HYDROGEN PEROXIDE

HYDROGEN PEROXIDE
HYDROGEN PEROXIDE, 30% SOLUTION ACS GRADE
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL IDENTIFICATION/BARE ITEM MARKING
RQ034: HAZARDOUS COMMUNICATION STANDARD NOTICE
"SDS AND OSHA HAZARD WARNING/PRODUCT LABEL (HWL) ARE REQUIRED. THE SDS
AND HAZARD WARNING LABEL MUST BE REVIEWED AND APPROVED BY
CHEMISTS/TECHNICAL PERSONNEL BEFORE CONTRACT AWARD. THE APPROVED SDS AND
LABEL MUST THEN BE PLACED IN THE CONTRACT FILE AND A COPY FORWARDED TO
THE DLA AVIATION HMIRS OFFICE (VBA)."
ORIGINAL MANUFACTURER'S UNIT PACKAGING
IS REQUIRED. REPACKAGING IS NOT
AUTHORIZED.
THIS ITEM IS IDENTIFIED AS A COMMERCIAL OFF THE SHELF (COTS) ITEM
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
RS011: Shelf-life requirement RS001 for a TYPE I (CODE H) item with a shelf life of 12 months (non-extendable) applies to this item.
HYDROGEN PEROXIDE, ACS 1/4 LB (113.4 GRAMS)
SHELF LIFE APPLIES TYPE I, SLC H 12-MONTHS. NOT MORE THAN 2 MONTHS
SHALL HAVE ELAPSED FROM DATE OF MANUFACTURE TO DATE OF DELIVERY TO THE
GOVERNMENT. MARKINGS ON ALL CONTAINERS SHALL INCLUDE THE LOT (CONTROL)
NUMBER AND DATE OF MANUFACTURE PREFIXED BY "MFD".
SPE4A6-27-T-1515
SECTION B
AVANTOR PERFORMANCE MATERIALS, INC. P/N: 5240-02 CAGE: 70829
UNIT OF ISSUE = BOTTLE (BT), ONE BT CONTAINS 4 OZ (113.4 GRAMS, 1/4/LB)
AVANTOR PERFORMANCE MATERIALS, 70829 P/N 5240-02
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7018621386 0001 BT 6.000
NSN/MATERIAL:6810002998506
DELIVERY (IN DAYS):0020
DELIVER FOB: DESTINATION
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:HM CLNG/DRY:1 PRESV MAT:ZZ
WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:Z
UNIT CONT:ZZ OPI:M
INTRMDTE CONT:ZZ INTRMDTE CONT QTY:ZZZ
PACK CODE:Z PACKING LEVEL: B
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:ZZ -ZZ Special Requirements
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
CLAUSE 52.247-9012 (REQUIREMENTS FOR TREATMENT OF WOOD PACKAGING MATERIAL (WPM)) SHALL BE MANDATORY FOR ALL SHIPMENTS PACKED IN WOODEN BOXES, CRATES, ETC., AND/OR UNITIZED ON WOODEN PALLETS. HEAT TREATMENT OR KILN-DRIED HEAT TREATMENT OF WPM SHALL BE THE ONLY METHODS AUTHORIZED FOR SHIPMENT TO DOD LOCATIONS. ADDITIONAL INFORMATION REGARDING DOD'S WPM REQUIREMENT IS AVAILABLE ON THE DLA PACKAGING WEBSITE: HTTP://WWW.LANDANDMARITIME.DLA.MIL/ OFFICES/PACKAGING/PALLETIZATIONWPMNOTICE.ASP.
APPLICABLE TO ALL MEDICAL ACQUISITIONS:
PACKAGING AND PACKING SHALL BE COMMERCIAL AS SPECIFIED IN THE PROCUREMENT DOCUMENT.
EACH COMPLETE UNIT SHALL BE PROPERLY PACKAGED IN A SUITABLE SEALED UNIT CONTAINER CAPABLE OF PROTECTING THE CONTENTS FROM DAMAGE AND/OR BREAKAGE.
SPE4A6-27-T-1515
SECTION B
PR: 7018621386 PRLI: 0001 CONT’D
UNITS SHALL BE PACKED IN SUITABLE COMMERCIAL
EXTERIOR (SHIPPING) CONTAINERS (EXPORT WHEN
NECESSARY) WHICH SHALL INSURE ACCEPTANCE AND
SAFE DELIVERY BY COMMON OR OTHER CARRIER, AT
THE LOWEST RATE, TO POINT OF DELIVERY CALLED
FOR IN THE CONTRACT OR ORDER.
MATERIAL MUST BE MARKED IAW MEDICAL MARKING
STANDARD NO. 1. THIS SUPERCEDES ALL REFERENCES
TO MIL-STD-129.
COPIES OF MEDICAL MARKING STANDARD NO. 1
(MMS NO. 1) MAY BE OBTAINED BY CONTACTING DLA
TROOP SUPPORT VIA EMAIL TO fssb@dla.mil. MMS NO. 1 IS ALSO AVAILABLE ONLINE AT: https://www.dla.mil/Logistics-Operations/Packaging/
IP025: PACKAGING, MARKING, AND SHIPPING OF HAZARDOUS MATERIALS
APPLICABLE TO ALL MEDICAL ACQUISITIONS:
PACKAGING AND PACKING SHALL BE COMMERCIAL AS
SPECIFIED IN THE PROCUREMENT DOCUMENT.
EACH COMPLETE UNIT SHALL BE PROPERLY PACKAGED
IN A SUITABLE SEALED UNIT CONTAINER CAPABLE
OF PROTECTING THE CONTENTS FROM DAMAGE AND/OR
BREAKAGE.
UNITS SHALL BE PACKED IN SUITABLE COMMERCIAL
EXTERIOR (SHIPPING) CONTAINERS (EXPORT WHEN
NECESSARY) WHICH SHALL INSURE ACCEPTANCE AND
SAFE DELIVERY BY COMMON OR OTHER CARRIER, AT
THE LOWEST RATE, TO POINT OF DELIVERY CALLED
FOR IN THE CONTRACT OR ORDER.
MATERIAL MUST BE MARKED IAW MEDICAL MARKING
STANDARD NO. 1. THIS SUPERCEDES ALL REFERENCES
TO MIL-STD-129.
COPIES OF MEDICAL MARKING STANDARD NO. 1
(MMS NO. 1) MAY BE OBTAINED BY CONTACTING DLA
TROOP SUPPORT VIA EMAIL TO fssb@dla.mil. MMS NO. 1 IS ALSO AVAILABLE ONLINE AT: https://www.dla.mil/Logistics-Operations/Packaging/
BULK BREAK POINT:
WK4F8Q
W6Y1 USALRCTR BAVARIA
AWCF SSF 405TH AFSB EUR
ROSE BARRACKS SOUTH CAMP BLDG 113
VILSECK 92249
DE
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
WK4F8Q
W6Y1 USALRCTR BAVARIA
SPE4A6-27-T-1515
SECTION B
PR: 7018621386 PRLI: 0001 CONT’D
AWCF SSF 405TH AFSB EUR
ROSE BARRACKS SOUTH CAMP BLDG 113
VILSECK 92249
DE
MARKFOR
WK4F8Q
W6Y1 USALRCTR BAVARIA
AWCF SSF 405TH AFSB EUR
ROSE BARRACKS SOUTH CAMP BLDG 113
VILSECK 92249
DE
M/F: (TCN) WK4F8Q62600542
RDD: 275
PROJ: TP 2
SUPP ADD: W9046W SIG: C
FOR GOVERNMENT USE ONLY: (IPD) 05
DIC: A01 DIST: V ADV: FC: Z9
Need Ship Date:00/00/0000 Original Required Delivery Date:09/29/2026
SPE4A6-27-T-1515 NSN/Part Number: 6810-00-299-8506 Quantity: 6 BT Purchase Request: 7018621386QTY: 6 Delivery: 20 days ADO