Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Hydraulic Manifold Rebuild Services

Active

Federal

Response Deadline08/26/2027, 09:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract for Hydraulic Manifold Rebuild Services involves the rebuild and assembly of Hydraulic Service Manifolds for prime contractors supporting NASA Langley Research Center facility projects. The scope of work includes the disassembly and cleaning of Model 294.12 manifolds, the installation of new seal kits, accumulators, and valves, and the integration of 15 GPM Servo Valves. These activities must be performed in a clean-room assembly environment using specialized hydraulic testing equipment to deliver rebuilt manifolds S/N 1297 and S/N 1349. Managed by the NASA Shared Services Center, the project is located in Hampton, Virginia, under NAICS code 332710. The contract was posted on August 24, 2026, with a response deadline of August 26, 2027.

General Info

Subcontract for rebuilding and assembling hydraulic manifolds for NASA Langley Research Center projects.

Agency

National Aeronautics And Space Administration → NASA Shared Services Center

NAICS

332710 - Machine Shops

Place of Performance

Hampton, VA, 23681, USA

Set-Aside

NONE

Documents

This scope was carved out of 80NSSC26941988Q.

The full solicitation package (2 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Repair and replacement of existing MTS lab Equipment

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedAug 24

subcontract

Response DeadlineAug 26

Submission deadline

Response Deadline

08/26/2027, 09:00:00 PM UTCin 10 months

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyNational Aeronautics And Space Administration → NASA Shared Services Center

ContactsNo contacts available

OfficeN/A

Organization / AgencyNational Aeronautics And Space Administration → NASA Shared Services Center

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs the rebuild and assembly of Hydraulic Service Manifolds (HSM) for prime contractors on NASA Langley Research Center facility projects. Disassembles and cleans Model 294.12 manifolds, installs new seal kits, accumulators, and valves, and integrates 15 GPM Servo Valves. Work requires a clean-room assembly environment and hydraulic testing equipment. Delivers rebuilt Hydraulic Service Manifolds S/N 1297 and S/N 1349.

Similar Contracts

Same NAICS industry code

Solicitation # SPE4A5-27-T-1972

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 11 hours ago

DEADLINE

Precision Machining & Component FabricationThis subcontract, titled Precision Machining and Component Fabrication, involves the production of replacement parts, brackets, and housings for gearbox radiator assemblies used in Department of the Army UH-60 helicopter projects. The scope of work requires the use of CNC machining, milling, and turning to process aerospace-grade alloys in strict accordance with form, fit, and function technical data. All deliverables must comply with the Buy American Statute to ensure the delivery of qualified machined replacement components. Managed by the Department of Defense under agency W6QK Acc-Rsa, this opportunity is designated as a Total Small Business Set Aside under NAICS code 332710. The solicitation was posted on October 27, 2026, with a response deadline set for December 1, 2026.

POSTED

about 16 hours ago

DEADLINE

in about 1 month

CONDUIT ASSEMBLY,ME

Solicitation # SPRMM127QGA28

SPRMM1 DLA Mechanicsburg

POSTED

about 16 hours ago

DEADLINE

U Bolt For Watervliet Arsenal

Solicitation # W911PT27QA021

POSTED

about 16 hours ago

DEADLINE

59--CHASSIS,ELECTRICAL-, IN REPAIR/MODIFICATION OF

Solicitation # N0010426QYAFE

Solicitation NO0014-26-Q-YAFE, issued by NAVSUP Weapon Systems Support, seeks quotations for the teardown, evaluation, repair, and potential modification of electrical chassis (NSN 7HH 5975-01-689-3871). The objective is to restore Government Furnished Property to an operable condition, defined as functioning and performing as a new unit. The requested Repair Turn Around Time (RTAT) is 39 days, and the government reserves the right to exercise an option for increased quantity up to 100 percent of the initial requirement within 365 days of award. The closing date for submissions is October 23, 2026, at 4:30 PM local time. Offerors must provide an estimated repair price for the full effort and include the cost of new items for evaluation purposes. Following the receipt of carcasses, vendors have 90 days to complete a teardown and evaluation before submitting a firm-fixed-price quote. If the offeror is not the Original Equipment Manufacturer, they must provide the OEM's name, CAGE code, and a signed letter of authorization. Technical requirements include strict adherence to MIL-STD-130 for marking, MIL-STD-2073-1 for packaging, and a total prohibition of metallic mercury. Award evaluations will consider price, capacity constraints, and risk assessments via the Supplier Performance Risk System. All payments will be processed electronically through the Wide Area Workflow system.

Navsup Weapon Systems Support Mech

POSTED

about 16 hours ago

DEADLINE

in about 1 month

Supply of Custom Cut A1111BS ComponentsThis subcontract involves the supply of 200 custom-cut A1111BS hardware components for prime contractors working on California Highway Patrol radio system projects. Each component must be cut to a specific length of 16.5 inches and must be a new, latest-model product currently in production. The procurement is managed under NAICS code 332710 for the Department of the California Highway Patrol. The solicitation was posted on October 26, 2026, with a response deadline of November 9, 2026.

Department of the California Highway Patrol

POSTED

DEADLINE

Supply of Certified Materials for CB Safety DeviceThis subcontract involves the supply of certified raw materials, including metals, plastics, and electrical components, for the CB Safety Device under the Navsup Weapon Systems Support Mech. All provided materials must strictly adhere to TDP Version 011 properties and be guaranteed free of mercury and hexavalent chromium. The supplier is responsible for delivering these materials to the manufacturer along with necessary certifications of conformance and material test reports. Managed by the Department of Defense under NAICS code 332710, the opportunity was posted on October 26, 2026, with a response deadline of November 23, 2026. The primary objective is to ensure that prime contractors receive high-quality, compliant raw materials that meet rigorous military specifications for weapon systems support.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Manufacturing of USMA Breast and Waist PlatesThis small business set-aside subcontract involves the fabrication, polishing, and finishing of military insignia buckles, specifically USMA breast and waist plates, for prime contractors supporting the Department of Defense at W6QM Micc-West Point. The scope of work requires the use of precision stamping or casting equipment to drape waistplates to a 3.5 inch radius, applying mirror-polished fronts with matte backs and edges, and adding necessary identification markings. All production must strictly adhere to MIL-B-1563, MIL-DTL-1563/12B, and MIL-DTL-1563/13B standards. The project is categorized under NAICS code 332710 and will be performed in West Point, New York. Interested parties should note the tight turnaround for responses, with a posting date of October 26, 2026, and a deadline of October 29, 2026. The final deliverable consists of fully finished and packaged breast and waist plates meeting all specified military requirements.

W6QM Micc-West Point

POSTED

DEADLINE

Component Parts Fabrication for Modification Kit, AIThis subcontract through DLA Aviation involves the manufacture of individual component parts for aviation modification kit projects. The selected provider will be responsible for the machining, fabrication, and forming of aviation-grade alloys, specifically delivering finished component parts for NSN 1680-01-673-9058. Work must be performed using precision CNC machining and rigorous quality control inspection equipment to ensure all parts meet strict military specifications. To be eligible, contractors must hold AS9100 or ISO 9001 certification. This opportunity falls under NAICS code 332710 and is managed by the Department of Defense. Interested parties must submit their responses by November 2, 2026.

POSTED

DEADLINE

Hydraulic Cylinder Rebuild & Precision Machining

Puget Sound Naval Shipyard IMF

POSTED

DEADLINE

in about 24 hours

Precision Machining of Valve Stem GuidesThis subcontract involves the precision machining and fabrication of 54 Valve Stem Guides for prime contractors supporting Navsup Weapon Systems Support Mechanicsburg projects. The contractor must manufacture components according to TDP Version No. 008 specifications using SAE AMS 5643 material, with a strict prohibition against the cold-forming of internal threads. Additionally, the contractor is responsible for executing production representative specimens for First Article Testing. To qualify for this project, the provider must hold ISO-9001 and ISO-10012 certifications, as well as mercury-free certification. The opportunity is categorized under NAICS code 332710 and is associated with the Department of Defense. Responses for this requirement are due by December 3, 2026.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

in about 1 month

SERVOVALVE,AIRCRAFT

Solicitation # SPRPA127QVA04

Solicitation SPRPA127QVA04 is issued by the Defense Logistics Agency (DLA) Aviation office in Philadelphia for the procurement of aircraft servovalves. This fixed-price solicitation, issued under Emergency Acquisition Flexibilities, requires delivery within 90 days. The government intends to make a single award based on a primary evaluation of past performance and a secondary evaluation of price. The contracting officer will also utilize the Supplier Performance Risk System (SPRS) to assess item, price, and supplier risks. The contract mandates strict adherence to military standards for packaging and marking, specifically MIL-STD-2073-1 for preservation, MIL-STD-129 for marking, and MIL-STD-130 for item unique identification. Inspection and acceptance will occur at the origin. All invoicing and payment processing must be conducted electronically through the Wide Area Workflow (WAWF) system. Compliance with the Buy American Act, cybersecurity standards under DFARS 252.204-7012, and specific requirements for Critical Safety Items (CSI) and Engineering Change Proposals are required. Offerors must be registered in the System for Award Management (SAM) and are encouraged to provide economic purchase quantity recommendations and current price lists to establish fair and reasonable pricing.

Pa DLA Aviation At Philadelphia

POSTED

DEADLINE

More opportunities from National Aeronautics And Space Administration → NASA Shared Services Center

Same awarding agency

Laboratory Instrument Installation and CalibrationThis subcontract, titled Laboratory Instrument Installation and Calibration, involves the physical installation, setup, and calibration of the THW-L1S system for prime contractors supporting NASA Marshall Spaceflight Center projects. The scope of work includes transporting and positioning equipment within Lab 105E of Building 4205, establishing power and temperature control connections, and performing precise calibrations for volumetric specific heat and thermal conductivity measurements. Managed by the NASA Shared Services Center under NAICS code 811310, the project requires personnel with specific security clearance for access to Building 4205. The final deliverable is a fully commissioned and calibrated system. The solicitation was posted on October 27, 2026, with a response deadline of October 30, 2026.

Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

about 16 hours ago

DEADLINE

External Chiller/Heater Unit Supply and IntegrationThis subcontract through the NASA Shared Services Center involves the supply and integration of an external chiller/heater unit for laboratory projects at the NASA Marshall Spaceflight Center. The primary objective is to provide a temperature control unit capable of operating between -50°C and 200°C, which must be integrated with the THW-L1S instrument to ensure stable temperatures during propellant measurements. The contractor is responsible for delivering a fully operational integrated system that adheres to all technical and safety specifications required for Lab 105E. This procurement falls under NAICS code 333413 and is intended to support prime contractors in meeting the rigorous environmental control standards of the facility.

Industrial and Commercial Fan and Blower and Air Purification Equipment Manufacturing

POSTED

about 16 hours ago

DEADLINE

NV6000 to NV9000 Profiler Series UpgradeThis subcontract involves performing technical hardware and software upgrades for prime contractors on NASA/NSSC projects located at the Marshall Space Flight Center in Huntsville. The primary scope of work includes the removal of legacy NV6000 components and the installation of NV9000 series upgrade components, specifically part number 6311-0908-01, followed by comprehensive system calibration and verification to deliver a fully operational NV9000 Series Profiler. To qualify for this project, the contractor must hold OEM certification for Zygo system upgrades and maintain strict compliance with all NASA/MSFC facility access and safety requirements. The project is categorized under NAICS code 811219 and is managed through the NASA Shared Services Center.

Other Electronic and Precision Equipment Repair and Maintenance

POSTED

about 16 hours ago

DEADLINE

Peripheral Kit for Zygo Metrology SystemsThis subcontract involves the procurement of a specialized 6300-0239-53 Peripheral Kit intended for use by prime contractors on NASA/NSSC metrology projects. The hardware is specifically designed for integration with existing Zygo Metrology Systems and will be utilized at the Marshall Space Flight Center in Huntsville. The contract requires the delivery of one completed peripheral kit that adheres to NASA/MSFC receiving standards for commercial items in accordance with FAR Part 12. Managed under NAICS code 334519, the project is overseen by the NASA Shared Services Center.

Other Measuring and Controlling Device Manufacturing

POSTED

about 16 hours ago

DEADLINE

NIST-Traceable Calibration Equipment Provider

Other Commercial and Industrial Machinery and Equipment Rental and Leasing

POSTED

about 16 hours ago

DEADLINE

AMS 2750H Vacuum Furnace Calibration Services

Electronic and Precision Equipment Repair and Maintenance

POSTED

about 16 hours ago

DEADLINE

Transient hot wire liquid thermal conductivity meter to support material compatibility and property testing for explosive materials.

Solicitation # 80NSSC27946410Q

NASA Shared Services Center is seeking a transient hot wire liquid thermal conductivity meter to support material compatibility and property testing for explosive materials, specifically to advance the understanding of low-toxicity monopropellants. The requirement is for a Thermtest THW-L1S unit capable of measuring thermal conductivity, thermal diffusivity, and volumetric specific heat of liquids and phase change materials. Technical specifications include a temperature range of at least -50C to 200C, ASCENT compatible wetted surfaces, the ability to measure samples across a range of viscosity, and integration capabilities for an external chiller or heater unit. Performance will take place at Lab 105E in Building 4205 at the Marshall Space Flight Center, with testing scheduled to begin in the winter of 2026. This procurement is being conducted under NAICS code 334519 as a commercial item acquisition following FAR Part 12. NASA intends to issue a sole source contract to Thermtest Inc, as they have been determined to be the sole provider of the required equipment. This notice is currently a request for capability statements rather than price quotes to determine if the procurement can be conducted on a competitive basis. Interested organizations must submit their qualifications to the identified points of contact by 8:00 a.m. CST on October 30, 2026. All submissions must reference the notice ID, and oral communications are not permitted.

Other Measuring and Controlling Device Manufacturing

POSTED

about 16 hours ago

DEADLINE

Vision Technologies Installation Services KSC

Solicitation # 80NSSC26946930Q

Computer Systems Design Services

POSTED

about 16 hours ago

DEADLINE

Yateks 3D video borescope system

Solicitation # 80NSSC27946179Q

Solicitation 80NSSC27946179Q is a firm-fixed-price contract opportunity issued by the NASA Shared Services Center for the procurement of a Yateks 3D video borescope system for the Goddard Space Flight Center. This is a brand-name requirement specifically for the Yateks Realta 3D system, which includes the iShot Imaging E Series Monitor Kit (PN: EM10418). The system was selected for its specialized capabilities, including motorized 360-degree articulation, forward-facing stereo 3D measurement, and full-HD imaging. The procurement is set aside for small businesses under NAICS code 334519, with delivery expected within one to two weeks after receipt of order. Shipping is FOB Destination to Greenbelt, Maryland. The award will be granted based on the lowest price technically acceptable (LPTA) criteria. To be eligible, responses must be submitted by authorized resellers only and must include a letter of authorization and proof of manufacturer pricing. Offerors must be registered in the System for Award Management (SAM) and include their CAGE code or Unique Entity ID on the proposal. All quotes are due by October 22, 2026, and must be submitted via email to Cody Guidry. The contract includes specific requirements for duty-free entry marking and strict compliance with U.S. export control laws, including ITAR and EAR regulations.

Other Measuring and Controlling Device Manufacturing

POSTED

about 16 hours ago

DEADLINE

in about 16 hours

NCS Customized Flex-11 Security Cabinet (CITM AUTH REQUIRED PRIOR TO AWARD)

Solicitation # 80NSSC26946481Q

Solicitation 80NSSC26946481Q is a firm-fixed-price request for quotation issued by the NASA Shared Services Center for the procurement of two TAA-compliant NCS Customized Flex-11 Security Cabinets and associated accessories. The required hardware includes electronic keypad locks with physical overrides, eleven Corning Fiber Optic Cables, seventeen Blackbox-KVM Extender Kits over Fiber supporting dual monitors and DisplayPort 4K, and Corning Closet Connector Housing. This is a delivery-only requirement with no installation services included, and equivalent cabinets are not accepted. The place of performance is the AEGIS facility at the NASA Marshall Space Flight Center in Huntsville, Alabama, with delivery terms specified as FOB Destination. This procurement is set aside for small businesses under NAICS code 312111, and all offerors must be registered in the System for Award Management. The government will award the contract based on the lowest price technically acceptable (LPTA) criteria, provided the offeror demonstrates the ability to meet all technical requirements. The period of performance is six weeks after receipt of order. Quotes must be submitted via email to the primary point of contact by October 26, 2026. Contractors are required to comply with U.S. export control laws, including ITAR and EAR, and must adhere to specific packaging and marking requirements for duty-free entry of foreign supplies.

Soft Drink Manufacturing

POSTED

about 16 hours ago

DEADLINE

Solicitation # 80NSSC27948060Q

The NASA Shared Services Center is pursuing a sole source procurement under FAR 12.102(a) to award a contract to Zygo Corporation for the upgrade of an existing NewView 6000 series optical profiler to the NewView 9000 series. This upgrade is critical for improving metrology capabilities used to measure micrometeoroid impacts, which directly informs the architecture of the Habitable Worlds Observatory. The government has determined that Zygo Corporation is the only authorized provider capable of performing this work due to their proprietary knowledge of the control systems and the need to mitigate technical risks associated with system incompatibility. The scope of work includes the procurement of a NewView 9000 series optical head, electronics, staging, a Core Ultra i7 System Controller with 32 GB DDR5 SDRAM, a 5-axis motorized system, and various specialized lenses and turrets. Additionally, the contract covers 16 hours of on-site installation labor at the NASA Marshall Space Flight Center in Huntsville, Alabama, and requires a Certificate of Calibration utilizing ISO-17025 traceability. The estimated lead time for delivery is 8 to 10 weeks after receipt of order, with an additional 3 to 4 weeks for installation. This acquisition is conducted as a commercial item procurement under FAR Part 12 and includes the NASA FAR Supplement Clause 1852.215-84 regarding the Ombudsman.

Other Measuring and Controlling Device Manufacturing

POSTED

about 16 hours ago

DEADLINE

Purchase of Haynes alloy sheet

Solicitation # 80NSSC27945835Q

The NASA Shared Services Center, acting for the NASA Glenn Research Center, is soliciting the purchase of proprietary Haynes alloy sheets, specifically Haynes 230, 233, 282, and 244. This procurement is conducted as a Brand Name Justification because the materials are proprietary to Haynes International and remain within the patent timeframe. Consequently, the government intends to negotiate exclusively with vendors capable of providing the subject brand name materials. The contract is designated as a total Small Business Set Aside under NAICS code 331491. Technical requirements mandate that all deliverables include the OEM name and lot numbers, along with certification and verification of AMS specifications regarding chemistry and mechanical properties. The estimated lead time for delivery is three months, with the place of performance located in Cleveland, Ohio. All bids must be submitted as PDF documents by the deadline of October 26, 2026. Quotes must include the cost per piece or unit to be considered for award. The primary point of contact for this effort is Cara Craft, and the contracting officer is Karen Artia.

Nonferrous Metal (except Copper and Aluminum) Rolling, Drawing, and Extruding

POSTED

about 16 hours ago

DEADLINE

Earlier notices in this NAICS code

Posted before this notice, open and closed

Hydraulic Cylinder Remanufacturing Services

NASA Shared Services Center

POSTED

DEADLINE

High-Cleanliness Component Processing

Navsup Weapon Systems Support Mech

POSTED

CLOSED

about 1 month ago

Precision Machining of Transfer Unit Housing

Ga DLA Aviation At Warner Robins

POSTED

CLOSED

about 1 month ago

Precision Machining of M19 Firing Attachment Components

POSTED

CLOSED

about 1 month ago

Precision Tooling Manufacturing – G Stops and Clamping Squares

DLA Maritime - Puget Sound

POSTED

CLOSED

49--TEST PROGRAM SET, IN REPAIR/MODIFICATION OF

Solicitation # N0038326QFB16

Navsup Weapon Systems Support

POSTED

CLOSED

about 1 month ago

Solicitation # N0016426Q0296

POSTED

CLOSED

49--TEST PROGRAM SET, IN REPAIR/MODIFICATION OF

Solicitation # N0038326QFB18

Navsup Weapon Systems Support

POSTED

CLOSED

about 1 month ago

Solicitation # N6426726Q4227

Naval Surface Warfare Center

POSTED

CLOSED

about 2 months ago

66--KIT,CPU,AWTS,AIRCRA - AND OTHER REPLACEMENT PARTS, IN REPAIR/MODIFICATION OF

Solicitation # N0038326QPC64

Navsup Weapon Systems Support

POSTED

CLOSED

about 1 month ago

SHAFT, SHOULDERED

Solicitation # SPE7L1-26-T-01N4

Defense Logistics Agency

POSTED

CLOSED

about 2 months ago

Solicitation # SPE4A7-26-T-687G

Defense Logistics Agency

POSTED

CLOSED

about 2 months ago

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS