Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Industrial Asbestos Abatement (Motor Components)

Active

Federal

Response Deadline11/23/2026, 07:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract for Industrial Asbestos Abatement focuses on the testing and removal of asbestos-containing materials from motor leads and windings for prime contractors working on US Army Engineer District Walla Walla projects. The scope of work involves ensuring motor components are safe for rewind operations by utilizing HEPA vacuum systems and containment barriers in strict accordance with EPA and OSHA standards to deliver certified asbestos-free components. The project is categorized under NAICS code 238210 and will be performed in Pomeroy, Washington. Interested parties should note the response deadline of November 23, 2026, for this Department of Defense requirement.

General Info

Asbestos abatement for US Army motor components in Pomeroy, WA; deadline November 23, 2026.

Agency

Department Of Defense → US Army Engineer District Walla Wal

NAICS

238210 - Electrical Contractors and Other Wiring Installation Contractors

Place of Performance

Pomeroy, WA, 99347, USA

Set-Aside

NONE

Documents

This scope was carved out of W912EF27QA006.

The full solicitation package (9 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

LLA Fish Pump - Motor Rewind

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 22

subcontract

Response DeadlineNov 23

Submission deadline

Response Deadline

11/23/2026, 07:00:00 PM UTCin 30 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → US Army Engineer District Walla Wal

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → US Army Engineer District Walla Wal

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs testing and abatement of asbestos for prime contractors on USACE Walla Walla District projects. Tests motor leads and windings for asbestos-containing materials (ACM) and performs abatement to allow safe rewind operations. Utilizes HEPA vacuum systems and containment barriers in compliance with EPA and OSHA standards. Delivers certified asbestos-free motor components.

Similar Contracts

Same NAICS industry code

Jim Walters and Port O'Call South Lift Station Improvements - Runaway Bay, TX (Electrical, Fencing, Site Grading)

Solicitation # jim-walters-port-ocall-south-lift-station-improvements-runaway-bay-tx-electrical-fencing-site

Puris Services, LLC is soliciting quotes for the Jim Walters and Port O'Call South Lift Station Improvements project located in Runaway Bay, Texas. This opportunity is specifically set aside for small, minority, women-owned, and labor surplus certified firms. The required scopes of work include electrical services, fencing, and site grading and materials, falling under NAICS codes 238210, 238990, and 238910. Interested parties must submit their quotes by October 30, 2026, with the final bid due date set for November 3, 2026. Ashden Middlebrooks serves as the primary point of contact for all inquiries, plans, and specifications, and can be reached via email at ashden.middlebrooks@puriscorp.com or by phone at 470-503-5624.

Puris Services, LLC

POSTED

about 14 hours ago

DEADLINE

Transformer Oil Testing Services

Solicitation # RFP-VC-26-010

The Inland Empire Utilities Agency is soliciting proposals under RFP-VC-26-010 for professional transformer oil testing services to enhance the reliability, safety, and maintainability of its transformers. The scope of work is divided into three primary areas: conducting visual and infrared thermographic inspections to identify thermal anomalies, installing standardized external oil sampling devices to improve safety and access, and performing comprehensive oil testing analysis. Additionally, the selected contractor will evaluate nitrogen blanket systems to ensure positive pressure is maintained, provide on-site training for agency staff, and develop standard operating procedures. All work must adhere to strict industry standards, including ASNT Level 1 certification for thermography, NETA MTS, IEEE, NFPA 70E, and ASTM D923 and D924. The agency intends to make a single award to the most capable offeror based on their project experience with utilities or industrial facilities, proposed staffing and methodology, personnel availability, and cost-effectiveness. Proposals must be submitted electronically via PlanetBids by December 23, 2026, and must include a detailed company profile, project approach, and required certifications such as a Non-Collusion Statement and Workers Compensation Certificate. The contract will feature fixed pricing for an initial term with potential one-year extensions. Awardees must comply with California Labor Code prevailing wage requirements and provide evidence of cybersecurity commitments through SOC 2 or CAIQ documentation.

Inland Empire Utilities Agency

POSTED

about 14 hours ago

DEADLINE

in about 2 months

Purified Water Replenishment San Jacinto Valley Advanced Water Purification Facility

Solicitation # purified-water-replenishment-san-jacinto-valley-advanced-water-purification-facility-2

Axia Electric LLC is soliciting bids from SBE/DBE certified firms for the Purified Water Replenishment San Jacinto Valley Advanced Water Purification Facility Project for the Eastern Municipal Water District in California. The scope of work is divided between the San Jacinto Valley Advanced Water Purification Facility and Brine Ponds, specifically requesting subcontractors for low voltage systems, fiber optics, and electrical materials and supplies. Bids must be submitted by 2:00 PM on November 18th, with a final deadline of November 19th, 2026. Quotes should be sent to Ryan Falk, and any requests for plans or specifications should be directed to Amy Roller. Qualified bidders must be registered to perform public work pursuant to Section 1725.5 of the Labor Code and must meet strict insurance requirements, including 5 million dollars in excess liability and 1 million dollars each for auto liability, workers compensation, and per-occurrence general liability. Submission of a bid constitutes acceptance of Axia’s Standard Long Form Subcontract or Purchase Order, the AGC Master Labor Agreements, and all prime contract terms and conditions. While the solicitation targets SBE/DBE firms, non-certified bidders are encouraged to provide lower-tier SBE/DBE participation details for evaluation.

POSTED

about 14 hours ago

DEADLINE

2026-Nalo-Back-Up Generator Replacement

Solicitation # 2026-nalo-back-generator-replacement

Management and Training Corporation is seeking bids from qualified electrical contractors for a subcontracting opportunity to replace the back-up generator at the Hawaii Job Corps Center in Waimanalo. This project falls under NAICS code 238210 and is specifically designated for small businesses, including certified veteran-owned, service-disabled veteran-owned, women-owned, and HUBZone small businesses. Interested parties must submit their responses by November 3, 2026. The primary point of contact for this solicitation is Karllene Allen, who can be reached via email or phone for further coordination regarding the performance of work in Hawaii.

2026-Nalo-Back-Up Generator Replacement

POSTED

about 14 hours ago

DEADLINE

Centennial JCC Emergency Lighting Replacement, Upgrade, Testing & Maintenance Services

Solicitation # centennial-jcc-emergency-lighting-replacement-upgrade-testing-maintenance-services

Management and Training Corporation is soliciting bids for a fixed-price, single lump sum contract to provide emergency lighting replacement, upgrade, testing, and maintenance services at the Centennial Job Corps Center in Nampa, Idaho. The project involves inspecting, testing, repairing, and certifying emergency lighting systems to ensure compliance with NFPA 101 (2024 Edition), NFPA 70, and OSHA standards. Key tasks include inventorying all fixtures, performing functional power-cut testing, replacing failed ballasts with LED-compatible versions in specific areas such as the cafeteria, dorms, and education buildings, and applying durable tracking labels to all tested fixtures. The estimated contract value ranges between $25,000 and $100,000. Bids are due by December 1, 2026, and will be awarded based on overall best value. Mandatory requirements for submission include a physical site visit, a detailed cost breakout, and a bid bond guarantee of 20% for bids equal to or exceeding $25,000. Awarded contractors must provide performance and payment bonds from a surety with at least an A- rating. This opportunity is set aside for various small business categories, including VOSB, SDVOSB, WOSB, and HUBZone. Compliance with Federal Contractor Minimum Wage requirements, Davis-Bacon Act wage determinations for Idaho, and FAR regulations regarding small business utilization and whistleblower rights is required. Final acceptance is contingent upon a joint substantial completion inspection and the resolution of all punch list items.

Management & Training Corporation/Centennial Job Corps Center

POSTED

about 14 hours ago

DEADLINE

in about 1 month

ASO-1489-00 Installation of Distance Measuring Equipment (DME) on runway 15 at the Charleston International Airport in Charlston, SC

Solicitation # aso-1489-00-installation-distance-measuring-equipment-dme-runway-15-charleston-international-airport

This solicitation, identified as ASO-1489-00, involves the construction and installation of Distance Measuring Equipment (DME) to be collocated with the Runway 15 Localizer at Charleston International Airport in South Carolina. Managed by Parsons, the project falls under NAICS code 238210 and is specifically designated as a set-aside for various small business types, including Veteran Owned, Service-Disabled Veteran Owned, Women-Owned, and HUBZone Small Businesses. Interested parties must submit their responses by the deadline of November 27, 2026. The primary point of contact for this opportunity is Quentin Wack. This procurement aims to enhance airport navigation infrastructure through the strategic installation of DME technology on the specified runway.

POSTED

about 14 hours ago

DEADLINE

in about 1 month

AMC-0235 TBD VOR Public Announcement

Solicitation # amc-0235-tbd-vor-public-announcement

This solicitation, issued by PTSI Managed Services Inc. (Parsons), involves a comprehensive construction project located in Louisiana. The scope of work encompasses a variety of facility improvements, including electrical work, grounding system repairs, roofing installation, plumbing replacements, grading, painting, and door repairs. The estimated magnitude of construction for these services is valued between 500,000 and 1,000,000 dollars. The opportunity is designated as an SBA set-aside, specifically open to Small Businesses, including Small Disadvantaged, Women-Owned, HUBZone, and Veteran-Owned Small Businesses. Interested parties must submit their responses by November 16, 2026. The project falls under NAICS code 238210, and primary inquiries should be directed to Kurtis Kinard.

PTSI Managed Services Inc. (Parsons)

POSTED

about 14 hours ago

DEADLINE

ASO-0728-00 DME Shelter Installation in Shelby, NC

Solicitation # aso-0728-00-dme-shelter-installation-shelby-nc

Parsons Corporation is soliciting bids for the installation of a DME shelter in Shelby, North Carolina. The scope of work includes the installation of a shelter furnished by others, along with a DME antenna, associated foundations, junction box, meter rack, underground conduit, grounding, and conductors. This project falls under NAICS code 238210. The solicitation is open to various small business classifications, including SBA certified Veteran Owned, Service-Disabled Veteran Owned, Women-Owned, and HUBZone Small Businesses. Interested parties must submit their responses by the deadline of December 30, 2026. Primary coordination for this effort is managed by Quentin Wack.

Parsons Corporation

POSTED

about 14 hours ago

DEADLINE

Electrical Systems & Lighting MaintenanceThis subcontract for Electrical Systems and Lighting Maintenance involves providing essential maintenance and repair services for electrical plants and lighting systems on Transbay Joint Powers Authority facility projects. The scope of work includes maintaining electrical distribution, replacing lamps, cleaning light fixtures, and repairing electrical systems specifically for trash and recycling compactors to ensure all systems remain fully functional. Qualified bidders must provide a Licensed Electrician and adhere strictly to DIR Prevailing Wage compliance. The solicitation was posted on October 23, 2026, with a response deadline of December 4, 2026. This opportunity falls under NAICS code 238210 and is managed through the California Procurement agency.

POSTED

DEADLINE

in about 1 month

Kitchen Electrical SubcontractorThis subcontract for Muscogee County Schools involves providing specialized electrical installation services for school nutrition projects. The selected subcontractor will be responsible for installing electrical power supplies and connections for prime contractors, specifically delivering energized lines within four feet of equipment. The scope of work includes providing wiring for both 208-volt and 480-volt options. To qualify for this project, the contractor must be a Licensed Master Electrician and ensure all work complies with NEMA standards. The solicitation was posted on October 23, 2026, with a response deadline of November 17, 2026. This opportunity falls under NAICS code 238210 for electrical contracting.

Muscogee County Schools

POSTED

DEADLINE

Electrical Installation ContractorThis subcontract opportunity is for an Electrical Installation Contractor to support prime contractors on Connecticut Department of Energy and Environmental Protection projects. The scope of work involves the removal of existing equipment and the installation of new EV charging stations across four separate locations. Responsibilities include mounting the chargers to surfaces and connecting all necessary supporting utilities to ensure the stations are fully operational. To qualify for this project, the contractor must employ a Connecticut Licensed Master Electrician and ensure all work strictly adheres to the National Electrical Code. Interested parties should note that the response deadline is November 13, 2026, and the project falls under NAICS code 238210.

DAS Procurement

POSTED

DEADLINE

Electric Vehicle Charging Station Upgrades

Solicitation # DEEP102326CM

The Connecticut Department of Energy and Environmental Protection (DEEP) is soliciting bids under solicitation number DEEP102326CM for a consultant to provide review and installation support for upgrading electric vehicle charging stations at four statewide locations. The primary objective is to replace existing units with similar stations that integrate Amp Up wireless software to enable electronic payment processing for electricity used during transactions. The scope of work includes conducting site assessments to document existing equipment and utilities, developing schematic plans for supporting utilities, providing cost and construction timelines, and coordinating system start-up and owner training to ensure full functionality of the public payment capabilities. Bids must be submitted electronically to William Coleman by 2:00pm on November 13, 2026, and must remain valid for 90 days following the closing date. Evaluation by a DEEP representative panel will be based on the contractor's project approach, relevant experience and references, and a detailed breakdown of time and cost. Selected candidates may be required to participate in interviews or presentations. Upon selection, the contractor will negotiate a Purchase Order and Project Agreement to finalize financial terms and responsibilities.

DAS Procurement

POSTED

DEADLINE

More opportunities from Department Of Defense → US Army Engineer District Walla Wal

Same awarding agency

Dworshak Skeleton Bay Draft Tube Bulkhead Rehabilitation

Solicitation # W912EF27QA0020001

Metal Coating, Engraving (except Jewelry and Silverware), and Allied Services to Manufacturers

POSTED

DEADLINE

Heavy Equipment Transport (Motors)This subcontract opportunity is for the provision of heavy haul transportation services for large industrial motors supporting prime contractors on US Army Engineer District Walla Walla District projects. The scope of work involves developing comprehensive transportation plans and executing the loading, securing, and hauling of oversized motors between the Lower Granite Dam and designated rewind shops. The selected contractor must utilize heavy-duty flatbeds and specialized rigging equipment to ensure the safe delivery of these components to and from the facility. The project is categorized under NAICS code 484220 and is managed by the Department of Defense. Performance of the contract will take place in Pomeroy, Washington. Interested parties should note that the response deadline for this opportunity is November 23, 2026.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

Industrial Motor Coating and PaintingThis subcontract opportunity involves providing industrial coating and painting services for refurbished motors supporting prime contractors on US Army Engineer District Walla Walla projects. The scope of work includes performing surface preparation on motor housings, applying industrial-grade paint, and ensuring the safe removal of RCRA metal-based paints in strict compliance with Resource Conservation and Recovery Act standards. The project will be performed in Pomeroy, Washington, under NAICS code 238210. Interested parties must submit their responses by November 23, 2026, to support the Department of Defense in delivering fully painted and coated motor housings.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

DEADLINE

Heavy Industrial Motor Rewind and RefurbishmentThis subcontract involves the heavy industrial rewind and refurbishment of three 4160V polyphase AC squirrel cage induction motors supporting prime contractors for the US Army Engineer District Walla Walla. The scope of work includes stator burnout, core loss testing, and the implementation of Class F insulation systems. Technical requirements specify the installation of eight RTDs per phase, as well as comprehensive rotor balancing and load run temperature rise tests to ensure operational integrity. The project is managed under the Department of Defense with performance taking place in Pomeroy, Washington. The contractor is responsible for the delivery of three fully refurbished and tested motors. Interested parties should note the response deadline of November 23, 2026, for this specialized electrical refurbishment effort.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

DEADLINE

LLA Fish Pump - Motor Rewind

Solicitation # W912EF27QA006

Solicitation W912EF27QA006 is a combined synopsis and request for quotation issued by the US Army Engineer District Walla Walla for motor rewind and asbestos abatement services at the Lower Granite Dam in Pomeroy, Washington. The scope of work involves the rewinding, refurbishing, and addition of eight resistance temperature detectors to three polyphase AC squirrel cage induction motors used for fish pumps. This includes one Hitachi dual winding motor and two Ideal Electric single-winding motors. To ensure operational continuity, the project will be executed by rewinding one motor per year, with a total performance period extending through December 2029. The contract is a firm-fixed-price acquisition and is not set aside for small business concerns, although evaluation preferences are provided for HUBZone small businesses. Key technical requirements include the use of a minimum class F motor insulation system and strict adherence to core loss and hot spot specifications. Deliverables include the refurbished motors, final operation and maintenance manuals, and on-site commissioning support. The government has established a seven-business-day window for the acceptance or rejection of services following delivery. Liquidated damages are specified for delays, with daily rates increasing annually from FY28 through FY30. Offerors must comply with various federal regulations, including the Buy American and Balance of Payments Program, E-Verify personnel screening, and DFARS cybersecurity reporting standards.

Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

DEADLINE

Notice of Intent to Award Single Source - Flow 3D Software Maintenance

Solicitation # W912EF27QA003

The U.S. Army Corps of Engineers, Walla Walla District, has issued a special notice regarding its intent to solicit and negotiate a single source contract specifically with Flow Science. This procurement, identified by solicitation number W912EF27QA003, is dedicated to the maintenance of Flow 3D Software. The action is categorized under NAICS code 513210 and will be performed in Washington. The notice was posted on October 19, 2026, with a response deadline set for October 26, 2026. There is no set-aside designated for this requirement.

Software Publishers

POSTED

DEADLINE

in about 18 hours

Industrial Paint and Abrasive Media SupplyThis subcontract opportunity, issued by the US Army Engineer District Walla Walla under the Department of Defense, seeks a provider for industrial paints, coatings, and abrasive blasting media. The selected vendor will supply materials to prime contractors for rehabilitation projects, ensuring that all coatings adhere to SAE AMS-STD-595A standards and that abrasive media is angular and non-steel shot. To maintain quality control, the contractor must provide all necessary material certifications and manufacturer batch numbers upon delivery to the project site. This procurement is designated as a total set-aside for small businesses under NAICS code 423510. Interested parties must submit their responses by October 30, 2026. The contract focuses on the reliable delivery of specified quantities of industrial materials to support critical infrastructure rehabilitation efforts within the Walla Walla District.

Metal Service Centers and Other Metal Merchant Wholesalers

POSTED

DEADLINE

Bulkhead Transportation and LogisticsThe Bulkhead Transportation and Logistics subcontract, issued by the US Army Engineer District Walla Walla, requires the provision of heavy haul transportation services for prime contractors. The scope of work involves the transport of 12 industrial bulkheads from Dworshak Dam to a designated rehabilitation facility and their subsequent return by specified deadlines. To ensure the safe delivery of these oversize loads, the contractor must utilize heavy-duty flatbed trucks or specialized trailers and provide a detailed transportation plan in full compliance with DOT regulations. This opportunity is designated as a total Small Business Set Aside under NAICS code 484220. Interested parties must submit their responses by October 30, 2026. The primary objective of the contract is the secure and timely logistics management of critical infrastructure components for the Department of Defense.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

Bulkhead Structural Weld RepairsThis small business set-aside subcontract involves performing structural weld repairs and inspections for prime contractors on US Army Engineer District Walla Walla District projects. The scope of work focuses on executing weld repairs on seal keeper bars and draft tube bulkheads to meet structural steel standards, utilizing compatible consumables and welding machinery to deliver certified, structurally sound results. Qualified contractors must provide welders certified to AWS D1.1/D1.1M Structural Welding Code - Steel as well as Certified Weld Inspectors. This opportunity falls under NAICS code 238120 and is managed by the Department of Defense, with a response deadline set for October 30, 2026.

Structural Steel and Precast Concrete Contractors

POSTED

DEADLINE

Bulkhead Abrasive Blasting and Industrial Coating ApplicationThis small business set-aside subcontract involves the removal of existing coatings and the application of new industrial coating systems for twelve bulkheads on US Army Engineer District Walla Walla projects. The scope of work requires dry-blast cleaning surfaces to white metal according to SSPC SP 5 / NACE No. 1 standards and performing sweep blasting per SSPC SP7. All spray coatings must adhere to SAE AMS-STD-595A specifications. To qualify, the contractor must hold SSPC QP 3 or AISC Complex Coatings certification and provide an SSPC-PCI or NACE CIP Level 2 inspector. This project falls under NAICS code 327910 and is managed through the Department of Defense.

Abrasive Product Manufacturing

POSTED

DEADLINE

Dworshak Skeleton Bay Draft Tube Bulkhead Rehabilitation

Solicitation # W912EF27QA002

The US Army Corps of Engineers, Walla Walla District, is soliciting a firm fixed price contract for the rehabilitation of twelve draft tube bulkheads and associated seal keeper bars at Dworshak Dam. This total small business set-aside project requires the contractor to provide all personnel, materials, equipment, and supervision necessary for the pickup, dry-blast cleaning to white metal, weld repair, and new coating application of the bulkheads. The work must be performed in accordance with strict industry standards, including AWS D1.1 for welding and SSPC SP 5 / NACE No. 1 for surface preparation. Deliverables are scheduled across multiple units, with specific return dates such as January 23, 2027, for Unit 4 and April 19, 2027, for Unit 5. The contractor must be a certified SSPC QP 3 painting contractor or hold an AISC Complex Coatings endorsement and provide a third-party certified coatings inspector at the SSPC-PCI Level 2 or NACE CIP Level 2. Quality assurance is paramount, requiring detailed inspection reports for each bulkhead and the use of magnetic flux thickness gages per ASTM D7091. The government reserves the right to conduct quality assurance inspections at the contractor's facility. Proposals are due by October 30, 2026, and will be evaluated based on price and other factors to determine the most advantageous offer. All shipping is required to be FOB destination to the Dworshak Project Office in Ahsahka, Idaho.

Metal Coating, Engraving (except Jewelry and Silverware), and Allied Services to Manufacturers

POSTED

DEADLINE

CAMP WOOTEN/STARBUCK LEVEE REHAB

Solicitation # W912EF27RSS01

The United States Army Corps of Engineers, Walla Walla District, is conducting market research to identify capable businesses for the Camp Wooten and Starbuck Levee rehabilitation projects in Columbia County, Washington. This effort is a sources-sought notice and not a formal solicitation. The project involves repairing scour and erosion damage on the Tucannon River levees through reconstruction and riprap armoring. The estimated construction value ranges from 500,000 to 1 million dollars for Camp Wooten and 1 million to 5 million dollars for Starbuck. The government intends to award a single firm-fixed-price contract in December 2026, with work scheduled between January and March 2027. Qualified firms under NAICS code 237990 must submit their capabilities, past performance, business size, and bonding capacity to Nathan Bruce by 2:00 p.m. PDT on October 30, 2026. Requirements for the selected contractor include providing a Site Safety and Health Officer with specific OSHA training, a Certified Erosion and Sediment Control Lead, and adherence to the USACE Safety and Health Requirements Manual. Additionally, the contractor must utilize the Resident Management System for project documentation and provide necessary performance and payment bonds.

Other Heavy and Civil Engineering Construction

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS