Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Hull and Structural Steel Repair

Active

Federal

Response Deadline11/13/2026, 10:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract for Hull and Structural Steel Repair supports prime contractors on NAVSEA RCD Barge projects for the Puget Sound Naval Shipyard IMF under the Department of Defense. The scope of work involves performing critical repairs to the hull, main deck, superstructure, and structural members. Key tasks include cutting and preparing plating, welding hull plates, and repairing tanks and voids to ensure they are completely leak-free using commercial marine quality plating and structural steel. To ensure quality and safety, all welders must be certified according to AWS and ABS Rules for Materials and Welding 2020 Part 2. The final deliverable consists of repaired and certified hull components. This opportunity is categorized under NAICS code 331511, with a response deadline of November 13, 2026.

General Info

Hull and structural steel repair for NAVSEA RCD Barges, deadline November 13, 2026.

Agency

Department Of Defense → Puget Sound Naval Shipyard IMF

NAICS

331511 - Iron Foundries

Place of Performance

WA

Set-Aside

NONE

Documents

This scope was carved out of N4523A26Q1006.

The full solicitation package (2 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Maintenance, Repair, and Preservation of Edgecumbe Barge

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedNov 4

subcontract

Response DeadlineNov 13

Submission deadline

Response Deadline

11/13/2026, 10:00:00 PM UTCin 9 days

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Puget Sound Naval Shipyard IMF

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → Puget Sound Naval Shipyard IMF

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs repairs to the hull, main deck, superstructure, and structural members for prime contractors on NAVSEA RCD Barge projects. Cuts and prepares plating and structural members, welds hull plates, and repairs tanks and voids to ensure they are leak-free. Uses commercial marine quality plating and structural steel. Welders must be certified per AWS and ABS Rules for Materials and Welding 2020 Part 2. Delivers repaired and certified hull components.

Similar Contracts

Same NAICS industry code

Ductile Iron Pipe SupplierThis subcontract agreement establishes a partnership with a qualified supplier to provide Class-250 and Class-350 ductile iron pipe for prime contractors working on City of LaGrange infrastructure projects in Georgia. The scope of work involves the delivery of piping in 6, 8, 12, and 16 inch diameters in specified linear footages directly to project sites or designated locations. To be eligible, the supplier must maintain qualified status and provide documented delivery lead times. The solicitation was posted on November 4, 2026, with a response deadline of December 4, 2026. This procurement falls under NAICS code 331511 for pipe and tube manufacturing.

City of Lagrange

POSTED

about 8 hours ago

DEADLINE

Supply of Zinc-Finished Malleable Iron Pipe CrossesThis subcontract involves the supply of 12 zinc-finished malleable iron pipe crosses to prime contractors supporting the Defense Logistics Agency Weapons Support Fluid Handling Division. The components must strictly adhere to the technical specifications for NSN 4730002558256 and comply with RP001 DLA Packaging Requirements for all shipping and handling procedures. The project falls under NAICS code 331511 and is managed by the Department of Defense. Performance for this contract will take place in New Cumberland, Pennsylvania. Interested parties should note the response deadline of November 16, 2026.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 11 hours ago

DEADLINE

Swivel Mount Casting and Tooling ProductionThis subcontract involves the production of 2,013 completed swivel mount castings for Department of Defense small arms projects, managed by the DLA Weapons Support LSO Combat Vehicles and Armament. The selected provider will be responsible for executing the metal casting process and developing custom production tooling in strict accordance with TDP Rev B Gen 3 and Basic Drawing NR 19200 12598617 Revision P. The contractor must operate out of foundry facilities and maintain compliance with SAE AS9003 or ISO 9001 quality standards. Additionally, the project mandates adherence to DFARS Buy American requirements and prohibitions regarding the use of Hexavalent Chromium. Performance will take place in New Cumberland, Pennsylvania, with responses due by November 16, 2026.

DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 11 hours ago

DEADLINE

Supply of ASTM-A216 Grade WCB Casting/ForgingsThis subcontract with the Department of the Navy's Navsup Weapon Systems Support Mech involves the supply of certified ASTM-A216 grade WCB material for prime contractors. The scope of work requires the sourcing of raw materials or rough castings for eight Critical Safety Item valve bodies, with performance taking place in Mechanicsburg, Pennsylvania. A primary requirement of the contract is the provision of full material traceability and mandatory mill test reports that adhere to Special Emphasis material Level I standards. Interested parties must respond by December 3, 2026, for this procurement categorized under NAICS code 331511.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Rod End Locking Retainer Casting and FabricationThis subcontract involves the casting and fabrication of 606 finished rod end locking retainers for prime contractors supporting the DLA Weapons Support Fluid Handling Division. The work must be performed in Texarkana, Texas, and requires the use of specialized casting equipment and tooling specific to reference drawing 13873 005195506-19337. All manufacturing processes must strictly adhere to NAS1193 Revision 13 and MIL-STD-130N for identification marking. The project falls under NAICS code 331511 and is managed under the Department of Defense.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

Supply of Aerospace-Grade Raw Materials for Manifold ProductionThis subcontract involves the supply of aerospace-grade raw materials or semi-finished castings to prime contractors supporting Defense Logistics Agency projects for manifold production. The supplier is responsible for providing materials that strictly adhere to the alloy and grade specifications outlined in Drawing NR 77445. To maintain the integrity of Critical Safety Items, the provider must deliver full material certifications and Mill Test Reports to ensure complete traceability. The contract requires strict compliance with the Buy American Act and the Berry Amendment. The selected provider is tasked with delivering all certified raw materials directly to the manufacturer. This procurement falls under NAICS code 331511 and is managed through the Department of Defense.

Defense Logistics Agency

POSTED

DEADLINE

Sprocket Wheel Casting and Tooling FabricationThis subcontract, titled Sprocket Wheel Casting and Tooling Fabrication, involves performing specialized metal casting for prime contractors supporting DLA Weapons Support Land Supply Chain contracts. The primary objective is the production of sprocket wheels under NSN 3020010556469, which requires the execution of metal casting processes to achieve specific geometry and the design and fabrication of all necessary production tooling. The selected provider must ensure all finished cast sprocket wheels and associated tooling meet the strict technical specifications identified for the NSN. This opportunity falls under NAICS code 331511 and was posted on November 2, 2026, with a response deadline of November 17, 2026.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

Supply of Zinc Corrosion Preventive Anodes (NSN 5342007021665)This subcontract involves the supply of 150 zinc corrosion preventive anodes, specifically NSN 5342007021665, to support prime contractors on Defense Logistics Agency projects for the Weapons Support Nuclear Reactor Program. The required components must be Class 1, Type ZEP, Style C anodes with a minimum weight of 21.3 lbs designed for cycle C pipe cores. To ensure quality and traceability, each unit must be cast or die-stamped for heat identification in accordance with MIL-A-18001L standards. The procurement falls under NAICS code 331511 and is managed by the Department of Defense.

Defense Logistics Agency

POSTED

DEADLINE

Specialized Metal Casting (Supplier)This subcontract involves the supply of raw metal castings for prime contractors supporting DLA Weapons Support ASC aerospace projects. The selected supplier will be responsible for producing castings for 14 bracket assemblies based on the technical data for NSN 1560-00-875-1473, which includes the development of necessary tooling and the provision of all required material certifications. The project is managed by the Department of Defense under NAICS code 331511, with performance located in New Cumberland. Due to the nature of the aerospace components, the supplier must possess the capability to handle and protect ITAR and EAR controlled technical data. Responses for this requirement are due by November 10, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Metal Casting and Tooling for Bump Stop BracketsThis subcontract, issued by the DLA Weapons Support Strategic Acquisition Program Directorate, involves the primary fabrication of 83 Bump Stop Brackets. The selected contractor is responsible for creating the necessary casting tooling and molds to execute metal casting in accordance with TDP Rev B Gen 2 and Drawing NR 19207 12274912-1. Final deliverables include the 83 cast brackets and a formal Certificate of Conformance. To qualify, the contractor must possess metal casting foundry equipment and maintain JCP certification for ITAR/EAR controls, as well as CMMC Level 2 compliance. This opportunity is designated as a Total Small Business Set-Aside under NAICS code 331511. Responses are due by November 17, 2026.

DLA WEAPONS SUPPORT STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

DEADLINE

Metal Casting Production - Sealing SleevesThis subcontract involves the metal casting production of 56 sealing sleeves for 4.5 and 6 pressure tubes to support DLA Weapons Support SMSG Aviation Supply Chain projects. The scope of work includes the design and fabrication of necessary tooling to ensure all parts are produced according to NSN 4730-00-399-1178 specifications. Performance will take place at Tinker AFB. To be eligible, contractors must maintain SAE AS9003 or ISO 9001 quality systems and ensure full compliance with ITAR, EAR, and CMMC Level 2 requirements. The project is managed under the Department of Defense with a focus on delivering 56 completed sealing sleeves.

DLA WEAPONS SUPPORT SMSG AVIATION SUP CH CORPORATE LTC

POSTED

DEADLINE

Cast Iron Grate SupplierThis subcontract opportunity is for a supplier to provide and deliver medium-duty cast iron grates for prime contractors working on Boone County Public Works projects in Kentucky. The scope of work includes furnishing 1x1 and 2x2 grates that adhere to specific County medium-duty load ratings, utilizing cast iron foundry products, and managing F.O.B. Destination delivery to designated County locations. The solicitation was posted on November 2, 2026, with a response deadline of November 24, 2026. Falling under NAICS code 331511, the contract focuses on the procurement and delivery of completed cast iron infrastructure components to support local public works initiatives.

POSTED

DEADLINE

More opportunities from Department Of Defense → Puget Sound Naval Shipyard IMF

Same awarding agency

Marine Weld Inspection and NDTThis subcontract for Marine Weld Inspection and NDT, issued by the Puget Sound Naval Shipyard IMF under the Department of Defense, involves performing non-destructive testing on new welds for prime contractors on NAVSEA RCD Barge projects. The selected provider will utilize X-ray, ultrasonic, or dye-penetrant testing equipment to verify structural integrity, ensuring all work strictly adheres to American Bureau of Shipping requirements. The scope of work includes the delivery of comprehensive NDT inspection reports and necessary weld certifications. This opportunity falls under NAICS code 541380 and was posted on November 4, 2026, with a response deadline of November 13, 2026.

Testing Laboratories and Services

POSTED

about 16 hours ago

DEADLINE

Certified Marine Chemist and Gas Free ServicesThis subcontract opportunity with the Puget Sound Naval Shipyard IMF under the Department of Defense involves providing certified gas-free testing and industrial hygiene services for prime contractors on NAVSEA RCD Barge projects. The selected provider will be responsible for monitoring atmospheres to ensure safety for hot work and certifying safe entry for personnel through the use of specialized gas detection and atmospheric monitoring equipment. To qualify for this role, personnel must hold NFPA Marine Chemist and Certified Industrial Hygienist certifications in accordance with 29 CFR 1915. The primary deliverable for these services is the issuance of official gas-free certificates. Interested parties should note the response deadline of November 13, 2026, for this requirement categorized under NAICS code 541620.

Environmental Consulting Services

POSTED

about 16 hours ago

DEADLINE

Propulsion and Machinery Systems RepairThe Propulsion and Machinery Systems Repair subcontract, issued by the Puget Sound Naval Shipyard IMF under the Department of Defense, focuses on the maintenance and repair of main propulsion, steering, and general machinery systems for NAVSEA RCD Barge projects. The scope of work includes overhauling propulsion units and repairing steering gear utilizing specialized machinery tools and original equipment manufacturer parts. A primary objective is to ensure all machinery is maintained to OEM specifications to prevent fluid leaks and deliver fully operational systems. This opportunity is categorized under NAICS code 811310 and was posted on November 4, 2026. Interested parties must submit their responses by the deadline of November 13, 2026. The contract is structured as a subcontract supporting prime contractors in the delivery of critical maritime machinery services.

Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

about 16 hours ago

DEADLINE

Marine Electrical Repair and InstallationThis subcontract for Marine Electrical Repair and Installation supports prime contractors on NAVSEA RCD Barge projects for the Puget Sound Naval Shipyard IMF under the Department of Defense. The scope of work involves the troubleshooting, repair, and installation of electrical components and wiring, specifically utilizing marine-grade cabling and components to ensure all systems are delivered as certified operational. All work must be performed in strict adherence to commercial marine standards and practices. The opportunity is categorized under NAICS code 238210, with a response deadline set for November 13, 2026.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

about 16 hours ago

DEADLINE

Marine Painting and Coating ServicesThis subcontract for Marine Painting and Coating Services involves providing surface preparation and the application of protective coatings for prime contractors on NAVSEA RCD Barge projects. The scope of work includes surface cleaning, blasting, and painting of both the hull and superstructure using marine-grade materials. All operations must be executed in strict accordance with the SSPC Painting Manual, Volume 2, to ensure delivered surfaces meet all necessary SSPC and NAVSEA specifications. The project is associated with the Puget Sound Naval Shipyard IMF under the Department of Defense, falling under NAICS code 238320. Interested parties should note the posted date of November 4, 2026, with a response deadline set for November 13, 2026.

Painting and Wall Covering Contractors

POSTED

about 16 hours ago

DEADLINE

Marine Piping and Valve Installation/RepairThis subcontract opportunity with the Puget Sound Naval Shipyard IMF under the Department of Defense involves the installation and repair of piping systems, valves, and associated fittings for NAVSEA RCD Barge projects. The selected contractor will be responsible for installing piping components and conducting rigorous leak testing to prevent the escape of oil, water, or other fluids, ensuring all materials conform to MIL-STD-777 standards to deliver fully functional systems. The project falls under NAICS code 238220 and was posted on November 4, 2026. Interested parties must submit their responses by the deadline of November 13, 2026.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

about 16 hours ago

DEADLINE

Maintenance, Repair, and Preservation of Edgecumbe Barge

Solicitation # N4523A26Q1006

The Puget Sound Naval Shipyard and Intermediate Maintenance Facility intends to award a stand-alone Firm-Fixed-Price contract for the maintenance, repair, and preservation of one Edgecumbe RCD Barge. The scope of work includes docking and undocking the vessel, performing hull and structural repairs, replacing zinc anodes, and conducting tank and void cleaning and air tests to support ABS and USCG inspections. The contractor is responsible for transporting the vessel from the government facility in Bremerton, Washington, to their own facility and returning it upon completion. To ensure proper oversight, the contractor's facility must be located within the Puget Sound region, defined as the West Coast of the continental US from Olympia to Bellingham, Washington. The period of performance is scheduled from 15 December 2026 to 19 February 2027, with a quote submission deadline of 13 November 2026. Technical requirements mandate that all welders be certified by the American Weld Society and American Bureau of Shipping, and the contractor must maintain a documented Heavy Weather Plan. Quality standards require adherence to commercial marine practices, including specific surface preparation and coating standards such as SSPC-SP-1. Offerors must be registered in the System for Award Management and provide a detailed cost proposal that includes a five-way breakdown of waste management and disposal costs.

Ship Building and Repairing

POSTED

about 16 hours ago

DEADLINE

750kW Emergency Diesel Generator (EDG) Rental (PSNS&IMF)

Solicitation # N4523A27Q5704

Solicitation N4523A27Q5704 is a combined synopsis and request for quote for a Firm Fixed Price commercial service contract to rent one emergency diesel generator (EDG) with a minimum capacity of 750kW. The equipment will serve as part of an emergency power supply system for the USS Alexandria at the Puget Sound Naval Shipyard and Intermediate Maintenance Facility (PSNS & IMF) at Pier 6 in Bremerton, Washington. The base period of performance runs from November 20, 2026, through June 30, 2027, with an option to extend the rental until November 19, 2027. This requirement is a 100% Total Small Business Set-Aside under NAICS code 532490. Technical specifications require the generator to provide 460VAC, 3-phase, 60 Hz power, featuring a main output circuit breaker capable of a minimum continuous 900-ampere load and the ability to assume rated load within 10 seconds of start. The equipment must comply with NFPA 70, NFPA 110, and 40 CFR 63 Subpart ZZZ standards. Prior to acceptance, the contractor must perform a load test to at least 80% of full load for one hour and provide EPA off-road certification and fuel analysis confirming clear and bright condition. Award will be based on the most advantageous offer considering price and technical acceptability. Offerors must submit quotes by November 5, 2026, including completed CLIN pricing and supporting commercial pricing documentation. Access to the facility requires strict adherence to security protocols, including U.S. citizenship for unescorted access and DBIDS enrollment. Invoicing must be processed electronically through the Wide Area Workflow (WAWF) system.

Other Commercial and Industrial Machinery and Equipment Rental and Leasing

POSTED

DEADLINE

in about 17 hours

Supply of Accelerometer Part Number 631M24This subcontract involves the procurement and delivery of accelerometer part number 631M24 to support prime contractors operating at the Puget Sound Naval Shipyard and Intermediate Maintenance Facility. The selected provider is responsible for sourcing and delivering the physical hardware components in strict accordance with the original manufacturer specifications. Managed under the Department of Defense for the Puget Sound Naval Shipyard IMF, the work will be performed in Bremerton, Washington. The opportunity is categorized under NAICS code 334515, with a response deadline set for November 6, 2026.

Instrument Manufacturing for Measuring and Testing Electricity and Electrical Signals

POSTED

DEADLINE

Solicitation # N4523A-27-Q-4002

The Naval Sea Systems Command Contracting Department intends to procure Accelerometer Part Number 631M24 for the Puget Sound Naval Shipyard and Intermediate Maintenance Facility located in Bremerton, Washington. This requirement, identified by solicitation number N4523A-27-Q-4002, is intended to be awarded on a sole source basis to PCB Piezotronics under FAR 6.302. The procurement will be conducted as a commercial, firm fixed-price supply contract following the acquisition procedures for commercial services outlined in FAR Part 12. The solicitation is scheduled to be posted to sam.gov on or about November 2, 2026, with a response deadline of November 6, 2026. While the government intends to sole source this requirement, interested parties may submit proposals to demonstrate their capability, which the government will use to determine if a competitive procurement is necessary. This action falls under NAICS code 334515 and is managed by the Department of Defense.

Instrument Manufacturing for Measuring and Testing Electricity and Electrical Signals

POSTED

DEADLINE

Diesel Fuel Analysis and Certification ServicesThis subcontract for Diesel Fuel Analysis and Certification Services supports prime contractors on Navy projects at the Puget Sound Naval Shipyard and Intermediate Maintenance Facility in Bremerton. The scope of work involves performing specialized laboratory testing and analysis of diesel fuel using professional grade equipment. Key technical requirements include conducting visual inspections for clear and bright conditions according to ASTM D-4176 and performing particulate testing per ASTM D-2276 to verify that levels remain below 15 mg/L. The selected provider will be responsible for delivering formal fuel analysis reports and certifications that confirm all clarity and particulate standards have been met. This opportunity is designated as a total Small Business Set Aside under NAICS code 541380. Interested parties should note the response deadline of November 5, 2026.

Testing Laboratories and Services

POSTED

DEADLINE

in about 17 hours

750kW Emergency Diesel Generator Rental and InstallationThis small business set-aside subcontract involves the supply and lease of a diesel generator with a minimum capacity of 750kW for prime contractors working on Navy projects at the Puget Sound Naval Shipyard and Intermediate Maintenance Facility in Bremerton. The scope of work requires the delivery of NEMA 3R ISO enclosed units equipped with main output circuit breakers and remote electrical start capabilities. The provider is responsible for conducting delivery testing, providing on-site operator training, and delivering a fully operational emergency diesel generator complete with an O&M manual and EPA off-road certification. Strict adherence to regulatory standards is mandatory, including compliance with NFPA 70, NFPA 110, and 40 CFR 63 Subpart ZZZ. This opportunity is categorized under NAICS code 532490 and is managed through the Department of Defense. Interested parties must adhere to the response deadline of November 5, 2026.

Other Commercial and Industrial Machinery and Equipment Rental and Leasing

POSTED

DEADLINE

in about 17 hours

Earlier notices in this NAICS code

Posted before this notice, open and closed

SUPPORT ASSEMBLY, SP

Solicitation # SPE4A7-26-R-0651

Defense Logistics Agency

POSTED

DEADLINE

Metallic Bent Tube Manufacturing (NSN 4710015929384)

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

Casting and Forging for Tube Elbows

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

Brake Drum Casting and Fabrication

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

Precision Metal Casting and Forging for Air Director Ducts

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

in about 13 hours

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS