This Government Contract opportunity from Department Of Justice was posted on August 26, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Office Furniture Tooling and Mold Fabrication

Closed

Federal

Submission Closed09/25/2026, 06:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 332431

New

SLED

Shelving and Tooling Material SupplyThis subcontract, titled Shelving and Tooling Material Supply, involves the provision of OEM cabinetry and shelving components for prime contractors working on Sacramento County step van upfit projects. The scope of work includes the delivery of cabinets, shelving units, drawers, dividers, and hemmed metal flashing designed for maximum capacity loads. All supplied materials must be new, current-production models that adhere strictly to manufacturer specifications. The contract specifically requires the delivery of shelving, cabinetry, and hardware kits for five vans of varying sizes, including 14ft, 16ft, and 18ft models. Managed under the California DGS: CAPSD Procurement agency, the solicitation was posted on October 1, 2026, with a response deadline of November 4, 2026. The project falls under NAICS code 332431.

DGS: CAPSD - Procurement

POSTED

DEADLINE

Aluminum Alloy Sheet Material SupplierThis subcontract involves the supply of raw aluminum alloy metal sheets to prime contractors for delivery to DLA Troop Support Construction and Equipment. The requirement specifies 16 packaged and palletized sheets measuring 0.010 inches thick, 48.00 inches wide, and 144.00 inches long, in accordance with NSN 9535000047321. All materials must strictly adhere to MIL-STD-129 marking standards and RP001 and MIL-STD-2073-1E packaging requirements. The contract is associated with the Department of Defense and Depot Oklahoma, with the place of performance located at Tinker AFB. Operating under NAICS code 332431, the solicitation was posted on October 1, 2026, with a response deadline of October 13, 2026.

POSTED

DEADLINE

Supply of Welding Electrodes (NSN 3439-01-651-1449)This subcontract involves the supply of 60,000 individual welding electrodes to the DDSP New Cumberland Facility for prime contractors supporting DLA Troop Support Construction and Equipment contracts. The provided materials must strictly match the specifications for NSN 3439-01-651-1449 and be delivered to the designated government facility in New Cumberland, Pennsylvania. Compliance is required regarding RP001 DLA Packaging Requirements and the Hazard Communication Standard 29 CFR 1910.1200 for the labeling of hazardous materials. The opportunity falls under NAICS code 332431, with a response deadline set for October 13, 2026.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Clad Metal Sheet Manufacturing and SupplyThis subcontract involves the manufacturing and supply of precision-cut clad metal sheets for prime contractors supporting DLA Troop Support Construction and Equipment projects. The scope of work requires the production of 27 sheets, each measuring 60 inches in width and 144 inches in length with a thickness of 0.050 inches and 0.0025 inches of cladding on both sides, adhering to Drawing 01735 and a reference weight of 43.200 pounds per sheet. The project is managed under the Department of Defense through the Warner Robins agency, with performance taking place at Robins Air Force Base. All deliverables must comply with MIL-STD-129 for marking and MIL-STD-2073-1E for packaging. The opportunity is categorized under NAICS code 332431, with a response deadline set for October 13, 2026.

POSTED

DEADLINE

Supply of Military Fuel Cans (Field Drab)This subcontract involves the manufacture and supply of 519 military fuel cans for prime contractors under DLA supply contracts. The cans must be produced according to NSN 7240-01-337-5349 specifications, featuring a Field Drab finish in Color No. 33105. Compliance requirements include identification marking per MIL-STD-130N, the provision of Mill-Material Certification, and a CMMC Level 2 Self-Assessment. The project is managed by the Department of Defense through the DDSP New Cumberland Facility, with performance taking place in New Cumberland, Pennsylvania. The completed fuel cans are to be delivered FOB Origin. Interested parties must adhere to the response deadline of October 13, 2026.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Supply of Aluminum Alloy Sheets (NSN 9535-01-047-6450)This subcontract involves the supply of 10 aluminum alloy sheets meeting NSN 9535-01-047-6450 specifications for prime contractors under Department of Defense supply contracts. The work is managed by the San Diego agency and will be performed in San Diego, California. The procurement falls under NAICS code 332431 and requires strict adherence to technical standards, including preservation and packing per ASTM B660, palletization per RP001, and marking per MIL-STD-129. The contractor is required to provide a Certificate of Quality Compliance and Mill-Material Certification with every shipment to ensure material integrity. The response deadline for this opportunity is October 13, 2026. Final delivery consists of the 10 specified aluminum alloy sheets and the accompanying quality documentation.

POSTED

DEADLINE

Solicitation # 232321

The City of Los Angeles General Services agency is seeking bids for the procurement of used metal drums under solicitation number 232321. This opportunity is categorized under NAICS code 332431 and will be performed within Los Angeles, California. Interested parties must submit their responses by the deadline of October 13, 2026, at 6:00 PM. Detailed information and the bidding process are available through the City of LA Vendor Self Service Website, and inquiries can be directed to the point of contact, Katherine Quinn.

POSTED

DEADLINE

Copper Tubing Supplier (NSN 4710009954845)This subcontract through the Department of Defense Fluid Handling Division requires the supply of one coil of annealed copper tubing for prime contractors on DLA Aviation supply contracts. The tubing must feature a 0.062 inch outer diameter and a 0.015 inch wall thickness, provided in 50 foot coiled lengths with sealed ends. Performance will take place at Minot AFB. The supplier must ensure all materials adhere to ASTM B280-08 and ASTM B88-2016 standards, with sampling conducted according to MIL-STD-1916 or ASQ H331. Additionally, the contract mandates strict compliance with DFARS Buy American regulations and MIL-STD-129/2073-1E packaging requirements. Responses are due by October 13, 2026.

FLUID HANDLING DIVISION

POSTED

DEADLINE

Supply of Aluminum Alloy 7050-T7451 (AMS4050)This subcontract involves the supply of three units of high-strength aluminum alloy 7050-T7451 for prime contractors supporting Department of Defense DLA supply contracts. The material must strictly adhere to SAE-AMS4050 standards and be provided in dimensions of 1.75 by 6.00 by 1 inch. Performance will take place in San Diego, with the supplier responsible for meeting all technical specifications and quality requirements. The supplier must ensure all materials are packaged according to RP001 and MIL-STD-129, including mandatory hazard labeling per DFARS 252.223-7001. Essential documentation requirements include the submission of required CDRLs and DD Form 1423 material certifications to verify the alloy's properties. The solicitation was posted on September 29, 2026, with a response deadline of October 7, 2026.

DLA RECEIVING OFFICER NAVAL BASE CORONADO BLDG

POSTED

DEADLINE

CARC and High-Temperature Coating ApplicationThis subcontract through the Department of Defense Land Supply Chain involves providing specialized chemical agent resistant coating and high-temperature painting services for prime contractors on DLA supply contracts. The scope of work requires the preparation of surfaces and the application of coatings in accordance with DCCSD Drawing 16236 CS-2300–0001 to ensure all metal components meet strict Army requirements for heat tolerance and chemical resistance. Operations must utilize approved CARC paint systems and adhere to hazardous material handling protocols per IP025. The performance of this contract is located in Texarkana, Texas, under NAICS code 332431. Interested parties must respond by October 13, 2026, to provide coated components that meet all specified military finish standards.

POSTED

DEADLINE

Double-Wall Steel Fuel Tank FabricationThis subcontract involves the fabrication of double-wall steel fuel tanks for prime contractors working on mobile power equipment projects within the York Region. The scope of work focuses on constructing tanks that are integrated into generator trailers, ensuring all units meet strict safety and environmental containment standards. To qualify, the contractor must provide certifications from ULC and Transport Canada specifically for double-wall steel construction. The final deliverable consists of certified fuel tanks fully installed on generator units. Interested parties must submit their responses by October 26, 2026.

POSTED

DEADLINE

Supply of Titanium Sheet Metal (AMS4902)This subcontract involves the supply of aerospace-grade Commercially Pure CP1 titanium sheet metal for prime contractors supporting Defense Logistics Agency material supply contracts. The material must be manufactured according to SAE AMS4902 REV M specifications, with specific dimensions of .025 inches by 36 inches by 96 inches. All shipments must include a Certificate of Quality Conformance and adhere to packaging and labeling standards defined by ASTM D3951, RA001, and MIL-STD-129. The contract is managed by the Department of Defense through the DLA Fleet Readiness Center, with the place of performance located in Cherry Point. Interested parties must respond by October 6, 2026, under NAICS code 332431. The primary deliverable consists of the specified titanium sheet metal accompanied by the required quality certification.

DLA FLEET READINESS CENTER DLA PSC

POSTED

7 days ago

DEADLINE

in about 17 hours

AI Contract Overview

This subcontract for Office Furniture Tooling and Mold Fabrication supports prime contractors on UNICOR modular panel system projects for the Department of Justice. The selected provider will design and manufacture a comprehensive suite of production tooling, including molds, fixtures, jigs, templates, and gauges, utilizing CNC machining and precision gauging tools. Responsibilities include developing all necessary programming, engineering drawings, and manufacturing documentation to ensure a complete delivery of technical assets. The contract requires the provider to maintain ISO Certification to ensure quality standards. Performance will take place in Coleman, Florida, under NAICS code 332431. Interested parties must submit their responses by September 25, 2026.

General Info

Subcontract for office furniture tooling and mold fabrication for DOJ projects in Florida.

Agency

Department Of Justice → Inc Federal Prison Industries

NAICS

332431 - Metal Can Manufacturing

Place of Performance

Coleman, FL, 33521, USA

Set-Aside

NONE

Documents

This scope was carved out of FN1610-26.

The full solicitation package (7 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Office Furniture Systems and Components

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed

PostedAug 26

subcontract

Response DeadlineSep 25

Deadline has passed

Submission Closed

09/25/2026, 06:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Justice → Inc Federal Prison Industries

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Justice → Inc Federal Prison Industries

Office AddressN/A

ContactsNo contact information available

Full Description

Fabricates and supplies production tooling for prime contractors on UNICOR modular panel system projects. Designs and manufactures molds, fixtures, jigs, assembly fixtures, templates, and gauges using CNC machining and precision gauging tools. Develops programming, manufacturing documentation, and engineering drawings. ISO Certification required. Delivers a complete set of production tooling and technical documentation.