Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

INDICATOR, FAULT LOCATI

Active
SPE7M1-26-U-4522Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract is for the procurement of an Indicator, Fault Locator identified by NSN 6625-00-375-0538 with a quantity of 38 units, to be delivered FOB origin within 92 days under contract SPE7M1-26-U-4522. The item is classified as a commercial item and is subject to DLA’s Master List of Technical and Quality Requirements, which supersede all other specifications including ASTM D3951. Packaging must comply with RP001 and MIL-STD-129, and if hazardous per FED-STD-313, must adhere to TQ requirement IP025; otherwise, commercial packaging per ASTM D3951 is acceptable. The item is on a Qualified Products List and requires a Form 415. It is a Critical Application Item that may contain batteries and must meet the technical specifications of MIL-PRF-83287G Rev G and MIL-PRF-83287/1D Rev D. Use of Class I ozone-depleting substances in any phase of design, manufacturing, or testing is strictly prohibited without written Contracting Officer approval. Cybersecurity requirements mandate a CMMC Level 2 self-assessment. The unit of issue is each (EA), with no variance allowed in quantity. Inspection and acceptance occur at the destination. All technical and quality requirements referenced by R or I numbers are incorporated in full via the DLA Master List, with the applicable revision controlled by the solicitation or award date as defined for simplified or large acquisitions. The contract is issued by the Department of Defense Maritime Supply Chain under a direct DLA procurement.

General Info

Procure 38 faulty indicator units, FOB origin, 92 days, MIL-PRF-83287G, CMMC Level 2, commercial item, DLA contract.

Agency

Department Of Defense → MARITIME SUPPLY CHAINView Agency

NAICS

334515 - Instrument Manufacturing for Measuring and Testing Electricity and Electrical SignalsView NAICS

Place of Performance

US

Set-Aside

NONE

Documents

(1)

SPE7M1-26-U-4522.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → MARITIME SUPPLY CHAIN
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → MARITIME SUPPLY CHAIN
View Agency Profile
Office AddressUS
Contacts
Bryan Fair
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
INDICATOR,FAULT LOCATING
INDICATOR,FAULT LOCATOR
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RD002, COVERED DEFENSE INFORMATION APPLIES
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
THIS ITEM IS IDENTIFIED AS A COMMERCIAL ITEM (TO INCLUDE 'COMMERCIAL
OF A TYPE')
THE USE OF ANY CLASS I OZONE-DEPLETING SUBSTANCE
(ODS) IN THE DESIGN, MANUFACTURING, TESTING,
CLEANING, OR ANY OTHER PROCESS FOR THIS ITEM
UNDER ANY MILITARY OR FEDERAL SPECIFICATION,
STANDARD OR DRAWING REFERENCED IN THIS ITEM
DESCRIPTION IS "PROHIBITED" UNLESS THE SEPARATE
WRITTEN APPROVAL OF THE CONTRACTING OFFICER IS
OBTAINED. THIS PROHIBITION SUPERSEDES ALL
SPECIFICATION REQUIREMENTS BUT DOES NOT
ALLEVIATE ANY PRODUCT PERFORMANCE REQUIREMENTS.
THIS DOES NOT APPLY TO COMMERCIAL ITEMS, AS
DEFINED IN "FAR 11.001" OR TO PART-NUMBERED
ONLY ITEMS.
QPL ITEM; 415 FORM REQUIRED
SPECIFICATION
RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment RQ035: ITEM MAY CONTAIN BATTERIES
CRITICAL APPLICATION ITEM
TDP Rev A Gen 1 IAW BASIC SPEC NR MIL-PRF-83287/1D(2) REVISION NR D DTD 01/23/2019 PART PIECE NUMBER: M83287/01-26
TDP Rev A Gen 1 IAW REFERENCE SPEC NR MIL-PRF-83287G(4) REVISION NR G DTD 05/23/2018 PART PIECE NUMBER: M83287/01-26
LINE ITEM 0000000001 TYPE OF COVERAGE: DLA DIRECT, CONUS
SPE7M1-26-U-4522
SECTION B
PR: 1000237989 PRLI: 0001 CONT’D
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 1000237989 0001 EA 38.000
This is an estimated quantity and may not be purchased by the IDC.
NSN/MATERIAL:6625003750538
DELIVERY (IN DAYS):0092
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313, PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025. IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT

SPE7M1-26-U-4522 NSN/Part Number: 6625-00-375-0538 Quantity: 38 EA Purchase Request: 1000237989QTY: 38 Delivery: 92 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 334515
New
DIBBS
LEAD, TESTThe solicitation seeks two units of LEAD, TEST with NSN 6625-00-042-4430 under contract SPE7M1-26-T-221T, with a firm delivery deadline of 20 days after award. Full and open competition applies, and the procurement is governed by DLA packaging requirements and technical quality standards listed in the DLA Master List of Technical and Quality Requirements, with applicable revisions controlled by the solicitation issue date or amendment date if modified. Cybersecurity compliance mandates CMMC Level 2 certification through a certified third-party assessment organization, and all contractors must adhere to DFARS 252.225-7048 for the handling of export-controlled technical data subject to ITAR or EAR regulations, which prohibits unauthorized disclosure to foreign persons regardless of location. Access to such data is restricted to contractors with approved US/Canada Joint Certification Program status who have completed mandatory DLA training and questionnaire. The item is to be delivered to Keyport, WA, with a response deadline of August 3, 2026, and the NAICS code 334515 applies. Primary point of contact is Michael Reese at the provided email and phone number.
MARITIME SUPPLY CHAIN

POSTED

about 4 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334515
New
DIBBS
INDICATOR, FAULT LOCATIThe contract pertains to the procurement of a fault locating indicator identified as a commercial item under the NSN 6625-00-333-1048, conforming to military specifications MIL-PRF-83287/1D and MIL-PRF-83287G, both with part number M83287/01-22, and classified as a critical application item. The item may contain batteries and must comply with all applicable DLA Master List of Technical and Quality Requirements, which supersede any commercial standards such as ASTM D3951. Packaging must adhere to RP001 DLA Packaging Requirements for Procurement and MIL-STD-129 for marking and labeling, with hazardous materials requiring compliance with FED-STD-313 and TQ requirement IP025; non-hazardous items must be commercially packaged while still following DLA directives. The unit of issue is each (EA), with a quantity of 43 units at a unit price of $43.00, totaling $1,849.00, and the contract specifies a firm fixed-price structure with no quantity variance allowed. Delivery is required within 60 days FOB origin, with inspection and acceptance occurring at the destination. The contract is administered under DLA Direct, CONUS coverage and is issued under solicitation number SPE7M1-26-U-4546, with a response deadline of August 6, 2026. The NAICS code is 334515, and the contracting organization is the Department of Defense via the Maritime Supply Chain. All documentation, including technical and quality requirements referenced by R and I numbers, are governed by the DLA Master List in effect on the solicitation issue date, and the point of contact for inquiries is Bryan Fair, reachable at the provided email and phone number. The item is not subject to set-aside provisions and must be delivered in full compliance with DLA packaging, labeling, and unit of issue standards as specified.
MARITIME SUPPLY CHAIN

POSTED

about 4 hours ago

DEADLINE

in 15 days
View Details
NAICS: 334515
New
Federal
66--INDICATOR,FAULT LOCATI
DLA Land And Maritime

POSTED

about 9 hours ago

DEADLINE

in 15 days
View Details
NAICS: 334515
New
Federal
66--INDICATOR,FAULT LOCATI
DLA Land And Maritime

POSTED

about 9 hours ago

DEADLINE

in 15 days
View Details
NAICS: 334515
New
Federal
SIGNAL HOUND
Nswc Crane

POSTED

about 9 hours ago

DEADLINE

in 5 days
View Details
NAICS: 334515
New
Federal
Firm-Fixed Price, Commercial Item, Purchase Order to provide various meters for the Facility Maintenance Department at Rosebud IHS, Rosebud, South Dakota.
Great Plains Area Indian Health Svc

POSTED

about 9 hours ago

DEADLINE

in 21 days
View Details
NAICS: 334515
New
DIBBS
Precision Electronic Instrument Manufacturing – Ammeter ProductionThe contract requires the manufacture and delivery of six precision ammeters fully compliant with MIL-DTL-16034B military standards, encompassing end-to-end production from assembly to final testing and calibration to ensure accuracy and reliability under operational conditions. Each unit must be packaged and labeled according to military specifications, including appropriate documentation, protective materials, and marking requirements suitable for defense logistics and field deployment. The work is classified as a subcontract under NAICS code 334515, with the Department of Defense through MARITIME SUPPLY CHAIN as the overseeing agency, and all deliverables must be completed and submitted by the deadline of July 24, 2026. The performance location and point of contact are not specified, but the procurement is accessible via the DIBBS platform under solicitation reference SPE7M126U4018.
MARITIME SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 2 days
View Details
NAICS: 334515
New
DIBBS
METER, POWER FACTORThe contract pertains to the procurement of two units of a power factor meter identified by NSN 6625-01-580-7052 under solicitation SPE7M0-26-Q-1085, with a firm fixed price and no variance allowed in quantity. Delivery is required within 180 days after award, with shipment originating from the supplier and inspection and acceptance occurring at the destination. Packaging must comply fully with MIL-STD-2073-1E and DLA packaging requirements, including specific methods for preservation, wrapping, and unit containment, with marking adhering strictly to MIL-STD-129 and no special marking codes applied. Palletization must follow DLA’s standardized procedures, and the item must be shipped to the designated DLA distribution facility in New Cumberland, Pennsylvania. Technical and quality specifications referenced in the contract are drawn from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined based on the solicitation or award date. The government’s required delivery date is January 21, 2027, and the contract supports a federal supply initiative under the Department of Defense’s Maritime Supply Chain ESOc Buys.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

1 day ago

DEADLINE

in 13 days
View Details
NAICS: 334515
New
DIBBS
AMMETERThis contract, issued under solicitation number SPE7M1-26-U-4018 by the Defense Logistics Agency’s Maritime Supply Chain, is an indefinite delivery contract with a maximum value of $350,000.00 for the procurement of six ammeters identified by NSN 6625-01-085-6666. Delivery is required within 74 days after award, with FOB Origin terms and delivery to a destination within the continental United States, where final inspection and acceptance will occur. The item must conform to MIL-DTL-16034B technical specifications and the DLA Master List of Technical and Quality Requirements, with no use of Class I ozone-depleting substances permitted without explicit written approval from the Contracting Officer, a restriction that supersedes but does not override performance requirements. Mercury or mercury-containing compounds are strictly prohibited from intentional addition or direct contact with the item, except in specified functional applications such as batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or chemical reagents approved by NAVSEA; portable fluorescent lamps and instruments containing mercury must include a secondary containment barrier per NAVSEA 5100-003D. The item may contain batteries and is designated as a critical application item. Packaging and marking must adhere to MIL-STD-2073-1E and MIL-STD-129, with specific preservation methods, materials, and unit containers defined, including cling/dry preservation and EC unit containers. Labeling must comply with OSHA’s Hazard Communication Standard and applicable federal regulations, and hazardous material labels must be submitted for approval before award if not covered by exempt statutes. The contract requires full electronic invoicing and receiving report submission through Wide Area WorkFlow, and contractors must maintain compliance with a broad array of FAR and DFARS clauses, including safeguarding covered defense information, combating trafficking in persons, employment eligibility verification, sustainable product compliance, and prohibitions on hexavalent chromium and covered telecommunications equipment. Contractors are subject to cybersecurity requirements under DFARS 252.204-7012 and must hold a Unique Entity ID and CAGE code. The solicitation is open only to offerors who affirmatively represent their small business status if applicable, and the contract includes provisions for accelerated payments to small business subcontractors. All proposals must be submitted electronically through the DIBBS portal by the stated deadline, and no substitutions, alternatives, or deviations
MARITIME SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 2 days
View Details
NAICS: 334515
New
DIBBS
WATTMETERThe contract solicitation SPE7M1-26-T-150D for a WATTMETER under the Department of Defense’s Maritime Supply Chain involves the procurement of seven units identified by NSN 6625-01-156-7586, with delivery required 247 days after order placement to the DLA Distribution facility in New Cumberland, Pennsylvania. The item is subject to stringent packaging and labeling standards, mandated by MIL-STD-2073-1E for preservation and packaging, and MIL-STD-129 for marking and barcoding, which requires 2D Data Matrix codes for traceability. Preservation must adhere to Method 41 (Clean/Dry), with no preservation materials applied, and each unit must be individually wrapped. All markings must be legible and durable, with special attention to hazardous and radioactive material labeling per DFARS 252.223-7001 and MIL-STD-129, including detailed identification for radioactive content such as isotope name and activity level. The contract mandates FOB Origin terms and the exclusive use of Wide Area WorkFlow (WAWF) for all invoicing and receiving reports, with no alternative systems permitted. The solicitation incorporates a comprehensive array of FAR and DFARS clauses covering labor practices, cybersecurity, environmental compliance, and supply chain integrity. Key clauses include requirements for combating human trafficking, employment eligibility verification, sustainable product usage, prohibition of hexavalent chromium, and restrictions on the acquisition of Chinese military company products. Cybersecurity mandates are enforced through clauses such as 252.204-7012 for safeguarding defense information and cyber incident reporting, along with NIST SP 800-171 assessment requirements. Transportation by sea must use U.S.-flag vessels under DFARS 252.247-7023, with documentation required to verify compliance. Contractors must also comply with restrictions on toxic material storage and disposal, whistleblower rights disclosures, and limitations on compensation for former DoD officials. Offerors are required to provide their Unique Entity ID, declare small business status and socioeconomic certifications, and complete representations regarding covered telecommunications equipment under 252.204-7016. Inspection and acceptance occur at destination, with zero non-conformances expected unless otherwise specified, and all shipments must meet MIL-STD-1916 sampling standards. Failure to comply with any of these specifications
MARITIME SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 2 days
View Details
NAICS: 334515
New
DIBBS
PAPER, LENSThe contract is for PAPER, LENS with dimensions of 4 inches by 6 inches, classified as Type 1, Class 5, suitable for wet use. The unit of issue is a package containing fifty units per page, and the NSN is 6640-01-459-4239 with a procurement quantity of one package. The purchase request number is 7017567630 and delivery must be completed within 20 days after order. Technical and quality requirements referenced by R or I numbers are incorporated from the DLA Master List of Technical and Quality Requirements, and the applicable revision is determined by the solicitation issuance date for simplified acquisitions or the RFP issue date for large acquisitions unless an amendment supersedes it. Packaging must comply with DLA requirements, and non-accepted supplies must have government identification removed prior to return. The solicitation number is SPE2DS-26-T-258K, posted on July 21, 2026, with responses due by July 27, 2026. The contract is managed by the Department of Defense under the Medical Supply Chain MD Surg FSF, with performance to be delivered to FPO, ZIP 96678. Primary point of contact is Olusola Emmanuel, reachable via email and phone provided. The NAICS code assigned is 334515, and the acquisition is designated as federal.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

1 day ago

DEADLINE

in 5 days
View Details
NAICS: 334515
New
DIBBS
AMMETERThe contract is for the procurement of four ammeters under solicitation SPE7M1-26-T-184M, with delivery required 150 days after award by December 14, 2026, to the Defense Logistics Agency Land and Maritime facility in Tracy, California. The item is identified by NSN 6625010856665 and must comply with stringent technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, including MIL-DTL-16034B for specifications and MIL-STD-2073-1E for packaging. Packaging must adhere to strict preservation and unit containment protocols, including clean and dry preservation, jute cloth cushioning, drum intermediate containers, and labeling in accordance with MIL-STD-129, with no special marking required. The ammeters may contain batteries and are classified as a critical application item, necessitating compliance with mercury restrictions: no intentional addition of mercury or its compounds unless used in functional components like batteries, fluorescent lamps, or instruments specified by NAVSEA; in such cases, portable devices must include shock-proof construction and a secondary containment barrier per NAVSEA 5100-003D. The use of Class I ozone-depleting substances is strictly prohibited in all manufacturing and processing steps unless written approval is obtained from the Contracting Officer, with exceptions only for commercial items as defined by FAR 11.001 or part-numbered-only items. Sampling for quality assurance must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances expected unless otherwise specified, and critical, major, and minor attributes must be verified at levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Inspection and acceptance occur at the destination, with the government retaining authority over validation. The contract mandates adherence to hazardous material handling, including proper labeling under 29 CFR 1910.1200 and compliance with DFARS requirements for transportation by sea, which requires use of U.S.-flag vessels unless a waiver is secured with 45 days’ notice and supporting documentation. Cybersecurity obligations under DFARS 252.204-7012 require implementation of NIST SP 800-171 controls to safeguard covered defense information, with mandatory
MARITIME SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 2 days
View Details

More opportunities from Department Of Defense → MARITIME SUPPLY CHAIN

Same awarding agency

NAICS: 334419
New
DIBBS
SOCKET, PLUG-IN ELECTROThis contract pertains to the procurement of 71 plug-in electronic sockets with the NSN 5935-00-148-3669 under solicitation SPE7M1-26-U-4524, issued as a total small business set-aside with a NAICS code of 334419. Delivery is required within 127 days of award, and all supplies must comply with the DLA Master List of Technical and Quality Requirements referenced by R and I numbers, which govern packaging, inspection, and acceptance standards. Inspection and acceptance are to occur at the origin, with mandatory bare item marking and strict protocols for the removal of government identification from non-accepted items. The contract prohibits the intentional inclusion of mercury or mercury-containing compounds in the hardware, except for functional uses in batteries, fluorescent lamps, sensors, weapon systems, or specific chemical reagents authorized by NAVSEA; portable devices containing mercury must feature shock-proof construction and a secondary containment barrier per NAVSEA 5100-003D. Sampling must follow MIL-STD-1916 or ASQ H1331 with zero nonconformances required unless otherwise directed, with verification levels assigned based on attribute criticality. The technical data associated with this item is subject to export controls under ITAR or EAR, restricting disclosure to foreign persons, and is only accessible to contractors with approved JCP certification, completed DOD export control training, and explicit DLA authorization. Additionally, the contractor must be certified at CMMC Level 2 by an accredited third-party assessment organization and adhere to all applicable cybersecurity and defense information protection standards.
Other Electronic Component Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 15 days
View Details
NAICS: 335312
New
DIBBS
SYNCHRO, TRANSMITTERThe contract pertains to the procurement of a Synchro Transmitter, identified by part numbers 867-015-001 from Parker-Hannifin Corporation and HGC-11-RE-6/F798 from Moog Inc., with a National Stock Number of 5990-01-384-9747. A total of 72 units are required under purchase request 1000237780, with a unit price of $72.00 and a total price of $5,184.00. Delivery is mandated within 126 days on a FOB Origin basis, with no tolerance for variance in quantity. Inspection and acceptance occur at the destination point, in compliance with DLA’s direct procurement procedures for CONUS. The item is classified as a Critical Application Item and must adhere to the full suite of technical and quality requirements listed in the DLA Master List, which overrides any other standards such as ASTM D3951. Packaging and labeling must conform to MIL-STD-129 and palletization must follow RP001: DLA Packaging Requirements for Procurement. Additionally, the vendor must maintain Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment compliance and remove government identification from non-accepted supplies. The solicitation number is SPE7M1-26-U-4634, with a response deadline of August 6, 2026, issued under the NAICS code 335312 by the Department of Defense’s Maritime Supply Chain office.
Motor and Generator Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 15 days
View Details
NAICS: 333914
New
DIBBS
PUMP, RECIPROCATINGThe contract is for the procurement of two reciprocating pumps with NSN 4320-01-304-1371 and part number RPA308112C, issued under solicitation SPE7M1-26-T-221Q by the Department of Defense’s Maritime Supply Chain. Delivery is required within 20 days of contract award, with FOB destination terms and zero variance allowed in quantity. Inspection and acceptance occur at the destination, and all supplies must be packaged in strict compliance with ASTM D3951 and MIL-STD-129, with packaging and labeling controlled by DLA’s Master List of Technical and Quality Requirements, which supersede any conflicting standards. The Unit of Issue is each, and palletization must adhere to DLA’s RP001 packaging requirements. The items are to be delivered to USNS YUKON T-AO 202 at FPO AP 96686, with transportation details governed by DLAD PROC NOTE C19 and C20. The original required delivery date is July 20, 2026, and the contract includes specific government-only codes for logistics tracking and distribution. All technical and quality specifications referenced via R or I numbers are sourced from the DLA Master List, whose applicable revision is determined by the solicitation issue date or any amendment date.
Measuring, Dispensing, and Other Pumping Equipment Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 12 days
View Details
NAICS: 335314
New
DIBBS
RELAY, ELECTROMAGNETICThis contract specifies the procurement of an electromagnetic relay under solicitation SPE7M1-26-U-4567, with the NSN 5945-00-818-8904 and part number MS25267-A1, requiring 30 units to be delivered FOB origin within 247 days. The item must comply with technical specifications MIL-PRF-6106R(1) SUP 1A and MS25267J, and all applicable requirements from the DLA Master List of Technical and Quality Requirements referenced by R and I numbers. Configuration change management, deviation requests, and qualified manufacturers lists are strictly controlled, and mercury or mercury-containing compounds are prohibited unless explicitly exempted for functional uses in batteries, instruments, or weapon systems, with additional containment requirements for portable devices. The use of Class I ozone-depleting substances is forbidden without written contracting officer approval, and this prohibition overrides any conflicting specification language. The contractor must ensure compliance with DLA packaging standards per MIL-STD-2073-1E, including prescribed methods for preservation, wrapping, and unit container marking, and all packaging must adhere to MIL-STD-129 with the special marking code ZZ. Each individual unit must be labeled according to IPC/JEDEC J-STD-609 to identify lead content, with markings placed as specified in the standard. Delivery is subject to zero variance in quantity, inspection and acceptance occur at the destination, and the item is classified as a critical application. Full and open competition is required, and the contract applies to government-furnished hardware with no commercial item exceptions. The point of contact is Bryan Fair at DLA, and all information must be interpreted within the context of the DLA acquisition framework.
Relay and Industrial Control Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 15 days
View Details
NAICS: 334418
New
DIBBS
SOLENOID, ELECTRICALThe contract pertains to the procurement of a solenoid, electrical component with NSN 5945-00-463-9280 and part number 965830, sourced from approved vendors including RP001 compliant suppliers such as ROCKER SOLENOID CO, G.W. LISK CO, INC, and PARKER HANNIFIN CORPORATION. The item is classified as a critical application item under a total small business set-aside, with a requirement for 47 units delivered within 198 days FOB origin, with no tolerance for quantity variance. The contract mandates strict adherence to DLA packaging standards per MIL-STD-2073-1E, including specific preservation methods, materials, and unit packaging code U, with all marking requirements following MIL-STD-129 and the special code ZZ for lead finish identification as defined by IPC/JEDEC J-STD-609. Each individual unit must be labeled in accordance with this standard to denote lead content and other attributes, with placement strictly regulated. Inspection and acceptance occur at the destination point, and the contract is issued under DLA direct, CONUS coverage using the DoD unit of issue system. The solenoid is subject to the overarching technical and quality requirements outlined in the DLA Master List, with compliance governed by the revision in effect at the solicitation or award date depending on acquisition size. The solicitation number is SPE7M1-26-U-4525, with a response deadline of August 6, 2026, and the primary point of contact is Bryan Fair of the Department of Defense’s Maritime Supply Chain.
Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 15 days
View Details
NAICS: 333996
New
DIBBS
IMPELLERThe contract specifies the procurement of two impellers with a diameter of 7.187 inches, identified by NSN 4320012660717 and purchase request 7017574014, under solicitation SPE7M1-26-T-221U. Delivery is required within 20 days of contract award, with shipment FOB origin and inspection and acceptance occurring at the destination. The impellers must conform to all technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, which supersede ASTM D3951, and all packaging must comply with MIL-STD-129 for marking and labeling. Unit packaging must adhere to the specified Quantity per Unit Pack (QUP) of 001, and palletization must follow DLA Packaging Requirements. The impellers are to be shipped via traceable freight to the designated Virginia Beach shipping address, and parcel post is explicitly prohibited. The contract lists two qualified suppliers—All-Safe Inc and Pentair Federal Pump, LLC—as authorized sources for the part number 443-1768-208, and the unit price is set at $2.00 per unit for a total price of $4.00. The government’s required delivery date is July 20, 2026, with the solicitation issued on July 22, 2026, and responses due by August 3, 2026. The contracting office is the Maritime Supply Chain under the Department of Defense, with Michael Reese as the primary point of contact.
Fluid Power Pump and Motor Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334419
New
DIBBS
FILTER, RADIO FREQUENCYThe contract pertains to the procurement of 22 units of a Radio Frequency Interference Filter with NSN 5915-01-260-4112 under solicitation SPE7M1-26-U-4586, issued by the Department of Defense's Maritime Supply Chain through the Defense Logistics Agency. Delivery is required within 106 days after award, with responses due by August 6, 2026. The item is subject to stringent cybersecurity requirements, including compliance with CMMC Level 2 as a Certified Third-Party Assessment Organization, and adherence to DLA’s technical and quality specifications referenced in their Master List. Technical data associated with the filter is classified as export-controlled under either ITAR or EAR, restricting dissemination to foreign persons regardless of location and mandating prior authorization from the Department of State or Commerce. Only contractors with approved US/Canada Joint Certification Program status, completed DOD export training, and DLA authorization may access this data. Additionally, the contractor must comply with DLA packaging standards, remove government identification from non-accepted supplies, and handle Covered Defense Information in accordance with applicable regulations. The procurement is managed by Point of Contact Bryan Fair, with all details accessible via the DIBBS website.
Other Electronic Component Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 15 days
View Details
NAICS: 334413
New
DIBBS
HEATER, THERMAL RELEASEThe contract pertains to the procurement of 55 units of a Thermal Release Heater identified by NSN 5999-00-504-9889, with a delivery schedule of 350 days from award. All supplies must comply with DLA packaging requirements and incorporate technical and quality specifications referenced by R or I numbers from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date or award date depending on the acquisition size. Configuration control requires formal engineering change proposals and procedures for requesting deviations or waivers. Items must be physically marked according to established identification standards, and any non-accepted supplies must have government identification removed prior to return. Sampling and inspection must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise specified, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. No intentional addition of mercury or mercury-containing compounds is permitted in any supplied hardware or materials, except for functional uses in batteries, fluorescent lamps, required instruments, sensors, controls, weapon systems, or NAVSEA-specified chemical reagents; portable fluorescent lamps and instruments containing mercury must be shock-proof and include a secondary containment boundary per NAVSEA 5100-003D. No existing data package is available, and the alternate offeror must submit a complete data package including technical details for both the approved and alternate parts. The solicitation was issued under SPE7M1-26-U-4564 with a response deadline of August 6, 2026, and is managed by the Department of Defense’s Maritime Supply Chain through primary point of contact Bryan Fair.
Semiconductor and Related Device Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 15 days
View Details
NAICS: 335999
New
DIBBS
POWER SUPPLYThe contract is for the procurement of one power supply with NSN/Part Number 6120-01-592-7992, issued under solicitation SPE7M1-26-T-222A by the Department of Defense through the Maritime Supply Chain. The offeror must comply with all DLA packaging requirements and technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date or award date depending on the acquisition size. The item must be delivered within 20 days after delivery order issuance to Fort Bliss, Texas, with a response deadline of August 3, 2026. The offeror is also required to submit a complete data package including specifications for both the approved and alternate parts. The primary point of contact for inquiries is Michael Reese, reachable via email or phone, and the solicitation is unreserved with no set-aside designations, classified under NAICS code 335999 for other electrical equipment and component manufacturing.
All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 12 days
View Details
NAICS: 335311
New
DIBBS
COIL, ELECTRICALThe contract pertains to the procurement of an electrical coil with NSN 5950-01-106-6783 and part number 213322-1178, supplied by Marotta Controls Inc, under solicitation SPE7M1-26-U-4616. Six units are required at a unit price of $6.00, totaling $36.00, with delivery mandated within 164 days FOB origin and no variance allowed in quantity. Inspection and acceptance occur at destination, and packaging must comply with MIL-STD-2073-1E and MIL-STD-129, with special handling instructions indicating the item is delicate, featuring fragile terminals that must remain protected. The packaging code is U, utilizing preservative method 41, and requires marking with the special code 06 for delicate instrument and arrow up. Mercury and mercury-containing compounds are strictly prohibited unless part of functional components like batteries, fluorescent lights, or specific instruments as authorized by NAVSEA, and any portable mercury-containing devices must include a secondary containment barrier per NAVSEA 5100-003D. All packaging, marking, and shipping must adhere to DLA’s RP001 and IP025 requirements for hazardous materials. The contract falls under DLA Direct, CONUS coverage and uses the DoD-authorized unit of issue. Compliance with the DLA Master List of Technical and Quality Requirements is mandatory, with the applicable revision controlled by the acquisition type and relevant dates. Purchasing is estimated and subject to IDC confirmation.
Power, Distribution, and Specialty Transformer Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 15 days
View Details
NAICS: 334413
New
DIBBS
DISPLAY, OPTOELECTRONICThe contract pertains to the procurement of 17 units of a display, optoelectronic item identified by NSN 5980-01-247-1862, with a delivery requirement of 120 days after order. The solicitation, numbered SPE7M1-26-U-4627, is issued under a Women-Owned Small Business Set-Aside and falls under NAICS code 334413. All supplied items must strictly conform to the source-controlled drawing referenced in the contract, and only the sources listed on that drawing are currently approved for this procurement, though additional qualified sources not yet reflected on the drawing may be considered in the future. Offerors seeking to qualify their products for future acquisitions must contact the cognizant design activity specified on the drawing. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date or award date, depending on the acquisition size. Sampling for inspection must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances permitted unless otherwise stated; attributes are assigned verification levels of VII, IV, and II for critical, major, and minor characteristics respectively, with unspecified attributes treated as major. Packaging must comply with DLA packaging requirements, and government identification must be removed from any non-accepted supplies. The point of contact for this solicitation is Bryan Fair at the Department of Defense’s Maritime Supply Chain.
Semiconductor and Related Device Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 15 days
View Details