Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

INDICATOR, DIGITAL D

Active
SPE4A6-26-T-07ASFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract specifies the procurement of four units of a digital indicator, part number 138C086H07, identified by NSN 6625-00-619-3132, under solicitation SPE4A6-26-T-07AS. The item is classified as a restricted source requiring government engineering source approval and is designated as a critical application item, with configuration control mandated per MIL-STD-973 due to its status as a Navy field-level reparable. It may contain batteries and must comply with all DLA Master List of Technical and Quality Requirements, which supersede any conflicting commercial standards. The use of Class I ozone-depleting chemicals is strictly prohibited, and any substitute chemicals must be submitted for approval unless explicitly authorized. Packaging must adhere to DLA Packaging Requirements (RP001) and MIL-STD-129 labeling, with hazardous materials conforming to TQ Requirement IP025 and non-hazardous items packaged per ASTM D3951, subject to DLA requirements. The item must be delivered FOB origin with no quantity variance permitted, and inspection and acceptance occur at destination. Delivery is due in 332 days, with an original required delivery date of June 22, 2027. All shipments must be sent to the DLA Distribution facility in New Cumberland, Pennsylvania, following DLAD Procurement Notes C19 and C20 for transportation. The unit of issue is each (EA), and the purchase request number is 7017528512.

General Info

Procure four restricted-source digital indicators, NSN 6625-00-619-3132, FOB origin, deliver by June 22, 2027, to New Cumberland, PA.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

334514 - Totalizing Fluid Meter and Counting Device ManufacturingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(1)

RFQ SPE4A6-26-T-07AS for DLA Aviation

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC COMMODITIES DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC COMMODITIES DIVISION
View Agency Profile
Office AddressUS
Contacts
Amanda Thomas
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
INDICATOR,DIGITAL D
INDICATOR,DIGITAL DISPLAY
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ035: ITEM MAY CONTAIN BATTERIES
RQ002: CONFIGURATION CHANGE MANAGEMENT ENGINEERING CHANGE PROPOSAL
REQUEST FOR VARIANCE (DEVIATION OR WAIVER)
NOTE: THIS IS A RESTRICTED SOURCE ITEM AND
REQUIRES ENGINEERING SOURCE APPROVAL BY THE
GOVERNMENT DESIGN CONTROL ACTIVITY.
SINCE THIS NSN IS A NAVY FIELD LEVEL REPARABLE
ITEM CONFIGURATION CONTROL MUST BE MAINTAINED
PER MIL-STD-973.
CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE
USED NOR INCORPORATED IN ANY ITEMS TO BE
DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION
SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT
DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS.
SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR
APPROVAL UNLESS THEY ARE AUTHORIZED BY THE
SPECIFICATION REQUIREMENTS.
CRITICAL APPLICATION ITEM
NORTHROP GRUMMAN SYSTEMS CORPORATION 97942 P/N 138C086H07
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
SPE4A6-26-T-07AS
SECTION B
PR: 7017528512 PRLI: 0001 CONT’D
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017528512 0001 EA 4.000
NSN/MATERIAL:6625006193132
DELIVERY (IN DAYS):0332
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313,
PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025.
IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH
FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE
WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
Need Ship Date:06/22/2027 Original Required Delivery Date:06/22/2027
SPE4A6-26-T-07AS NSN/Part Number: 6625-00-619-3132 Quantity: 4 EA Purchase Request: 7017528512QTY: 4 Delivery: 332 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 334514
New
DIBBS
ADAPTER SET, ENGINEThe contract solicitation SPE7L3-26-Q-1193 is for the procurement of 101 units of an Adapter Set, Engine with NSN 4910-01-573-6609 under a Firm Fixed Price term with no variance allowed in quantity. Delivery is required 199 days after award with FOB origin and inspection and acceptance occurring at destination. All supplies must comply with DLA’s Master List of Technical and Quality Requirements, which supersede other standards including ASTM D3951, and packaging must adhere to MIL-STD-129 for marking and labeling with palletization following RP001 requirements. The use of Class I ozone-depleting chemicals is strictly prohibited, and any substitute chemicals must be pre-approved unless explicitly authorized by specifications. The contractor is required to perform a Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment and must comply with all Covered Defense Information protocols. The item is to be shipped to the DLA Distribution facility at New Cumberland, Pennsylvania, and the contract is governed by DoD unit of issue standards with pricing and delivery details tied to the purchase request 7014423341 and a mandatory delivery date of August 30, 2026.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 15 hours ago

DEADLINE

in 6 days
View Details
NAICS: 334514
New
Federal
49--ADAPTER SET,ENGINEThe U.S. Department of Defense, through DLA Land and Maritime, is seeking to procure 101 adapter sets for engines under NSN 4910015736609, with delivery required to W1A8 DLA Distribution within 199 days of award. The solicitation, identified as SPE7L326Q1193, is a combined RFQ open to all responsible sources and is exclusively available electronically via the provided SAM.gov link; no hard copies or technical specifications, plans, or drawings are provided. The approved source for this item is designated as RD-6-5281-0 with vendor code 62534. Quotes must be submitted electronically prior to the deadline of July 24, 2026, and are subject to evaluation based on timeliness and compliance. The procurement falls under NAICS code 334514 and is managed by the office located in Columbus, Ohio, with all inquiries directed to the point of contact listed in the solicitation document accessible through the Additional Information link on the SAM.gov portal.
DLA Land And Maritime

POSTED

about 20 hours ago

DEADLINE

in 6 days
View Details
NAICS: 334514
New
Federal
IND TUBULAR GAGE GLThis solicitation, issued under Emergency Acquisition Authority, seeks repair services for the IND TUBULAR GAGE GL under a firm-fixed-price arrangement with a required Repair Turnaround Time of 116 days, measured from physical receipt of the asset at the contractor’s facility as recorded in the Commercial Asset Visibility system. The contract mandates Government Source Inspection, FOB Origin freight terms, and strict adherence to repair standards outlined in contractor manuals and government-approved technical documents, with part substitutions strictly prohibited without written approval. The solicitation has been amended to increase the quantity from one to two units, update clauses in alignment with the FAR overhaul, and revise pricing thresholds. Contractors must quote unit and total prices along with their RTAT and, if unable to meet the government’s timeline, provide capacity constraints. A price reduction per unit per month applies for unexcused delays, with a specified cap, and failure to meet RTAT may result in termination for default without limiting other government remedies. The contract requires compliance with Buy American and AbilityOne provisions, mandatory use of Workflow Pro, and adherence to security exclusions and annual certifications. The awardee must provide their CAGE code, inspection and performance facility details, and compare the repair price to the cost of a new unit. Records of all inspection activities must be maintained for 365 days after final delivery. Packaging must conform to MIL-STD-2073, and all repairs must meet operational requirements tied to the specified CAGE codes and reference numbers. The solicitation is bilaterally executed, contingent on the contractor’s written acceptance, and responses are due by August 14, 2026, with accelerated delivery encouraged. The Government handles all freight through the Commercial Asset Visibility program, and contractors must accurately report all asset transactions within five business days of receipt.
Navsup Weapon Systems Support Mech

POSTED

about 20 hours ago

DEADLINE

in 28 days
View Details
NAICS: 334514
New
DIBBS
Supply of Utility Shop Equipment (NSN 4940-01-633-1668)One unit of commercial utility shop equipment identified by NSN 4940-01-633-1668 is to be supplied and delivered to Tracy, California, with a delivery deadline of 79 days from contract award. The transaction is governed by FOB origin terms, meaning the buyer assumes responsibility for the equipment once it leaves the seller’s facility. The contract falls under NAICS code 334514, indicating classification within the commercial and industrial machinery and equipment manufacturing sector. It is designated as a subcontract and was posted on July 16, 2026, with responses due by July 27, 2026. The ordering agency is the Fluid Handling Division under the Department of Defense, and the place of performance is specified with a zip code of 95304-5000.
FLUID HANDLING DIVISION

POSTED

1 day ago

DEADLINE

in 9 days
View Details
NAICS: 334514
New
DIBBS
Supply of LEAD, TEST (NSN 6625-01-226-7799, P/N 69105)The contract calls for the procurement and delivery of one commercial off-the-shelf electronic test lead identified by NSN 6625-01-226-7799 and part number 69105, with full packaging and labeling requirements included. The item must be shipped FOB origin to West Monroe, Louisiana, with a zip code of 71292-2420, ensuring all delivery terms are met upon arrival at the specified location. The solicitation, issued under the Department of Defense’s Maritime Supply Chain, is classified as a subcontract and falls under NAICS code 334514, indicating the manufacturing of electronic components and related products. The posting date for this opportunity is July 16, 2026, with a firm response deadline of July 27, 2026, leaving a 11-day window for potential vendors to submit their proposals. While no solicitation number is provided, the official reference link directs to the DIBBS platform where detailed submission guidelines and requirements can be accessed. There is no set-aside designation indicated, meaning the contract is open to all eligible suppliers without restriction based on business size or category, and no point of contact details are listed in the available data.
MARITIME SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 9 days
View Details
NAICS: 334514
New
DIBBS
Digital Display Indicator SupplyThe contract entails the procurement and delivery of four digital display indicators identified by NSN 6625-00-619-3132, with all units required to meet applicable military standards and regulatory specifications. The solicitation is issued under the NAICS code 334514 and is structured as a subcontract, with performance to occur at New Cumberland, Pennsylvania, postal code 17070-5002. The opportunity was posted on July 16, 2026, and responses are due by July 24, 2026, giving potential vendors a limited window to submit proposals. The contracting entity is the ASC Commodities Division under the Department of Defense, and the full details can be accessed through the designated DIBBS platform link. No specific set-aside designation or point of contact is provided, suggesting the opportunity is open to qualified subcontractors without restriction.
ASC COMMODITIES DIVISION

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 334514
New
DIBBS
Spill Berm Kit Manufacturing and AssemblyThe contract requires the full production of 1,000 spill containment berm kits under NSN 4940-01-620-2602, encompassing all stages from fabrication to final packaging and preservation in strict compliance with military standards. Each kit must be properly labeled and assembled to meet operational requirements for field deployment, ensuring readiness and reliability under demanding conditions. The work is to be performed at a designated location in Texarkana, with the zip code 75507-5000 serving as the official place of performance. Issued by the Fluid Handling Division of the Department of Defense, this subcontract is classified under NAICS code 334514 and was posted on July 16, 2026, with a response deadline of July 27, 2026. While no set-aside classification or point of contact is specified, the procurement remains open to qualified subcontractors capable of meeting the technical and logistical demands of military-grade manufacturing. All deliverables must adhere to the exact specifications outlined by the agency to ensure compatibility and performance in defense and emergency response operations.
FLUID HANDLING DIVISION

POSTED

1 day ago

DEADLINE

in 9 days
View Details
NAICS: 334514
New
DIBBS
Commercial Item Manufacturing or Supply (Relay and Switchgear)The contract seeks the manufacture or supply of commercial electronic items, specifically relay and switchgear systems, under strict configuration control and cybersecurity compliance standards for defense applications. These items are expected to be battery-powered and must meet the technical and security requirements necessary for use in military environments, ensuring reliability, interoperability, and protection against cyber threats throughout their lifecycle. The scope falls under the NAICS code 334514, indicating classification within the manufacturing of electronic components and products. This is a total small business set-aside subcontract under the SBA program, reserved exclusively for small business concerns as defined by federal regulations. The solicitation was posted on July 16, 2026, with responses due by July 27, 2026, and the performance location is designated as New Cumberland, Pennsylvania, with a zip code of 17070-5002. The contract is managed by the Maritime Supply Chain under the Department of Defense, requiring proposers to demonstrate capability in producing compliant commercial items that align with defense-specific standards while maintaining strict adherence to small business eligibility criteria.
MARITIME SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 9 days
View Details
NAICS: 334514
New
DIBBS
Supply and Delivery of Liquid Transmitter (NSN: 6680015671489)One liquid transmitter unit, identified by NSN 6680015671489 and manufacturer part number AT227937, is to be supplied and delivered to Camp Lejeune, North Carolina, with a mandatory delivery deadline of July 27, 2026. The item must conform precisely to all technical specifications and be shipped using a traceable carrier to ensure Accountability throughout transit. The contract falls under the NAICS code 334514 and is issued as a subcontract by the Defense Logistics Agency under the Department of Defense. The agreement is tied to award SPS7LX22D0068 with delivery tracking referenced by DLV SPE7L126FAU0P and contract number 53133. The solicitation was posted on July 16, 2026, and full compliance with federal procurement standards is required.
Defense Logistics Agency

POSTED

1 day ago

DEADLINE

N/A
View Details
NAICS: 334514
New
DIBBS
Precision Sensor Manufacturing – Velocity and Angular TransducersThe contract seeks the manufacture and supply of twelve kits of velocity and angular transducers, identified by Part Number 14002084 and NSN 6680017277487, to meet military specifications. The deliverables must include complete packaging and labeling that comply with all relevant defense standards, ensuring operational readiness and traceability in military logistics. The work is to be performed under a subcontract arrangement, with place of performance designated as New Cumberland, PA, 17070-5002, and the procuring activity is the ASC Commodities Division under the Department of Defense. The solicitation was posted on July 16, 2026, with a mandatory response deadline of July 24, 2026, providing a limited window for potential suppliers to submit proposals. The NAICS code 334514 indicates classification under the instrumentation manufacturing sector, specifically for electro-medical and electro-therapeutic apparatus manufacturing, suggesting precision engineering requirements. All submissions must adhere to the technical and compliance criteria outlined in the military specifications for these sensors, and the contract is accessible via the DIBBS portal for authorized participants.
ASC COMMODITIES DIVISION

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 334514
New
DIBBS
LEAD, TESTThis contract pertains to the procurement of a single commercial off-the-shelf item identified by NSN 6625-01-226-7799 and part number 69105, supplied by KLEIN TOOLS INC ZAH GROUP INC DIV 3X6M9. The requirement is for one unit to be delivered within 20 days of contract award, with delivery terms set at FOB origin and inspection and acceptance occurring at the destination. Packaging must comply with MIL-STD-2073-1E and marking must adhere to MIL-STD-129, with no special marking required. Palletization and overall packaging follow DLA’s standard requirements, and hazardous materials handling protocols are applicable. The item is to be shipped via traceable means, excluding parcel post, to the designated freight address in West Monroe, Louisiana. The procurement is governed under solicitation SPE7M1-26-T-214A, which incorporates technical and quality requirements from the DLA Master List of Technical and Quality Requirements linked in the document. The contract enforces zero tolerance for quantity variance and specifies the unit of issue as EA. The supplier must meet all packaging, labeling, and shipping directives, including the use of approved containment, cushioning, and packaging codes. The delivery is tied to an original required date of September 22, 2025, though the solicitation was posted in 2026 with a response deadline in the same year, indicating a potential scheduling anomaly. The point of contact is Lanette Lipscomb of the Department of Defense’s Maritime Supply Chain, and the contracting activity is managed through the DLA’s electronic procurement systems, with all logistical data coordinated under federal use identifiers including IPD, DIC, and DIST codes.
MARITIME SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 9 days
View Details
NAICS: 334514
New
DIBBS
TRANSDUCER, VELOCITYThe contract specifies the procurement of 12 kits of a velocity transducer, angular type, with part number 14002084 and NSN 6680017277487, supplied by Fairbanks Morse, LLC. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced via R or I numbers, with the applicable revision controlled by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless an amendment updates it. Packaging must comply with MIL-STD-2073-1E and DLA packaging standards, including specific methods for preservation, wrapping, and containerization, while marking adheres to MIL-STD-129 with no special marking codes. Unit identification is not required per the service customer’s request, and DFARS 252.211-7003(c)(1)(i) applies. Sampling follows MIL-STD-1916 or ASQ H1331 Table 1 with zero defect acceptance unless otherwise specified, and attributes are assigned verification levels or AQLs of VII, IV, II for critical, major, and minor characteristics respectively. Delivery is FOB origin with a required delivery date of April 13, 2027, and a lead time of 262 days. Inspection and acceptance occur at the destination facility at 2083 Normandy Drive, Door 113 to 134, New Cumberland, PA 17070-5002. The quantity has no variance allowance and must be delivered exactly as ordered. Transportation guidelines reference DLAD Proc Notes C19 and C20 for freight and first destination handling. The contract number is SPE4A6-26-T-07FY, issued by the ASC Commodities Division under the Department of Defense, with a NAICS code of 334514. All materials must conform to defined technical, packaging, and marking standards without exception, and nonconforming items are subject to removal per RQ011. The point of contact for inquiries is Katisha Carter, with contact details provided for coordination.
ASC COMMODITIES DIVISION

POSTED

1 day ago

DEADLINE

in 6 days
View Details

More opportunities from Department Of Defense → ASC COMMODITIES DIVISION

Same awarding agency

NAICS: 541330
New
DIBBS
Government First Article Inspection and TestingThe contract requires the performance of a first article inspection and testing on an aircraft structural fitting to ensure full compliance with drawing 7574876. This includes detailed dimensional measurements, verification of material specifications, non-destructive testing, and the preparation of a formal inspection report. All work must demonstrate adherence to the technical requirements outlined in the drawing and meet applicable quality standards for aerospace components. The effort is designated as a subcontract under a Total Small Business Set-Aside, meaning only small businesses can bid, and it is classified under NAICS code 541330, which pertains to engineering services. The solicitation was posted by the ASC Commodities Division of the Department of Defense and is open for response until July 27, 2026, with no specific location provided for performance.
Engineering Services

POSTED

about 15 hours ago

DEADLINE

in 9 days
View Details
NAICS: 332312
New
DIBBS
Precision Manufacturing of Aircraft Structural FittingThe contract involves the precision manufacture of a critical safety aircraft structural fitting identified by Part Number S03-02-R-100, following the specifications outlined in drawing 7574876. The scope encompasses full production lifecycle activities including material sourcing, machining, heat treatment, and surface finishing, all required to meet stringent aerospace industry standards for structural integrity, durability, and safety compliance. All work must be performed in accordance with applicable aerospace quality and inspection protocols to ensure the component meets mission-critical performance requirements. This is a total small business set-aside under the SBA program as defined by FAR 19.5, with the NAICS code 332312 classifying it under forge and stamping manufacturing. The contract is issued under the Department of Defense’s ASC Commodities Division and is structured as a subcontract. Proposals must be submitted by the deadline of July 27, 2026, with the solicitation published on July 17, 2026. All manufacturing activities are expected to adhere to defense supply chain requirements, and the place of performance is not specified, implying flexibility as long as compliance and delivery obligations are met.
Fabricated Structural Metal Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 9 days
View Details
NAICS: 541330
New
DIBBS
Quality Assurance and Inspection at OriginThe contract titled Quality Assurance and Inspection at Origin requires the contractor to perform inspection and acceptance of supplies at the point of production or packaging, in strict adherence to contract clause 52.246-9008. This work is designated as a subcontract under a Total Small Business Set-Aside, meaning only small businesses are eligible to participate as defined by the SBA and FAR 19.5. The NAICS code 541330 identifies the scope as ranging within architectural, engineering, and related services, indicating the nature of the quality assurance activities involves technical oversight and compliance evaluation rather than direct manufacturing. The solicitation was posted on July 17, 2026, with a response deadline of July 27, 2026, and is managed by the ASC Commodities Division within the Department of Defense, though specific point of contact and place of performance details are not provided. The contract emphasizes the importance of ensuring supplies meet required standards prior to shipment, with inspections conducted directly at the origin, which may include facilities across various locations. Compliance with the referenced clause mandates adherence to federal procurement quality assurance procedures, requiring detailed documentation, evaluation criteria, and acceptance protocols to be followed during inspection. The absence of explicit location or contact information suggests the contractor must be prepared to perform at any production or packaging site tied to the supply chain, and the lack of defined city or state for performance implies a potentially nationwide scope requiring logistical flexibility and readiness to deploy inspection personnel as needed. The contract is accessible through the DIBBS portal for further procedural details.
Engineering Services

POSTED

about 15 hours ago

DEADLINE

in 9 days
View Details
NAICS: 541611
New
DIBBS
ITAR/EAR Compliance and Export-Controlled Data HandlingThe contract mandates strict compliance with ITAR and EAR regulations for all suppliers and subcontractors handling export-controlled technical data, ensuring that only authorized entities with proper registration and documentation are engaged in work involving sensitive information. All parties must demonstrate adherence to U.S. export control laws as a condition of participation, with failure to comply potentially resulting in termination or penalties. The solicitation is designated as a Total Small Business Set-Aside under the SBA program, restricting eligibility to small businesses as defined by the NAICS code 541611, which pertains to management consulting services. The award is issued by the ASC Commodities Division under the Department of Defense, with responses due by July 27, 2026, and performance expected to occur under the terms of a subcontract agreement. Participation requires proactive verification of regulatory standing and ongoing compliance monitoring for the duration of the contract.
Administrative Management and General Management Consulting Services

POSTED

about 15 hours ago

DEADLINE

in 9 days
View Details
NAICS: 541611
New
DIBBS
Subcontracting Plan Compliance and Small Business OutreachThe contract requires the development and execution of a federal subcontracting plan designed to ensure compliance with Department of Defense regulations and Small Business Administration guidelines for maximizing participation by disadvantaged, minority, and women-owned businesses. The goal is to meet specific targets for DBE, MBE, and WBE subcontracting as mandated by the Federal Acquisition Regulation and SBA rules, with all activities aligned to a total small business set-aside under FAR 19.5. The work focuses on strategic outreach, monitoring, documentation, and reporting to demonstrate consistent adherence to small business utilization standards throughout the contract performance period. The solicitation, issued under NAICS code 541611 for management consulting services, is administered by the ASC Commodities Division within the Department of Defense and is open for response through July 27, 2026. All subcontracting efforts must be structured to promote equitable access and measurable outcomes for certified small, minority, and women-owned businesses, with full transparency and accountability required in tracking participation. The successful contractor will be responsible for designing, implementing, and sustaining a comprehensive subcontracting strategy that aligns with federal obligations and supports the agency's commitment to small business procurement goals.
Administrative Management and General Management Consulting Services

POSTED

about 15 hours ago

DEADLINE

in 9 days
View Details
NAICS: 332999
New
DIBBS
Critical Safety Item (CSI) Manufacturing and SupplyThe contract involves the manufacture and delivery of Critical Safety Items specified by the U.S. Navy, with stringent requirements for sourcing controls, component traceability, and full compliance with defense-specific technical and quality standards. These items are essential to mission-critical systems and must be produced under strict regulatory oversight to ensure reliability and safety throughout their lifecycle. The procurement is structured as a subcontract under a Total Small Business Set-Aside, meaning only small businesses certified by the Small Business Administration are eligible to respond, and the NAICS code 332999 indicates the work falls under other fabricated metal product manufacturing. All production and delivery activities must adhere to military specifications, and suppliers are expected to implement robust documentation and audit-ready tracking systems for every component and process step. The solicitation was posted on July 17, 2026, with a deadline for responses on July 27, 2026, and is managed by the ASC Commodities Division under the Department of Defense. There is no specified place of performance, suggesting flexibility in manufacturing locations provided all requirements are met, and no point of contact is listed, implying inquiries must be directed through the official DIBBS portal referenced in the link. The nature of the work demands a high level of precision and accountability, with failure to meet traceability or compliance standards likely resulting in disqualification or contract termination. Suppliers must be prepared to demonstrate proven capability in handling sensitive defense components and maintaining data integrity across the supply chain.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 9 days
View Details
NAICS: 541330
New
DIBBS
Quality Inspection and Product Verification TestingThe contract requires the performance of in-process and final inspections on bushing assemblies in accordance with MIL-STD-1916 or ASQ H1331 standards, ensuring compliance with rigorous quality and verification protocols. The contractor is responsible for generating accurate test reports and providing full support to Government acceptance activities, demonstrating consistent adherence to defense-grade quality requirements throughout the production lifecycle. This work is critical to validating the integrity and functionality of components used in defense systems. This is a small business set-aside subcontract under the SBA program, classified under NAICS code 541330, and issued by the ASC Commodities Division of the Department of Defense. The solicitation was posted on July 17, 2026, with a response deadline of July 27, 2026. While specific location details are not provided, the place of performance is tied to defense operations under the DLA umbrella, and all submissions must be made through the designated DIBBS portal. The contract emphasizes the need for qualified small business entities capable of delivering precise inspection services under strict military specifications.
Engineering Services

POSTED

about 15 hours ago

DEADLINE

in 9 days
View Details
NAICS: 483112
New
DIBBS
Domestic and International Freight Logistics (U.S.-Flag Vessel Compliance)The contract requires the arrangement of domestic and international freight logistics for the shipment of bushing assemblies to locations within the continental United States, with strict adherence to U.S.-flag vessel requirements mandated by the Cargo Preference Act for all ocean freight portions. This ensures compliance with federal regulations that prioritize the use of American-owned and flagged vessels for the transportation of government cargo. The solicitation is structured as a subcontract under a Total Small Business Set-Aside designation, exclusively available to small businesses certified by the Small Business Administration, and is classified under NAICS code 483112, which pertains to foreign ocean transportation. The opportunity was posted on July 17, 2026, with a response deadline of July 27, 2026, and is overseen by the ASC Commodities Division of the Department of Defense, with performance tied to U.S. domestic destinations. The requirement emphasizes logistical precision, regulatory compliance, and small business participation in fulfilling defense-related supply chain needs.
Deep Sea Passenger Transportation

POSTED

about 15 hours ago

DEADLINE

in 9 days
View Details
NAICS: 541611
New
DIBBS
Supply Chain Traceability and Documentation ManagementThe contract requires the maintenance of fully auditable records to ensure complete traceability of material origin, certifications, inspections, and adherence to all Government traceability mandates, specifically in compliance with DFARS requirements. All documentation must support transparency and accountability throughout the supply chain, enabling verification of source materials and compliance with defense contracting standards. The contractor must implement systems and procedures capable of sustaining rigorous audit readiness and meeting every contractual obligation related to documentation integrity and regulatory compliance. This is a small business total set-aside subcontract under NAICS code 541611, issued by the Department of Defense’s ASC Commodities Division. Responses are due by July 27, 2026, and performance is expected to align with federal defense supply chain protocols. The contract emphasizes strict adherence to traceability standards and requires proven capability in managing complex documentation systems under federal oversight. While specific location details are not provided, all work must satisfy DoD requirements for origin verification and material accountability.
Administrative Management and General Management Consulting Services

POSTED

about 15 hours ago

DEADLINE

in 9 days
View Details
NAICS: 493190
New
DIBBS
Packaging, Marking, and Labeling ServicesThe contract seeks qualified small businesses to provide military-compliant packaging, preservation, and labeling services for bushing assemblies, adhering strictly to DLA and MIL-STD-129 standards. Essential requirements include accurate barcode application, application of special handling labels, and full compliance with defense logistics protocols to ensure traceability, durability, and readiness for military distribution. The work must be performed in accordance with federal regulations governing packaging integrity and labeling accuracy to support the Department of Defense’s supply chain standards. This is a total small business set-aside under NAICS code 493190, restricted exclusively to small businesses as defined by the SBA, and is issued as a subcontract by the ASC Commodities Division within the Department of Defense. Responses are due by July 27, 2026, with the solicitation posted on July 17, 2026, and all work expected to align with DLA’s logistical demands for defense components. The place of performance and point of contact details are not specified, but all proposals must demonstrate readiness to meet stringent military packaging and documentation requirements without deviation.
Other Warehousing and Storage

POSTED

about 15 hours ago

DEADLINE

in 9 days
View Details
NAICS: 332710
New
DIBBS
Precision Machining of Bushing Assembly (NSN 5365-01-541-2220)The contract pertains to the manufacture and delivery of precision bushing assemblies identified by NSN 5365-01-541-2220, requiring strict adherence to military specifications throughout production. Work includes CNC machining to exact tolerances, comprehensive inspection processes, and full compliance with traceability and packaging standards mandated for defense applications. The contract is structured as a subcontract under a total small business set-aside, reserved exclusively for small businesses as defined by the SBA under FAR 19.5, with the NAICS code 332710 applicable to forged and stamped metal product manufacturing. The opportunity was posted on July 17, 2026, with responses due by July 27, 2026, and is issued by the ASC Commodities Division under the Department of Defense. Performance is expected to occur at an undefined location, and all deliverables must meet federal defense supply chain requirements, ensuring readiness for military use.
Machine Shops

POSTED

about 15 hours ago

DEADLINE

in 9 days
View Details
NAICS: 335931
New
DIBBS
Small Business and DBE/MBE/WBE Subcontracting ParticipationThis contract opportunity is designed to facilitate participation by small, disadvantaged, minority-owned, and women-owned businesses in supply or compliance roles under a prime contract managed by the ASC Commodities Division within the Department of Defense. The solicitation, identified by the NAICS code 335931, focuses on subcontracting engagement and does not specify a set-aside type, meaning it is open to qualified entities meeting ownership and size criteria without formal classification under a specific program. Interested businesses must respond by the deadline of August 16, 2026, to be considered for inclusion in the workforce supporting the prime contract's delivery and compliance requirements. The work will be performed without a specified geographic location, indicating potential flexibility in performance sites. Participation is facilitated through the DIBBS platform, where full details and submission protocols can be accessed.
Current-Carrying Wiring Device Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 29 days
View Details