Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

HVAC Ventilation System Upgrade

Active

Federal

Response Deadline09/10/2026, 06:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract involves the installation or modification of bathroom exhaust fans and ductwork at NUWC Newport to ensure compliance with building codes and indoor air quality standards. This work is part of a broader HVAC ventilation system upgrade aimed at enhancing facility safety and environmental health, specifically targeting ventilation systems in bathroom areas to properly remove moisture, odors, and contaminants. The effort requires precise adherence to technical specifications and regulatory requirements, with all work performed to meet or exceed applicable codes. This is a Small Business Set Aside subcontract under NAICS code 238220, reserved exclusively for small businesses, and is tied to the Department of Defense through the Naval Undersea Warfare Center Division Newport. The project is located in Newport, Rhode Island, with a response deadline of September 10, 2026, and was posted for solicitation on August 7, 2026. All contractors must be prepared to demonstrate capability in HVAC ventilation systems, ductwork fabrication and installation, and familiarity with federal facility compliance standards. Performance is expected to be completed at the designated site in accordance with the terms set forth in the solicitation.

General Info

Small business subcontract for bathroom exhaust fan and ductwork installation at NUWC Newport, meeting DoD ventilation codes by 2026.

Agency

Department Of Defense → Nuwc Division NewportView Agency

NAICS

238220 - Plumbing, Heating, and Air-Conditioning ContractorsView NAICS

Place of Performance

Newport, RI, 02841, USA

Set-Aside

SBA

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 7

subcontract

Response DeadlineSep 10

Submission deadline

Response Deadline

09/10/2026, 06:00:00 PM UTCin about 1 month

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Nuwc Division Newport

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → Nuwc Division Newport

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Installation or modification of bathroom exhaust fans and ductwork to meet code and indoor air quality standards at NUWC Newport.

Similar Contracts

Same NAICS industry code

Fire Alarm System Diagnostic and Repair ServicesALCORN STATE UNIVERSITY is seeking qualified contractors to provide comprehensive fire alarm system diagnostic and repair services across its campus facilities. The scope of work includes inspection, troubleshooting, repair, and routine maintenance of all fire alarm components such as control panels, smoke and heat detectors, manual pull stations, notification appliances, and associated electrical wiring. Contractors must be prepared to respond to system malfunctions, perform preventive maintenance, and ensure all equipment complies with applicable fire safety codes and standards. The contract is structured as a subcontract and is classified under NAICS code 238220 for electrical and other construction installation contractors. Solicitations are open with a response deadline of August 31, 2026, and the services are expected to be performed at various locations within the university’s campus in Mississippi.

ALCORN STATE UNIVERSITY

POSTED

about 8 hours ago

DEADLINE

HVAC System Installation

0P100MHDOFFOFSCTY - Office of the Secretary

POSTED

about 9 hours ago

DEADLINE

Plumbing and Piping Systems

0P100MHDOFFOFSCTY - Office of the Secretary

POSTED

about 9 hours ago

DEADLINE

ESJC – FIRE EXTINGUISHER SERVICES

Solicitation # esjc-fire-extinguisher-services

This solicitation is for fire extinguisher inspection and servicing services at the Excelsior Springs Job Corps Center in Missouri, issued as a subcontracting opportunity by Education & Training Resources. The contract requires quarterly inspections of 175 fire extinguishers across 22 campus buildings and center-owned vehicles, with replacement of used or uncharged units as needed. Each extinguisher must be tagged with an inspection label, and all work must comply with the current National Electrical Code and NFPA 101, Life Safety Code, along with applicable OSHA regulations and local, state, and federal building codes. The period of performance runs from October 1, 2026, through September 31, 2027, with services scheduled four times per year. Bids must be submitted by 12 p.m. CST on August 14, 2026, and must include a completed Bid Sheet with a detailed cost breakdown, Missouri-specific licensing, vendor acknowledgment form, Form W-9, FFATA Notice, Anti-Lobbying Certification, certificates of insurance, and a proposed service schedule. All responses are evaluated based on best overall value, not merely lowest price, and failure to meet any mandatory requirements will result in disqualification. The contract is set aside for small business concerns, including small disadvantaged, women-owned, HUBZone, veteran-owned, and service-disabled veteran-owned small businesses, under NAICS code 238220. The winning bidder must maintain an active SAM.gov registration with a Unique Entity ID and comply with federal labor standards including the Service Contract Act, Minimum Wage requirements under Executive Order 14026, and FAR-certified clauses regarding debarment, anti-lobbying, and information dissemination. Safety and conduct rules prohibit fraternization with students or staff, consumption of alcohol, drugs, tobacco, or firearms on-site, and require adherence to center security policies. Bonding is required based on contract value: a 100% payment bond for projects exceeding $35,000 but not surpassing $150,000, and both performance and payment bonds for contracts over $150,000. Insurance coverage for builders risk, automobile, liability, and workers compensation must be provided. Payment is due within 30 days of invoicing, and all deliverables are F.O.B. destination with final acceptance conducted by the center. Technical coordination is handled by William Boucher, while procurement inquiries should

ETR/Excelsior Springs Job Corps

POSTED

about 10 hours ago

DEADLINE

Boiler replacement in IOOF and Administration

Solicitation # boiler-replacement-ioof-administration

The contract seeks a licensed HVAC contractor to replace three boilers across two buildings at the Flint Hills Job Corps Center in Manhattan, Kansas—specifically, two existing Peerless gas-fired boilers in Building 1 (IOOF) and one new high-efficiency gas-fired boiler in Building 2 (Administrative/Academic). The project requires the installation of boilers with specified input and output capacities: 1,680,000 B.T.U. input and 1,344,000 B.T.U. output for the IOOF boilers and a 600,000 B.T.U. input, 572,000 B.T.U. output, 94% Energy Star-rated boiler for the administrative building. Commissioning of the boiler control systems by a qualified agent is mandatory, along with the submission of comprehensive documentation including inspection reports, test results, warranties, commissioning reports, and operations and maintenance manuals. All work must comply with applicable Kansas state codes including NEC, NFPA-72, NFPA 101, IBC, IMC, IPC, and IECC, as well as EPA regulations such as 40CFR761 and 40 CFR 61 subpart M, and OSHA standards under 29CFR1926. The contractor must install preformed PVC pipe labels with flow direction indicators and is responsible for receiving, storing, and securing all materials and equipment on site. Performance must adhere to a 90-day total period with 60 days allocated to substantial completion and 30 days to contract close-out, with work to begin within fourteen days of the Notice to Proceed and fully completed within 120 calendar days. Substantial completion requires a formal walk-through with the Center’s authorized representative and the resolution of all punch list items, while final completion mandates submission of government inspection reports, manufacturer start-up checklists, and third-party water testing results. The contract mandates a Certificate of Liability Insurance naming the Center as both certificate holder and additional insured, compliance with the Davis-Bacon Act wage determinations, and proper licensing and permitting under Manhattan, Kansas regulations. The contractor must provide a ten-year warranty on boiler heat exchangers, a two-year warranty on all other parts, a one-year workmanship warranty, and a one-year preventive maintenance agreement for the Center’s use. Offerors must be certified small businesses under the SBA’s set-aside categories including SB, SDB,

Serrato Corporation DBA Flint Hills Job Corps

POSTED

about 10 hours ago

DEADLINE

Keystone Lincoln Dorm Water Heater Repair

Solicitation # keystone-lincoln-dorm-water-heater-repair

The contract is for the repair of a AquaPlex Turbopower 96 hot water heater, Model #100L400A-TPX with Serial Number F008076, located in the Lincoln dormitory at the Keystone Job Corps Center in Drums, Pennsylvania. The scope of work includes replacing specific components such as the blower motor assembly, gas valve, hot surface ignitor, ignitor gasket, and electrode flame rod. Labor and materials must be itemized separately in all proposals, and the contractor is required to comply with Davis-Bacon wage standards and submit certified payroll records. All offerors must be registered and active on SAM.gov to be eligible. The solicitation is set aside exclusively for small business categories, including Small Business, Small Disadvantaged Business, Women-Owned Small Business, HUBZone Small Business, Veteran-Owned Small Business, and Service-Disabled Veteran-Owned Small Business, under NAICS code 238220. The place of performance is clearly defined as Drums, Pennsylvania, but the period of performance, delivery schedule, FOB terms, and estimated contract value are not specified. No formal evaluation factors, weighting criteria, or award basis such as LPTA or best-value are provided. Proposal submission guidelines, including format, deadline, and submission portal, are not detailed in the available documentation, though the posted date is August 7, 2026, and the response deadline is August 14, 2026. The primary point of contact for inquiries is Jennie Drumheller, reachable via email and phone.

Adams & Associates Keystone Red Rock Job Corps

POSTED

about 10 hours ago

DEADLINE

2026-Maui-Dorm Exhaust Fans

Solicitation # 2026- Maui- Dorm Exhaust Fans

This subcontracting opportunity with Management and Training Corporation (MTC) for the replacement of approximately 25 exhaust fans across three dormitories at the Hawaii Job Corps Center in Makawao, Hawaii, is a fixed-price, single lump sum contract structured under a Small Business set-aside that includes eligibility for Small Business, Small Disadvantaged Business, Women-Owned Small Business, HUBZone Small Business, Veteran-Owned Small Business, and Service-Disabled Veteran-Owned Small Business categories. Solicited under NAICS code 238220, the bid must be submitted via email by 3:00 PM HST on August 28, 2026, to Karllene Allen and Mila Handel, and requires compliance with detailed procedural and documentation standards including a fully completed MTC Bid for Lump Sum Contract form, signed by an authorized representative, along with a comprehensive cost breakout covering materials, labor, equipment, fees, bonds, subcontractor costs, overhead, profit, and other direct or indirect expenses. Bidders must also complete and submit the MTC Supplier Packet, including Form W-9, Supplier Self-Certification, and Acceptance of Terms and Conditions, and provide three references for projects of comparable scope and value. A mandatory site visit with signature on an attendance roster is required prior to bid submission, emphasizing the importance of firsthand knowledge of the work conditions and constraints. The contract imposes strict compliance with federal and Department of Labor requirements, including adherence to Executive Order 13658 for the prevailing federal contractor minimum wage, submission of weekly certified payroll reports, and display of bilingual Davis-Bacon Act posters. Bids exceeding $25,000 must include a 20% bid bond, and upon award, performance and payment bonds equaling 100% of the contract value are required from an A-rated surety company approved by MTC. Insurance mandates include general liability coverage of $1 million per occurrence and $3 million aggregate with MTC listed as additional insured, auto liability of $1 million, worker’s compensation of at least $500,000, and professional liability coverage where applicable. Upon award, contractors must disclose any first-tier subcontractors with values over $30,000 and certify they are not debarred under FAR 52.209-6. Contractors must also submit Safety Data Sheets for all hazardous materials used, provide two complete operation and maintenance manuals, deliver at least two hours of on-site training for

Management & Training Corporation

POSTED

about 10 hours ago

DEADLINE

NJCC Building 32 Boiler Replacement in Vermont

Solicitation # njcc-building-32-boiler-replacement-vermont

This solicitation seeks bids to replace an existing oil-fired boiler at Building 32 of the Northlands Job Corps Center in Vergennes, Vermont, with a fully compliant, high-efficiency propane steam boiler system. The scope of work includes demolition and proper disposal of the current oil-fired boiler and blow down separator, installation of a new propane steam boiler and gas burner meeting FEMP JCH-814 efficiency standards, replacement of the duplex boiler feed tank and control panel, condensate tanks, steam traps, Y strainers, check valves, and condensate receivers, installation of new boiler feed water piping with a reduced pressure backflow preventer, insulation of all piping, modification of the existing stack, and full system testing including fuel/oxygen mix verification, water side cleaning, boiler skimming, and startup. All work must comply with the International Mechanical Code, International Energy Conservation Code, International Plumbing Code, International Fuel Gas Code, National Electrical Code, NFPA Life Safety 101, and NFPA 58. The project requires the provision of a propane gas tank and all associated materials, with all items quoted F.O.B. destination and no additional charges for delivery, packing, or insurance accepted unless explicitly included and approved. The solicitation is open only to small business concerns as defined under the SBA’s set-aside programs, including Small Business, Small Disadvantaged Business, Women-Owned Small Business, HUBZone, Veteran-Owned Small Business, and Service-Disabled Veteran-Owned Small Business. Bidders must demonstrate active registration at SAM.gov with a Unique Entity ID, submit a completed Bid Sheet with detailed line-item pricing for equipment, materials, and labor, provide all required Vermont licensing and credentials, and include mandatory documentation such as Form W-9, Vendor Acknowledgement Form, FFATA Notice, Anti-Lobbying Certification if applicable, Certificates of Insurance listing ETR as certificate holder, and a proposed schedule of work. Bonding is required based on project cost: a 100% payment bond plus another form of payment protection for projects between $35,000 and $150,000, and both 100% performance and payment bonds for projects exceeding $150,000. Contractors must comply with the Davis-Bacon Act, Service Contract Act, and Executive Order 14026 minimum wage requirements, adhere to strict center security and conduct rules prohibiting fraternization with staff or students and the possession of alcohol, drugs,

Northlands Job Corps Center /ETR

POSTED

about 10 hours ago

DEADLINE

RFQ#3857 Freezer Door Replacement

Solicitation # RFQ#3857

Management & Training Corporation (MTC) has issued RFQ#3857 Freezer Door Replacement as a subcontracting opportunity for the Charleston Job Corps Center located at 1000 Curtis Price Way, Charleston, WV 25311. The solicitation seeks a qualified contractor to provide all labor, materials, equipment, transportation, supervision, and incidentals required to remove three existing walk-in refrigeration doors— one cooler and two freezers—and install new replacement doors complete with all associated hardware including hinges, latches, gaskets, closers, thresholds, and related accessories. The work must result in doors that align properly, provide an airtight seal, operate smoothly without binding, and be fully functional upon completion. All existing doors and debris must be removed and disposed of properly, and the contractor is required to provide manufacturer warranty documentation and maintenance recommendations. The contract is subject to the Service Contract Labor Standards under FAR 52.222-41 with a mandated wage determination WD#2015-4347 (Rev 29) dated July 8, 2025, requiring compliance with federal prevailing wage rates for service employees. The solicitation is set aside exclusively for small business concerns including Small Disadvantaged Businesses, Women-Owned Small Businesses, HUBZone businesses, Veteran-Owned Small Businesses, and Service-Disabled Veteran-Owned Small Businesses, with eligibility based on the NAICS code 238220 and a size standard of $19 million in annual receipts. Bidders must self-certify their socioeconomic status and provide comprehensive documentation including a completed W-9, Self-Certification Form, Acceptance of Terms and Conditions, three references for similar projects, proof of insurance meeting minimums of $1 million per occurrence for general liability, $1 million for auto coverage, and $500,000 for workers’ compensation, and an insurance certificate naming MTC, DOL, and Charleston Job Corps as certificate holder and additional insured. First-tier subcontractors exceeding $30,000 must disclose any debarment or suspension status under FAR 52.209-6 and all contractors must comply with reporting executive compensation and first-tier subcontract awards under FAR 52.204-10. The contractor must also adhere to Department of Labor requirements including protection of personally identifiable information, mandatory training, records management, and immediate one-hour reporting of any data breach to DOL. All work must be performed on

Management & Training Corporation

POSTED

about 10 hours ago

DEADLINE

Plumbing and Gas Line Repair

Solicitation # plumbing-gas-line-repair

The contract entails the correction of plumbing and gas system deficiencies at the Earle C. Clements Job Corps Center in Morganfield, Kentucky, to ensure compliance with the International Plumbing Code and safety standards. The awarded contractor must provide all labor, materials, equipment, supervision, and incidentals required to complete the work in full operating condition, with specific tasks including gas piping repairs at Building 305 involving isolation, pressure testing, and valve replacement; installation of backflow preventers at Buildings 607 and 701; and relocation of water piping away from electrical panels at Building 610. All work must include piping, fittings, supports, pressure and leak testing, and full restoration of affected areas. The contract is a fixed-price, single lump sum award with an estimated value not exceeding $25,000, and the contractor must achieve substantial completion within 60 consecutive business days after receiving a written Notice to Proceed, beginning work no later than five business days after the agreed start date. A mandatory pre-construction meeting is required upon issuance of the Notice to Proceed. The contractor must adhere to federal labor standards, including payment of the prevailing Federal Contractor Minimum Wage as required by Executive Order 13658, and submit certified payroll reports on a weekly basis. Compliance with FAR clauses such as 52.222-11 requires submission of the SF 1413 Statement and Acknowledgement form, regardless of contract value, while FAR 52.204-10 mandates reporting of executive compensation and first-tier subcontract awards if the contract value exceeds $40,000. The solicitation is set aside for small business entities, including Small Disadvantaged Businesses, Women-Owned Small Businesses, HUBZone, Veteran-Owned, and Service-Disabled Veteran-Owned Small Businesses, and all subcontractors must self-certify under NAICS code 238220. Required documentation includes a detailed bid breakout on company letterhead, completed MTC Supplier Packet containing Form W-9 and Self-Certification, three references for comparable projects, and compliance with insurance requirements including $1 million general liability coverage, $1 million auto liability, and $500,000 workers’ compensation. Contractors must also submit Safety Data Sheets for hazardous materials, verify underground utilities prior to excavation, and provide two hours of on-site training for facility personnel. Final acceptance requires a formal punch list process followed by a final inspection upon resolution of all deficiencies, with liquid

Earle C. Clements Job Corps Center

POSTED

about 10 hours ago

DEADLINE

Fiber Optic Cable Installation – Underground Conduit Pulling & Splicing

Texas Department of Transportation

POSTED

about 10 hours ago

DEADLINE

Irrigation System Installation

Texas Department of Transportation

POSTED

about 10 hours ago

DEADLINE

More opportunities from Department Of Defense → Nuwc Division Newport

Same awarding agency

Painting and Coating ApplicationThe contract calls for surface preparation and application of mold and mildew-resistant paints and coatings as the final finish work in renovated bathrooms, ensuring durability and compliance with hygiene standards in high-moisture environments. The work is classified under NAICS code 238340 and is structured as a subcontract under a Small Business Set Aside, specifically reserved for small businesses as defined by the SBA. The project is located in Newport, with a zip code of 02841, and is managed under the Department of Defense by Naval Undersea Warfare Center Division Newport, indicating the work is for a federal facility requiring strict adherence to military or defense-related construction and renovation protocols. The solicitation was posted on August 7, 2026, with a response deadline of September 10, 2026, at 6:00 PM, providing potential contractors approximately 34 days to prepare and submit proposals. While no specific point of contact or agency office address is provided, the place of performance is clearly identified as Newport, and the work is intended as part of a larger renovation effort where surface prep and specialized coating application are critical to long-term facility integrity. Contractors must be certified small businesses eligible for SBA set-asides and must demonstrate experience in performing similar finish work in institutional or government-owned bathroom facilities, particularly those requiring resistance to moisture-related degradation.

Tile and Terrazzo Contractors

POSTED

about 14 hours ago

DEADLINE

in about 1 month

Tile and Flooring InstallationThe contract entails the installation of ceramic, porcelain, or vinyl tile flooring and wall surrounds in bathroom areas, including the application of waterproofing membranes and grouting to ensure durable and moisture-resistant finishes. Work is scoped specifically for bathroom environments where water exposure requires precise material selection and installation techniques to maintain structural integrity and compliance with high-performance standards. The project is designated as a Small Business Set Aside under the SBA program, reserved exclusively for small business concerns, and the North American Industry Classification System code 238353 confirms the work falls under specialty trade contractors engaged in flooring installation. Performance is required at the Naval Undersea Warfare Center Division Newport location in Newport, Rhode Island, with a zip code of 02841, ensuring the work supports U.S. Department of Defense facilities under the Navy’s infrastructure management. The opportunity was posted on August 7, 2026, and responses must be submitted no later than September 10, 2026, at 6:00 PM Eastern Time, with the solicitation being issued as a subcontract under the broader oversight of the Defense Department.

POSTED

about 14 hours ago

DEADLINE

in about 1 month

Drywall, Ceiling, and Interior FinishingThe contract entails the installation of moisture-resistant drywall along with associated finishing work including taping, mudding, and texturing in renovated bathroom areas, as well as the setup of ceiling grid systems to support acoustic or decorative ceiling tiles. All work must meet stringent requirements for durability and performance in high-moisture environments, ensuring long-term resistance to mold, mildew, and water damage. The project is specifically scoped for bathroom renovations and requires precise execution to align with structural and aesthetic standards in federal facilities. This is a Small Business Set Aside subcontract under the NAICS code 238352 for Interior Finish Work, posted by the Naval Undersea Warfare Center Division Newport, an agency within the Department of Defense. The opportunity is open for proposals with a response deadline of September 10, 2026, and the work must be performed at the location in Newport, Rhode Island, with zip code 02841. Participation is restricted to qualified small businesses as defined by the SBA, and the contract is intended to support federal infrastructure upgrades through specialized interior finishing capabilities.

POSTED

about 14 hours ago

DEADLINE

in about 1 month

Demolition and Site PreparationThe contract, titled Demolition and Site Preparation, outlines the complete removal of all existing bathroom components including walls, fixtures, flooring, and mechanical systems, along with the hauling away of all debris and thorough site cleanup. This work is categorized under NAICS code 238990 and is structured as a subcontract with a Small Business Set Aside - Total designation, ensuring eligibility and preference for qualified small businesses. The solicitation was posted on August 7, 2026, with a response deadline of September 10, 2026, at 6:00 PM. Performance of the work is required at Newport, Rhode Island, with the zip code 02841, under the purview of the Naval Undersea Warfare Center Division Newport within the Department of Defense. All activities must comply with federal requirements for demolition and site preparation, with an emphasis on safety, waste management, and environmental compliance during removal and cleanup operations.

All Other Specialty Trade Contractors

POSTED

about 14 hours ago

DEADLINE

in about 1 month

Electrical System Upgrade and Lighting InstallationThe contract involves the upgrade of electrical systems in renovated bathrooms, focusing on the replacement and enhancement of circuits, outlets, switches, and lighting fixtures, with mandatory installation of GFCI devices to ensure safety and full compliance with the National Electrical Code. The work must be performed in accordance with all current NEC standards to guarantee reliable and code-compliant electrical infrastructure. This subcontract is part of a broader renovation initiative under the Department of Defense, specifically managed by Nuwc Division Newport, with performance required at the facility located in Newport, Rhode Island, zip code 02841. The solicitation is designated as a Small Business Set Aside under NAICS code 238210, which specifically classifies electrical contractors and ensures eligibility is restricted to small businesses as defined by the SBA. The opportunity was posted on August 7, 2026, with a firm response deadline of September 10, 2026, at 6:00 p.m. All proposals must address the scope of work comprehensively, ensuring that all upgrades meet rigorous safety and performance benchmarks. There is no designated point of contact provided, and interested parties must refer to the official SAM.gov portal for additional details and submission requirements.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

about 14 hours ago

DEADLINE

in about 1 month

Plumbing Rough-In and Fixture InstallationThe contract calls for the installation of new plumbing lines, drains, vents, and fixtures in renovated bathrooms at NUWC Newport, with all work required to meet federal wage standards and accommodate the challenges of working in confined spaces. The project is classified as a subcontract under a Small Business Set Aside, specifically designated for total small business participation, and is tied to the NAICS code 238220 for plumbing, heating, and air-conditioning contractors. All performance must occur at the Newport location with a zip code of 02841, under the oversight of the Department of Defense through its NUWC Division Newport. The solicitation was posted on August 7, 2026, with a deadline for responses set for September 10, 2026, at 6:00 p.m. The work demands strict adherence to safety and compliance protocols, particularly given the nature of confined space operations and federal labor requirements.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

about 14 hours ago

DEADLINE

in about 1 month

Exterior Sign Removal

Solicitation # N6660426Q0450

The Naval Undersea Warfare Center Division Newport is soliciting bids for the removal of exterior signs at its facility in Newport, Rhode Island, under solicitation number N6660426Q0450, with a response deadline of September 9, 2026. This is a Small Business Set-Aside for the NAICS code 236220, with a total set-aside and estimated contract value of less than $25,000, awarded on a Lowest Price Technically Acceptable basis. Proposals must be submitted electronically via email to the designated point of contact and must include a Technical Approach narrative limited to 15 pages, demonstrating a step-by-step execution plan, risk mitigation strategies, and a preliminary project schedule; past performance must be rated acceptable, and price must be reasonable and complete. Only small businesses registered in SAM.gov with a valid UEI and CAGE code may respond, and contractors must submit a bid guarantee equal to 20% of the proposed price in the form of a surety bond, certified check, or irrevocable letter of credit. The work is firm-fixed-price, requiring compliance with all government specifications and drawings, including adherence to the Davis Bacon Act wage determination for Rhode Island, OSHA construction standards, and the U.S. Army Corps of Engineers EM 385-1-1 safety requirements. Contractors must also comply with stringent cybersecurity mandates under DFARS 252.204-7012 and 252.204-7020, safeguarding any Covered Defense Information and meeting NIST SP 800-171 controls, while the use of hexavalent chromium is strictly prohibited. All payment requests must be submitted electronically via Wide Area WorkFlow, and contractors must maintain minimum insurance coverage including workers’ compensation, bodily injury liability, and automobile liability with a 30-day cancellation notice clause. Site access requires strict safety compliance, including mandatory training, immediate reporting of incidents, and potential removal for unsafe behavior. Access to controlled attachments such as specifications, drawings, and hazard logs requires special permission through SAM.gov, with requestors needing appropriate data roles or an Administrator Appointment Letter. The contract includes clauses for differing site conditions, government property, accident prevention, cleaning up, and termination for convenience, and performance is restricted to the Newport location with all acceptance occurring on-site by the Government.

Commercial and Institutional Building Construction

POSTED

about 14 hours ago

DEADLINE

in about 1 month

MK 66 Mod 0 Heavyweight Undersea Training Target (MK 66 HUTT)

Solicitation # N6660426R0230

POSTED

about 14 hours ago

DEADLINE

CONSTRUCTION - NUWCDIVNPT: Bathroom Renovations, B1318-R103, 104, 105

Solicitation # N66604-26-Q-0451

The Naval Undersea Warfare Center Division, Newport is seeking contractors for bathroom renovations in Building 1318, specifically in Rooms 103, 104, and 105, under solicitation number N66604-26-Q-0451. This is a Small Business Set Aside with a NAICS code of 236220, and responses are due by September 10, 2026. While contractor certification under the JCP program is not required, all participants must maintain an active registration in SAM.gov to access solicitation materials, including drawings, specifications, and photos. Access to controlled attachments is restricted and requires either a data entry or administrator role within the Contract Opportunities domain on SAM.gov; if such a role is not held, the entity must have an appointed administrator assign the necessary permissions or submit an Entity Administrator Appointment Letter. Requesting access involves clicking the attachment title and providing a justification, after which the contracting officer must approve the request before viewing rights are granted. Contractors are responsible for handling all received documents in accordance with federal directives. The project is located in Newport, Rhode Island, and primary point of contact is Amy Prisco, with secondary contact Michael Ouellette, both reachable via U.S. Navy email addresses.

Commercial and Institutional Building Construction

POSTED

about 14 hours ago

DEADLINE

in about 1 month

Solicitation # N6660426Q0455

The contract, identified by solicitation number N6660426Q0455 and titled DNA Analyses, is a Small Business Set-Aside under NAICS code 541380 with a size standard of $19.0 million, issued by the Naval Undersea Warfare Center Division Newport under the Department of Defense. The primary objective is to procure 16S and 18S ribosomal RNA gene sequencing services for biofilm samples collected from underwater test panels at depths of 50m, 250m, 500m, and 950m to analyze microbial composition and support Navy research on deep-sea biofouling and antifouling coating performance. The contract is structured as an Indefinite Delivery/Indefinite Quantity (IDIQ) with a firm fixed price basis, featuring a maximum ceiling of 1,710 jobs and a minimum guarantee of 510 jobs, though no unit pricing has been established—pricing will be determined by offerors in response to the solicitation. Performance occurs at the contractor’s laboratory using samples provided by NUWC Newport, with final deliverables—including taxonomic reports in PDF format and raw sequence data in Excel—requiring delivery to and acceptance by the Government at Newport, RI. Offerors must submit a technical approach not exceeding one page and proof of an internal Quality Management System also limited to one page, with award to be made on a Lowest Price Technically Acceptable basis. Proposals must include a completed pricing table and comply with stringent cybersecurity and information handling protocols, including adherence to NISPOM, DFARS 252.204-7012 for safeguarding covered defense information, and DoDI 5230.24 for marking technical data. Electronic spillage is strictly prohibited and carries full financial liability for the contractor. Contractual clauses impose limitations on order quantities, prohibiting orders below 75 jobs and capping cumulative orders from a single office at 510 jobs per 60-day period. All contractors must maintain an OPSEC program compliant with NSPM-28, implement safeguarding measures for Controlled Unclassified Information, and ensure personnel comply with facility security policies when working at government sites. The response deadline has been amended to August 7, 2026, and submissions must be sent electronically to Elizabeth Peckham at NUWC Newport. No physical packaging or bar-coding requirements are specified,

Testing Laboratories and Services

POSTED

about 14 hours ago

DEADLINE

Unable to Identify Subcontract OpportunitiesDue to a configuration error where the FOUNDRY_API_URL was not set, the system was unable to access prime contract data, preventing the identification or decomposition of any subcontract opportunities. As a result, the solicitation titled "Unable to Identify Subcontract Opportunities" was posted on August 6, 2026, with a response deadline of August 14, 2026, and is classified as a Small Business Set Aside under the SBA, indicating it is intended entirely for small businesses. The agency involved is Nuwc Division Newport under the Department of Defense, but no solicitation number, NAICS code, office address, place of performance, or point of contact information is available due to the data access failure. The opportunity remains listed in the system with a public link for reference, though no actionable subcontract details can be derived until the underlying configuration issue is resolved.

POSTED

DEADLINE

Technical Documentation and Drawing Interpretation SupportThe contract involves providing technical support for interpreting complex engineering drawings and geometric dimensioning and tolerancing specifications to enable precise machining of CM420D01 fixtures. The work requires deep expertise in translating design intent into actionable manufacturing instructions, including the development of optimized computer-aided manufacturing programs and detailed inspection plans that ensure dimensional accuracy and compliance with stringent quality standards. The contractor must possess advanced capabilities in both drawing interpretation and CAM programming to support the production of high-precision components critical to defense applications. This subcontract is issued by the Naval Undersea Warfare Center Division Newport under the Department of Defense and is classified under NAICS code 541330 for engineering services. The performance location is Newport, Rhode Island with a zip code of 02841. The solicitation was posted on August 6, 2026, and responses are due by August 17, 2026. While no specific set-aside designation is noted, the work supports defense-related manufacturing objectives requiring certified technical proficiency in precision machining support services.

Engineering Services

POSTED

DEADLINE