Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

HOUSING, MECHANICAL DRI

Active
SPE7L1-26-T-888ZFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the procurement of one unit of a mechanical drive housing with NSN 3040-01-378-6712 and part number 278.06.022.01 from Dana Off Highway Products, LLC. Delivery is required within five days of award, FOB origin, with no tolerance for quantity variance. Inspection and acceptance both occur at the destination facility located at Fort Irwin, California. All packaging must comply with ASTM D3951 and MIL-STD-129, and palletization must adhere to DLA’s Packaging Requirements for Procurement, with the DLA Master List of Technical and Quality Requirements taking precedence over any conflicting standards. Ozone-depleting chemicals are strictly prohibited, and any substitute materials must be approved unless explicitly authorized by the specification. The item must be shipped via traceable means, excluding parcel post, with required markings and identifiers including the RDD code, project code TP1, and government-specific codes for tracking and disposition. The solicitation number is SPE7L1-26-T-888Z, issued under a federal procurement initiative by the Department of Defense’s Land Supply Chain. The response deadline is August 10, 2026, with a posted date of July 29, 2026. The unit of issue is each, and the contract specifies the delivery destination, shipping address, and mark-for details as identical for clarity and logistics accuracy. The primary point of contact is Kristina Derry at the Defense Logistics Agency. The NAICS code 332911 categorizes the procurement under other fabricating operations, and all documentation must align with DLA systems and ANSI X12 unit conversions where applicable. Government-only fields include procurement identifiers, distribution codes, and required shipment advisories, ensuring traceability and compliance with military supply chain protocols.

General Info

Procure one mechanical drive housing, deliver in five days to Fort Irwin, comply with military packaging and traceability standards.

Agency

Department Of Defense → LAND SUPPLY CHAINView Agency

NAICS

332911 - Industrial Valve ManufacturingView NAICS

Place of Performance

DEPOT ST REC WHSE BLDG 860, FORT IRWIN, CA, 92310-9986, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → LAND SUPPLY CHAIN
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → LAND SUPPLY CHAIN
View Agency Profile
Office AddressUS
Contacts
Kristina Derry
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
HOUSING,MECHANICAL DRIVE
HOUSING, MECHANICAL
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE
USED NOR INCORPORATED IN ANY ITEMS TO BE
DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION
SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT
DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS.
SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR
APPROVAL UNLESS THEY ARE AUTHORIZED BY THE
SPECIFICATION REQUIREMENTS.
DANA OFF HIGHWAY PRODUCTS, LLC 77237 P/N 278.06.022.01
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017659305 0001 EA 1.000
NSN/MATERIAL:3040013786712
DELIVERY (IN DAYS):0005
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
SPE7L1-26-T-888Z
SECTION B
PR: 7017659305 PRLI: 0001 CONT’D
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
BULK BREAK POINT:
W80QJK
W6F7 SUP DIV DSSA CLASS IX
AWCF SSF
DEPOT ST REC WHSE BLDG 860
FORT IRWIN CA 92310-9986
US
RDD(3-POS RDD)/NMCS SHIPMENT. SHIP BY FASTAST TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
W80QJK
W6F7 SUP DIV DSSA CLASS IX
AWCF SSF
DEPOT ST REC WHSE BLDG 860
FORT IRWIN CA 92310-9986
US
MARKFOR
W80QJK
W6F7 SUP DIV DSSA CLASS IX
AWCF SSF
DEPOT ST REC WHSE BLDG 860
FORT IRWIN CA 92310-9986
US
M/F: (TCN) W80QJK62050135
RDD: N
PROJ: TP 1
SUPP ADD: W9046W SIG: C
FOR GOVERNMENT USE ONLY: (IPD) 02
DIC: A0A DIST: V ADV: FC: Z9
Need Ship Date:00/00/0000 Original Required Delivery Date:07/30/2026
SPE7L1-26-T-888Z NSN/Part Number: 3040-01-378-6712 Quantity: 1 EA Purchase Request: 7017659305QTY: 1 Delivery: 5 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332911
New
DIBBS
SUBPLATE ASSEMBLY, V
Solicitation # SPE7MC-26-T-158M
The contract is for the procurement of two units of the SUBPLATE ASSEMBLY, V with NSN 4820-01-410-7974 and part number 211059730, sourced from SARGENT AEROSPACE & DEFENSE, LLC under solicitation SPE7MC-26-T-158M. Delivery is required within 147 days of contract award with FOB origin terms, and the items must be delivered to the DLA Distribution facility in New Cumberland, Pennsylvania. The unit of issue is each, with a total price of $2.00 per unit and no quantity variance permitted. All supplies must comply with DLA packaging requirements based on MIL-STD-2073-1E and MIL-STD-129 marking standards, with no special marking required. Packaging must include a primary method of preservation AE, dry climate control, and use of D3 unit containers within intermediate containers labeled as DO. The item is designated as a critical application item and is subject to technical and quality requirements referenced from the DLA Master List, including strict prohibitions against intentional use of mercury or mercury-containing compounds except for specific exempted applications like batteries, fluorescent lights, instrument sensors, weapon systems, or authorized chemical reagents. Portable devices containing mercury must meet shock-proof standards and include a secondary containment barrier per NAVSEA 5100-003D. The contract does not require Level 1/Subsafe compliance. The original required delivery date is March 4, 2027, with a need ship date of January 5, 2027, and the solicitation was posted on July 29, 2026, with responses due by August 10, 2026. The contracting office is the DLA Distribution Center, and the point of contact is Paula McClary.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 18 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332911
New
DIBBS
VALVE, SAFETY RELIEF
Solicitation # SPE7MC-26-T-158J
A safety relief valve is being procured under contract SPE7MC-26-T-158J by the Defense Logistics Agency for delivery to the USS BOXER LHD 4 at FPO AP 96661, with a required delivery date of July 27, 2026. The contract specifies two identical items, each priced at $1.00, with no variance allowed in quantity, and delivery must be made FOB destination within 20 days. The valve has a carbon steel body with flanged end connections and must comply with strict environmental and safety standards, including a complete prohibition on ozone-depleting chemicals and any intentional addition of mercury or mercury-containing compounds, except where explicitly permitted for functional uses in batteries, instruments, or weapon systems as defined by NAVSEA, with additional containment requirements for portable devices. Packaging must follow MIL-STD-2073-1E and MIL-STD-129 for marking, with palletization adhering to DLA’s packaging requirements, and all materials must be properly identified using the assigned NSN 4820013387425. The contract references the DLA Master List of Technical and Quality Requirements, which governs all technical and quality specifications, and the procurement is a total small business set-aside under NAICS code 332911, with submissions directed to DLA and managed via the DIBBS system.
Defense Logistics Agency

POSTED

about 18 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332911
New
DIBBS
VALVE, SAFETY RELIEF
Solicitation # SPE7MC-26-T-158N
The contract is for the procurement of five safety relief valves identified by NSN 4820013106508 and part number BASAA05SEE from DANTE VALVE COMPANY, with a total contract value of $5.00 per unit, delivered FOB origin within 70 days of the required delivery date of December 8, 2026. The item is classified as a critical application component, necessitating strict adherence to technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, and packaging must comply with MIL-STD-2073-1E and MIL-STD-129 for marking and unit packaging. Mercury and mercury-containing compounds are strictly prohibited in or on the hardware except in specific exempted applications such as functional batteries, fluorescent lamps, sensors, or weapon systems, and any permitted mercury-containing portable lamps or instruments must include a second barrier of containment per NAVSEA 5100-003D. The contract requires compliance with DLA packaging and shipping procedures, including parcel post and freight shipping to the DDSP New Cumberland Facility in Pennsylvania, with no variance allowed in quantity. Tooling may be required for manufacturing and suppliers are directed to submit a Casting and Forging Assistance Request if needed. The solicitation was issued on July 29, 2026, with responses due by August 10, 2026, under solicitation number SPE7MC-26-T-158N, and delivery must be completed by the specified timeline without exception.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 18 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332911
New
DIBBS
VALVE, REGULATING, FL
Solicitation # SPE7MC-26-T-158L
The contract is for the procurement of six units of a regulating fluid valve with NSN 4820-01-564-5211, issued under solicitation SPE7MC-26-T-158L, a total small business set-aside under NAICS code 332911. The item is designated as a critical application component, with strict compliance required to the DLA Master List of Technical and Quality Requirements, which override any referenced ASTM D3951 standards. Packaging and labeling must strictly follow MIL-STD-129, with palletization aligned to RP001 DLA Packaging Requirements. The contract includes two CLINs: one for six units at $6.00 each to be delivered to Cherry Point, NC, and another for eight units at $8.00 each to be delivered to Jacksonville, FL. Both deliveries are FOB origin, require 218 days for delivery, and have zero variance allowance. Inspection and acceptance occur at destination, with no tolerance for deviation in quantity. The original required delivery date is March 28, 2027, with ship dates mandated for May 26, 2027, and March 17, 2027, respectively. All packaging must meet specified QUP and U/I standards, and transportation instructions reference DLAD Proc Notes C19 and C20. The point of contact is Paula McClary, and the solicitation was posted July 29, 2026, with a response deadline of August 10, 2026.
CHERRY POINT PHANTOM RD BLDG

POSTED

about 18 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332911
New
DIBBS
TRANSDUCER, SERVOVAL
Solicitation # SPE7M1-26-T-238D
This contract pertains to the procurement of a transducer, servovalve identified by NSN 4810-01-153-8090, with a quantity of six units to be delivered within 70 days under solicitation SPE7M1-26-T-238D. The item is classified as a critical application component and must comply with stringent technical and quality requirements referenced from the DLA Master List, including tailored higher-level quality standards, configuration change management protocols, and inspection and acceptance procedures conducted at origin. Packaging must adhere to MIL-STD-2073-1E with specific methods for preservation, wrapping, and containment, while marking follows MIL-STD-129 without special codes, and palletization aligns with DLA packaging guidelines. Delivery is FOB origin to the specified warehouse in Tracy, California, with no variance allowed in quantity. The contract prohibits intentional inclusion of mercury or mercury-containing compounds except in specified functional applications such as batteries, instruments, or Navy-controlled systems, with additional containment requirements for portable devices as per NAVSEA 5100-003D. Sampling for acceptance follows MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated, and attributes are assigned verification levels of VII, IV, and II for critical, major, and minor characteristics respectively. The contract specifies that unit identification is not required, and transportation logistics are governed by DLA procedural notes C19 and C20. The required delivery date is December 4, 2027, though an earlier ship date of October 20, 2026, has been indicated. The point of contact for inquiries is Sara Wilson of the Department of Defense, Maritime Supply Chain.
MARITIME SUPPLY CHAIN

POSTED

about 18 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332911
New
DIBBS
GAGE, PRESSURE, DIAL IND
Solicitation # SPE4A5-26-Q-0655
The contract pertains to the procurement of 13 units of a pressure dial indicating gage with NSN 6685-01-539-5318 under solicitation SPE4A5-26-Q-0655, with a firm fixed price and zero tolerance for quantity variance. Delivery is required within 52 days after award, with inspection and acceptance occurring at the destination. Packaging must comply with DLA’s RP001 requirements, adhering to MIL-STD-129 for marking and labeling, and ASTM D3951 for commercial packaging unless the item is classified hazardous under FED-STD-313, in which case TQ requirement IP025 applies. The DLA Master List of Technical and Quality Requirements governs all technical and quality standards, superseding other specifications. Sampling must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and attribute verification levels are fixed at VII, IV, and II for critical, major, and minor characteristics respectively. Palletization must conform to RP001, and unit of issue is specified as each. The item must be shipped to the DLA Distribution facility in New Cumberland, Pennsylvania, with transportation protocols aligned to DLAD PROC NOTE C19 and C20. The procurement is for a federal customer with a material need date of February 20, 2026.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 18 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332911
New
DIBBS
VALVE, ANGLE
Solicitation # SPE7M1-26-Q-1281
The contract pertains to the procurement of eight angle valves identified by NSN 4820-01-419-6362 under solicitation number SPE7M1-26-Q-1281, issued by the Defense Logistics Agency on behalf of the Department of Defense. The solicitation was posted on July 29, 2026, with a response deadline of August 13, 2026, indicating a standard competitive procurement process open to qualified vendors. The item is classified under a federal procurement framework with no specific set-aside designation, meaning it is open to all eligible contractors without preference restrictions. The place of performance and delivery location are not specified, but the contracting activity is centered within the United States under the oversight of the Defense Logistics Agency. All inquiries and submissions must be made through the official DIBBS platform linked in the solicitation details.
Defense Logistics Agency

POSTED

about 18 hours ago

DEADLINE

in 14 days
View Details
NAICS: 332911
New
DIBBS
VALVE, BALL
Solicitation # SPE7MC-26-T-158K
This contract is for the procurement of 69 ball valves with a NSN of 4820-01-365-2866 and part number 022-08266B002, supplied by JOHNSON CONTROLS NAVY SYSTEMS, LLC. The valves are rated for 38 inch O.D.S. and 1000 PSI and are designated as a critical application item. Strict prohibitions apply to the intentional use of mercury or mercury-containing compounds in the valve itself or in any contact with the hardware, except for specific exceptions such as batteries, fluorescent lights, sensors, weapon systems, or chemical reagents authorized by NAVSEA; portable devices containing mercury must have shock-proof construction and a secondary containment boundary as per NAVSEA 5100-003D. Class I ozone depleting chemicals are entirely banned from use in the product or any associated materials. Packaging and preservation must adhere to MIL-STD-2073-1E and MIL-STD-129, with no mercury permitted in any preservation, packaging, packing, or marking materials. The contract requires delivery FOB origin within 161 days, with zero variance allowed in quantity, and inspection and acceptance occur at the destination. Delivery is to the DLA Distribution facility at New Cumberland, Pennsylvania. The unit price is $69.00 per unit, with a total contract value of $4,761. The solicitation was issued on July 29, 2026, with responses due by August 10, 2026, and the original required delivery date is December 18, 2027, though a need ship date is listed as January 19, 2027. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, and the unit of issue is the individual unit as defined by DoD standards.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 18 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332911
New
DIBBS
PARTS KIT, VALVE
Solicitation # SPE7MC-26-T-158H
The contract pertains to a Parts Kit, Valve with NSN 4820016954462 and purchase request number 7017659148, requiring one kit to be delivered within 20 days FOB destination with no tolerance for quantity variance. The item must comply with MIL-STD-2073-1E for packaging, specifically Appendix D for kits, and meet DLA’s packaging requirements as defined in RP001, with marking per MIL-STD-129. Preservation and packaging methods are designated with generic codes indicating no specified materials or methods. The delivery location is the USNS PILILAAU T AKR 304 at FPO AP 96675, with transportation governed by DLAD Proc Notes C19 and C20, and vendor shipment instructions require use of VSM. The special marking code is ZZ, indicating no additional special requirements beyond standard documentation. The contract is issued under solicitation SPE7MC-26-T-158H with a response deadline of August 10, 2026, and an original required delivery date of July 27, 2026. Technical and quality requirements referenced via R or I numbers are controlled by the DLA Master List, with applicability based on acquisition size and amendment dates. The unit of issue is KT, and the contract falls under NAICS code 332911 with the Defense Logistics Agency as the contracting authority.
Defense Logistics Agency

POSTED

about 18 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332911
New
DIBBS
SEAT, VALVE
Solicitation # SPE7M4-26-T-291H
The contract is for one seat valve, identified by NSN 4820-01-029-2783 and part number 6016038-003, to be supplied under solicitation SPE7M4-26-T-291H with a delivery requirement of 182 days from the contract award date, set for delivery FOB origin. The item is classified as a critical application component and must comply with stringent DLA packaging and quality standards, including MIL-STD-2073-1E packaging and MIL-STD-129 marking, with no exceptions to the quantity variance of plus or minus zero percent. The delivery destination is the DLA Distribution facility in New Cumberland, Pennsylvania, with no special marking required beyond standard requirements. The contract strictly prohibits the intentional addition of mercury or mercury-containing compounds to the hardware, with limited exceptions for functional uses in specified instruments, batteries, or weapon systems as defined by NAVSEA, and requires secondary containment for any portable devices containing mercury in compliance with NAVSEA 5100-003D. Technical and quality specifications are governed by the DLA Master List of Technical and Quality Requirements referenced at the DLA website, with revisions controlled by the solicitation issue date. The contract includes transportation directives under DLAD Proc Note C19 and C20, with the supplier required to meet the need ship date of February 3, 2026, and original required delivery date of November 4, 2026. The point of contact for inquiries is Freddie Vazquez of the DLA Fluid Handling Division.
FLUID HANDLING DIVISION

POSTED

about 18 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332911
New
Federal
Check Valve SupplyThe contract seeks the supply of a check valve with NSN 4730-01-546-8848 for use in fluid control systems, under a subcontract classified as a Small Business Set Aside - Total, reserved exclusively for small businesses as defined by the SBA. The North American Industry Classification System code 332911 applies, indicating the work involves the manufacture of other fabricated metal products, specifically related to valve production. The solicitation was posted on July 29, 2026, with a firm response deadline of August 4, 2026, at 7:00 PM. The contracting activity is managed by the Naval Supply Systems Command Fleet Logistics Center Puget Sound under the Department of Defense, though specific performance location and point of contact details are not provided. Interested parties must submit proposals through the official SAM.gov portal before the deadline to be considered for award.
Navsup Flt Logistics Ctr Puget Sound

POSTED

about 23 hours ago

DEADLINE

in 5 days
View Details
NAICS: 332911
New
Federal
Head & Disk, Safety, Pressure Relief
Solicitation # SPE7MX26RX052
The contract solicits a Head & Disk, Safety, Pressure Relief Valve with NSN 4820-14-540-0694 under a Firm-Fixed Price Indefinite Delivery Contract using FAR Part 12.201 procedures, treating the item as commercial. The estimated annual demand is 416 units, and the North American Industry Classification System code is 332911 with a size standard of 750 employees. The solicitation is unrestricted, with FOB origin and delivery to destination, and the Trade Agreement Act applies. Required delivery is within 155 days of the issuance of a delivery order, with no shipments permitted prior to the DD Form 1155. The only approved source is CAGE F5137 Safran Landing Systems with part number GA31866. Offers must be submitted via the DIBBS system using a scanned SF1449 form or by email to Karin.wilson@dla.mil, and all submissions must be in English and in U.S. dollars. Evaluation will consider price, delivery, and performance, not price alone. The solicitation issued on or about August 10, 2026, with responses due on or about September 9, 2026, although the posted response deadline in the data is August 5, 2026, indicating a possible discrepancy. The contracting office is located in Columbus, Ohio, under the Department of Defense’s DLA Land and Maritime, and hard copies are not available.
DLA Land And Maritime

POSTED

about 23 hours ago

DEADLINE

in 6 days
View Details

More opportunities from Department Of Defense → LAND SUPPLY CHAIN

Same awarding agency

NAICS: 541512
New
DIBBS
Cybersecurity Compliance and CUI SafeguardingThe contract requires the implementation and ongoing maintenance of NIST SP 800-171 Revision 2 controls to safeguard Controlled Unclassified Information within the contractor’s systems and environments. This includes establishing technical, administrative, and physical safeguards to ensure the confidentiality, integrity, and availability of CUI in alignment with federal cybersecurity standards. The contractor must also comply with incident reporting requirements mandated by DFARS 252.204-7012, ensuring timely notification and remediation of any cybersecurity events affecting CUI. All activities must be performed under a Total Small Business Set-Aside, reserved exclusively for small businesses as defined by the SBA, and the work is classified under NAICS code 541512 for Computer Systems Design Services. The contract is structured as a subcontract and is associated with the Department of Defense’s Land Supply Chain organization. Responses must be submitted by the deadline of August 28, 2026, with the expectation that performance will occur within the defense supply chain environment.
Computer Systems Design Services

POSTED

about 18 hours ago

DEADLINE

in 29 days
View Details
NAICS: 541380
New
DIBBS
Quality Inspection and Testing ServicesThe contract requires independent inspection and testing of heater assemblies and components to ensure full compliance with specified technical drawings, MIL-STD-1916 standards, and a zero non-conformance mandate. All work must be performed with rigorous attention to quality control, ensuring that every part meets exacting military specifications without deviation. The services are critical to maintaining the integrity and reliability of defense-related heating systems. This is a total small business set-aside subcontract under NAICS code 541380, exclusively available to small business concerns as defined by the SBA. The solicitation was posted on July 29, 2026, with a response deadline of August 28, 2026. The contracting activity stems from the Department of Defense through the Land Supply Chain office, and performance is expected to support U.S. military operations. All proposals must demonstrate proven capability to deliver defect-free inspection and testing outcomes in alignment with stringent defense quality requirements.
Testing Laboratories and Services

POSTED

about 18 hours ago

DEADLINE

in 29 days
View Details
NAICS: 561910
New
DIBBS
Packaging, Preservation, and Corrosion ControlThe contract requires comprehensive military-compliant packaging, corrosion prevention, and moisture control measures for a heater parts kit, ensuring all components are protected during storage and transit under demanding operational conditions. All packaging must meet strict defense standards with proper labeling and full documentation to guarantee traceability, readiness, and compliance with military logistics protocols. The scope encompasses every step from initial preservation techniques to final packaging and recordkeeping, with an emphasis on long-term durability and environmental resilience. This is a total small business set-aside subcontract under NAICS code 561910, issued by the Department of Defense’s Land Supply Chain, and is open for response until August 28, 2026. The solicitation is exclusively available to small businesses as defined by the Small Business Administration, and the place of performance and exact delivery location are not specified in the provided details. All work must align with federal acquisition regulations and military-grade specifications, with no flexibility in adherence to preservation and packaging standards.
Packaging and Labeling Services

POSTED

about 18 hours ago

DEADLINE

in 29 days
View Details
NAICS: 335999
New
DIBBS
Component Supply for Heater AssemblyThe contract seeks the supply of critical components including heating elements, thermostats, housings, and electrical connectors specifically designed to meet military specifications and stringent quality standards for integration into heater assemblies. All materials must adhere to defined technical requirements and undergo rigorous testing to ensure reliability under demanding operational conditions. The procurement is structured as a subcontract under a Total Small Business Set-Aside, reserved exclusively for small businesses as defined by the Small Business Administration, with the NAICS code 335999 designating it under Other Electrical Equipment and Component Manufacturing. The solicitation was posted on July 29, 2026, and responses are due by August 28, 2026, with performance expected to support the Department of Defense’s Land Supply Chain through undisclosed but mission-critical locations. Compliance with federal acquisition regulations and defense-specific quality protocols is mandatory, and all suppliers must be certified to handle sensitive military-grade components under controlled manufacturing practices.
All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 29 days
View Details
NAICS: 333414
New
DIBBS
Manufacture of Vehicular Compartment Heater Parts KitThe contract requires full manufacturing, assembly, testing, and packaging of the vehicular compartment heater parts kit designated by NSN 2540-01-096-5023, strictly in accordance with military specifications and source control drawings. All work must be performed to meet rigorous defense standards, ensuring the component’s reliability and performance under operational conditions. The solicitation is structured as a subcontract under a Total Small Business Set-Aside, meaning only small businesses certified by the Small Business Administration are eligible to respond, reinforcing the Department of Defense’s commitment to supporting small business participation in defense supply chains. The project falls under NAICS code 333414, which classifies it within the heating equipment manufacturing sector, and is managed by the Land Supply Chain division of the Department of Defense. The opportunity was posted on July 29, 2026, with a response deadline of August 28, 2026, providing potential bidders a four-week window to prepare and submit proposals. The place of performance and point of contact details are not specified, but the primary location of work is expected to align with the contractor’s facility capable of meeting military-grade production requirements. All submissions must be made through the official DIBBS platform, and compliance with all technical, quality, and regulatory standards is mandatory for award consideration.
Heating Equipment (except Warm Air Furnaces) Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 29 days
View Details
NAICS: 333999
New
DIBBS
Small Business Subcontracting Participation (Socioeconomic Support)Small businesses are invited to participate in subcontracting opportunities to support a prime contractor’s socioeconomic evaluation score under a Department of Defense solicitation tied to NAICS code 333999. This subcontracting initiative is designed to enhance the prime contractor’s standing in federal socioeconomic assessments by integrating qualified small businesses into the supply chain, though no specific set-aside designation is applied. The opportunity was posted on July 29, 2026, with responses required by August 27, 2026, and is managed by the Land Supply Chain organization under the Office of the Secretary of Defense. While no place of performance or point of contact details are specified, interested small businesses must engage directly through the provided DIBBS portal to pursue participation and align with the prime contractor’s subcontracting goals. The effort does not involve a formal contract award but rather enables small firms to contribute to a larger bid’s compliance and competitiveness through verified subcontracting commitments.
All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 28 days
View Details
NAICS: 484220
New
DIBBS
Logistics and Domestic Freight Shipping (FOB Origin)The contract pertains to the arrangement and execution of domestic freight shipping services from various points of origin within the United States to DLA Distribution New Cumberland, Pennsylvania, under FOB origin terms, meaning the responsibility for the shipment transfers to the buyer upon delivery to the carrier at the origin. This is a subcontract solicitation under the NAICS code 484220, which categorizes it within the truck transportation sector, specifically for general freight and local hauling. The opportunity is posted by the Department of Defense through its Land Supply Chain office, indicating that the work supports military logistics and supply chain operations. The response deadline is set for August 27, 2026, and the solicitation is available via a public portal for interested parties to review and submit proposals. There is no specific set-aside designation listed, suggesting the contract is open to all qualified contractors, regardless of business size or certification status. Performance is required solely within the U.S., with the final destination fixed at New Cumberland, PA, and no additional point of contact details are provided in the posting.
Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 18 hours ago

DEADLINE

in 28 days
View Details
NAICS: 493190
New
DIBBS
Packaging, Preservation, and Marking ServicesThe contract requires the provision of packaging, preservation, and marking services for cylinder assemblies in full compliance with DLA RP001, MIL-STD-2073-1E, and MIL-STD-129 standards, ensuring all components meet rigorous military specification for handling, storage, and transportation. All work must adhere strictly to these technical guidelines to guarantee the integrity and traceability of the assemblies throughout the supply chain, with particular attention to labeling, protective materials, environmental preservation, and unit identification. This is a subcontract opportunity issued by the Department of Defense under the LAND SUPPLY CHAIN organization, with a solicitation posted on July 29, 2026, and a mandatory response deadline of August 27, 2026. The North American Industry Classification System code 493190 indicates the focus on warehousing and storage services, though the specific scope centers on specialized military packaging activities. The place of performance and point of contact details are unspecified, but the contract is accessible via the DIBBS platform for interested parties to review full requirements and submit proposals.
Other Warehousing and Storage

POSTED

about 18 hours ago

DEADLINE

in 28 days
View Details
NAICS: 333999
New
DIBBS
Supply of Cylinder Assembly, Actuating, Linear (NSN 3040-01-642-5340)The contract seeks the procurement and delivery of 154 new, unused Cylinder Assembly, Actuating, Linear units identified by NSN 3040-01-642-5340, with the potential to expand to a maximum of 308 units if required. All units must fully comply with military specifications and meet stringent packaging standards to ensure readiness for deployment. The solicitation is issued under the NAICS code 333999 and is structured as a subcontract within the Department of Defense’s Land Supply Chain. Responses are due by August 27, 2026, with the opportunity formally posted on July 29, 2026. The place of performance and specific delivery location are not detailed in the available data, and no set-aside provisions or small business preferences are indicated. The contract is administered by the Department of Defense through its DLA DIBBS portal, with no direct point of contact listed for inquiries.
All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 28 days
View Details
NAICS: 332994
New
DIBBS
SPROCKET, AMMUNITION
Solicitation # SPE7L1-26-T-889H
The contract pertains to the procurement of 25 units of sprocket ammunition, identified by NSN 1005-01-559-3126 and part number 157D3853, under solicitation SPE7L1-26-T-889H. Delivery is required within five days of award, with shipment FOB origin and no tolerance for quantity variance. Inspection and acceptance occur at the origin point, and packaging must comply with MIL-STD-2073-1E and DLA packaging requirements, including marking per MIL-STD-129 without special markings. The item is subject to demilitarization guidelines for Category I munitions and must adhere to cybersecurity requirements under CMMC Level 2 Self-Assessment. The contract also applies covered defense information protocols, and all technical and quality requirements are sourced from the DLA Master List, with revisions controlled by the solicitation issue or award date. The designated delivery location is in Bogotá, Colombia, with specific transportation and customs procedures outlined for freight and parcel post. This is a total small business set-aside under NAICS code 332994, with a response deadline of August 10, 2026, and an original required delivery date of August 3, 2026. The point of contact is Deborah Ferrin, and the contracting activity is under the Department of Defense's Land Supply Chain.
Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333612
New
DIBBS
GEAR, SPUR
Solicitation # SPE7L1-26-T-889Q
The contract pertains to the procurement of a spur gear identified by NSN 3020-01-558-2772 and part number 157D3839, with a quantity of 13 units to be delivered within five days of contract award under solicitation SPE7L1-26-T-889Q. Delivery is FOB origin, with no tolerance for variance in quantity, and both inspection and acceptance occur at the point of origin. Packaging must comply with MIL-STD-2073-1E, including specific preservation methods, container types, and packing levels, while labeling follows MIL-STD-129 with no special marking required. Palletization adheres to DLA packaging standards, and the shipment is addressed to a customs deposit facility in Bogotá, Colombia, with transportation governed by DLA procedural notes C19 and C20. The item is subject to DLA’s Master List of Technical and Quality Requirements, and the supplier must perform a CMMC Level 2 self-assessment to verify cybersecurity readiness. The acquisition is a total small business set-aside under NAICS code 333612, with a contract value of $169.00 at $13.00 per unit, and the required delivery date is August 3, 2026. The contract is managed by the Department of Defense’s Land Supply Chain under the supervision of Kristina Derry, with full compliance enforced through government oversight codes and tracking identifiers.
Speed Changer, Industrial High-Speed Drive, and Gear Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 11 days
View Details
NAICS: 336411
New
DIBBS
GASKET
Solicitation # SPE7L1-26-T-888H
The contract pertains to the procurement of five gaskets identified by NSN 5330-00-090-4690 under solicitation SPE7L1-26-T-888H, with a required delivery within five days of award. Technical and quality requirements governing this item are referenced from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. Packaging must comply with DLA standards, and any non-accepted supplies must have government identification removed prior to return. The gasket must be free of asbestos as defined in FED-STD-313, and no mercury or mercury-containing compounds may be intentionally added or come into direct contact with the item, except for specific functional uses in batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or NAVSEA-specified chemical reagents. Portable fluorescent lamps or instruments containing mercury must be shock-proof and include a secondary containment barrier, in accordance with NAVSEA 5100-003D. The solicitation was posted on July 29, 2026, with responses due by August 10, 2026, and is managed by the Department of Defense’s Land Supply Chain under NAICS code 336411. Primary point of contact is Kristina Derry at kristina.derry@dla.mil or 614-692-0158.
Aircraft Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 11 days
View Details