This Government Contract opportunity from Department Of Defense was posted on September 2, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Hydraulic Component Supply

Closed

Federal

Submission Closed10/02/2026, 08:30:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

Solicitation # SPE4A7-27-R-X012

Solicitation SPE4A7-27-R-X012 is a request for quotations issued by the DLA Weapons Support ASC for a Cylinder Parts Kit, identified by NSN 1650-00-076-6377 and Northrop Grumman part number 123GSK66-100. The government intends to award an Indefinite Delivery Contract with a five-year base period and a total ceiling not to exceed 349,999.99 dollars. The contract includes a guaranteed minimum of 10 units, with an estimated annual demand of 40 units and a maximum delivery order quantity of 40 units. Delivery is required within 186 days after receipt of order on an FOB Destination basis. Award evaluation will prioritize past performance, specifically weighing SPRS assessments and historical quality and delivery compliance most heavily, alongside quoted delivery and price. The contractor must adhere to strict quality and technical standards, including CMMC Level 2 certification, ITAR/EAR export controls, and MIL-STD-2073-1E packaging and MIL-STD-129 marking requirements. Inspection and acceptance will occur at the origin. Invoicing and payment must be processed electronically through the Wide Area WorkFlow system. Offerors must maintain active registration in the System for Award Management and provide traceability evidence for exact products upon request.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

HEAD, LINEAR ACTUATING CYLINDER

Solicitation # SPE4A7-27-R-0003

Solicitation SPE4A7-27-R-0003 is a negotiated request for proposal issued by DLA Aviation for the procurement of Head, Linear Actuating Cylinder parts, identified by NSN 1650-00-692-7492. This is a total small business set-aside intended to result in an indefinite quantity contract with a five-year base period. The procurement covers a quantity of 24,000 units under firm-fixed-pricing terms, with a delivery schedule of 365 days after receipt of order. The item is designated as a critical application item and references part numbers from The Boeing Company and UDT, Inc. The contract mandates strict adherence to technical and quality requirements, including sampling methods per MIL-STD-1916 or ASQ H1331 and preservation according to MIL-A-5503. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, respectively. Inspection and acceptance will occur at the destination. Award decisions will be based on best value, with a heavy emphasis on historical quality and delivery schedule compliance. Additionally, the contractor must meet Cybersecurity Maturity Model Certification (CMMC) Level 2 self-assessment requirements and utilize the Wide Area WorkFlow (WAWF) system for all invoicing and payment requests.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Commercial Animal Cremation Unit ManufacturerThis subcontract opportunity is for the fabrication and supply of one commercial-grade cremation unit intended for City of San Antonio Animal Care Services projects. The selected manufacturer will be responsible for the turnkey fabrication of an industrial incinerator system specifically designed to handle municipal shelter volumes, culminating in the delivery of the fully fabricated unit to the designated project site. The project is categorized under NAICS code 333995 and is associated with the City of San Antonio in Texas. Interested parties should note that the response deadline for this requirement is November 3, 2026.

POSTED

DEADLINE

Multi-turn valve actuator, stem, and pedestal

Solicitation # W912ES26QA004

Solicitation W912ES26QA004 is a Firm Fixed Price requirement issued by the Department of Defense, specifically the Army Corps of Engineers St. Paul District, for the procurement of one multi-turn valve actuator assembly. The equipment, intended for the Chippewa Diversion low flow channel at the Lac Qui Parle Project in Watson, Minnesota, consists of one multi-turn valve actuator, one rising stem, two stem guides, one stem cover, one pedestal, and two stem lift nuts. The government will be responsible for the installation of all components. This procurement is designated as a 100 percent Small Business Set-Aside under NAICS code 333995. Technical specifications require the electric actuator to meet AWWA C542 standards, with a specified worst-case Break-to-Open torque of 156 ft-lbs and a minimum 20 percent reserve capacity of 187 ft-lbs. The pedestal must be fabricated from S04/L316 stainless steel and adhere to strict safety factors for tensile strength, buckling, and unit stress, conforming to EM 1110-2-2610 and AWS welding standards. All products must be protectively processed for 12 months of indoor cold storage and marked according to MIL-STD-130 and MIL-STD-129. Delivery is required by March 31, 2027, with the final destination being the Lac Qui Parle Project site in Watson, Minnesota. Award will be based on the most advantageous offer considering price and past performance.

POSTED

DEADLINE

Military-Grade Vaneaxial Fan SupplierThis subcontract involves the supply of military-grade vaneaxial fans for prime contractors operating at the DDSP New Cumberland Facility. The supplier is responsible for manufacturing or sourcing fans that strictly adhere to MIL-PRF-18953 REV C specifications and ensuring all item and package marking complies with MIL-STD-129. Additionally, the contractor must guarantee that no mercury compounds are added to the products and provide necessary CAGE codes and test numbers to verify the Qualified Products List listing. The scope of work culminates in the delivery of properly marked and packaged vaneaxial fans along with the required QPL verification. This procurement falls under NAICS code 333995 and is managed by the Department of Defense. Interested parties must have responded by the deadline of October 13, 2026, for performance at the New Cumberland location.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Axial Fan Impeller SupplierThis subcontract, issued by the Department of Defense for the DDSP New Cumberland Facility, requires the manufacture or procurement of 18 axial fan impellers under NSN 4140016935361. The supplier must ensure all units meet strict technical specifications and comply with DFARS 252.223-7008 regarding the restriction of hexavalent chromium. Additionally, the contractor is responsible for providing Source Approval Request documentation in accordance with RC001. Logistical requirements mandate that items be packaged per ASTM D3951, marked according to MIL-STD-129, and palletized per RP001, with delivery terms set as FOB Origin. This opportunity is designated as a Total Small Business Set-Aside under NAICS code 333995. The performance of the contract will take place in New Cumberland, Pennsylvania.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

ACTUATOR,ELECTROMEC — 1680016993563 — SPRPA126QXB77

Solicitation # SPRPA1-26-Q-XB77

Solicitation SPRPA1-26-Q-XB77 is a fixed-price request for the procurement of one Electromechanical Actuator (NSN 1680-01-699-3563), issued by DLA Aviation at Philadelphia for the Department of the Navy. This item is designated as a Critical Safety Item (CSI) and is being solicited under Emergency Acquisition Notification authority. The government intends to make a single award based on the most advantageous offer, with past performance weighted as more important than price. Evaluation will include risk assessments via the Supplier Performance Risk System regarding item, price, and supplier performance. The contractor must adhere to strict quality and packaging standards, including ISO9001 compliance and MIL-STD-2073 for preservation. Markings must follow MIL-STD-130 and MIL-STD-129, with specific requirements for Depot Level Repairable labels and shelf-life markings. Delivery is required within 90 days FOB Destination to the DLA Distribution New Cumberland facility in Pennsylvania. Inspection and acceptance will occur at the origin. Invoicing must be processed electronically through the Wide Area Workflow system. The solicitation is set aside as a small business small purchase under NAICS code 333995.

Pa DLA Aviation At Philadelphia

POSTED

DEADLINE

CYLINDER,VENTED — 1720012857190 — SPRPA126RYD38

Solicitation # SPRPA1-26-R-YD38

Solicitation SPRPA1-26-R-YD38, issued by DLA Aviation at Philadelphia, is a negotiated procurement for Vented Cylinders (NSN 7RH 1720-01-285-7190, P/N 622259-1R). These components are designated as ALRE Critical Safety Items (CSI) and Flight Critical, meaning they are used in crucial shipboard systems for aircraft launch and recovery where failure could result in loss of life or vital systems. Consequently, only manufacturers with engineering source approval from the Naval Air Systems Command are eligible for award. New manufacturers may be subject to pre-award surveys and post-award conferences. Award will be made to a single responsible offeror based on a determination of the most advantageous proposal, with past performance weighted as more important than price. The contract mandates rigorous quality assurance and inspection protocols. The contractor is responsible for first article testing and production quality conformance inspections per NAWC-MISC-06-IS-0008. Critical and major characteristics, as well as attributes for plating, hardness, and non-destructive testing, require 100 percent inspection. Non-destructive testing must be performed by NADCAP or ISO 17025 accredited laboratories. The Naval Air Warfare Center Aircraft Division Lakehurst (NAWCADLKE) reserves the right to conduct QA surveillance for the first lot and subsequent lots, and the contractor must provide notification for both interim and final inspections. All hardware must be marked according to MIL-STD-130 and packaged in accordance with MIL-STD-2073. Invoicing and receiving reports must be processed electronically through the Wide Area Workflow (WAWF) system.

Pa DLA Aviation At Philadelphia

POSTED

DEADLINE

Tubeaxial Fan Assembly ManufacturerThis subcontract involves the manufacture and supply of tubeaxial fan assemblies for prime contractors supporting Defense Logistics Agency contracts. The selected provider must utilize precision metal fabrication equipment to produce items in strict accordance with TDP Rev A Gen 1 and the DLA Master List of Technical and Quality Requirements. Key compliance mandates include adherence to DFARS 252.223-7008 concerning Hexavalent Chromium and RQ011 for the removal of government identification. The project falls under NAICS code 333995 and is managed through the Department of Defense. Performance of the contract is located in Hampton, Virginia. Interested parties must respond by October 13, 2026, to provide the completed fan assemblies as specified in the technical requirements.

Defense Logistics Agency

POSTED

DEADLINE

Supply of Diaphragm Stop Valves (NSN 4820-01-438-2684)This subcontract, designated as a Total Small Business Set-Aside under NAICS code 333995, involves the manufacture or procurement of 10 diaphragm stop valves identified by NSN 4820014382684. These components are intended for prime contractors supporting Department of Defense hardware contracts for DLA Land and Maritime. The final delivery of the packaged and marked units is to be made to the DLA Distribution DSP New Cumberland facility. The contractor is responsible for strict adherence to military standards, specifically performing packaging according to MIL-STD-2073-1E and RP001, and marking in accordance with MIL-STD-129. Additionally, the scope of work requires the provision of Material Safety Data Sheets and hazard warning labels compliant with 29 CFR 1910.1200 for any hazardous materials involved.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Manufacturing of Actuating Cylinder Assemblies (NSN 3040-01-574-0083)This subcontract, managed by the Strategic Acquisition Program Directorate under the Department of Defense, involves the manufacturing of actuating cylinder assemblies identified by NSN 3040-01-574-0083. The selected provider will be responsible for fabricating cylinder components and assembling actuating mechanisms to support prime contractors on DLA supply contracts. All work must be performed using precision machining equipment suitable for hydraulic and pneumatic cylinders, with final deliverables consisting of completed, packaged, and labeled assemblies. Strict adherence to quality and logistics standards is required, specifically compliance with RA001 for technical and quality requirements and RP001 for packaging requirements. The opportunity was posted on September 29, 2026, with a response deadline of October 14, 2026. This procurement falls under NAICS code 333995.

STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

DEADLINE

Supply of Corrosion Resisting Steel Quick Disconnect CouplingsThis subcontract involves the manufacture and supply of 33 corrosion resisting steel quick disconnect coupling halves for the Department of Defense Fluid Handling Division. These components are intended for prime contractors working on DLA Land and Maritime fluid handling projects and must adhere to NSN 4730010950880 specifications, featuring 1/8 inch NPT male to quick male connections with an overall length of 1.500 inches. The project requires precision machining and strict compliance with FAR 52.211-5 material requirements. Performance will take place in New Cumberland, Pennsylvania, under NAICS code 333995. The solicitation was posted on September 29, 2026, with a response deadline of October 13, 2026.

FLUID HANDLING DIVISION

POSTED

5 days ago

DEADLINE

in 9 days

AI Contract Overview

This subcontract involves the supply of specialized hydraulic components, such as pumps, valves, cylinders, and hoses, to support prime contractors on Department of Defense and Naval logistics projects. The provider is responsible for sourcing and delivering high-precision fluid power components that strictly adhere to the Military Specifications and Commercial Item Descriptions outlined in the Technical Data Package. Managed under the Department of Defense through Navsup Weapon Systems Support Mech, the contract falls under NAICS code 333995. The procurement process began with a posting on September 2, 2026, and requires a response by October 2, 2026. All delivered components must be certified and sent directly to the prime manufacturer.

General Info

Supply specialized hydraulic components for DoD and Naval logistics projects per military specifications.

Agency

Department Of Defense → Navsup Weapon Systems Support Mech

NAICS

333995 - Fluid Power Cylinder and Actuator Manufacturing

Place of Performance

Set-Aside

NONE

Documents

This scope was carved out of N0010426QEF55.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

TABLE,LIFT,HYDRAULI

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed

PostedSep 2

subcontract

Response DeadlineOct 2

Deadline has passed

Submission Closed

10/02/2026, 08:30:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → Navsup Weapon Systems Support Mech

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → Navsup Weapon Systems Support Mech

Office AddressN/A

ContactsNo contact information available

Full Description

Supplies specialized hydraulic components, including cylinders, valves, pumps, and hoses, for prime contractors on DoD/Naval logistics projects. Sources and delivers high-precision fluid power components meeting Military Specifications and Commercial Item Descriptions (CID) cited in the Technical Data Package. Delivers certified hydraulic components to the prime manufacturer.