Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Hypodermic Insulin Syringe and Needle Manufacturing

Active

Federal

Response Deadline10/20/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves the manufacturing of hypodermic insulin syringes for prime contractors supporting Department of Defense medical supply contracts through the Medical Supply Chain MD Surg FSF. The required products are 1 ML capacity syringes featuring permanently attached 28 GA needles and single scale barrels, with a strict requirement that dead space does not exceed 1 unit. Production must take place in FDA Class II regulated facilities using medical-grade plastics and stainless steel. Finished syringes must be delivered in strips of 10 and larger packages of 100, maintaining a shelf life of 60 months. The performance of this contract is designated for FPO 96662 under NAICS code 339112. Interested parties should note the response deadline of October 20, 2026.

General Info

Manufacturing 1ML insulin syringes for DoD; FDA Class II; deadline October 20, 2026.

Agency

Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF

NAICS

339112 - Surgical and Medical Instrument Manufacturing

Place of Performance

FPO, AP, 96662, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE2DS-27-T-0683.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

SYRINGE AND NEEDLE, HYP

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 14

subcontract

Response DeadlineOct 20

Submission deadline

Response Deadline

10/20/2026, 05:00:00 PM UTCin 4 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Manufactures hypodermic insulin syringes for prime contractors on DLA medical supply contracts. Produces 1 ML capacity syringes with permanently attached 28 GA needles and single scale barrels, ensuring dead space does not exceed 1 unit. Utilizes medical-grade plastics and stainless steel in FDA Class II regulated facilities. Delivers finished syringes packaged in strips of 10 and packages of 100 with a 60-month shelf life.

Similar Contracts

Same NAICS industry code

Operational Medicine Test and Evaluation Cell Salvage Supplemental - (AFMEDCOM)

Solicitation # FA800326SS004

FA8003 771 Enterprise Sourcing Squadron

POSTED

about 6 hours ago

DEADLINE

in about 1 month

IV Fluid Administration Set SupplierThis subcontract through the Department of Defense Medical Supply Chain MD SURG FSF requires the manufacture or distribution of sterile, FDA-regulated intravenous fluid administration sets for prime contractors. The required equipment must feature universal spikes, slide or roller clamps, backcheck valves, Caresite valve injection sites, and spin-lock connectors. All products must be DEHP-free and Latex-free, adhering strictly to RP001 palletization and Medical Marking Standard No. 1. The contract specifies the delivery of IV sets in cases of 50 under NSN 6515017110944, with the place of performance located at Fort Bragg. Operating under NAICS code 339112, the solicitation was posted on October 15, 2026, with a response deadline of October 21, 2026.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

Manufacturing of Dental Chisels (Dr. Black No. 84)This subcontract involves the manufacture and supply of over 100 Dr. Black No. 84 dental chisels for prime contractors supporting DLA Troop Support Medical Supply Chain projects. The instruments must be precision machined from medical-grade stainless steel within an FDA-compliant facility, adhering strictly to NSN 6520005364025 and DLA Master List RA001 standards. The contractor is required to maintain compliance with Medical Marking Standard No. 1 and ASTM D3951 packaging requirements. Performance for this Department of Defense contract will take place in Patuxent River, with the solicitation posted on October 15, 2026, and a response deadline of October 22, 2026.

MEDICAL SUPPLY CHAIIN FSH

POSTED

DEADLINE

Blood Pressure Cuff Manufacturer (Zoll Compatible)This subcontract involves the manufacture and supply of 20,000 large adult blood pressure cuffs, specifically designed for compatibility with Zoll monitor-recorder defibrillator systems. The required cuffs must have a circumference of 38 to 50 and correspond to NSN 6515-01-526-0304. These items are intended for prime contractors working on Department of Defense projects under the DLA Troop Support Medical Supply Chain. The manufacturer must strictly adhere to FDA Class II device regulations and Good Manufacturing Practices, necessitating valid FDA Registration and 510(k) clearance. Additionally, the contract mandates full compliance with the Buy American Act and the Berry Amendment. Performance for this requirement is centered at Fort Stewart, with the project falling under NAICS code 339112.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

Supply of Male Patient Urinals (NSN 6530-01-461-7988)This subcontract involves the supply of finished male patient urinals, identified by NSN 6530-01-461-7988, for prime contractors working on Department of Defense DLA Troop Support Medical Supply Chain projects. The required products must be manufactured or sourced from polyethylene plastic and include a sturdy handle and a hinged cap designed for spillage and odor control. All units must strictly adhere to Medical Marking Standard No. 1A for labeling and comply with the Buy American Act and Berry Amendment requirements. The contract specifies that the urinals must be delivered to the USS MILIUS DDG 69, with packaging following RP001 and ASTM D3951 standards at four units per package. This procurement falls under NAICS code 339112 and is managed by the Medical Supply Chain FSH. The solicitation was posted on October 15, 2026, with a response deadline of October 22, 2026.

MEDICAL SUPPLY CHAIIN FSH

POSTED

DEADLINE

Supply of Automatic Donor Scales (NSN 6670-01-139-9535)This subcontract involves the supply of two FDA-regulated automatic donor scales, specifically NSN 6670-01-139-9535, for prime contractors working on DLA Weapons Support ASC projects. The hardware must meet Highland Labs P/N 4R4419 or Model 368-A1 specifications to ensure the proper clamping of donor tubing during blood collection. Performance will take place in Wichita, Kansas, under NAICS code 339112. The contractor must ensure strict adherence to several regulatory and technical standards, including FDA medical device compliance and the Buy American Act. Additionally, the equipment must implement Item Unique Identification in accordance with MIL-STD-130 and comply with DFARS 252.211-7003. Responses to this requirement are due by October 23, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

Supply of Light Lenses (NSN 5850015007284)This subcontract involves the manufacture or sourcing of 13 precision light lenses meeting NSN 5850015007284 specifications for critical applications. The project supports prime contractors delivering to the Department of Defense, specifically the DLA Weapons Support ASC Supplier Oper AE and AF Div, with performance taking place at Hill AFB. The contractor must utilize precision optical grinding or molding equipment and maintain strict quality assurance standards governed by MIL-STD-1916 or ASQ H1331 using a zero-based sampling plan. Additionally, the provider is required to be compliant with DFARS 252.204-7012 regulations. The response deadline for this opportunity is October 23, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Light Lens Supplier (NSN 6220014766204)This subcontract opportunity is for the manufacture or procurement of 19 precision light lenses, identified by NSN 6220014766204, to support prime contractors for the DLA Weapons Support ASC Commodities Division. The project requires strict adherence to the DLA Master List of Technical and Quality Requirements (RA001), with quality sampling and inspection conducted according to MIL-STD-1916 or ASQ H1331. Performance will take place at Tinker AFB. The contract is designated as a Total Small Business Set-Aside under NAICS code 339112. Eligible providers must maintain a CMMC Level 2 self-assessment and ensure full compliance with the Buy American Act and the Berry Amendment. Interested parties must respond by October 23, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Supplier of Waxed Nylon Dental FlossThis subcontract involves the supply of waxed nylon dental floss to prime contractors supporting the Department of Defense Medical Supply Chain FSH. The requirement specifies 200-yard rolls under NSN 6520-01-500-1520, with a total delivery of 18 packaged units to APO AE 09227-0000. Strict adherence to packaging and marking standards is required, specifically MIL-STD-2073-1E, MIL-STD-129, and Medical Marking Standard No. 1. Additionally, the supplier must ensure full compliance with the Buy American Act and the Berry Amendment. The solicitation was posted on October 15, 2026, with a response deadline of October 22, 2026.

MEDICAL SUPPLY CHAIIN FSH

POSTED

DEADLINE

ADMINISTRATION SET, INT

Solicitation # SPE2DS-27-T-0706

Solicitation SPE2DS-27-T-0706 is a total small business set-aside issued by the DLA Troop Support Medical Supply Chain for the procurement of 300 packages of sterile, disposable intravenous fluid administration sets, identified by NSN 6515-01-561-6204. Each package contains 50 units. The technical specifications require vented sets with a 10 drop/ml rate, needleless coiled tubing 96 inches in length, a roller clamp, a Luer-lock with a rotating collar, a pre-slit injection site 16 inches from the Luer, and a Clave type injection site 8 inches from the Luer. These sets are designed for use in transportation and confined patient spaces. The contract mandates a shelf life of 60 months, with no more than 9 months elapsed from the date of manufacture to the date of delivery. Delivery is set for 51 days after order, with FOB destination terms to locations in Tracy, California, and New Cumberland, Pennsylvania. Packaging and marking must comply with MIL-STD-2073-1E, MIL-STD-129, and Medical Marking Standard No. 1, including the lot number and manufacture date on all containers. Payment and invoicing must be processed through the Wide Area WorkFlow system. Compliance with the Buy American Act, Berry Amendment, and various DFARS cybersecurity and trafficking regulations is required.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

OXIMETER, PULSE

Solicitation # SPE2DS-27-T-0704

Solicitation SPE2DS-27-T-0704 is a fixed-price contract issued by the Defense Logistics Agency for the procurement of 15 Masimo MightySat Rx Pulse Oximeters, identified by NSN 6515-01-655-9412. These medical devices are specifically designed for patient movement environments to measure pulse rate, oxygen saturation, and perfusion index, featuring a battery life of approximately 1,800 spot checks and a compact design weighing 0.16 pounds. The delivery is required by June 16, 2026, with the place of performance and delivery located at the Naval Weapons Station in Yorktown, Virginia. The contract mandates strict adherence to medical packaging and marking standards, specifically requiring Medical Marking Standard No. 1, which supersedes MIL-STD-129. All units must be delivered in sealed commercial containers and comply with ASTM D3951 and DLA packaging requirements. Regulatory compliance is critical, as the devices require a 510(k) and must meet GMP and registration standards. Administrative requirements include electronic invoicing via the Wide Area WorkFlow system and compliance with various DFARS and FAR clauses regarding cybersecurity, domestic sourcing under the Buy American Act, and the prohibition of covered defense telecommunications equipment.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

BLOOD COOLER, FIELD TRA

Solicitation # SPE2DS-26-T-488C

Solicitation SPE2DS-26-T-488C, issued by the DLA Troop Support Medical Supply Chain, is a request for quotations for nine field transport blood coolers designed for combat medics in austere environments. These ultra-lite containers are engineered to transport one unit of whole blood while maintaining a cold chain of 4 degrees Celsius for at least 16 hours without external power. Each unit must include vacuum insulated panels protected by a thin hard shell, a thermal insulated capsule, a data logger with an integrated pocket for internal probe routing to prevent snag hazards, and a Coyote Multicam MOLLE carrier. The contract requires delivery FOB Destination to a US Army location in Poland within 20 days after order. All materials must be marked according to Medical Marking Standard No. 1, which supersedes MIL-STD-129, and must be packed in suitable commercial sealed containers. Bidders are required to specify the source and part number being supplied and submit quotes via the DIBBS portal. The procurement is subject to various federal regulations, including the Buy American Act, the Berry Amendment, and destination inspection requirements under FAR 52.246-2. Invoicing and payment must be processed electronically through the Wide Area WorkFlow system.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

More opportunities from Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF

Same awarding agency

NEEDLE, INTRAOSSEOUS

Solicitation # SPE2DS-27-Q-0015

POSTED

about 1 hour ago

DEADLINE

DELIVERY KIT, OBSTETRIC

Solicitation # SPE2DS-27-Q-0017

POSTED

about 1 hour ago

DEADLINE

LEAD SET, ELECTRODE, ELE

Solicitation # SPE2DS-27-Q-0016

POSTED

about 1 hour ago

DEADLINE

Berry Amendment Compliant Tactical Fabric SupplierThis subcontract through the Department of Defense Medical Supply Chain MD SURG FSF involves the procurement of raw materials for prime contractors supporting DLA medical supply contracts. The scope of work requires the manufacture and delivery of bulk heavy-duty tactical fabric in Olive Drab Green, specialized MOLLE-compatible webbing, and clear medical-grade tear-away pouch materials. A critical requirement for this contract is Berry Amendment certification, which mandates that all provided materials be produced and manufactured within the United States. The performance of this contract is designated for FPO 96643, with a response deadline set for October 21, 2026.

All Other Miscellaneous Textile Product Mills

POSTED

DEADLINE

Mini Medic Compact Trauma Aid Bag SupplierThis subcontract involves the supply of seven Mini Medic Compact Trauma Aid Bags (NSN 6545017226568) to prime contractors supporting Department of Defense medical supply contracts. The bags must be produced in Olive Drab Green and feature specific design elements, including external pouches, side and bottom MOLLE webbing, external expansion zippers, and back panel drop-down pouches. Internal specifications require clear tear-away and mesh pouches consistent with North American Rescue part 80-0955T. The procurement is managed by the Medical Supply Chain MD Surg FSF and requires strict adherence to the Berry Amendment and the Buy American Act. Performance for this contract is designated for FPO 96643, with the project falling under NAICS code 339113.

Surgical Appliance and Supplies Manufacturing

POSTED

DEADLINE

Medical Device Packaging and Distribution ServicesThis subcontract for Medical Device Packaging and Distribution Services supports prime contractors on DLA Troop Support Medical Supply Chain projects. The scope of work involves specialized medical-grade packaging, marking, and delivery, ensuring all products adhere to MIL-STD-2073-1E, MIL-STD-129, and Medical Marking Standard No. 1. The contractor must utilize MIL-SPEC materials and medical-grade labeling systems to provide compliant shipments delivered FOB Destination to facilities in Tracy, California, and New Cumberland, Pennsylvania. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 484220 for the Department of Defense. Interested parties should note the response deadline of October 21, 2026. Performance is centered in Tracy, California, focusing on the delivery of fully compliant and marked medical shipments to the agency.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

Sterile IV Administration Set Manufacturer (NSN 6515-01-561-6204)This subcontract opportunity is for the manufacture and supply of 300 packages of sterile, disposable intravenous fluid administration sets for prime contractors supporting Department of Defense DLA Troop Support Medical Supply Chain projects. The required sets must feature a 10 drop/ml rate, 96-inch needleless coiled tubing, roller clamps, Luer-locks, and slide clamps. Production must take place in cleanroom environments using appropriate sterilization equipment to ensure medical safety and quality. The contract is designated as a Total Small Business Set-Aside under NAICS code 339113, with performance located in Tracy, California. Awardees must strictly adhere to Medical Marking Standard No. 1, the Buy American Act, and the Berry Amendment. Interested parties must submit their responses by October 21, 2026.

Surgical Appliance and Supplies Manufacturing

POSTED

DEADLINE

Supply of Cardiac Science PowerHeart G5 Defibrillation PadsThis subcontract involves the supply of electrocardiograph electrodes, specifically NSN 6515-01-652-8523 pads designed for Cardiac Science PowerHeart G5 AEDs, to support prime contractors under DLA Troop Support Medical Supply Chain contracts. The agreement requires the delivery of three units FOB Destination to the USNS Impeccable. To ensure medical efficacy and regulatory compliance, the pads must maintain a 24-month shelf life and adhere to Medical Marking Standard No. 1 and ASTM D3951 packaging standards. Additionally, the provider must comply with the Buy American and Balance of Payments Program requirements.

Medical, Dental, and Hospital Equipment and Supplies Merchant Wholesalers

POSTED

DEADLINE

Application Bar SupplyThis subcontract involves the fabrication and delivery of application bars for prime contractors supporting DLA Troop Support Medical Supply Chain projects. The contractor is responsible for producing these components according to the specific dimensions and material requirements of NSN 6510-01-532-6656, utilizing approved medical-grade plastics or metals. A critical requirement of the agreement is strict adherence to Berry Amendment compliance. The project is managed under the Department of Defense for the Medical Supply Chain MD Surg FSF, with performance taking place at Joint Base Lewis McChord. Classified under NAICS code 339113, the contract requires the successful manufacture and delivery of the specified medical hardware to meet agency standards.

Surgical Appliance and Supplies Manufacturing

POSTED

DEADLINE

High-Absorbancy Pad and Elastic Dressing SupplyThis subcontract involves the supply of raw medical textile components for prime contractors supporting DLA Troop Support Medical Supply Chain projects. The scope of work focuses on the manufacture and bulk delivery of 12 by 12 inch white high-absorbancy pads and extra-wide secondary elastic dressings. These products must be fabricated using medical-grade non-woven fabrics, elastic polymers, and absorbent cotton or cellulose materials. Managed by the Department of Defense under the Medical Supply Chain MD Surg FSF, the contract requires strict adherence to Berry Amendment compliance to ensure all materials are domestically sourced. Performance for this contract is centered at Joint Base Lewis McChord. The opportunity was posted on October 15, 2026, with a response deadline of October 21, 2026, falling under NAICS code 339113.

Surgical Appliance and Supplies Manufacturing

POSTED

DEADLINE

Sterile Abdominal Wound Kit AssemblyThis subcontract involves the final assembly, sterile packaging, and quality certification of abdominal wound bandage kits for the Department of Defense Medical Supply Chain. The scope of work includes assembling individual components such as application bars and absorbency pads within a sterile clean-room environment. All kits must be sterilized to medical standards and packaged in sealed unit containers in strict accordance with MIL-STD-2073-1E and Medical Marking Standard No. 1. The project is managed under NAICS code 339113 and will be performed at Joint Base Lewis McChord. The contractor is responsible for the delivery of completed, sterile, and properly marked bandage kits to prime contractors supporting DLA Troop Support. The response deadline for this opportunity is October 21, 2026.

Surgical Appliance and Supplies Manufacturing

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS