A7-26-Q-0953
The U.S. Department of Defense through DLA Aviation is soliciting quotes for one unit of NSN 2915007279944 VALVE, TRANSFER-SET under solicitation number SPE4A726Q0953, with a posted date of August 4, 2026, and a response deadline of August 19, 2026. The requirement is categorized under NAICS code 336412 and is open to all responsible sources without set-aside restrictions. Three delivery lines are specified: one unit to be delivered to DLA Distribution Cherry Point within 697 days after contract award, one unit to be delivered to location 0090 within 90 days, and another unit to be delivered to location 0547 within 547 days, each with a unit of issue of EA. Quotes may be submitted electronically and are expected to be received by the deadline to be considered. All inquiries must be directed via email to the designated point of contact, DibbsBSM@dla.mil, with additional solicitation details available through the provided SAM.gov link or the DIBBS portal using the solicitation number.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 3 hours ago

DEADLINE

in 15 days
View Details
NAICS: 336412
New
DIBBS
PLATE, INDEX
Solicitation # SPE4A7-26-T-609G
The solicitation seeks quotes for six units of NSN 2915009188941, PLATE, INDEX, to be delivered to DLA DISTRIBUTION CHERRY POINT within 171 days after award. The procurement is conducted under solicitation number SPE4A726T609G, issued by the DLA Aviation office in Richmond, Virginia, and is classified as a combined action with no set-aside requirements. Only the approved source, 45934 545048, is designated for this item, though all responsible sources may submit quotes if received on time. The solicitation is exclusively electronic, with no hard copies available, and no technical specifications, plans, or drawings are provided. Quotes must be submitted electronically through the SAM.gov portal before the deadline of August 12, 2026, with the RFQ accessible via the provided link. For inquiries, all communications must be directed to the designated buyer email as referenced in the solicitation document, with additional guidance available through the DIBBS website using the solicitation number.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336412
New
DIBBS
PIPE INTAKE, TURBOSU
Solicitation # SPE4A7-26-T-612H
The contract pertains to the procurement of PIPE INTAKE, TURBOSU with NSN 2950-01-556-3044, issued under solicitation SPE4A7-26-T-612H by the Department of Defense through DLA. Two line items are specified: 10 units at $10 each and 21 units at $21 each, totaling 31 units, with a strict delivery timeline of 171 days from contract award and a required ship date of January 31, 2027, following an original delivery target of January 12, 2027. Delivery is FOB origin with no quantity variance allowed, and inspection and acceptance occur at the destination. Packaging must comply with ASTM D3951 but is subordinate to the DLA Master List of Technical and Quality Requirements, which govern all technical and quality standards referenced by R or I numbers. Packaging and labeling are required to follow MIL-STD-129, with palletization adhering to RP001 DLA Packaging Requirements. Two distinct shipping addresses are designated—one for parcel post and freight in Tracy, California, and another for freight in Albany, Georgia—both tied to specific DLA distribution points. The unit of issue is each (EA), consistent with DoD authorization, and all documentation references DLA procedural notes for transportation logistics. The contract also includes the invocation of Product Verification Testing under DLA Clause 52.246-9004 at the procurement activity’s discretion, and removal of government identification from non-accepted supplies is mandated. The purchasing organization is the ASC SUPPLIER OPER AE AND AF DIV, with Sara Duran Campos as the primary contact.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336412
New
DIBBS
DUCT ASSEMBLY
Solicitation # SPE4A5-26-Q-0665
The U.S. Department of Defense through DLA Aviation is seeking quotes for a single Duct Assembly with NSN 2840011100713 under solicitation SPE4A526Q0665, which is a Small Business Set Aside for total contracting. The item is to be delivered by 129 days after award to W1A8 DLA District San Joaquin, with quotes due by August 6, 2026. Only approved sources, identified as 00198 3030059 and 98247 3030059, are eligible to respond, and submissions must be made electronically; hard copies are not available. No technical specifications, plans, or drawings are provided, and all responsible sources may submit a quote if received on time. The procurement is classified under NAICS code 336412, and the contracting office is located in Richmond, Virginia, with the primary point of contact for questions being the buyer listed in block 5 of the solicitation document, reachable via email at DibbsBSM@dla.mil. The solicitation can only be accessed online through the provided SAM.gov link, and bidders are instructed to navigate to DIBBS for further details if the link fails. The contract type is combined, and the requirement is specifically reserved for small businesses, with no additional set-aside subcategories specified.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 3 hours ago

DEADLINE

in 2 days
View Details
NAICS: 336412
New
DIBBS
SHAFT, ECCENTRIC, TUR
Solicitation # SPE4A5-26-T-321A
The contract pertains to the procurement of five eccentric shafts, part number 195618 with NSN 2915-00-314-5937, manufactured by Honeywell International Inc, under solicitation SPE4A5-26-T-321A. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced by R or I numbers, which supersede any conflicting standards. The item must be packaged in compliance with ASTM D3951, but DLA standards take precedence, and all packaging must be marked and labeled per MIL-STD-129 in accordance with RP001 packaging requirements. Unit of issue is each (EA), with no tolerance for variance in quantity, and delivery is FOB origin to the designated receipt warehouse in Tracy, CA. Inspection and acceptance occur at the destination, with a required delivery date 171 days from contract award and a need ship date of January 31, 2027. Sampling follows MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated, and attribute verification levels are defined as VII, IV, and II for critical, major, and minor characteristics respectively. Cybersecurity requirements mandate CMMC Level 2 self-assessment and covered defense information handling per RD002. Item Unique Identification is not required as per customer request, with DFARS 252.211-7003(c)(1)(i) governing marking. All documentation must comply with SAR and removal of government identification procedures for non-accepted supplies.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details

More opportunities from Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV

Same awarding agency

NAICS: 332510
New
DIBBS
RIVET, BLIND
Solicitation # SPE4A7-26-T-611K
The contract specifies the procurement of 62 boxes of blind rivets with NSN/Part Number 5320-01-330-2847 under solicitation SPE4A7-26-T-611K, with a response deadline of August 12, 2026, and a delivery requirement within 171 days after award. The item is designated as a critical item requiring origin inspection, and all supplies must comply with detailed technical and quality requirements indexed by R or I numbers referenced in the DLA Master List of Technical and Quality Requirements. Packaging must adhere to DLA standards, and documentation for source approval is mandatory. Government identification must be removed from non-accepted supplies, and inspection and acceptance will occur at the origin. Covered defense information is potentially applicable, and tailored higher-level quality requirements govern both manufacturers and non-manufacturers. The place of performance is New Cumberland, Pennsylvania, with Brad Ingram of the Department of Defense, ASC Supplier Operations AE and AF Division, serving as the primary point of contact.
Hardware Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
DRUM ASSEMBLY, WINCH
Solicitation # SPE4A7-26-T-615R
The contract is for the procurement of seven drum assemblies for winches with part number 9-14986 and NSN 1680-00-229-9128, under solicitation SPE4A7-26-T-615R. Delivery is required within 171 days of award, with performance to occur at Tinker AFB, Oklahoma. The solicitation, issued by the Department of Defense’s ASC Supplier Oper AE and AF Division, closed for responses on August 12, 2026. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. The item is subject to stringent configuration management, inspection at origin, and export control regulations under ITAR or EAR, restricting technical data access to contractors with approved JCP certification, completed DOD export training, and formal DLA authorization. Packaging must adhere to DLA standards, and non-accepted supplies must have all government identification removed. Physical marking of bare items and controlled handling of technical data are mandatory per DFARS 252.225-7048. All data sharing involving foreign persons, including U.S. subsidiaries and foreign nationals within the United States, is prohibited without prior government authorization.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334511
New
DIBBS
KEYBOARD, DATA ENTRY
Solicitation # SPE4A7-26-T-615E
The contract is for the procurement of 13 keyboard, data entry units with NSN/Part Number 5895-01-587-7441, classified as a commercial off the shelf item. The solicitation number is SPE4A7-26-T-615E, issued by the Department of Defense’s ASC SUPPLIER OPER AE AND AF DIV, with a response deadline of August 12, 2026, and a required delivery date 171 days after award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, accessible via the provided website, with the revision in effect on the solicitation issue date or award date controlling based on acquisition size and any applicable amendments. Government identification must be removed from non-accepted supplies as per RQ011. The place of performance is designated as San Diego, CA, with Michael Johnson serving as the primary point of contact via email and phone. The NAICS code is 334511, and the procurement falls under federal acquisition guidelines without a specified set-aside type.
Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
BUSHING, MACHINE THREAD
Solicitation # SPE4A7-26-T-610X
The U.S. Department of Defense, through the Defense Logistics Agency Aviation, is seeking quotes for 1,854 machine thread bushings identified by NSN 5365012707546, to be delivered to DLA Distribution Red River within 128 days of award. This procurement is conducted under solicitation SPE4A726T610X, which is exclusively available electronically via the SAM.gov platform, with no hard copies provided. Digitized drawings and military specifications may be accessed online. The solicitation is set aside for SBA-certified Women-Owned Small Businesses under the WOSB Program, and only responsible sources meeting this eligibility criterion may submit responses. All quotes must be submitted electronically through the designated portal prior to the deadline of August 12, 2026. Questions concerning the solicitation should be directed to the designated point of contact via email, as specified in the official document accessible through the provided UI link or the DIBBS website using the solicitation number.
Hardware Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332119
New
DIBBS
SHIM
Solicitation # SPE4A7-26-T-613C
The contract pertains to the procurement of a SHIM part identified by NSN 5365-01-725-5627 and part number 56767-1, manufactured in compliance with Basic Drawing NR 70210 56767 Revision D dated 11/07/1955. A total of 21 units are to be delivered FOB origin with zero variance allowed in quantity, and delivery must be completed within 171 days from the contract award, with an original required delivery date of January 7, 2027, and a need ship date of January 31, 2027. Inspection and acceptance occur at the origin, and packaging must conform to MIL-STD-2073-1E with designated preservation methods, materials, and unit packaging details, while marking follows MIL-STD-129 with no special marking required. Palletization adheres to DLA packaging requirements, and the delivery destination is the DLA Distribution Depot in Tinker AFB, Oklahoma. Sampling and quality verification follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise stated, and attributes are assigned verification levels or AQLs as defined by the drawing or specification. The supplier must comply with DLA’s Master List of Technical and Quality Requirements identified by R or I numbers, including specific provisions for removal of government identification, physical marking of bare items, and documentation for source approval requests. Cybersecurity requirements mandate a CMMC Level 2 Self-Assessment, and covered defense information is subject to RD002 controls. Documentation for source approval must meet RC001 standards, and all units must be shipped in accordance with DLA transport and freight procedures. The solicitation was issued on August 4, 2026, with a response deadline of August 12, 2026, under contract number SPE4A7-26-T-613C, and the primary point of contact is Jessica Gentry.
Metal Crown, Closure, and Other Metal Stamping (except Automotive)

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
PISTON, HYDRAULIC AC
Solicitation # SPE4A7-26-T-612C
The contract specifies the procurement of two hydraulic pistons for air conditioning systems under NSN 1650-01-517-7844 and part number 11463841 from RANDOLPH & BALDWIN, INC. Delivery is required FOB origin within 171 days, with no variance allowed in quantity, and inspection and acceptance are to occur at the manufacturer’s location. All items must comply with DLA’s Master List of Technical and Quality Requirements, which supersede all other standards including ASTM D3951, and packaging must follow MIL-STD-129 and RP001 guidelines. Sampling and inspection adhere to MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated, and critical, major, and minor attributes are assigned verification levels VII, IV, and II respectively. Quality management systems must meet ISO 9001:2015, and measuring equipment must meet RT001 standards. Physical identification and bare item marking are mandatory per RQ017. The contract references revision B of drawing NR 18876 dated 08/13/1997 and revision D dated 07/02/1985, with a newer revision dated 03/14/2024 governing the current requirement. The item must be delivered to the DLA Distribution facility in New Cumberland, PA, with the original required delivery date set for January 27, 2027, and an anticipated ship date of January 31, 2027. The contract was solicited under SPE4A7-26-T-612C, classified under NAICS 336413, with Jamiah Sutton as the primary point of contact.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
VIBRATION ISOLATOR,
Solicitation # SPE4A7-26-T-612K
The contract pertains to the procurement of 605 units of a vibration isolator, identified by NSN 1680-01-552-5433 and part number 51037 from TECH PRODUCTS CORP, under solicitation SPE4A7-26-T-612K. Delivery is required within 67 days of order placement, with FOB origin terms and inspection and acceptance occurring at the destination. The quantity is fixed with no tolerance for variance, and packaging must comply with ASTM D3951 while adhering strictly to MIL-STD-129 for marking and labeling, with palletization governed by DLA’s RP001 packaging requirements. The DLA Master List of Technical and Quality Requirements supersedes any conflicting standards. Sampling follows MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated, and attributes are classified with verification levels VII, IV, and II for critical, major, and minor characteristics respectively. The item is designated as a critical application component and must be physically marked per RQ017. Cybersecurity compliance mandates a CMMC Level 2 self-assessment, and government identification must be removed from non-accepted supplies. The delivery address is DLA Distribution Jacksonville, and transportation guidelines reference DLAD Proc Notes C19 and C20. The original delivery requirement is set for December 12, 2026, with a needed ship date of July 15, 2026. The contract falls under NAICS code 336413 and is managed by the Department of Defense’s ASC Supplier Oper AE and AF Division.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
SAFETY CABLE KIT
Solicitation # SPE4A7-26-T-614C
The Safety Cable Kit is procured under NSN 5342-01-625-3947 with a total quantity of 16 packaging groups, where each packaging group contains 50 individual kits, resulting in 800 total kits. Each kit consists of a cable and a magazine, and each magazine is preloaded with 50 ferrules compliant with specification AS3510-0312K. The unit of issue was changed to packaging group (PG) on April 1, 2022, and all items must adhere to DLA packaging requirements for procurement. Physical identification and bare item marking are mandated, and all technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero nonconformances allowed unless otherwise stated, and attributes are to be classified with verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Inspection and acceptance occur at the manufacturer’s origin, and the item is procured competitively under a military specification. The contract solicitation number is SPE4A7-26-T-614C, with a response deadline of August 12, 2026, a posting date of August 4, 2026, and a delivery requirement 171 days after award. The point of contact is Jamiah Sutton of the Department of Defense’s ASC Supplier Oper AE and AF Division, and the place of performance is New Cumberland, Pennsylvania, with NAICS code 332510 applicable.
Hardware Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
SHIM
Solicitation # SPE4A7-26-T-612E
The contract pertains to the procurement of SHIM with NSN 5365-01-472-5933, totaling 117 units, under solicitation number SPE4A7-26-T-612E, which was posted on August 4, 2026, with responses due by August 12, 2026. The item is subject to strict export control regulations under either ITAR or EAR, meaning any disclosure of associated technical data to foreign persons, regardless of location, requires prior authorization from the U.S. Department of State or Department of Commerce. Foreign nationals employed by U.S. companies or subsidiaries are equally restricted, and compliance with DFARS 252.225-7048 is mandatory. Distribution is limited to DLA contractors who hold valid US/Canada Joint Certification Program certification, have completed mandatory DOD training on handling export-controlled data, and have successfully submitted the DLA Export-Controlled Technical Data Questionnaire, all while receiving formal approval from the DLA controlling authority. The place of performance is specified as New Cumberland, Pennsylvania, with a delivery timeline of 171 days after contract award. The contracting office is under the Department of Defense, specifically the ASC SUPPLIER OPER AE AND AF DIV, with primary point of contact Brandon Smith reachable via email and phone provided.
Hardware Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
SHACKLE
Solicitation # SPE4A7-26-T-614L
This contract, identified by solicitation number SPE4A7-26-T-614L, is for the procurement of 99 units of a shackle with NSN 4030-01-657-5940 and part number 10823-17279 from Fastenal Company Div Oshk, CAGE code 3SPK0. The item must be delivered FOB origin with no variance in quantity and is subject to destination inspection and acceptance. The required delivery date is December 4, 2026, with an allowable delivery window of 171 days, and the shipment must be prepared by January 31, 2027. Packaging and labeling must comply strictly with MIL-STD-129 and ASTM D3951, with packaging requirements subordinate to the DLA Master List of Technical and Quality Requirements. Palletization must adhere to DLA Packaging Requirements for Procurement (RP001). All technical and quality specifications referenced by R or I numbers are governed by the DLA Master List in effect on the solicitation issue date, and sampling must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances unless otherwise stated. Attributes are to be classified as critical, major, or minor with corresponding verification levels or AQLs, and unspecified attributes are deemed major. The unit of issue is each (EA), priced at $99.00, for a total value of $9,801. The delivery destination is DLA Distribution Barstow, Central Receiving Warehouse 7, with specific contact details provided. Transportation and shipping instructions must follow DLAD Proc Notes C19 and C20. The contract includes mandatory physical marking of the item as specified under RQ017 and requires removal of government identification from non-accepted supplies as per RQ011.
Hardware Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 331491
New
DIBBS
GOVERNMENT FIRST ARTIC
Solicitation # SPE4A7-26-T-614K
The contract pertains to the procurement of a single unit of DUCT ASSEMBLY,AIR C with NSN/Part Number 0001S00000052, under solicitation SPE4A7-26-T-614K, with a delivery requirement of 260 days after award. The item is subject to strict export control regulations under either ITAR or EAR, meaning any technical data associated with it cannot be disclosed or transferred to foreign persons, including foreign nationals within the United States, without prior authorization from the Department of State or Department of Commerce. DFARS 252.225-7048 governs the handling of this controlled data, and only DLA contractors with approved US/Canada Joint Certification Program certification, completed training on proper handling of DOD export-controlled technical data, and approved access via the DLA questionnaire are permitted to receive or work with this information. The procurement is managed by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV, with performance scheduled for Key West, Florida, 33040-9059, and the primary point of contact is Georgina Vass at georgina.vass@dla.mil. The solicitation was posted on August 4, 2026, with responses due by August 12, 2026, under a federal contracting mechanism with NAICS code 331491.
Nonferrous Metal (except Copper and Aluminum) Rolling, Drawing, and Extruding

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details