This Solicitation opportunity from Department Of Defense was posted on August 5, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

HOUSING, MECHANICAL DRI

Closed

SPE7L3-26-T-148YFederal

Submission Closed08/17/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

Solicitation # SPE7M5-27-T-1044

Solicitation SPE7M5-27-T-1044, issued by the DLA Weapons Support Active Devices Division, is a request for quotations for the procurement of 74 electrical solenoids under NSN 5945-01-369-0705. The procurement falls under NAICS code 333612. Delivery is required within 112 days after order, with a need ship date of February 16, 2027, and a final required delivery date of August 4, 2027. The items are to be delivered FOB Origin to New Cumberland, Pennsylvania. Inspection and acceptance will occur at the destination. The contract mandates strict adherence to technical and quality requirements found in the DLA Master List, as well as specific packaging and marking standards including MIL-STD-2073-1E and MIL-STD-129. Additionally, component lead finish markings must comply with IPC/JEDEC J-STD-609. Offerors must submit quotes via the DIBBS system by October 26, 2026. Payment will be processed electronically through the Wide Area WorkFlow system. Key regulatory compliance includes the Buy American and Balance of Payments Program, NIST SP 800-171 assessment requirements, and prohibitions on covered defense telecommunications equipment.

DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

DEADLINE

Solicitation # SPE4A1-27-T-0168

Solicitation SPE4A1-27-T-0168 is a fixed-price procurement issued by the DLA Weapons Support Aviation Supply Chain for six electrical solenids, identified by NSN 5945-00-614-3978 and Parker Hannifin Corporation part number 1471-559374. The items are designated as critical application items and must be delivered FOB Origin to the DLA Distribution Depot at Hill AFB, Utah. The required delivery date is November 18, 2027, with a need ship date of April 13, 2027, and a delivery lead time of 167 days. Inspection and acceptance will occur at the destination per FAR 52.246-2. The contract mandates strict quality and environmental compliance, requiring manufacturers to adhere to ISO 9001:2015 or an equivalent standard. Sampling must follow MIL-STD-1916 or ASQ H1331, with specific AQLs for critical, major, and minor attributes. Prohibitions are in place regarding the use of Class I ozone-depleting substances and the intentional addition of mercury. Packaging and marking must comply with MIL-STD-2073-1E, MIL-STD-129, and DLA packaging requirements RP001. Administrative requirements include the use of the Wide Area WorkFlow (WAWF) system for electronic invoicing and adherence to DFARS cybersecurity and domestic sourcing regulations, including the Buy American Act and the Berry Amendment.

DLA WEAPONS SUPPORT AVIATION SUPPLY CHAIN

POSTED

DEADLINE

Solicitation # SPE7L4-27-T-0659

DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT

POSTED

DEADLINE

Solicitation # SPE7L5-27-T-0419

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS ENGINES

POSTED

DEADLINE

Solicitation # SPE7LX-27-U-0363

DLA WEAPONS SUPPORT STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

DEADLINE

COUPLING, SHAFT, RIGI

Solicitation # SPE4A5-27-T-2008

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

CONNECTING LINK, RIGID

Solicitation # SPE4A5-27-T-1989

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

Solicitation # SPE7L4-27-T-0677

DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT

POSTED

DEADLINE

Solicitation # SPE7L1-27-U-0146

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

Supply of Pressure Bellows (NSN 3010-011227902)This subcontract through DLA Weapons Support involves the manufacture or distribution of 99 specialized pressure bellows meeting NSN 3010-011227902 specifications. The items are intended for prime contractors supporting DLA Land and Maritime supply contracts. All deliverables must strictly adhere to MIL-STD-2073-1E for packaging and MIL-STD-129 for markings. To be eligible, providers must maintain an active SAM.gov registration and hold EJCP certification and NIST compliance. The opportunity is categorized under NAICS code 333612, with a response deadline set for November 4, 2026.

POSTED

DEADLINE

Solicitation # 7018497089

DLA Weapons Support in Columbus is conducting market research for the procurement of 99 units of Pressure Bellows under NSN 3010-011227902. This sources-sought effort, identified by solicitation number 7018497089, aims to identify capable manufacturers or distributors for a future firm fixed-price contract. Currently approved sources include Unison Industries, LLC and General Electric Company. The agency is seeking information on estimated unit pricing, standard delivery timelines, and the ability to meet technical requirements including EJCP and NIST standards, as well as packaging and marking specifications MIL-STD-2073-1E and MIL-STD-129. Interested parties must be registered in the System for Award Management with the applicable NAICS code 333612. The government is evaluating the potential for a 100 percent quantity option and is open to pricing based on Economic Price Adjustments using the Producer Price Index. Companies wishing to become approved sources may submit an application through the DLA Land and Maritime Alternate Offer/Source Approval Request program. Responses to this market survey must be submitted to Danielle Jilton by the specified deadline.

POSTED

DEADLINE

Solicitation # SPE7M1-27-T-1650

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 20 hours ago

DEADLINE

in 9 days

AI Contract Overview

The contract pertains to the procurement of a Housing, Mechanical Drive, designated as a critical application item with a NSN of 3040-00-996-0716, requiring the manufacture of 337 units under a Service-Disabled Veteran-Owned Small Business Set-Aside. The item must be produced via a metal casting process, with tooling required for casting operations, and technical requirements are defined by TDP Rev B Gen 2 aligned with multiple drawing and quality assurance provisions dated between 1989 and 2026, including a primary drawing revision H dated April 17, 2024. Quality assurance mandates adherence to ISO 9001:2015 or an equivalent standard, with inspection and acceptance performed at origin per FAR 52.246-2, employing MIL-STD-1916 or ASQ H1331 Table 1 sampling methods requiring zero non-conformances for acceptance, and assigning verification levels VII, IV, and II for critical, major, and minor attributes respectively. Phosphate coating must be performed by certified suppliers, and component sourcing must comply with Qualified Products Lists or Qualified Manufacturers Lists as specified. The use of Class I ozone-depleting chemicals is strictly prohibited, and substitute chemicals require prior approval unless explicitly authorized by specifications. Cybersecurity requirements include CMMC Level 2 self-assessment, safeguarding covered defense information per DFARS 252.204-7012, and compliance with NIST SP 800-171 DOD assessment requirements under a deviation. The offeror must represent it will not provide covered telecommunications equipment and must maintain current SAM registrations. Additive manufacturing is prohibited unless specifically authorized, and failure to submit a required Safety Data Sheet will render the offer ineligible. Packaging must conform to MIL-STD-2073-1E with specific codes for preservation, wrapping, and unit containment, and marking must follow MIL-STD-129 with no special marking required. Delivery is required within 190 days after receipt of order, FOB Origin, to the receiving facility in Texarkana, Texas, with electronic invoicing through WAWF and payment instructions governed by DFARS 252.232-7003 and 252.232-7006. All subcontracting is subject to limitations under FAR 52.219

General Info

337 mechanical drive housings delivered FOB origin in 190 days to DLA Red River, SDVOSB set-aside, zero defects, ISO 9001:2015, MIL-STD compliance.

Agency

Department Of Defense → LAND SUPPLIER OPNS VEHICLE SPT

NAICS

333612 - Speed Changer, Industrial High-Speed Drive, and Gear Manufacturing

Place of Performance

10TH STREET AND K AVENUE, TEXARKANA, TX, 75507-5000, USA

Set-Aside

SDVOSBC

Documents

RFQ SPE7L3-26-T-148Y for DLA Land and Maritime Vehicle Support

rfq

High

AI Contract Breakdown

Uniform Contract Format

Timeline

PhaseClosed

PostedAug 5

Combined Synopsis

Response DeadlineAug 17

Deadline has passed

Submission Closed

08/17/2026, 05:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → LAND SUPPLIER OPNS VEHICLE SPT

Contacts1 person available

OfficeUSA

Organization / AgencyDepartment Of Defense → LAND SUPPLIER OPNS VEHICLE SPT

Office AddressUSA

Contacts

Benita Umoren

contact@example.gov

+1 (555) 000-0000

Full Description

HOUSING,MECHANICAL DRIVE
HOUSING, MECHANICAL DRIVE.
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE
USED NOR INCORPORATED IN ANY ITEMS TO BE
DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION
SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT
DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS.
SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR
APPROVAL UNLESS THEY ARE AUTHORIZED BY THE
SPECIFICATION REQUIREMENTS.
RD002, COVERED DEFENSE INFORMATION APPLIES
RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment
RQ002: CONFIGURATION CHANGE MANAGEMENT ENGINEERING CHANGE PROPOSAL REQUEST FOR VARIANCE (DEVIATION OR WAIVER)
RQ042: Non-Tailored Higher-Level Quality Requirements (ISO 9001:2015) for Manufacturers and Non-Manufacturers
RQ006: QUALITY CONFORMANCE INSPECTION REQUIREMENTS
RQ036Phosphate Coating Supplier Certification Requirements
FULL AND OPEN COMPETITION APPLY
RQ016: COMPONENT QUALIFIED PRODUCTS LISTS (QPL)/QUALIFIED MANUFACTURERS
LISTS (QML). THIS ITEM CONTAINS ONE OR MORE COMPONENTS DEFINED BY A
SPECIFICATION(S) WITH AN ASSOCIATED QUALIFIED PRODUCTS LIST (QPL) OR
QUALIFIED MANUFACTURERS LIST (QML). QUALIFICATION REQUIREMENTS IN
PROCUREMENT NOTE H02 "COMPONENT QUALIFIED PRODUCTS LIST (QPL)/QUALIFIED
SPE7L3-26-T-148Y
SECTION B
MANUFACTURERS LIST (QML)" APPLY.
A metal casting process was identified as a means to manufacture this item. Tooling is required to produce a casting. For sourcing, tooling, materials or other information, please contact the appropriate assistance team: (Aviation, C<(>&<)>E Supply Chains) https://www.dla.mil/Aviation/Offers/Engineering/Forging-and-Casting/; (Land & Maritime Supply Chains) contact@example.gov.
RT001: MEASURING AND TEST EQUIPMENT
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN
CRITICAL APPLICATION ITEM
TDP Rev B Gen 2 IAW BASIC DRAWING NR 19207 10918160 REVISION NR H DTD 04/17/2024 PART PIECE NUMBER: 10918160
TDP Rev B Gen 2 IAW REFERENCE QAP 19207 10918160 REVISION NR F DTD 03/14/1994 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 19207 12369021 REVISION NR C DTD 05/14/2007 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE QAP 19207 10918159 REVISION NR L DTD 11/29/1989 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 19207 10918159 REVISION NR K DTD 04/17/2024 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 19207 10918160 REVISION NR DTD 01/30/2026 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE QAP 16236 SQAPCARCLTPHOS81361
SPE7L3-26-T-148Y
SECTION B
REVISION NR DTD 12/01/2017
PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE QAP 16236 CDRL-81361CARPH-17272 REVISION NR DTD 12/01/2017 PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017496046 0001 EA 337.000
NSN/MATERIAL:3040009960716
DELIVERY (IN DAYS):0190
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: ORIGIN
ACCEPTANCE POINT: ORIGIN
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:20 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:GH CUSH/DUNN MAT:JC CUSH/DUNN THKNESS:0
UNIT CONT:E5 OPI:O
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
SW3227
DLA DISTRIBUTION RED RIVER
RECEIVING BLDG 499
10TH STREET AND K AVENUE
TEXARKANA TX 75507-5000
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
SW3227
DLA DISTRIBUTION RED RIVER
SPE7L3-26-T-148Y
SECTION B
PR: 7017496046 PRLI: 0001 CONT’D
RECEIVING BLDG 499
10TH STREET AND K AVENUE
TEXARKANA TX 75507-5000
US
Need Ship Date:00/00/0000 Original Required Delivery Date:07/14/2026
SPE7L3-26-T-148Y NSN/Part Number: 3040-00-996-0716 Quantity: 337 EA Purchase Request: 7017496046QTY: 337 Delivery: 190 days ADO