Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, December 9 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Structural Steel Fabrication and Installation

Open

Federal

Response Deadline12/11/2026, 02:59:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves the fabrication and installation of structural steel for prime contractors supporting USACE projects in Yokosuka, Japan. The scope of work includes the construction of platforms, stairs, and protective railings in accordance with Spec Section 05 51 00. All work must utilize JIS G 3101 steel and adhere to strict welding and galvanizing standards, specifically JIS Z 3420 and AWS D1.1. Managed under the Department of Defense and W2SN Endist Japan, the project falls under NAICS code 332312. The solicitation was posted on November 12, 2026, with a response deadline set for December 11, 2026. All performance of the contract will take place within Japan.

General Info

Agency

Department Of Defense → W2SN Endist Japan

NAICS

332312 - Fabricated Structural Metal Manufacturing

Place of Performance

AP, JPN

Set-Aside

NONE

Documents

This scope was carved out of W912HV27Z0002.

The full solicitation package (2 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

DLA DWCF B1907 Backup Power Generator, Yokosuka, Japan

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedNov 12

subcontract

Response DeadlineDec 11

Submission deadline

Response Deadline

12/11/2026, 02:59:00 PM UTCin 28 days

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → W2SN Endist Japan

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → W2SN Endist Japan

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Fabricates and installs structural steel for prime contractors on USACE projects in Yokosuka, Japan. Constructs platforms, stairs, and railings using JIS G 3101 steel. Performs hot-dipped galvanizing and welding per JIS Z 3420 and AWS D1.1. Delivers installed equipment platforms and protective railings per Spec Section 05 51 00.

Similar Contracts

Same NAICS industry code

Recycling Container Supply & ManagementThis subcontract involves the supply and management of recycling containers for prime contractors working on California Department of Corrections and Rehabilitation projects. The selected provider is responsible for the delivery, installation, and ongoing maintenance of 3-Yard Tilt Bins and 40-Yard Roll-off Bins at designated institution locations. All containers must feature hinged lids and segregation compartments, constructed from either plastic or metal in accordance with specific schematic requirements. The opportunity is categorized under NAICS code 332312 and is managed by the state of California. Interested parties must submit their responses by the deadline of December 16, 2026. This contract ensures that CDCR facilities are equipped with the necessary infrastructure to handle waste segregation and recycling efficiently across various project sites.

California Department of Corrections & Rehabilitation

POSTED

about 11 hours ago

DEADLINE

in about 1 month

Custom Brackets, Mounts, and Hardware FabricationThis subcontract agreement involves the fabrication and supply of custom-made metal components, including brackets, mounts, and plates, for prime contractors working on OC Public Works fleet projects. The scope of work requires the production of hardware tailored to specific vehicle makes, models, and trims, utilizing professional welding, cutting, and bending equipment. To ensure durability and longevity, all components must be manufactured using corrosion-resistant metals and specialized coatings. The contract is categorized under NAICS code 332312 and is managed by OC Public Works in California. Interested parties must adhere to the response deadline of December 1, 2026. The primary objective is the delivery of finished, custom-fabricated hardware that is fully compatible with the target vehicle specifications provided for the fleet projects.

OC Public Works

POSTED

about 15 hours ago

DEADLINE

Miscellaneous Metal FabricationsThis subcontract for Miscellaneous Metal Fabrications involves the supply and installation of miscellaneous steel framing and supports for prime contractors working on municipal projects for the City of Cambridge. The scope of work includes the fabrication of galvanized steel framing specifically for mechanical and electrical equipment, as well as the shop priming of ferrous metals. To qualify, providers must possess the necessary welding certifications and have established hot-dip galvanizing capabilities to ensure the delivery of fully installed steel supports. Managed by Capital Buildings Projects in Massachusetts, the opportunity was posted on November 12, 2026, with a response deadline of December 17, 2026. The project falls under NAICS code 332312 and requires the contractor to handle the entire process from fabrication to final installation on-site.

Capital Buildings Projects

POSTED

about 16 hours ago

DEADLINE

in about 1 month

Metal Fabrications Supplier/InstallerThis subcontract opportunity is for a Metal Fabrications Supplier/Installer to provide and install miscellaneous steel framing for prime contractors working on City of Cambridge facility projects. The scope of work includes the delivery and installation of galvanized steel framing and supports for mechanical and electrical equipment, as well as the shop priming of ferrous metal. Qualified contractors must hold AWS D1.1, D1.3, D1.6, or D1.2 welding certifications and provide a PE seal for any delegated design requirements. This project is managed by Capital Buildings Projects in Massachusetts, with a response deadline set for December 3, 2026.

Capital Buildings Projects

POSTED

about 16 hours ago

DEADLINE

Gasket Supply (NSN 5330011926349)This subcontract involves the manufacture or sourcing of 108 specialized gaskets for prime contractors supporting the Defense Logistics Agency Weapons Support Strategic Acquisition Program Directorate. The required components are identified by NSN 5330011926349 and Woodward HRT Inc Part Number 26000211. The contractor must ensure all units are completed, marked, and packaged in strict accordance with MIL-STD-2073-1E, MIL-STD-129, and DLA packaging requirements under RP001. This procurement falls under NAICS code 332312 and is managed through the Department of Defense.

DLA WEAPONS SUPPORT STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 18 hours ago

DEADLINE

Aluminum Windshield Center Retainer ManufacturingThis subcontract opportunity, managed by the DLA Weapons Support Strategic Acquisition Program Directorate under the Department of Defense, involves the fabrication and supply of aluminum alloy metal molding for windshield center retainers. The selected provider will manufacture these components to meet the specific requirements of NSN 2590-01-188-3225 and the DLA Master List of Technical and Quality Requirements. All finished products must be packaged according to ASTM D3951, marked per MIL-STD-129, and palletized following RP001 standards for delivery to prime contractors. The procurement is designated as a Total Small Business Set-Aside under NAICS code 332312. Interested parties must submit their responses by November 27, 2026, following the posting date of November 12, 2026. This contract focuses on the precise delivery of specialized metal molding to support ongoing DLA supply chain operations.

DLA WEAPONS SUPPORT STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 18 hours ago

DEADLINE

Supply of COVER LOWER (NSN 4810-01-4687590)This subcontract involves the procurement of 31 units of the COVER LOWER component, identified by Part Number 7250060 and NSN 4810-01-4687590, for the DLA Weapons Support Nuclear Reactor Program under the Department of Defense. The selected provider is responsible for manufacturing or sourcing the hardware to meet strict technical specifications and ensuring all items are packaged in accordance with MIL-STD-2073-1E standards for delivery to a designated government facility. The opportunity is designated as a Women-Owned Small Business Set-Aside under NAICS code 332312. Interested parties must submit their responses by November 27, 2026, following the posting date of November 12, 2026.

DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

about 18 hours ago

DEADLINE

Supply of Access Covers (NSN 5340007058039)This subcontract involves the fabrication and supply of 153 specialized access covers under NSN 5340007058039 for the Department of Defense Land Supply Chain. The contractor is required to manufacture these units according to strict technical specifications using ISO 9001:2015 quality systems, with packaging and marking adhering to MIL-STD-2073-1E and MIL-STD-129 standards. Performance of the contract will take place in Tracy, California. To ensure the security of ITAR and EAR technical data, the provider must maintain CMMC Level 2 and NIST SP 800-171 compliance, as well as certification through the US/Canada Joint Certification Program. The procurement falls under NAICS code 332312 and is intended to support prime contractors fulfilling Defense Logistics Agency supply requirements.

LAND SUPPLY CHAIN

POSTED

about 18 hours ago

DEADLINE

Corrosion Preventive Anode SupplyThis subcontract with the Department of Defense DLA Weapons Support Nuclear Reactor Program involves the manufacture or sourcing of 1,196 corrosion preventive anodes. The supplier is responsible for ensuring all units meet specific NSN and FSC technical specifications and must adhere to strict packaging, marking, and palletization standards according to MIL-STD-129, MIL-STD-2073-1E, and RP001 DLA requirements. The use of additive manufacturing is permitted provided it undergoes an ESA evaluation. The contract is categorized under NAICS code 332312 and requires delivery of the total unit count FOB Origin. Performance for this contract is centered in Bremerton, Washington. Interested parties must have responded by the deadline of November 23, 2026.

DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

about 18 hours ago

DEADLINE

Mounting Plate Fabrication and Supply (NSN 5340012646860)This subcontract involves the fabrication and supply of mounting plates for prime contractors supporting the Defense Logistics Agency Weapons Support Strategic Acquisition Program Directorate. The contractor is responsible for producing plates according to NSN 5340012646860 and specific government drawings, ensuring that all components are free of mercury content. Quality control must be maintained through sampling and inspection in accordance with MIL-STD-1916 or ASQ H1331. Additionally, the contractor must adhere to MIL-STD-129 for marking and MIL-STD-2073-1E and RP001 for packaging requirements prior to the delivery of the finished mounting plates.

DLA WEAPONS SUPPORT STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 18 hours ago

DEADLINE

Cold Drawn Round Steel Bar SupplyThis subcontract involves the supply of cold drawn round steel bars to prime contractors supporting the Defense Logistics Agency. The scope of work requires the sourcing or manufacture of steel bars with a 1018/1020 composition, specifically featuring a 2.000 inch diameter and lengths ranging from 18 to 20 feet. The contractor is responsible for delivering 20.000 feet of the specified metal bars along with a mandatory Certificate of Quality Compliance for every shipment sent to the customer or DLA depot. This procurement falls under NAICS code 332312 and is managed through the Department of Defense.

Defense Logistics Agency

POSTED

about 18 hours ago

DEADLINE

Engine Accessory Bracket Manufacturer/SupplierThis subcontract involves the manufacture and supply of 286 engine accessory brackets, specifically identified by NSN 5342012529503, for prime contractors supporting DLA supply contracts. The supplier is responsible for ensuring all units meet strict technical specifications and must possess a valid CAGE code and UEI to be eligible. Performance will take place in Anniston, with deliveries handled FOB Origin in accordance with First Destination Transportation program requirements. Managed by the Department of Defense under the DLA Weapons Support ASC Supplier Oper AE and AF Div, the contract falls under NAICS code 332312. The solicitation was posted on November 12, 2026, with a response deadline of November 20, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 18 hours ago

DEADLINE

More opportunities from Department Of Defense → W2SN Endist Japan

Same awarding agency

Specialized Metal Products SupplyThis subcontract opportunity, managed by W2SN Endist Japan under the Department of Defense, involves the manufacture and delivery of specialized metal components for USACE projects located in Yokosuka, Japan. The scope of work requires the production of cast iron wheel guards, diamond-mesh window and door guards, and aluminum expansion joint covers. All deliverables must adhere to JIS G standards and Spec Section 10 26 00, with the contractor responsible for delivering the finished products directly to the project site. The solicitation was posted on November 12, 2026, with a response deadline of December 11, 2026. Classified under NAICS code 332322, this contract is specifically designed for suppliers capable of meeting rigorous technical specifications for metal products within the Japanese theater of operations.

Sheet Metal Work Manufacturing

POSTED

about 23 hours ago

DEADLINE

Site Demolition and EarthworkThis subcontract for Site Demolition and Earthwork involves performing site preparation for prime contractors on USACE projects located in Yokosuka, Japan. The scope of work includes the saw-cutting and removal of asphalt and concrete, as well as comprehensive excavation and backfilling services to deliver a cleared and graded site. To ensure safety and accuracy during utility location, the contractor is required to utilize X-ray or Ground Penetrating Radar and must strictly adhere to EM 385-1-1 Section 17 standards. Managed under the Department of Defense through W2SN Endist Japan, the project falls under NAICS code 238910. Interested parties must submit their responses by the deadline of December 11, 2026.

Site Preparation Contractors

POSTED

about 23 hours ago

DEADLINE

Concrete Foundations and PadsThis subcontract for Concrete Foundations and Pads involves performing cast-in-place concrete work for prime contractors on USACE projects located in Yokosuka, Japan. The scope of work includes the preparation of 150mm compacted gravel bases and the pouring of concrete slabs with a minimum thickness of 200mm, incorporating 152mm by 152mm mesh reinforcement and 15mm chamfered edges. All work must strictly adhere to Spec Section 03 30 00 to deliver finished concrete pads specifically for generators, transformers, and switchgear. Managed under the Department of Defense through W2SN Endist Japan, the project falls under NAICS code 238110. The solicitation was posted on November 12, 2026, with a response deadline set for December 11, 2026.

Poured Concrete Foundation and Structure Contractors

POSTED

about 23 hours ago

DEADLINE

Independent Electrical Testing and CommissioningThis subcontract opportunity is for an independent, accredited organization to provide specialized electrical testing and commissioning services for USACE projects in Yokosuka, Japan. The scope of work involves performing low-voltage and medium-voltage cable insulation integrity tests, conducting apparatus inspections, and executing power system studies for prime contractors. The selected contractor is required to deliver certified electrical test reports and commissioning data in strict accordance with Spec Section 26 08 00. This requirement is issued under the Department of Defense via W2SN Endist Japan, with a response deadline set for December 11, 2026.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

about 23 hours ago

DEADLINE

Medium Voltage Electrical InfrastructureThis subcontract for Medium Voltage Electrical Infrastructure involves the installation of medium voltage electrical distribution for prime contractors on USACE projects located in Yokosuka, Japan. The scope of work includes the installation of metal-clad switchgear, pad-mounted liquid-filled medium-voltage transformers, and medium-voltage cabling to deliver a fully energized distribution system. To ensure system reliability and safety, the contractor is required to perform high-potential insulation integrity tests in accordance with IEEE 14.1-1996 and JIS C standards. This project is managed under the Department of Defense through W2SN Endist Japan and falls under NAICS code 238210.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

about 23 hours ago

DEADLINE

Backup Power Generator & Fuel System InstallationThis subcontract involves the installation of backup power generation systems for prime contractors on USACE projects located in Yokosuka, Japan. The scope of work requires the supply and installation of an 880-kW generator and a 5,000-gallon fuel tank, including all necessary fuel piping. To ensure system integrity, external fuel piping must undergo pressure tests at 150 percent of the maximum working pressure in accordance with NFPA 30 standards. The project is managed under the Department of Defense through W2SN Endist Japan and mandates strict adherence to EM 385-1-1 safety standards. The ultimate objective is the delivery of a fully operational backup power and fuel storage system. Interested parties should note the response deadline of December 11, 2026.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

about 23 hours ago

DEADLINE

DLA DWCF B1907 Backup Power Generator, Yokosuka, Japan

Solicitation # W912HV27Z0002

The U.S. Army Corps of Engineers, Japan District, is conducting market research for a Design-Bid-Build project to install a backup power generator at Building 1907 in Yokosuka, Japan. The project aims to provide reliable backup power for at least ten years, supporting future loads including five new VLMs, four conveyor elevators, and increased server room capacity. The estimated project magnitude is between 500 million and 2 billion Japanese Yen, with an anticipated period of performance of 518 calendar days. The government intends to issue an Invitation for Bid solicitation approximately in May 2027. This opportunity is strictly limited to local sources physically located and licensed to conduct business in Japan. Prospective offerors must possess a Japanese civil construction (doboku isshiki koji) or architectural construction (kenchiku isshiki koji) license, verifiable via the Ministry of Land, Infrastructure, Transport and Tourism website. Key requirements include compliance with EM 385-1-1 safety standards, the use of U.S.-flag vessels for sea transport, and adherence to strict hazardous material packaging and labeling regulations. The contractor must provide a dedicated QC Manager and a Site Safety Health Officer, and all electrical testing must be performed by an independent, accredited organization.

Power and Communication Line and Related Structures Construction

POSTED

about 23 hours ago

DEADLINE

RENOVATE MILITARY FAMILY HOUSING TOWER 4511, CAMP COURTNEY

Solicitation # W912HV26BA009

Solicitation W912HV26BA009 is an invitation for bid issued by the Department of Defense, specifically the W2SN Endist Japan office, for the renovation of Military Family Housing Tower 4511 located at Camp Courtney in Okinawa, Japan. The project falls under NAICS code 236118. A site visit was conducted on June 11, 2026, with various construction firms in attendance to review the project requirements. The procurement process has undergone several modifications via six amendments. These updates include multiple extensions of the bid submission deadline, with the final due date established as December 10, 2026, at 1:45 PM Japan Standard Time, followed by a bid opening at 2:00 PM JST. Additional changes included the release of Request for Information responses, updated specifications and drawings, and the provision of as-built drawings and site visit photos for informational purposes. Notably, Amendment 0005 revised the bid coversheet for CLIN 0005, updating the quantity to 2,000 square meters and changing the unit of measure from Job to Square Meter, while also adding variation in estimated quantity language to Section 00 73 00.

Residential Remodelers

POSTED

DEADLINE

AFHC Repair Quarters 82 and 86, Camp Zama, Japan

Solicitation # W912HV26BA019

Solicitation W912HV26BA019, issued by the Department of Defense W2SN Endist Japan, is for the FY27 AFHC Repair of Quarters 82 and 86 at Camp Zama, Japan. The project scope involves the repair of nine 3-bedroom or 4-bedroom units designated for junior noncommissioned officers and enlisted grades E1 through E6. Key technical requirements include structural and architectural repairs, specifically the construction of fire riser rooms with concrete wall footings, interior distribution system electrical installations, and exterior repainting limited to areas affected by demolition and repair. The project is classified as a DO-rated order under the Defense Priorities and Allocations System. The procurement process has been managed through the PIEE Solicitation Module, with multiple amendments issued to adjust the timeline. The final bid response deadline was extended to December 11, 2026. Technical compliance requires adherence to specific standards, including JIS C 8340 or JIS C 8435 for electrical outlet boxes and the acceptance of JCI Authorized Concrete Engineer certification as an equivalent to ACI Grade I. Contractors must comply with strict site access, security, and noise restrictions detailed in the specifications, and any alternative Japanese standard products must receive written approval from the Contracting Officer, Ruben Romero.

Residential Remodelers

POSTED

DEADLINE

Vehicle Recompete: OKINAWA CONSTRUCTION MATOC PROGRAM — INDEFINITE DELIVERY / INDEFINITE QUANTITY W912HV20R0002The Okinawa Construction MATOC Program is an indefinite delivery, indefinite quantity vehicle managed by the Department of the Army. The current ordering period for vehicle W912HV20R0002 is set to end on April 21, 2028. This program is classified as a full recompete and currently supports 33 active task orders with a total combined value of over 75 million dollars. Ten different companies hold awards under this solicitation, with American Engineering Corporation leading as the primary incumbent with over 35 million dollars across 12 orders. Other significant contributors include Seikitokyu Kogyo-Yabu Doken JV and Witco Industries Ltd. Major projects under this vehicle include the repair of munitions support buildings, waterfront repairs at White Beach Fuel Pier, and various HVAC and transformer replacements across multiple camps in Okinawa.

Commercial and Institutional Building Construction

POSTED

DEADLINE

Fuel Pad and Containment ConstructionThis subcontract for Fuel Pad and Containment Construction involves the development of reinforced concrete pads and secondary containment berms for fuel tanks on USACE Japan District fuel site projects. Working under prime contractors for the Department of Defense via W2SN Endist Japan, the selected provider will be responsible for formwork, rebar installation, and the pouring of fuel-resistant concrete utilizing specific additives and USACE specifications. Additionally, the scope of work includes asphalt paving for access roads to ensure full site functionality. The project falls under NAICS code 238110 and requires the delivery of completed concrete pads and containment structures. The solicitation was posted on October 19, 2026, with a response deadline set for September 30, 2027.

Poured Concrete Foundation and Structure Contractors

POSTED

DEADLINE

Fuel System Electrical and InstrumentationThis subcontract for Fuel System Electrical and Instrumentation involves the installation of electrical power and control systems for fuel pumps and monitoring sensors on USACE Japan District fuel site projects. The scope of work includes wiring dispensing units, installing leak detection alarms, and integrating fuel management hardware. All work must be performed by licensed electricians using explosion-proof electrical fittings and adhering to Class I, Div 1 wiring standards per NFPA 70 to deliver a fully operational system. Managed by W2SN Endist Japan under the Department of Defense, the project falls under NAICS code 238210. The solicitation was posted on October 19, 2026, with a response deadline set for September 30, 2027.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

DEADLINE

Earlier notices in this NAICS code

Posted before this notice, open and closed

Experimental Stainless Steel Transition Fabrication

NASA Shared Services Center

POSTED

about 23 hours ago

DEADLINE

Supply of Breakaway Fuel Valves

Aviation Logistics Center (ALC)(00038)

POSTED

about 23 hours ago

DEADLINE

USS PINCKNEY (DDG-91) Helo Hanger Door Replacement Parts

Solicitation # N5523627R0009

Southwest Regional Maintenance Center

POSTED

about 23 hours ago

DEADLINE

Manufacturing of Restricted Source Butt Hinges (NSN 5340-00-34-27149)

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

Metal Grille Supply (NSN 1660017143102)

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

Machine Screw Supply (NSN 5305008938390)

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Supply of Self-Locking Clinch Nuts

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Collapsible Equipment Rack 40 Supply

CONSTRUCTION & EQUIPMENT CONTAINERS

POSTED

DEADLINE

Cable Reel Fabrication and Supply (NSN 3830-01-276-1485)

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

DEADLINE

Structural Angle (NSN 9520-0027-74913) Supply

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

DEADLINE

Structural Steel Angle Supply

Defense Logistics Agency

POSTED

DEADLINE

Cold Rolled Steel Bar Supplier

RED RIVER RECEIVING BLDG

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Get full access

Join 750+ contractors already using CLEATUS