Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →
CLEATUS
Get CLEATUS

This Solicitation opportunity from Tennessee was posted on April 10, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Impact Wood

Closed
Z4259State & Local

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 423840
New
DIBBS
Supply of Spacer, Collector (NSN 5365008770039)This subcontract involves the sourcing or fabrication of Spacer, Collector aviation hardware to support prime contractors under DLA Weapons Support supply contracts. The required components must meet the specifications for NSN 5365008770039 and Part Number 6792323, referencing standards from General Motors Corp or Rolls-Royce Corporation. A critical requirement of the agreement is the provision of airworthiness documentation and Critical Application Item certification to ensure safety and compliance. Managed by the Department of Defense under the DLA Weapons Support Aviation Supply Chain ESOC Buys, the contract falls under NAICS code 423840. The physical components are to be delivered directly to Tainan Branch Warehouse No. 859-1 located in Tainan City, Taiwan. The solicitation was posted on October 27, 2026, with a response deadline of November 4, 2026.
DLA WEAPONS SUPPORT AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

about 19 hours ago

DEADLINE

in 7 days
NAICS: 423840
New
DIBBS
Hull Drain Poppet Valve Assembly SupplierThis subcontract involves the procurement or manufacture of one Hull Drain Poppet Valve Assembly to support DLA Weapons Support Land Supply Chain contracts. The required parts must match NSN 2590-01-599-4474, specifically referencing part numbers 34580JB from Stanadyne Corporation or 32/926087 from J.C. Bamford Excavators Limited. All deliverables must comply with the DLA Master List of Technical and Quality Requirements and follow MIL-STD-129 packaging standards, with delivery terms set as FOB Destination. The opportunity is managed under NAICS code 423840 for the Department of Defense. Interested parties must submit their responses by November 9, 2026, for performance located at Fort Bragg, ZIP code 28310.
DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 19 hours ago

DEADLINE

in 12 days
NAICS: 423840
New
DIBBS
Supply of Turnlock Fasteners (P/N 26S13-A-22)This subcontract, issued by the Department of Defense under the DLA Weapons Support ASC Commodities Division, requires the supply of 69 certified turnlock fastener studs, part number 26S13-A-22. These components are designated as Critical Application Items and are intended for prime contractors fulfilling DLA supply contracts. The agreement is a total small business set-aside under NAICS code 423840, with delivery terms established as FOB Origin. Strict adherence to military standards is required for the execution of this contract, including packaging per MIL-STD-2073-1E and RP001, marking per MIL-STD-129, and sampling per MIL-STD-1916 or ASQ H1331. Additionally, the contract explicitly prohibits the use of additive manufacturing in the production of these fasteners.
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 19 hours ago

DEADLINE

in 15 days
NAICS: 423840
New
DIBBS
Supply of Hamilton Sundstrand Weights (NSN 6115-01-503-8401)This subcontract involves the supply of 77 Hamilton Sundstrand aerospace weights, part number 968C593-4 and NSN 6115-01-503-8401, to support DLA Weapons Support ASC contracts. The components must adhere to strict quality standards, specifically MIL-STD-1916 or MIL-STD-105/ASQ Z1.4, and must be delivered as warranted aerospace components. The contractor is responsible for packaging and marking the shipment in accordance with MIL-STD-129, MIL-STD-2073-1E, and RP001. All units must be delivered via traceable means to Kadena Air Base in Japan. The procurement falls under NAICS code 423840 and is managed by the Department of Defense.
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 19 hours ago

DEADLINE

in 7 days
NAICS: 423840
New
DIBBS
Supplier of MLG Strut Seal Replacement KitsThis subcontract, issued by the Department of Defense through the DLA Weapons Support Land Supplier Opns Vehicle Spt, requires the supply of 17 MLG Strut seal replacement kits under NSN 5330-00-492-6735. The contractor is responsible for assembling the components into kits, providing protective cushioning, and including detailed contents lists. Due to the nature of the parts, the contractor must manage items designated as Critical Application and ensure full compliance with 29 CFR 1910.1200 regarding hazardous materials. The opportunity is a Total Small Business Set-Aside under NAICS code 423840, with performance taking place in Tracy, California. Interested parties must respond by November 9, 2026. The final deliverable consists of 17 boxed and cushioned seal replacement kits intended for prime contractors working on aircraft maintenance projects.
DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 19 hours ago

DEADLINE

in 12 days
NAICS: 423840
New
DIBBS
Lock Adhesive Chemical Sealer SupplierThis subcontract involves the procurement and delivery of 20 bottles of Henkel Loctite 243 lock adhesive chemical sealer, or an approved equivalent under NSN 6850-01-132-9624, to support DLA Weapons Support contracts. The supplier must ensure all products are provided in original manufacturer packaging with a minimum shelf life of 18 months. The selected provider is responsible for strict adherence to hazardous materials shipping regulations per IP025 and must follow marking standards MIL-STD-2073-1E and MIL-STD-129. Additionally, the supplier must provide all necessary Safety Data Sheets and OSHA labels. Performance will take place at FPO 96675-9600 for the Department of Defense.
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 19 hours ago

DEADLINE

in 7 days
NAICS: 423840
New
DIBBS
Supply of Headlights (NSN 6220-01-735-8575)This subcontract involves the supply of 20 headlight units, identified by NSN 6220-01-735-8575, to prime contractors supporting DLA Troop Support supply contracts. The work is managed under the Department of Defense through the DDSP New Cumberland Facility, with performance taking place in New Cumberland, Pennsylvania. The contractor is responsible for ensuring all units meet strict military and commercial standards, including commercial packaging per ASTM D3951, marking and labeling per MIL-STD-129, and palletization according to RP001 DLA Packaging Requirements. The final deliverable consists of 20 commercially packaged and marked headlights.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 19 hours ago

DEADLINE

in 12 days
NAICS: 423840
New
DIBBS
Supply of Nonmetallic Hose (NSN 4720-01-666-5283)This subcontract involves the supply of 10 units of nonmetallic hoses, specifically NSN 4720-01-666-5283, for the DLA Weapons Support Fluid Handling Division. The required hardware must be Parker-Hannifin part EW356NX8000KEA-72 and must be free of Class I ozone-depleting chemicals. All items are to be delivered to Virginia Beach, Virginia, in strict accordance with MIL-STD-2073-1E packaging and MIL-STD-129 marking standards. The contractor is required to maintain compliance with the Buy American Act and all applicable DFARS cybersecurity regulations. This procurement falls under NAICS code 423840 and is managed by the Department of Defense. Interested parties must adhere to the established response deadline of November 9, 2026.
DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 19 hours ago

DEADLINE

in 12 days
NAICS: 423840
New
DIBBS
Rigid Shaft Coupling Supplier (Rolls-Royce PN 23092791)This subcontract involves the supply of 13 units of Rigid Shaft Couplings for prime contractors supporting DLA Weapons Support ASC projects. The required components must be authentic OEM Rolls-Royce Corporation part number 23092791, identified by NSN 3010-01-737-7921, and must strictly adhere to the DLA Master List of Technical and Quality Requirements. The supplier is required to maintain a manufacturer inspection system compliant with SAE AS9003 or ISO 9001, with sampling conducted according to MIL-STD-1916 or ASQ H1331. This Department of Defense procurement is managed by the DLA Weapons Support ASC Supplier Oper OEM Division, with the place of performance located in Virginia Beach.
DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 19 hours ago

DEADLINE

in 7 days
NAICS: 423840
New
DIBBS
Supply of Coupling Retainers (NSN 4730009090001)
DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 19 hours ago

DEADLINE

in 12 days
NAICS: 423840
New
DIBBS
Supply of Hose Assembly, Diffu (NSN 4720001044637)This subcontract involves the procurement of 20 units of Hose Assembly, Diffu, identified by NSN 4720001044637, for the Department of Defense under the DLA Weapons Support Maritime Supply Chain. The items must be sourced from approved manufacturers, specifically Honeywell Aerospace, Smiths Tubular Systems, or Eaton Aeroquip. The contractor is responsible for ensuring authenticity verification and adhering to MIL-STD-129 and ASTM D3951 packaging standards. The contract requires strict compliance with the Buy American Act, the Berry Amendment, and DFARS 252.204-7012. Delivery is specified as FOB Destination to Naval Base Rota, Spain. The solicitation was posted on October 27, 2026, with a response deadline of November 9, 2026, falling under NAICS code 423840.
DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 19 hours ago

DEADLINE

in 12 days
NAICS: 423840
New
DIBBS
OEM V-Belt Supplier (Deutz Corporation)This subcontract involves the supply of V-belting for prime contractors supporting DLA Weapons Support Land Supply Chain projects. The scope specifically covers NSN 3030-01-453-7098 and Deutz Corporation part numbers 117-5928 and 1180195. All provided components must be genuine OEM parts or approved equivalents that strictly adhere to the technical requirements of the NSN. The agreement requires full compliance with the Buy American and Balance of Payments Program under DFARS 252.225-7001. The contract is for the delivery of one unit of V-belting on a FOB Origin basis, with performance located in Jacksonville. Interested parties must respond by November 9, 2026.
DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 19 hours ago

DEADLINE

in 12 days

AI Contract Overview

Show more

This contract solicitation from Nashville Electric Service in Tennessee seeks bids for a specific impact wood bit with detailed specifications including a 9/16 inch size, self-feeding screw point, an 18-inch overall length, and a 7/16 inch hex shank. Approved manufacturers for this item include Milwaukee (part number 48-13-6703) and Greenlee (part number 37868). The contract falls under the category "Impact Wood" and is intended for use within the State and Local Electric Delivery (SLED) organization. The solicitation was posted on April 10, 2026, with responses due by April 16, 2026. Interested vendors can submit their bids through the Nashville Electric Service's vendor portal. The primary point of contact for procurement is Alan Martinez, who can be reached via email or phone. The place of performance and delivery is Nashville, Tennessee. This solicitation does not specify any set-aside type or NAICS code, emphasizing a straightforward procurement for the specified impact wood bits.

General Info

Nashville Electric Service seeks bids for specified 9/16" impact wood bits, deadline April 16, 2026.

Agency

Tennessee → Nashville Electric Service

NAICS

423840 - Industrial Supplies Merchant Wholesalers

Place of Performance

Nashville, TN, USA

Set-Aside

NONE

Documents

1

RFB Z4259 Electric Power Board NES Impact Wood Bit

PDF, High priority: read this firstrfb
High

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseClosed
Posted

Solicitation

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyTennessee → Nashville Electric Service
Contacts1 person available
OfficeNashville, TN, USA
Organization / AgencyTennessee → Nashville Electric Service
Office AddressNashville, TN, USA
Contacts
Alan MartinezProcurement Contact
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
BIT WOOD IMPACT 9/16 X 18 IMPACT WOOD BIT, 9/16", SELF FEEDING SCREW POINT, 18" OVERALL LENGTH, 7/16" HEX SHANK. Approved Manufacturers and/or Part Numbers: MLWAUKEE48-13-6703 GREENLEE37868

More opportunities from Tennessee → Nashville Electric Service

Same awarding agency

NAICS: 484220
New
SLED
Specialized Flatbed/Open-Top Transport for Steel PolesThis subcontract involves the specialized transport of five 30-foot steel poles for prime contractors working on Nashville Electric Service projects in Nashville. The selected provider must utilize an open-top vehicle to facilitate efficient unloading and is strictly required to keep the poles wrapped throughout transit to protect the factory-applied dark bronze finish. The primary objective is the delivery of the shafts to the designated site in a condition that preserves the integrity of the factory finish. This opportunity falls under NAICS code 484220, with a response deadline set for November 3, 2026.
Specialized Freight (except Used Goods) Trucking, Local

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 332323
New
SLED
Supply of Standard Steel Square Straight Shafts (30')This subcontract involves the manufacture and delivery of five 30-foot standard steel square straight shafts for prime contractors working on Nashville Electric Service projects in Nashville. Each shaft must be constructed with four-hole anchor bases, two detachable 2 inch IPS horizontal tenons, and a factory-applied dark bronze finish. To ensure structural integrity, all poles are required to comply with NESC 90 MPH wind load requirements. The completed shafts must be delivered wrapped to protect the finish. This procurement opportunity is categorized under NAICS code 332323, with a response deadline set for November 3, 2026.
Ornamental and Architectural Metal Work Manufacturing

POSTED

1 day ago

DEADLINE

in 6 days
View Details
New
SLED
Steel Pole
Solicitation # Z5432
Nashville Electric Service has issued Request For Bid Z5432 for the procurement of five 30-foot standard steel square straight shafts. The poles must feature a four-hole anchor base with a bolt circle between 10.5 and 11.5 inches, base nut covers, and a hand hole access of at least 3.5 by 5 inches with a cover. Each shaft must be factory-applied in dark bronze and equipped with two detachable 2-inch IPS horizontal tenons for luminaire mounting. Technical requirements specify that the poles must comply with the NESC 90 MPH wind load requirement and possess the strength to support two 50lb fixtures at 180 degrees with an EPA of 2.5 square feet each on a 10-inch arm. Bids must be submitted via the Bid Center by 2:00 pm local time on November 3, 2026. Only approved brands, specifically Hapco and Lytepole, are acceptable, and alternate brands will not be considered. To ensure quality and ease of unloading, poles must be wrapped to protect the finish during shipment and delivered using an open-top vehicle. Vendors are required to state their earliest delivery in calendar days, as delivery time may be a factor in the award decision. The primary procurement contact for this solicitation is Shanna Faulk.

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 332510
New
SLED
Supply of Figure 8 Swing Links (30K lbs)This subcontract agreement involves the supply of forged steel Figure 8 swing chain links for prime contractors working under Nashville Electric Service contracts. The required components must feature two 7/8 inch eyes, possess an ultimate strength of 30,000 pounds, and be galvanized in accordance with ASTM A123 standards. All deliverables must strictly adhere to specified brand and part number requirements for ItemId 182574500. The contract is managed by the Nashville Electric Service in Tennessee, with the place of performance located in Nashville. Interested parties must respond by October 29, 2026, regarding this procurement categorized under NAICS code 332510.
Hardware Manufacturing

POSTED

5 days ago

DEADLINE

in 1 day
View Details
NAICS: 423830
New
SLED
Supplier of 3M Safety Walk Anti-Slip RollsThis subcontract agreement involves the procurement and delivery of industrial anti-slip safety walking surfaces for prime contractors serving the Nashville Electric Service in Tennessee. The scope of work specifically requires the supply of 3M-AUTO 19282 Safety Walk Black Medium Grade rolls, or an approved equivalent, measuring 6 inches by 60 feet. The selected supplier is responsible for the physical delivery of the grip tape rolls to the designated facility in Nashville, ensuring strict adherence to established delivery timelines. This opportunity is categorized under NAICS code 423830 and is managed through the Nashville Electric Service vendor portal.
Industrial Machinery and Equipment Merchant Wholesalers

POSTED

5 days ago

DEADLINE

in 1 day
View Details
NAICS: 334418
New
SLED
Supply of 3P.S.T. Back Connected Knife SwitchesThis subcontract involves the supply and delivery of industrial electrical knife switches for prime contractors working on Nashville Electric Service projects in Nashville. The scope of work specifically requires the provision of AVO MULT MTS S-203-D-B units configured as 3P.S.T. back connected. These units must include BC barriers, ganged handles, dividers, and TBT-26 long studs, though mounting bars are excluded from the delivery requirements. The procurement is categorized under NAICS code 334418. Interested parties should note that the posting date is October 23, 2026, with a response deadline set for October 30, 2026. All physical 3P knife switch units must be delivered in accordance with the specified technical configurations to support the agency's infrastructure projects.
Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

5 days ago

DEADLINE

in 2 days
View Details
NAICS: 314121
New
SLED
Lineman's Rubber Glove ProtectorsThis subcontract involves the manufacture and supply of size 9 leather protector gloves for prime contractors working on Nashville Electric Service safety equipment projects. The gloves must be designed for use with 5,000 volt rubber gloves and strictly adhere to Federal Specification KK-L-170C and ASTM Specification F696-91. Each pair must be individually plastic-bagged and stamped on the cuff with the rubber glove hand size, the manufacturer name, and the NES designation. The scope of work requires the delivery of 24 pairs of these marked protector gloves to Nashville. This opportunity is categorized under NAICS code 314121 and is managed by the Nashville Electric Service in Tennessee. Interested parties should note the response deadline of October 30, 2026.
Curtain and Drapery Mills

POSTED

5 days ago

DEADLINE

in 2 days
View Details
NAICS: 484220
New
SLED
Flatbed Hauling and Unloading ServicesThis subcontract for Flatbed Hauling and Unloading Services involves the transportation and delivery of 400 utility poles to various yards in Nashville, Tennessee, in support of Nashville Electric Service utility projects. The selected provider will perform truck freight transportation using flatbeds, with operations scheduled between 6:30 AM and 2:30 PM CST. The scope of work requires the use of specialized equipment for on-site unloading, including crane trucks, knuckle booms, or heavy-duty forklifts. To qualify, personnel must possess a valid CDL and proper equipment operator certification. Interested parties must respond by November 5, 2026.
Specialized Freight (except Used Goods) Trucking, Local

POSTED

5 days ago

DEADLINE

in 8 days
View Details
NAICS: 321911
New
SLED
Treated Wooden Utility Pole SupplierThis subcontract agreement establishes the requirements for a supplier to provide treated wooden utility poles for prime contractors working on Nashville Electric Service projects in Nashville. The scope of work involves the manufacture and delivery of 400 40-foot Class 4 poles constructed from either Douglas Fir or Southern Pine. All materials must adhere strictly to NES Specifications 33-151R13 or 33-252R10. The supplier is responsible for the complete production process, including roofing and gaining according to NES Drawing 910 and the application of necessary chemical preservation treatments. The contract concludes upon the successful delivery of the 400 finished and processed poles. Interested parties must respond by November 5, 2026.
Wood Window and Door Manufacturing

POSTED

5 days ago

DEADLINE

in 8 days
View Details
NAICS: 332312
New
SLED
Steel Utility Pole Supplier (60ft Class H3)This subcontract agreement establishes the requirements for a supplier to provide hot-dipped galvanized steel poles for prime contractors working on Nashville Electric Service utility projects in Nashville. The supplier is responsible for manufacturing 60-foot poles that meet Class H3 equivalent standards, specifically maintaining a minimum capacity of 0243 ft-kips at ground level. The scope of work includes providing 1 inch jacking nuts and bolts for both the top and bottom halves of the poles, with a strict construction limit of no more than two sections. The selected supplier is responsible for the final delivery of the finished steel poles to Nashville Electric Service.
Fabricated Structural Metal Manufacturing

POSTED

5 days ago

DEADLINE

in 8 days
View Details
NAICS: 484220
New
SLED
Flatbed Delivery ServicesThis subcontract for Flatbed Delivery Services involves the transportation of 200 fiberglass crossarms for prime contractors working on Nashville Electric Service utility projects. The selected provider will be responsible for hauling these units from the manufacturer to designated delivery points in Nashville using an open flatbed truck or trailer as specified in the statement of work. To qualify for this engagement, the contractor must possess standard commercial trucking licenses and the required insurance coverage. The solicitation was posted on October 23, 2026, with a response deadline of November 3, 2026. This project falls under NAICS code 484220 for specialized freight trucking.
Specialized Freight (except Used Goods) Trucking, Local

POSTED

5 days ago

DEADLINE

in 6 days
View Details
NAICS: 326121
New
SLED
Tubular Fiberglass Crossarm SupplierThis subcontract agreement establishes the supply of 200 ten-foot tubular fiberglass crossarms for prime contractors working on Nashville Electric Service utility projects in Nashville. The supplier is responsible for manufacturing components that adhere to NES Specification ESI-4-E, with dimensions ranging from 3 1/2" x 4 1/2" to 5" x 7". The scope of work includes the provision of braceless mounting assemblies utilizing two 5/8" diameter bolts with vertical spacing of either 8" or 12". The contract is categorized under NAICS code 326121 and requires the delivery of the full quantity of crossarms and their corresponding mounting assemblies.
Unlaminated Plastics Profile Shape Manufacturing

POSTED

5 days ago

DEADLINE

in 6 days
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

NAICS: 423840
Closed
SLED
Misting Head Assemblies
Solicitation # RFQ 25-102Q
Oconee County

POSTED

7 months ago

CLOSED

6 months ago
View Details
NAICS: 423840
Closed
SLED
Tree Trimming Equipment and Supplies
Department of Health

POSTED

7 months ago

CLOSED

7 months ago
View Details
NAICS: 423840
Closed
SLED
144197 SUPPLIES, EMERGENCY, MISCELLANEOUS SURVIVAL SUPPLIES
Solicitation # 229137
Water & Power

POSTED

7 months ago

CLOSED

6 months ago
View Details
NAICS: 423840
Awarded
SLED
6732-FY25/26-FPERROTTA-WAREHOUSE-GRAINGER SUPPLY
Solicitation # C71296
Agency For Persons With Disabilities

POSTED

7 months ago

DEADLINE

N/A
View Details
NAICS: 423840
Awarded
SLED
7001-R1PHARM-01-350-H1 Uline
Solicitation # C71238
Department Of Corrections

POSTED

7 months ago

DEADLINE

N/A
View Details
NAICS: 423840
Awarded
SLED
7003-LOWCI-21-102-S1-Grainger-O/G Parts and Tools
Solicitation # C7123B
Department Of Corrections

POSTED

7 months ago

DEADLINE

N/A
View Details
NAICS: 423840
Awarded
SLED
64362958 PO Grainger (STD /WIC supplies)
Solicitation # C712D2
Department Of Health

POSTED

7 months ago

DEADLINE

N/A
View Details
NAICS: 423840
SLED
Smooth Bore Hose Kit Supplier
Finance & Administration

POSTED

7 months ago

DEADLINE

N/A
View Details
NAICS: 423840
Closed
SLED
145401R1 SWITCH, DISCONNECT
Solicitation # 229101
Water & Power

POSTED

7 months ago

CLOSED

7 months ago
View Details
NAICS: 423840
Awarded
SLED
7003-CFRC-34-102/601-S1-AA-PRIDE-JAN SUPPLIES-FY25-26 4TH QTR
Solicitation # C71036
Department Of Corrections

POSTED

7 months ago

DEADLINE

N/A
View Details
NAICS: 423840
Awarded
SLED
6732-FY25/26-FPERROTTA-WAREHOUSE-GRAINGER SUPPLY
Solicitation # C710A6
Agency For Persons With Disabilities

POSTED

7 months ago

DEADLINE

N/A
View Details
NAICS: 423840
Awarded
SLED
643955 (25-26) Grainger/EH 040626
Solicitation # C710CE
Department Of Health

POSTED

7 months ago

DEADLINE

N/A
View Details

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS