This Solicitation opportunity from Department Of Defense was posted on June 22, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

HOUSING ASSY, DRIVE

Closed

SPE7L1-26-T-739FFederal

Submission Closed07/02/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

Solicitation # SPE7L1-26-Q-1634

This solicitation is for the procurement of 94 units of a breech fitting for a bomb ejector rack, identified as NSN 1095-00-450-8483. The item is classified as a critical gun part with unique requirements and is subject to Government First Article Testing. The supplier must provide two exhibits: one fully assembled with finish and one machined but unassembled and unfinished. Delivery is required within 796 days after receipt of order. The item is designated as a defense article under the International Traffic in Arms Regulations and the Arms Export Control Act, requiring manufacturers or exporters to be registered with the Directorate of Defense Trade Controls. Compliance with the DLA Master List of Technical and Quality Requirements is mandatory, and specific exception data applies to drawing 200415485. This federal acquisition is managed by the Department of Defense Land Supply Chain.

POSTED

DEADLINE

10--JURY STRUT ASSEMBLY

Solicitation # SPE7LX-26-U-002F

This solicitation, issued by the Department of Defense Strategic Acquisition Program Directorate, is for the procurement of five Jury Strut Assemblies under NSN 1055-01-127-8293. The contract is a total small business set-aside with a delivery requirement of 259 days after order. The agreement includes stringent technical and quality requirements, including CMMC Level 2 certification and adherence to DLA packaging and marking standards. Due to the nature of the items, the contract mandates compliance with demilitarization protocols for small arms parts and strict export controls under ITAR and EAR regulations. Access to technical data is limited to approved contractors with US/Canada Joint Certification Program certification.

STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

DEADLINE

53--ANODE,CORROSION PREVEN

Solicitation # SPE4A6-26-Q-1423

The Defense Logistics Agency is soliciting quotes for the procurement of six corrosion prevention anodes under National Stock Number 5342013978773. This requirement is identified by solicitation number SPE4A6-26-Q-1423 and is designated as a total small business set-aside under NAICS code 332994. The approved source for this item is 6RDX4 W3T106427. Items must be delivered to DLA Distribution San Joaquin within 190 days after the order is placed. Interested responsible sources must submit their electronic quotes by the deadline of September 21, 2026. The solicitation is available exclusively online via the DIBBS portal, as no hard copies or separate technical drawings are provided.

Defense Logistics Agency

POSTED

DEADLINE

Solicitation # 46600-eRFQ-001981-2027

The Georgia Department of Public Safety, through the Georgia Public Safety Training Center, has issued solicitation 46600-eRFQ-001981-2027 to procure Staccato holsters. This Request for Quotes was posted on September 10, 2026, with a response deadline of September 16, 2026. The contract will run from the date of award through the end of the state's current fiscal year, which concludes on June 30, with the state maintaining four optional one-year renewal terms. Qualified suppliers must submit their responses via the GA@WORK Marketplace, including a completed cost worksheet, tax compliance forms, and a certificate of non-collusion. Evaluation criteria include cost, minimum experience, and a review of business litigation or debarment history over the last five years. Preference is given to businesses domiciled in Georgia. The procurement process also requires the submission of E-Verify forms and adherence to strict prohibitions regarding inmate contact. Kaylee Maynor serves as the primary point of contact for this solicitation.

Department of Public Safety

POSTED

DEADLINE

Manufacture of Mortar Plungers (NSN 1010017148005)

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Manufacturing of Weapon System Component (NSN 1005-00-714-6365)

POSTED

DEADLINE

Supply of Gun Carriage Assemblies (NSN 1005-01-504-2915)

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

Precision Component Manufacturing (Piston, Gun Gas Cylinder)

POSTED

DEADLINE

Supplier of Small Arms Cleaning Pull-Throughs (NSN 1005-01-478-2261)

POSTED

DEADLINE

Supply of 30mm Small Arms Bore Cleaning Brushes

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

Manufacture and Supply of Resilient Weapon System Mounts (NSN 5342-00-143-0673)

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Supply of Bracket Assembly (NSN 1005015972362)

Defense Logistics Agency

POSTED

1 day ago

DEADLINE

in 10 days

AI Contract Overview

The contract seeks procurement of eight Housing Assemblies, Drive, identified by NSN 1005004507291, to be delivered to the DLA Distribution Depot Hill within 165 days after contract award. The approved source for this item is 05606 175F627, and the solicitation is issued as an RFQ under number SPE7L126T739F, posted on June 22, 2026, with a response deadline of July 2, 2026. All responsible suppliers may submit quotes electronically, as hard copies are not available and no specifications, plans, or drawings are provided. The procurement falls under NAICS code 332994 and is managed by the DLA Land and Maritime office under the Department of Defense, based in Columbus, Ohio. Quotes must be submitted through the designated electronic portal, and inquiries should be directed via email to the point of contact listed in the solicitation document, accessible through the provided link or via the DIBBS website using the solicitation number.

General Info

Eight Housing Assemblies, Drive, NSN 1005004507291, due in 165 days to DLA Depot Hill, sole source 05606 175F627.

Agency

Department Of Defense → LAND SUPPLY CHAINView Agency

NAICS

332994 - Small Arms, Ordnance, and Ordnance Accessories ManufacturingView NAICS

Place of Performance

7537 WARDLEIGH RD BLDG 849W, HILL AFB, UT, 84056-5734, USA

Set-Aside

NONE

Documents

(1)

SPE7L1-26-T-739F.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseClosed

PostedJun 22

Combined Synopsis

Type ChangedJun 22

Combined Synopsis → Solicitation

Response DeadlineJul 2

Deadline has passed

Submission Closed

07/02/2026, 05:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → LAND SUPPLY CHAIN

Contacts1 person available

OfficeUSA

Organization / Agency

Department Of Defense → LAND SUPPLY CHAIN

View Agency Profile

Office AddressUSA

Contacts

SAMANTHA DEARDEN

contact@example.gov

+1 (555) 000-0000

Full Description

HOUSING ASSY,DRIVE
HOUSING ASSEMBLY, DRIVE.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RD002, COVERED DEFENSE INFORMATION APPLIES
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RD001: DEMILITARIZATION: SMALL ARMS WEAPONS AND PARTS AND ACCESSORIES
(CATEGORY I MUNITIONS LIST ITEMS, CATEGORY I-DODM 4160.28-VOL.3)
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
RC001: DOCUMENTATION REQUIREMENTS FOR SOURCE APPROVAL REQUEST (SAR)
RQ002: CONFIGURATION CHANGE MANAGEMENT ENGINEERING CHANGE PROPOSAL
REQUEST FOR VARIANCE (DEVIATION OR WAIVER)
THIS ITEM IS A "DEFENSE ARTICLE" AS DEFINED IN AND SUBJECT TO THE
INTERNATIONAL TRAFFIC IN ARMS REGULATIONS (22 C.F.R. 120-30) AND THE
ARMS EXPORT CONTROL ACT (22 U.S.C.A. 2778-2799). ANY MANUFACTURER OR
EXPORTER OF DEFENSE ARTICLES IS REQUIRED TO REGISTER WITH THE
DIRECTORATE OF DEFENSE TRADE CONTROLS (DDTC), DEPARTMENT OF STATE.
DOCUMENTARY EVIDENCE OF REGISTRATION MAY BE REQUIRED PRIOR TO AWARD.
ADDITIONAL EXPORT RESTRICTIONS APPLY AS INDICATED HEREIN. FAILURE TO
SUBMIT DDTC REGISTRATION WHEN REQUESTED WILL MAKE A QUOTE/OFFER
INELIGIBLE FOR AWARD.
The Government Procuring Activity has determined that Surplus is not Acceptable for this NSN. (End of TQ Requirement)
A metal casting process was identified as a means to manufacture this item. Tooling is required to produce a casting. For sourcing, tooling,
SPE7L1-26-T-739F
SECTION B
materials or other information, please contact the appropriate assistance team: (Aviation, C<(>&<)>E Supply Chains) https://www.dla.mil/Aviation/Offers/Engineering/Forging-and-Casting/; (Land & Maritime Supply Chains) DSCC.cast.forge@dla.mil. RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment ADEQUATE DATA FOR THE NSN/Part Number: 1005-00-450-7291 Quantity: 8 EA Purchase Request: 7017237280QTY: 8 Delivery: 165 days ADO