HYDROGEN PEROXIDE TOPI
Contract Overview
Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.
AI Contract Overview
Hydrogen Peroxide Topical Solution USP RP001 is a 3% stabilized solution intended for external topical use only, not for ingestion or application to the eyes or large body areas, and must not be used for more than one week. Each unit of issue is a 473-milliliter bottle, requiring tight closure, storage at controlled room temperature, protection from freezing and excessive heat, and must not be shaken. Labeling and packaging must strictly comply with Medical Marking Standard No. 1A dated February 4, 2013, superseding MIL-STD-129, and all packaging must be commercially sealed and designed to prevent damage during transport. The item is regulated by the FDA and classified as a TYPE I (CODE M) item with a non-extendable shelf life of 24 months. As a hazardous material under OSHA’s revised Hazard Communication Standard effective June 1, 2015, suppliers must provide Safety Data Sheets (SDS) and compliant HCS labels per 29 C.F.R. 1910.1200, and must train employees on these requirements. The contract mandates delivery within 20 days to FPO AP 96693, FOB destination, with zero variance in quantity, and prohibits parcel post in favor of traceable shipping methods. The NSN is 6505-00-153-8480, with a contracted quantity of two bottles, procured under solicitation SPE2DP-26-T-4481, and all technical and quality requirements are governed by the DLA Master List, which supersedes ASTM D3951. Approved manufacturers include Medline Industries, LP, Cardinal Health 200, LLC, and McKesson Medical-Surgical Government, with the item identified by multiple NDC and part numbers. All deliveries must be palletized per RP001 requirements and marked per Medical Marking Standard No. 1.
General Info
Agency
NAICS
Place of Performance
UNIT 100381 BOX 1, FPO, AP, 96693, USSet-Aside
Documents
(1)AI Contract Breakdown
Uniform Contract FormatWhat is UCF?
Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.
Timeline
Response Deadline
Organization & Contact Information
Full Description
Cancel all requisitions without replacement DMLIIS Request ID 1721935 has been approved by the services to change from ACC -L to ACCY. Letitia McMillan Letitia.Mcmillan@dla.mil
HYDROGEN PEROXIDE TOPICAL SOLUTION,USP RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
. OVER THE COUNTER (OTC).. ROUTE OF ADMINISTRATION: TOPICAL. FOR
EXTERNAL USE ONLY.. DO NOT USE IN EYES OR APPLY OVER LARGE AREAS OF THE
BODY. DO NOT USE LONGER THAN 1 WEEK.. CONTAINS 3% HYDROGEN PEROXIDE
(STABILIZED) AS THE ACTIVE INGREDIENT.. UNIT OF ISSUE IS A BOTTLE
CONTAINING 473 MILLILITERS (16 FLUID OUNCES OR 1 PINT).. KEEP TIGHTLY
CLOSED AND AT CONTROLLED ROOM TEMPERATURE. DO NOT SHAKE BOTTLE. HOLD
AWAY FROM FACE WHEN OPENING. PROTECT FROM FREEZING AND AVOID EXCESSIVE
HEAT.. LABELING AND MARKING MUST IN ACCORDANCE WITH MEDICAL MARKING
STANDARD NO. 1A DATED 4 FEBRUARY 2013. 11/25/2015..
This device or drug is regulated by the FDA. Note to Buyers: The contracting official shall send a referral in EBS to the product specialist for confirmation. Please include bidder name and bidder contact information, manufacturer name, manufacturer part number, and item description. 1 BT = 473 ML Hazard Communication Standard Notice:
Effective June 1, 2015, Federal Standard No. 313-E, Material Safety Data, Transportation Data and Disposal Data for Hazardous Materials Furnished to Government Activities, establishes the requirement for preparation and submission of Safety Data Sheets (SDS) in lieu of Material Safety Data Sheets (MSDS) by suppliers who provide hazardous materials to government activities.
The Occupational Safety and Health Administration (OSHA) has modified its Hazard Communication Standard (HCS) to conform to the United Nations Globally Harmonized System of Classification and Labeling of Chemicals. As a result of this change, GSA revised Federal Standard No. 313-E requiring Safety Data Sheets for classifying chemicals and communicating the applicable information on labels.
In accordance with the revised standard after June 1, 2015:
1. Suppliers will be required to submit, to the contracting officer for review and approval prior to award, safety data sheets consistent with the requirements found at 29 C.F.R. 1910.1200 for hazardous materials delivered to the Government.
SPE2DP-26-T-4481
SECTION B
2. Suppliers will also be required to submit, to the contracting officer for review and approval prior to award, Hazardous Communication Standard (HCS) labels in accordance with 29 C.F.R. 1910.1200 requirements or current Consumer Product Safety Act (CPSA), Federal Hazardous Substance Act (FHSA) labels when subject to labeling requirements under those statutes. This product labeling is required for hazardous materials delivered to the Government.
3. Finally, suppliers must train their employees on the new safety data sheets, hazardous communication labels, and requirements of 29 C.F.R. 1910.1200.
For more information on SDS, refer to OSHAs website, available at:
https://www.osha.gov/law-regs.html
For information on 29 C.F.R. 1910.1200, refer to the below link:
https://www.osha.gov/dsg/hazcom/index.html
APPLICABLE TO ALL MEDICAL ACQUISITIONS:
PACKAGING AND PACKING SHALL BE COMMERCIAL AS SPECIFIED IN THE PROCUREMENT DOCUMENT.
EACH COMPLETE UNIT SHALL BE PROPERLY PACKAGED IN A SUITABLE SEALED UNIT CONTAINER CAPABLE OF PROTECTING THE CONTENTS FROM DAMAGE AND/OR BREAKAGE.
UNITS SHALL BE PACKED IN SUITABLE COMMERCIAL EXTERIOR (SHIPPING) CONTAINERS (EXPORT WHEN NECESSARY) WHICH SHALL INSURE ACCEPTANCE AND SAFE DELIVERY BY COMMON OR OTHER CARRIER, AT THE LOWEST RATE, TO POINT OF DELIVERY CALLED FOR IN THE CONTRACT OR ORDER.
MATERIAL MUST BE MARKED IAW MEDICAL MARKING STANDARD NO. 1. THIS SUPERCEDES ALL REFERENCES TO MIL-STD-129.
COPIES OF MEDICAL MARKING STANDARD NO. 1 (MMS NO. 1) MAY BE OBTAINED BY CONTACTING DLA TROOP SUPPORT VIA EMAIL TO fssb@dla.mil. MMS NO. 1 IS ALSO AVAILABLE ONLINE AT: https://www.dla.mil/Logistics-Operations/Packaging/
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
.
SHALL BE MARKED IAW THE LATEST EDITION OF
THE MEDICAL MARKING STANDARD NO. 1.
MMS NO. 1 IS AVAILABLE ONLINE AT:
https://www.dla.mil/Logistics-Operations/Packaging/
RS016: Shelf-life requirement RS001 for a TYPE I (CODE M) item with a shelf life of 24 months (non-extendable) applies to this item.
MEDLINE INDUSTRIES, LP 0PMN3 P/N MDS098001H MEDLINE INDUSTRIES, LP 0PMN3 P/N NDC53329-0981-06 CARDINAL HEALTH 200, LLC 07TA6 P/N NDC3720-50871-43 MCKESSON MEDICAL-SURGICAL GOVERNMENT 1EU19 P/N 142779 MCKESSON MEDICAL-SURGICAL GOVERNMENT 1EU19 P/N 23-D0012 MCKESSON MEDICAL-SURGICAL GOVERNMENT 1EU19 P/N NDC68599-2301-06
SPE2DP-26-T-4481
SECTION B
PR: 7017722358 PRLI: 0001 CONT’D
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017722358 0001 BT 2.000
NSN/MATERIAL:6505001538480
DELIVERY (IN DAYS):0020
DELIVER FOB: DESTINATION
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313,
PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025.
IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH
FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE
WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
R20121
USS ZUMWALT DDG 1000
UNIT 100381 BOX 1
FPO AP 96693
US
VESSEL SHIPMENT. TRANSPORTATION SEE DLAD PROC NOTE C19. FIRST DESTINATION TRANSPORTATION SEE DLAD PROC
NOTE C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
R20121
USS ZUMWALT DDG 1000
DLA VENDORS: USE VSM FOR
US
RDD 777 SHIPMENT. SHIP BY FASTEST TRACEABLE MEANS. DO NOT USE PARCEL POST.
SPE2DP-26-T-4481
SECTION B
PR: 7017722358 PRLI: 0001 CONT’D
M/F: (TCN) R201216213HM43
RDD: 777
PROJ: EK5 TP 2
SUPP ADD: YNHM01 SIG: A
FOR GOVERNMENT USE ONLY: (IPD) 06
DIC: A4A DIST: 9B ADV: 2A FC: NC
Need Ship Date:00/00/0000 Original Required Delivery Date:08/06/2026
SPE2DP-26-T-4481 NSN/Part Number: 6505-00-153-8480 Quantity: 2 BT Purchase Request: 7017722358QTY: 2 Delivery: 20 days ADO
Similar Contracts
Same NAICS industry code
More opportunities from Department Of Defense → MEDICAL SUPPLY CHAIN PHARM FSA
Same awarding agency
