This Solicitation opportunity from California was posted on June 2, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

IFB Large Equipment Preventative Maintenance and Repair Services ¿ DR260090

Closed

0000039444State & Local

Submission Closed06/16/2026, 10:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 811310

New

DIBBS

Shipboard Safety Control IntegrationThe Shipboard Safety Control Integration subcontract involves performing critical safety control modifications for prime contractors on DLA naval equipment contracts. The primary scope of work is the installation of manually operated, two-handed control systems on commercial laundry presses to ensure full compliance with NSTM 655 2.6.1G naval safety standards. The project requires the delivery of a safety-certified control interface that is electrically compatible with 440V/60Hz/3PH systems. Managed under the Department of Defense through Construction & Equipment Containers, this effort falls under NAICS code 811310. The place of performance is designated as FPO 96661. Interested parties must adhere to the timeline established by the posting date of October 14, 2026, with a response deadline set for October 26, 2026.

CONSTRUCTION & EQUIPMENT CONTAINERS

POSTED

DEADLINE

Furnish Labor, Materials and Equipment to Repair

Solicitation # 245

The Jefferson Parish Government is soliciting bids under Bid Event No. 245 for the provision of labor, materials, tooling, and equipment to repair and inspect various cranes at the Bonnabel, Suburban, Elmwood, and Duncan Eastbank pump stations. The scope of work includes specific repairs such as installing ground buss and strobes, replacing resistor banks, rewinding hoist motors, and replacing bridge limit switches across several Shawbox, P&H, and Kranco cranes. All work must be completed within 180 calendar days from the date of the purchase order issuance and performed during standard operating hours of 7:00 a.m. to 5:00 p.m., Monday through Friday. The contractor is required to provide detailed inspection reports for each crane and submit firm written quotes for any additional repairs discovered during the process. The contract will be awarded to the lowest responsive and responsible bidder. Compliance requirements are stringent, requiring bidders to provide a notarized bid affidavit covering criminal history and employee status verification, as well as a corporate resolution proving the signatory's authority. Bidders must meet specific insurance minimums, including 1,000,000 dollars for Commercial General Liability and Business Automobile Liability, and 500,000 dollars for Worker's Compensation. All technical work must adhere to OSHA, CMAA, ANSI, and NEC standards, with a requirement that all crane components originate from a single major recognized brand from an OEM source that is a CMAA/HMI member.

Jefferson Parish Government

POSTED

DEADLINE

Press Brake Installation and TestingThis subcontract for the Texas A&M University System Space Collaboration Facility involves the professional installation and testing of a hydraulic press brake. The scope of work requires the contractor to perform mechanical installation, precision leveling, electrical connections, and comprehensive calibration using specialized testing tools to ensure the equipment is fully operational. The project must be completed and delivered by November 19, 2026. Interested parties should note that the solicitation was posted on October 14, 2026, with a response deadline of October 29, 2026. The work falls under NAICS code 811310 and is managed through the Texas A&M University procurement system.

POSTED

DEADLINE

Overhead Hoist Maintenance and Emergency RepairThis small business set-aside subcontract, issued by the Department of Defense for the 316 Cons Pk, involves providing unscheduled routine and emergency repairs for electric and manual hoists at Andrews Air Force Base. The selected contractor will support prime contractors on Air Force facility projects by responding to service calls and utilizing OEM Operation and Maintenance manuals to ensure all hoist systems are fully repaired and operational. Qualified technicians must possess formal training in OSHA, ASME, ANSI, and DAFMAN 91-203 standards. This opportunity falls under NAICS code 811310, with a response deadline set for October 30, 2026.

POSTED

DEADLINE

Recycling Equipment Maintenance and RepairThis 8(a) set-aside subcontract involves providing technical maintenance and repair services for government-furnished recycling machinery supporting prime contractors at W6QM Micc-Ft Stewart. The scope of work focuses on ensuring the operational readiness of critical equipment, including balers, shredders, brass deformers, scales, and belt conveyors. The contractor is responsible for supplying all necessary authorized repair parts and tools, delivering fully operational machinery and comprehensive maintenance logs. The project falls under NAICS code 811310 and is managed by the Department of Defense. Performance will take place in the 31314 zip code area. Interested parties should note that the solicitation was posted on October 14, 2026, with a response deadline of November 16, 2026.

POSTED

DEADLINE

MTU Diesel Engine Field Overhaul and Technical SupportThe MTU Diesel Engine Field Overhaul and Technical Support subcontract involves providing specialized on-site technical support, diagnostics, and maintenance for MTU diesel engines supporting Naval Surface Warfare Center, Philadelphia Division projects. Key technical responsibilities include executing field diagnostics, vibration analysis, and borescope inspections utilizing heavy-lift rigging and MTU diagnostic software. The contractor is required to deliver comprehensive field service reports and documentation for all completed maintenance actions. Performance will take place in Philadelphia, Pennsylvania, and requires personnel to be MTU Certified Technicians. Due to the nature of the work on Navy piers, all staff must possess the necessary security clearances for site access. This opportunity is categorized under NAICS code 811310 and is managed under the Department of Defense.

Nswc Philadelphia Division

POSTED

DEADLINE

Call for Solutions - Bavaria Area Commercial Refrigeration Services

Solicitation # HQC0102704

The Defense Commissary Agency is seeking innovative commercial solutions for refrigeration maintenance services at commissaries located in the Bavaria area, specifically in Grafenwoehr and Vilseck. This requirement, issued under solicitation HQC0102704 as a Commercial Solutions Opening, encompasses comprehensive preventative, unscheduled, and 24/7/365 emergency maintenance for commercial product refrigeration systems to ensure continuous operations and prevent inventory loss. The government is looking for a provider with proven expertise in commercial grocery settings who can offer rapid on-site emergency response and transparent fixed-price quoting and reporting procedures. The anticipated period of performance is for up to five years, potentially structured as a base period with one or more option periods. Awardees must ensure full compliance with German and European Union statutory requirements, as well as Department of War statutory, safety, and warranty standards. Interested vendors were required to submit a Phase 1 Solution Brief by October 14, 2026. Evaluation focuses on technical capabilities, alignment of the service model with government value-driven goals, and adherence to local commercial standards for preventative maintenance.

Defense Commissary Agency- Eur Area

POSTED

DEADLINE

YUMA VMS MODERNIZATION

Solicitation # N3220527Q7017

Solicitation N3220527Q7017 is an Invitation for Bid issued by MSCHQ Norfolk for the YUMA EPF Video Management System (VMS) Upgrade. The project requires technical services to replace Video Management Servers VMS1 and VMS2 and upgrade the system to the Ocularis version currently installed on EPF-13 for the vessel EPF-8. Work will be performed at Lamberts Point in Norfolk, Virginia, with a performance period from November 16 to December 18, 2026. The scope includes utilizing Government Furnished Equipment for the upgrade, conducting comprehensive tests and inspections of the JSCE and JRSS systems to ensure hardware and software functionality, and providing on-site crew training on new operational procedures and view setups for JRSS/JSCE and JWICS systems. This acquisition is set aside for Women-Owned Small Businesses under NAICS code 811310. The contract is a Firm Fixed Price arrangement, and bidders must provide a detailed cost breakdown including labor hours, hourly rates, travel, and materials. Award is typically based on the lowest responsive and responsible bidder. Administrative requirements include electronic invoicing via the Wide Area WorkFlow system and compliance with various FAR and DFARS clauses, including Buy American and Service Contract Labor Standards. Responses are due by October 22, 2026.

POSTED

DEADLINE

Overhead Hoist Maintenance Joint Base Andrews

Solicitation # SSNFA2860

The Department of Defense, through the 316 Cons Pk office, is issuing a sources sought notice for a small business set-aside contract to provide comprehensive maintenance, testing, and certification for overhead hoists and associated equipment at Joint Base Andrews and Davidsonville, Maryland. The scope of work requires the contractor to furnish all labor, transportation, equipment, and supervision for annual certified inspections and both routine and emergency service call repairs. All work must be performed by qualified technicians with formal training and must adhere to OSHA, ASME, ANSI, and DAFMAN 91-203 standards, as well as original equipment manufacturer specifications. Key deliverables include the submission of a Quality Control Plan within 15 calendar days of award and the provision of certification inspection certificates to the Contracting Officer's Representative within five business days of completion. For payment, the contractor must provide service tickets annotated by the COR and follow specific reimbursement protocols for parts, requiring a single invoice for items under 3,000 dollars and three competitive quotes for items exceeding that amount. Access to Joint Base Andrews requires the submission of detailed personnel and vehicle information, and strict adherence to installation security policies regarding prohibited weapons and controlled substances is mandatory.

POSTED

DEADLINE

Motor Rotor Assembly Repair_Rev1

Solicitation # N3904026S3204

The Portsmouth Naval Shipyard is conducting market research via a sources sought notice to identify capable firms for a firm fixed price contract to inspect, report, repair, and test a Hansome Energy Systems A.C. motor rotor assembly. The primary technical requirement involves addressing damaged shaft impeller threads that exceed simple hand work repair. Work must be performed in accordance with Hansome Energy Systems drawing A-326-239 Rev C and Submarine Maintenance Standard 5320-081-045 Rev CHG-3. The contractor will be required to provide a condition trouble report, written test results, a work completion report, and a certificate of compliance. If repairs are not feasible, the contractor must provide a quote for a replacement motor shaft assembly. The project will be executed at the contractor's location, with the final delivery of materials to Kittery, Maine, by February 1, 2027, under FOB Destination terms. Access to OEM proprietary data and submarine maintenance standards is required. Interested organizations must provide their company details and a tailored capability statement to the primary point of contact, Alyssa Scarelli. This notice is for informational purposes only and does not constitute a solicitation or a commitment by the government to award a contract.

Portsmouth Naval Shipyard Gf

POSTED

DEADLINE

Workshop Machinery and Hydraulic Systems TechnicianThis subcontract opportunity is for a Workshop Machinery and Hydraulic Systems Technician to support prime contractors on Durham County Council fleet projects. The selected provider will be responsible for the repair and maintenance of general workshop machinery, specifically focusing on hydraulic pumps, valves, and industrial metal containers. Additionally, the contractor must perform preventative maintenance on powered equipment support tools in accordance with CPV 50500000 standards to ensure all systems remain fully operational. The contract was posted on October 13, 2026, with a response deadline of November 17, 2026. Operating under NAICS code 811310, the project is managed by the Durham County Council. Interested parties can find further details through the official tender notice provided by the agency.

Durham County Council

POSTED

DEADLINE

MOT and DVSA ATF Lane Equipment SpecialistThis subcontract for the Durham County Council involves providing specialized maintenance, calibration, and repair services for vehicle testing equipment. The scope of work focuses on the calibration of emissions equipment, headlight testers, and brake testers, with a specific requirement to maintain the DVSA ATF lane located at the Meadowfield Depot. All services must strictly adhere to DVSA standards for MOT equipment calibration and ATF lane operations to ensure the delivery of certified, operational testing facilities. The opportunity is categorized under NAICS code 811310 and was posted on October 13, 2026. Interested parties must submit their responses by the deadline of November 17, 2026, at 12:00 PM. The primary objective of the contract is to ensure that all vehicle testing equipment used for fleet projects remains compliant and fully functional according to regulatory requirements.

Durham County Council

POSTED

1 day ago

DEADLINE

in about 1 month

AI Contract Overview

The California Department of Education is seeking bids for preventative maintenance and repair services for large equipment at the California School for the Deaf in Riverside. The contract is expected to commence around September 23, 2026, though actual start depends on approval by the Department of General Services if required. This contract includes an initial period with two optional one-year renewals. Interested bidders must comply with the specifications outlined in the solicitation and submit their proposals by June 16, 2026. Services will be performed on-site at the school, located at 3044 Horace Street, Riverside, California. The solicitation is managed by the School for the Deaf-Riverside agency within the state education system. Questions and responses can be directed to the primary contact, McKinley Carlisle, via the provided email. The solicitation and related documents are available through the state procurement portal for review and submission.

General Info

California School for the Deaf seeks bids for equipment maintenance starting September 2026, renewals optional.

Agency

California → School for the Deaf-Riverside

NAICS

811310 - Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

Place of Performance

CA, USA

Set-Aside

NONE

Documents

DR260090_Lrg_Equipment_Prevent_Mainten_and_Repair_Srvs_IFB.pdf

AI Contract Breakdown

Uniform Contract Format

Timeline

PhaseClosed

PostedJun 2

Solicitation

Response DeadlineJun 16

Deadline has passed

Submission Closed

06/16/2026, 10:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyCalifornia → School for the Deaf-Riverside

Contacts1 person available

OfficeN/A

Organization / AgencyCalifornia → School for the Deaf-Riverside

Office AddressN/A

Contacts

McKinley Carlisle

contact@example.gov

Full Description

The California Department of Education (CDE) is soliciting bids to provide large equipment preventative maintenance and repair services for the California School for the Deaf, Riverside (CSDR), located at 3044 Horace Street, Riverside, CA 92506, in accordance with the specifications contained herein this Invitation for Bid (IFB). It is anticipated that the contract start date will begin approximately on September 23, 2026. The actual start date of the contract is contingent upon approval of the agreement by the Department of General Services (DGS), if required. Contract includes two oneyear options to renew.

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS