This Government Contract opportunity from Department Of Defense was posted on August 27, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Industrial Coating and Finishing

Closed

Federal

Submission Closed09/08/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 332431

New

DIBBS

Aluminum Alloy Sheet SupplierThis subcontract opportunity is for the supply of raw aluminum alloy sheets to prime contractors supporting DLA Troop Support, Construction and Equipment Metals contracts. The required materials consist of sheets measuring 0.224 inches thick, 48.00 inches wide, and 144.00 inches long, with an approximate weight of 154.82 pounds per sheet. All deliverables must strictly adhere to the DLA Master List of Technical and Quality Requirements RA001 and follow RP001 packaging standards. Managed by the Department of Defense through DLA DIST San Joaquin, this procurement is designated as a Total Small Business Set-Aside under NAICS code 332431. The place of performance is located in Tracy, California. Interested parties must submit their responses by the deadline of November 16, 2026.

POSTED

DEADLINE

High Magnesium Aluminum Alloy Sheet SupplyThis subcontract involves the supply of ten high magnesium aluminum alloy metal sheets to prime contractors supporting DLA Troop Support Construction and Equipment contracts. Each sheet must measure 0.190 inches thick, 60.00 inches wide, and 240.00 inches long, adhering strictly to all procurement specifications. A key requirement of the contract is the application of continuous identification markings via stamping or stenciling, which must include the dimensions, heat or lot numbers, and relevant contract numbers. Managed by the Department of Defense through Puget Sound, the work is to be performed in Bremerton, Washington. The opportunity is categorized under NAICS code 332431, with a response deadline set for November 16, 2026.

POSTED

DEADLINE

Supply of Non-Electrical Aluminum Alloy WireThis subcontract involves the supply of non-electrical aluminum alloy wire to prime contractors supporting DLA Troop Support contracts for the Department of Defense. The scope of work requires the manufacture or sourcing of 31 units of round aluminum alloy wire, specifically identified by NSN 9525-01-224-7235, with a diameter of 0.091 inches and a length of 0.422 feet. A critical requirement of the agreement is the provision of a mandatory Certificate of Quality Compliance, also known as Mill-Material Certification, which must accompany every shipment. The performance of this contract is centered in Jacksonville, Florida, under NAICS code 332431.

POSTED

DEADLINE

Supply of Forged Flat Aluminum Alloy 2014-T6 BarsThis subcontract through the Department of Defense DDSP New Cumberland Facility involves the supply of forged flat aluminum alloy 2014-T6 bars. The material must be forged to specific dimensions of 2.500 inches in thickness, 4.750 inches in width, and 12.00 feet in length, with a total delivery requirement of 14,000 linear feet. These supplies are intended for prime contractors fulfilling DLA Troop Support Construction and Equipment Metals contracts. Compliance with industry standards is mandatory, requiring packing according to ASTM B660 and marking in accordance with MIL-STD-129. The performance of the contract will take place in New Cumberland, Pennsylvania. Interested parties should note the response deadline of November 16, 2026, under NAICS code 332431.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

High-Magnesium Aluminum Alloy Plate SupplierThis subcontract through the Department of Defense DDSP New Cumberland Facility involves the supply of high-magnesium aluminum alloy plates for prime contractors on DLA supply contracts. The required plates must measure 0.750 inches thick, 60.00 inches wide, and 240.00 inches long, with a strict requirement for dimensional accuracy without the use of test coupons. Due to the specifications, the supplier must possess industrial cutting and milling equipment to ensure the material meets all physical standards. Every shipment must be accompanied by a Certificate of Quality Compliance, also known as Mill-Material Certification, to verify that the aluminum plates and certifications are conforming. The opportunity was posted on November 2, 2026, with a response deadline of November 13, 2026. Performance for this contract will take place in New Cumberland, Pennsylvania, under NAICS code 332431.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Metallic Tube Supplier (NSN 4710-01-627-1291)This subcontract involves the supply of five specialized metallic tubes for the Department of Defense under the DLA Weapons Support Maritime Supply Chain. The supplier is responsible for manufacturing or sourcing tubes identified by NSN 4710-01-627-1291 and Part Number 230-00047-APE-1, ensuring all deliverables meet the quality control standards specified in the RA001 technical requirements. Strict adherence to the Buy American Act and the Berry Amendment is required for all materials provided. The opportunity was posted on November 2, 2026, with a response deadline of November 13, 2026, falling under NAICS code 332431.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

Supply of 90/10 CuNi Pipe Elbows (NSN 4730014637038)This subcontract involves the manufacture and supply of 77 units of 90/10 Copper-Nickel pipe elbows, identified by NSN 4730014637038, for prime contractors supporting the DLA Weapons Support Fluid Handling Division. The required components are 3/4 inch nominal pipe size, short radius elbows with a 90-degree flow angle and socket-weld ends. Performance of the contract takes place in Tracy, California, under NAICS code 332431. The supplier is responsible for providing comprehensive quality documentation, including material and process certifications, manufacturing drawings, and inspection method sheets. Additionally, the contractor must facilitate Government production lot testing to ensure all units meet the specified technical standards before final delivery.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

Aluminum Alloy 7050 Plate SupplierThis subcontract involves the supply of high-specification aluminum alloy 7050 metal plates to prime contractors for Defense Logistics Agency procurement projects. The required material must conform to SAE AMS4050K and Temper T7451 standards, specifically cut to dimensions of 3 by 48 by 144 inches according to drawing 14153 01735. The successful provider must utilize precision cutting equipment and ensure full compliance with the Buy American Act. The scope of work requires the delivery of one aluminum alloy plate accompanied by a Mill-Material Certification. This opportunity falls under NAICS code 332431 and is managed through the Department of Defense. Interested parties must adhere to the established timeline, with the response deadline set for November 13, 2026.

Defense Logistics Agency

POSTED

DEADLINE

Flexible Aluminum Nose Clip SupplierThis subcontract involves the supply of medical-grade flexible aluminum nose clips for prime contractors working on Defense Logistics Agency Troop Support Medical Supply Chain projects. The scope of work requires the manufacture of precision-cut aluminum strips specifically designed for pediatric mask fitment, with a delivery requirement of one clip per mask unit. The supplier must ensure all products comply with medical-grade material certifications as well as the Buy American Act and Berry Amendment. This opportunity is categorized under NAICS code 332431 and is managed by the Department of Defense.

Defense Logistics Agency

POSTED

DEADLINE

70-30 Seamless Metallic Tubing SupplyThis subcontract through the Defense Logistics Agency involves the supply of 2,243 feet of high-specification metallic tubing for the Weapons Support Nuclear Reactor Program. The contractor is responsible for manufacturing Type I seamless tubing with a 70-30 composition, annealed temper, Class 200, Grade 1, featuring a 1.315 inch outer diameter and 0.065 inch wall thickness. All materials must be produced using traditional methods and undergo hydrostatic testing and marking in accordance with MIL-T-16420K(1). To be eligible, the provider must hold SAE AS9003 or ISO 9001 certification and ensure all tubing is properly tested, marked, and packaged for delivery to prime contractors.

Defense Logistics Agency

POSTED

DEADLINE

Supply of Metal Sheets (NSN 9535-00-167-2279)This subcontract through the Defense Logistics Agency involves the supply of 76,000 specialized metal sheets under NSN 9535-00-167-2279 for prime contractors on Department of Defense projects. All provided materials must conform to the exact dimensions and whole feet lengths specified in the item description. To ensure quality and compliance, the use of additive manufacturing and test coupons is strictly prohibited unless prior approval is granted by the ESA. Eligible providers must maintain active SAM registration and possess a valid UEI and CAGE code to facilitate access to the Wide Area Workflow system. The solicitation was posted on November 2, 2026, with a response deadline of November 13, 2026. This procurement falls under NAICS code 332431.

Defense Logistics Agency

POSTED

DEADLINE

Supply of Aluminum Alloy 7075-T6 Metal SheetsThis subcontract involves the supply of 137 precision-cut aluminum alloy sheets for prime contractors supporting the Defense Logistics Agency. The materials must strictly conform to NSN 9535002307545, specifying Aluminum Alloy 7075 with Temper T6 and dimensions of 0.032 inches thick by 48 inches wide by 144 inches long. Production must be carried out using industrial shearing equipment, as the use of additive manufacturing is explicitly prohibited. The opportunity was posted on November 2, 2026, with a response deadline of November 13, 2026, falling under NAICS code 332431 for the Department of Defense.

Defense Logistics Agency

POSTED

2 days ago

DEADLINE

in 9 days

AI Contract Overview

This subcontract for industrial coating and finishing is issued by the Department of Defense under the LSO Combat Vehicles and Armament agency. The scope of work involves providing specialized surface preparation, priming, and the application of military-specification paints or powder coatings to finished vehicular doors. To fulfill these requirements, the contractor must utilize industrial spray booths and powder coating ovens while strictly adhering to DLA quality standard RA001. The contract is classified under NAICS code 332431 and is designated as a subcontract for prime contractors delivering DLA supply contracts. Performance of the work is located in New Cumberland, and the solicitation period is active with a response deadline of September 8, 2026. This opportunity is specifically designed for entities capable of meeting rigorous military-grade finishing standards for combat vehicle components.

General Info

DoD subcontract for military-grade industrial coating and finishing of combat vehicle doors.

Agency

Department Of Defense → LSO COMBAT VEHICLES AND ARMAMENT

NAICS

332431 - Metal Can Manufacturing

Place of Performance

NEW CUMBERLAND, PA, 17070-5002, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE7L4-26-T-6634.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

DOOR, VEHICULAR

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed

PostedAug 27

subcontract

Response DeadlineSep 8

Deadline has passed

Submission Closed

09/08/2026, 05:00:00 PM UTC

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → LSO COMBAT VEHICLES AND ARMAMENT

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → LSO COMBAT VEHICLES AND ARMAMENT

Office AddressN/A

ContactsNo contact information available

Full Description

Applies protective coatings and finishes for prime contractors delivering DLA supply contracts. Performs surface preparation, priming, and application of military-spec paints or powder coatings using industrial spray booths and powder coating ovens. Adheres to DLA quality requirements (RA001). Delivers the finished and painted vehicular door.