Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, December 9 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Independent Electrical Testing and Commissioning

Open

Federal

Response Deadline12/11/2026, 02:59:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract opportunity is for an independent, accredited organization to provide specialized electrical testing and commissioning services for USACE projects in Yokosuka, Japan. The scope of work involves performing low-voltage and medium-voltage cable insulation integrity tests, conducting apparatus inspections, and executing power system studies for prime contractors. The selected contractor is required to deliver certified electrical test reports and commissioning data in strict accordance with Spec Section 26 08 00. This requirement is issued under the Department of Defense via W2SN Endist Japan, with a response deadline set for December 11, 2026.

General Info

Agency

Department Of Defense → W2SN Endist Japan

NAICS

238210 - Electrical Contractors and Other Wiring Installation Contractors

Place of Performance

AP, JPN

Set-Aside

NONE

Documents

This scope was carved out of W912HV27Z0002.

The full solicitation package (2 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

DLA DWCF B1907 Backup Power Generator, Yokosuka, Japan

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedNov 12

subcontract

Response DeadlineDec 11

Submission deadline

Response Deadline

12/11/2026, 02:59:00 PM UTCin 28 days

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → W2SN Endist Japan

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → W2SN Endist Japan

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs independent electrical testing for prime contractors on USACE projects in Yokosuka, Japan. Conducts low-voltage and medium-voltage cable insulation integrity tests, apparatus inspection, and power system studies. Must be an independent, accredited organization. Delivers certified electrical test reports and commissioning data per Spec Section 26 08 00.

Similar Contracts

Same NAICS industry code

26-140 Installation of Emergency Shut Off Switches

Solicitation # 26-140

Solicitation 26-140 is a request for proposals for the installation of emergency shut-off switches on power tools at the Atterbury Job Corps Center in Edinburgh, Indiana. Operated by Adams and Associates for the U.S. Department of Labor, the project specifically targets the Facility Maintenance Shop to mitigate risks associated with dangerous rotating equipment. The scope of work requires the installation of two mushroom-head push-button emergency shut-off switches and a new 60A, 208/120V, 3-phase, 4-wire, 6-circuit branch circuit panel featuring a 60A shunt-trip main circuit breaker. All work must comply with OSHA, EPA, and national building codes, with Indiana state regulations taking precedence if they are more stringent. The contract is a small business set-aside and requires a single lump sum bid with a detailed cost breakdown, a timeline for substantial completion, and a minimum 90-day bid guarantee. Award will be based on best value, evaluated by price (60 points), quality (20 points), past performance (10 points), and schedule (10 points). Mandatory requirements for bidders include attendance at the site pre-bid conference on November 10, 2026, and a proposal submission deadline of November 20, 2026. Qualified contractors must provide a valid Indiana Contractor's License, proof of comprehensive insurance naming Adams and Associates and the Atterbury Job Corps Center as additional insureds, and certification of compliance with Davis Bacon Act wage rates. Upon award, the contractor must provide a sequenced construction schedule within 10 days of the Notice to Proceed. Final acceptance involves a two-stage process of substantial completion and final inspection, with a requirement to correct punch list items within 14 days. The contractor must provide all necessary training, operating manuals, and a one-year guarantee on workmanship. Payment is issued on Net 30 terms following the submission of subcontractor releases of claims and final inspections.

Atterbury Job Corps. – Adams & Associates

POSTED

about 4 hours ago

DEADLINE

Transformer Oil Testing Services

Solicitation # RFP-VC-26-010

The Inland Empire Utilities Agency is soliciting proposals under RFP-VC-26-010 for professional transformer oil testing services to enhance the reliability, safety, and maintainability of its transformers. The scope of work is divided into three primary areas: conducting visual and infrared thermographic inspections to identify thermal anomalies, installing standardized external oil sampling devices to improve safety during collection, and performing comprehensive oil testing and analysis. Additionally, the selected contractor will evaluate nitrogen blanket systems to ensure positive pressure is maintained, provide on-site training for agency staff on inspection methods, and develop standard operating procedures for oil maintenance and testing. All work must adhere to NETA MTS standards, IEEE guidelines, NFPA 70E safety protocols, and ASTM D923 and D924 specifications. This is a fixed-price contract with a not-to-exceed total value, intended as a single award to the most capable and cost-effective offeror, though the agency reserves the right to make multiple awards. Proposals are due by December 23, 2026, via PlanetBids and must include a detailed staffing plan, methodology, and evidence of similar project experience with utilities or industrial facilities. Evaluation criteria emphasize the contractor's ability to meet the project timeline, their technical approach to cybersecurity and safety, and their fee structure. Awardees must be registered public works contractors with the Department of Industrial Relations and provide comprehensive insurance certifications. Payment will be processed electronically via ACH within 30 days of invoice approval by the Project Manager.

Inland Empire Utilities Agency

POSTED

about 4 hours ago

DEADLINE

in about 1 month

Purified Water Replenishment San Jacinto Valley Advanced Water Purification Facility

Solicitation # purified-water-replenishment-san-jacinto-valley-advanced-water-purification-facility-2

Axia Electric LLC is soliciting bids from SBE/DBE certified firms for the Purified Water Replenishment San Jacinto Valley Advanced Water Purification Facility and Brine Ponds project in California. The requested scopes of work include low voltage systems, fiber optics, and the supply of electrical materials. Bids must be submitted by 2:00 PM on November 18, 2026, with a final deadline of November 19, 2026. Interested parties should contact Ryan Falk for quote submissions or Amy Roller for access to contract documents, plans, and specifications. Qualified bidders must be registered to perform public work pursuant to Labor Code Section 1725.5 and must adhere to the AGC Master Labor Agreements and the terms of the prime contract. Minimum insurance requirements include 1 million dollars for auto liability and workers compensation, 5 million dollars for excess liability, and general liability coverage of 1 million dollars per occurrence, 2 million dollars aggregate, and 2 million dollars for completed operations. Submission of a bid constitutes acceptance of Axia's Standard Long Form Subcontract or Purchase Order. Evaluation will consider SBE/DBE certification and any lower-tier participation provided within the quote.

POSTED

about 4 hours ago

DEADLINE

Centennial JCC Emergency Lighting Replacement, Upgrade, Testing & Maintenance Services

Solicitation # centennial-jcc-emergency-lighting-replacement-upgrade-testing-maintenance-services

Management and Training Corporation is soliciting bids for a fixed-price, single lump sum contract to provide emergency lighting replacement, upgrade, testing, and maintenance services at the Centennial Job Corps Center in Nampa, Idaho. The project involves engaging a qualified electrical contractor to inspect, repair, and certify emergency lighting systems to ensure 100% operational status. Key technical requirements include compliance with NFPA 101 (2024 Edition), NFPA 70 (National Electrical Code), and OSHA safety regulations. The contractor must apply durable, uniquely numbered labels to each fixture for future tracking and provide manufacturer and installer warranties upon completion. The estimated contract value ranges from $25,000 to $100,000. Bids are due by December 1, 2026, and must include a detailed cost breakout on company letterhead. A mandatory physical site visit is required prior to bid submission. For bids equal to or greater than $25,000, a bid bond of 20% of the base bid is required, and the awarded contractor must provide performance and payment bonds from a surety with at least an A- rating. Award decisions will be based on overall best value. This opportunity is set aside for small businesses, including VOSB, SDVOSB, WOSB, and HUBZone certified firms. The contract is subject to the Davis-Bacon Act, requiring the payment of prevailing wage rates for building construction in Canyon and Gem Counties, Idaho. Additionally, contractors must comply with FAR 52.222-4 regarding overtime compensation and EO 13706 regarding paid sick leave. First-tier subcontractors with awards exceeding $45,000 must provide debarment disclosure per FAR 52.209-6.

Management & Training Corporation/Centennial Job Corps Center

POSTED

about 4 hours ago

DEADLINE

ASO-1489-00 Installation of Distance Measuring Equipment (DME) on runway 15 at the Charleston International Airport in Charlston, SC

Solicitation # aso-1489-00-installation-distance-measuring-equipment-dme-runway-15-charleston-international-airport

This solicitation, identified as ASO-1489-00, involves the construction and installation of Distance Measuring Equipment (DME) collocated with the Runway 15 LOC at Charleston International Airport in South Carolina. Managed by Parsons, the project falls under NAICS code 238210 and is specifically designated as a set-aside for various small business types, including SBA certified Veteran Owned, Service-Disabled Veteran Owned, Women-Owned, and HUBZone small businesses. Interested parties must submit their responses by the deadline of November 27, 2026. The primary point of contact for this opportunity is Quentin Wack. This project represents a targeted effort to enhance aviation infrastructure at the Charleston facility through qualified small business participation.

POSTED

about 4 hours ago

DEADLINE

AMC-0235 TBD VOR Public Announcement

Solicitation # amc-0235-tbd-vor-public-announcement

This solicitation, issued by PTSI Managed Services Inc. (Parsons), involves a comprehensive construction project located in Louisiana. The scope of work encompasses a variety of facility improvements, including electrical work and grounding system repairs, roofing installation, plumbing replacements, grading, painting, and door repairs. The estimated magnitude of construction for these services is valued between 500,000 and 1,000,000 dollars. The opportunity is designated as an SBA set-aside, specifically open to Small Businesses, including Small Disadvantaged Businesses, Women-Owned Small Businesses, HUBZone Small Businesses, and Veteran-Owned Small Businesses. Interested parties must respond by November 16, 2026. The project falls under NAICS code 238210, and primary inquiries should be directed to Kurtis Kinard.

PTSI Managed Services Inc. (Parsons)

POSTED

about 4 hours ago

DEADLINE

ASO-0728-00 DME Shelter Installation in Shelby, NC

Solicitation # aso-0728-00-dme-shelter-installation-shelby-nc

Parsons Corporation is soliciting bids for the installation of a DME shelter in Shelby, North Carolina. The scope of work includes the installation of a shelter furnished by others, along with the DME antenna, associated foundations, junction box, meter rack, underground conduit, grounding, and conductors. This opportunity is open to various small business classifications, including SBA certified Veteran Owned, Service-Disabled Veteran Owned, Women-Owned, and HUBZone Small Businesses. Interested parties must submit their responses by December 30, 2026.

Parsons Corporation

POSTED

about 4 hours ago

DEADLINE

in about 2 months

FRSMP277009/JLM-Lighting Phase 2

Solicitation # WMATA-0000010972

The Washington Metropolitan Area Transit Authority is soliciting bids for contract FRSMP277009/JLM-Lighting Phase 2 under solicitation number WMATA-0000010972. This project falls under NAICS code 238210, which pertains to electrical contracting and related lighting services. The solicitation was posted on November 13, 2026, and requires all responses to be submitted by the deadline of December 2, 2026. Interested parties can access further details and manage their bids through the official WMATA supplier portal.

Washington Metropolitan Area Transit Authority

POSTED

about 4 hours ago

DEADLINE

Fire Alarm and Suppression SystemsThis subcontract, issued by Bristol Alliance of Companies, involves the installation of automatic fire sprinkler systems, smoke and heat detection, and fire alarm and mass notification systems for NAVFAC and US Navy projects at NBK Bangor. The scope of work specifically includes the installation of Silent Knight IFP-2000 FACPs, voice evacuation panels, addressable pull stations, and smoke detectors to deliver a fully certified fire alarm and sprinkler system. Qualified bidders must be licensed fire protection contractors and are required to coordinate closely with the Government Fire Protection Engineer. The project falls under NAICS code 238210, with a response deadline set for December 5, 2026.

Bristol Alliance of Companies

POSTED

about 12 hours ago

DEADLINE

Electrical Distribution and LightingThis subcontract for Electrical Distribution and Lighting involves the installation of interior electrical wiring, fixtures, switches, and outlets for prime contractors on NAVFAC and US Navy projects located at NBK Bangor. The scope of work includes the installation of concealed electrical metal conduits, Schedule 40 PVC for underground wiring, and bolt-on circuit breakers. A specific requirement is the provision of LED illumination maintaining 30-50 foot-candles for Access Control Rooms, with all installations requiring separate power and lighting circuits. All work must strictly conform to NFPA 70 National Electrical Code standards to deliver a fully operational electrical and lighting system. The project is managed by the Bristol Alliance of Companies under NAICS code 238210. Interested parties must note the response deadline of December 5, 2026.

Bristol Alliance of Companies

POSTED

about 12 hours ago

DEADLINE

Building G Generator Replacement - HQ

Solicitation # 405-27R0002844

The Texas Department of Public Safety (DPS) is soliciting proposals for the replacement of the existing generator at the DPS Headquarters Campus in Building G, located in Austin, Texas. The project scope involves the demolition and removal of the old equipment and the installation, configuration, and testing of a new, fully operational generator system. All work must adhere to approved construction documents and technical standards, including ANSI/NFPA 70, NEMA 250, NEMA MG1, and MIL E-4970A. A key performance requirement is the certification that a service mechanic will be on site within four hours if the generator fails to start. Proposals are due by 5:00 P.M. Central Time on November 19, 2026, via the DPS Online Bid Room or email. Award decisions will be based on a best value standard, evaluating indicators of probable vendor performance (40 points), technical requirements (30 points), and cost (30 points). Mandatory requirements include the submission of a project plan and schedule within ten business days of a kickoff meeting, and the provision of performance and payment bonds for contracts exceeding specific thresholds. Vendors must also comply with Texas state laws regarding HUB certification, cybersecurity training, and specific wage and sick leave requirements.

Department of Public Safety

POSTED

about 12 hours ago

DEADLINE

Low Voltage Cabling & Fiber Optic InfrastructureThis subcontract for Low Voltage Cabling and Fiber Optic Infrastructure involves the supply and installation of a communication backbone for a fire alarm replacement project at the California State Prison, Solano. Working under prime contractors for the California Department of Corrections and Rehabilitation, the selected provider will install new fiber pathways, secure conduits, and cabling to ensure reliable signal monitoring between various buildings, the onsite fire house, and central control. The scope of work focuses on the delivery of completed fiber and cable pathways with verified network connectivity using fiber optic cabling. This project falls under NAICS code 238210, with a response deadline set for February 1, 2027.

California Department of Corrections & Rehabilitation

POSTED

about 12 hours ago

DEADLINE

More opportunities from Department Of Defense → W2SN Endist Japan

Same awarding agency

Specialized Metal Products SupplyThis subcontract opportunity, managed by W2SN Endist Japan under the Department of Defense, involves the manufacture and delivery of specialized metal components for USACE projects located in Yokosuka, Japan. The scope of work requires the production of cast iron wheel guards, diamond-mesh window and door guards, and aluminum expansion joint covers. All deliverables must adhere to JIS G standards and Spec Section 10 26 00, with the contractor responsible for delivering the finished products directly to the project site. The solicitation was posted on November 12, 2026, with a response deadline of December 11, 2026. Classified under NAICS code 332322, this contract is specifically designed for suppliers capable of meeting rigorous technical specifications for metal products within the Japanese theater of operations.

Sheet Metal Work Manufacturing

POSTED

about 23 hours ago

DEADLINE

Site Demolition and EarthworkThis subcontract for Site Demolition and Earthwork involves performing site preparation for prime contractors on USACE projects located in Yokosuka, Japan. The scope of work includes the saw-cutting and removal of asphalt and concrete, as well as comprehensive excavation and backfilling services to deliver a cleared and graded site. To ensure safety and accuracy during utility location, the contractor is required to utilize X-ray or Ground Penetrating Radar and must strictly adhere to EM 385-1-1 Section 17 standards. Managed under the Department of Defense through W2SN Endist Japan, the project falls under NAICS code 238910. Interested parties must submit their responses by the deadline of December 11, 2026.

Site Preparation Contractors

POSTED

about 23 hours ago

DEADLINE

Structural Steel Fabrication and InstallationThis subcontract involves the fabrication and installation of structural steel for prime contractors supporting USACE projects in Yokosuka, Japan. The scope of work includes the construction of platforms, stairs, and protective railings in accordance with Spec Section 05 51 00. All work must utilize JIS G 3101 steel and adhere to strict welding and galvanizing standards, specifically JIS Z 3420 and AWS D1.1. Managed under the Department of Defense and W2SN Endist Japan, the project falls under NAICS code 332312. The solicitation was posted on November 12, 2026, with a response deadline set for December 11, 2026. All performance of the contract will take place within Japan.

Fabricated Structural Metal Manufacturing

POSTED

about 23 hours ago

DEADLINE

Concrete Foundations and PadsThis subcontract for Concrete Foundations and Pads involves performing cast-in-place concrete work for prime contractors on USACE projects located in Yokosuka, Japan. The scope of work includes the preparation of 150mm compacted gravel bases and the pouring of concrete slabs with a minimum thickness of 200mm, incorporating 152mm by 152mm mesh reinforcement and 15mm chamfered edges. All work must strictly adhere to Spec Section 03 30 00 to deliver finished concrete pads specifically for generators, transformers, and switchgear. Managed under the Department of Defense through W2SN Endist Japan, the project falls under NAICS code 238110. The solicitation was posted on November 12, 2026, with a response deadline set for December 11, 2026.

Poured Concrete Foundation and Structure Contractors

POSTED

about 23 hours ago

DEADLINE

Medium Voltage Electrical InfrastructureThis subcontract for Medium Voltage Electrical Infrastructure involves the installation of medium voltage electrical distribution for prime contractors on USACE projects located in Yokosuka, Japan. The scope of work includes the installation of metal-clad switchgear, pad-mounted liquid-filled medium-voltage transformers, and medium-voltage cabling to deliver a fully energized distribution system. To ensure system reliability and safety, the contractor is required to perform high-potential insulation integrity tests in accordance with IEEE 14.1-1996 and JIS C standards. This project is managed under the Department of Defense through W2SN Endist Japan and falls under NAICS code 238210.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

about 23 hours ago

DEADLINE

Backup Power Generator & Fuel System InstallationThis subcontract involves the installation of backup power generation systems for prime contractors on USACE projects located in Yokosuka, Japan. The scope of work requires the supply and installation of an 880-kW generator and a 5,000-gallon fuel tank, including all necessary fuel piping. To ensure system integrity, external fuel piping must undergo pressure tests at 150 percent of the maximum working pressure in accordance with NFPA 30 standards. The project is managed under the Department of Defense through W2SN Endist Japan and mandates strict adherence to EM 385-1-1 safety standards. The ultimate objective is the delivery of a fully operational backup power and fuel storage system. Interested parties should note the response deadline of December 11, 2026.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

about 23 hours ago

DEADLINE

DLA DWCF B1907 Backup Power Generator, Yokosuka, Japan

Solicitation # W912HV27Z0002

The U.S. Army Corps of Engineers, Japan District, is conducting market research for a Design-Bid-Build project to install a backup power generator at Building 1907 in Yokosuka, Japan. The project aims to provide reliable backup power for at least ten years, supporting future loads including five new VLMs, four conveyor elevators, and increased server room capacity. The estimated project magnitude is between 500 million and 2 billion Japanese Yen, with an anticipated period of performance of 518 calendar days. The government intends to issue an Invitation for Bid solicitation approximately in May 2027. This opportunity is strictly limited to local sources physically located and licensed to conduct business in Japan. Prospective offerors must possess a Japanese civil construction (doboku isshiki koji) or architectural construction (kenchiku isshiki koji) license, verifiable via the Ministry of Land, Infrastructure, Transport and Tourism website. Key requirements include compliance with EM 385-1-1 safety standards, the use of U.S.-flag vessels for sea transport, and adherence to strict hazardous material packaging and labeling regulations. The contractor must provide a dedicated QC Manager and a Site Safety Health Officer, and all electrical testing must be performed by an independent, accredited organization.

Power and Communication Line and Related Structures Construction

POSTED

about 23 hours ago

DEADLINE

RENOVATE MILITARY FAMILY HOUSING TOWER 4511, CAMP COURTNEY

Solicitation # W912HV26BA009

Solicitation W912HV26BA009 is an invitation for bid issued by the Department of Defense, specifically the W2SN Endist Japan office, for the renovation of Military Family Housing Tower 4511 located at Camp Courtney in Okinawa, Japan. The project falls under NAICS code 236118. A site visit was conducted on June 11, 2026, with various construction firms in attendance to review the project requirements. The procurement process has undergone several modifications via six amendments. These updates include multiple extensions of the bid submission deadline, with the final due date established as December 10, 2026, at 1:45 PM Japan Standard Time, followed by a bid opening at 2:00 PM JST. Additional changes included the release of Request for Information responses, updated specifications and drawings, and the provision of as-built drawings and site visit photos for informational purposes. Notably, Amendment 0005 revised the bid coversheet for CLIN 0005, updating the quantity to 2,000 square meters and changing the unit of measure from Job to Square Meter, while also adding variation in estimated quantity language to Section 00 73 00.

Residential Remodelers

POSTED

DEADLINE

AFHC Repair Quarters 82 and 86, Camp Zama, Japan

Solicitation # W912HV26BA019

Solicitation W912HV26BA019, issued by the Department of Defense W2SN Endist Japan, is for the FY27 AFHC Repair of Quarters 82 and 86 at Camp Zama, Japan. The project scope involves the repair of nine 3-bedroom or 4-bedroom units designated for junior noncommissioned officers and enlisted grades E1 through E6. Key technical requirements include structural and architectural repairs, specifically the construction of fire riser rooms with concrete wall footings, interior distribution system electrical installations, and exterior repainting limited to areas affected by demolition and repair. The project is classified as a DO-rated order under the Defense Priorities and Allocations System. The procurement process has been managed through the PIEE Solicitation Module, with multiple amendments issued to adjust the timeline. The final bid response deadline was extended to December 11, 2026. Technical compliance requires adherence to specific standards, including JIS C 8340 or JIS C 8435 for electrical outlet boxes and the acceptance of JCI Authorized Concrete Engineer certification as an equivalent to ACI Grade I. Contractors must comply with strict site access, security, and noise restrictions detailed in the specifications, and any alternative Japanese standard products must receive written approval from the Contracting Officer, Ruben Romero.

Residential Remodelers

POSTED

DEADLINE

Vehicle Recompete: OKINAWA CONSTRUCTION MATOC PROGRAM — INDEFINITE DELIVERY / INDEFINITE QUANTITY W912HV20R0002The Okinawa Construction MATOC Program is an indefinite delivery, indefinite quantity vehicle managed by the Department of the Army. The current ordering period for vehicle W912HV20R0002 is set to end on April 21, 2028. This program is classified as a full recompete and currently supports 33 active task orders with a total combined value of over 75 million dollars. Ten different companies hold awards under this solicitation, with American Engineering Corporation leading as the primary incumbent with over 35 million dollars across 12 orders. Other significant contributors include Seikitokyu Kogyo-Yabu Doken JV and Witco Industries Ltd. Major projects under this vehicle include the repair of munitions support buildings, waterfront repairs at White Beach Fuel Pier, and various HVAC and transformer replacements across multiple camps in Okinawa.

Commercial and Institutional Building Construction

POSTED

DEADLINE

Fuel Pad and Containment ConstructionThis subcontract for Fuel Pad and Containment Construction involves the development of reinforced concrete pads and secondary containment berms for fuel tanks on USACE Japan District fuel site projects. Working under prime contractors for the Department of Defense via W2SN Endist Japan, the selected provider will be responsible for formwork, rebar installation, and the pouring of fuel-resistant concrete utilizing specific additives and USACE specifications. Additionally, the scope of work includes asphalt paving for access roads to ensure full site functionality. The project falls under NAICS code 238110 and requires the delivery of completed concrete pads and containment structures. The solicitation was posted on October 19, 2026, with a response deadline set for September 30, 2027.

Poured Concrete Foundation and Structure Contractors

POSTED

DEADLINE

Fuel System Electrical and InstrumentationThis subcontract for Fuel System Electrical and Instrumentation involves the installation of electrical power and control systems for fuel pumps and monitoring sensors on USACE Japan District fuel site projects. The scope of work includes wiring dispensing units, installing leak detection alarms, and integrating fuel management hardware. All work must be performed by licensed electricians using explosion-proof electrical fittings and adhering to Class I, Div 1 wiring standards per NFPA 70 to deliver a fully operational system. Managed by W2SN Endist Japan under the Department of Defense, the project falls under NAICS code 238210. The solicitation was posted on October 19, 2026, with a response deadline set for September 30, 2027.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Get full access

Join 750+ contractors already using CLEATUS