Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Industrial Coating Application for Rebuilt Valve

Active

State & Local

Response Deadline07/22/2026, 07:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires the application of an industrial protective coating to a fully reassembled 30-inch check valve to safeguard it against corrosion in a raw water environment, with compliance mandated to either the manufacturer’s specifications or accepted AWWA/NACE standards. The scope of work is focused solely on the coating process after valve assembly, ensuring long-term durability and operational integrity under harsh water exposure conditions. The solicitation is issued as a subcontract under NAICS code 332813, targeting qualified vendors with expertise in industrial corrosion protection. The City of Rocky Mount in North Carolina has posted this opportunity with a response deadline of July 22, 2026, and the solicitation was made available on July 9, 2026. No set-aside designation has been specified, and the place of performance details are not provided, though the work pertains to a valve that has already been rebuilt. Potential bidders must adhere strictly to the technical requirements for coating application and material selection to meet industry-recognized corrosion resistance benchmarks. The official solicitation can be accessed through the provided state portal, and all submissions must be completed prior to the stated deadline.

General Info

Apply industrial protective coating to reassembled 30-inch check valve per AWWA/NACE standards by July 22, 2026.

Agency

North Carolina → City of Rocky MountView Agency

NAICS

332813 - Electroplating, Plating, Polishing, Anodizing, and ColoringView NAICS

Place of Performance

NC, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 9

subcontract

Response DeadlineJul 22

Submission deadline

Response Deadline

07/22/2026, 07:00:00 PM UTCin about 11 hours

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyNorth Carolina → City of Rocky Mount

ContactsNo contacts available

OfficeN/A

Organization / Agency

North Carolina → City of Rocky Mount

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Apply protective industrial coating to the fully reassembled 30-inch check valve to ensure corrosion resistance in raw water environment, per manufacturer or AWWA/NACE standards.

Similar Contracts

Same NAICS industry code

ANODE ASSEMBLYThe contract is for one anode assembly designated for tantalum material rated at 150 amps, identified by NSN 3426-01-089-7318 and part number W3T105082, supplied by EVOQUA WATER TECHNOLOGIES LLC. It is a sole-source procurement under solicitation SPE8E6-26-T-3767 with a total quantity of one unit, priced at $1.00, and requires delivery within five days of contract award to the destination FPO AP 96660 aboard the USS ASHLAND LSD 48. All packaging must comply with MIL-STD-2073-1E and MIL-STD-129, including special Type I shelf-life marking indicating a non-extendable 12-month shelf life, with no room for variance in quantity. The item must be packed in a single box sufficient to prevent damage; if multiple boxes are needed, each must be labeled as part of a kit with sequential identification, include an internal contents list, and be properly cushioned. Mercury and mercury-containing compounds are strictly prohibited unless exempted for functional uses like batteries, instruments, or sensors as specified by NAVSEA, and any permitted mercury-containing devices must have a secondary containment barrier. Hazardous materials shipping regulations apply, and the shipment must be sent via the fastest traceable method—parcel post is explicitly forbidden. The contract incorporates all referenced technical and quality requirements from the DLA Master List, and the packaging and marking guidelines are governed by RP001, with additional compliance required for covered defense information under RD003. The purchase is part of a total small business set-aside under NAICS code 332813, with the Defense Logistics Agency as the administering agency.

Defense Logistics Agency

POSTED

about 15 hours ago

DEADLINE

34--ANODE ASSEMBLY

DLA Troop Support

POSTED

about 20 hours ago

DEADLINE

Precision Metal Component ManufacturingThe contract requires the manufacture of a precision metal component: a straight, headless pin to be produced through either precision machining or cold-forming processes, ensuring strict adherence to military specifications and tight dimensional tolerances. The part must meet exacting quality and functional standards consistent with defense industry requirements, and production must align with the designated NAICS code 332813, which classifies the work under Other Fabricated Wire Product Manufacturing. The place of performance is specified as New Cumberland, Pennsylvania, with a zip code of 17070-5002, indicating where the manufacturing and delivery activities must occur. The contract is structured as a subcontract under the Department of Defense, managed by the ASC SUPPLIER OPER OEM DIVISION, and was posted on July 20, 2026, with a firm response deadline of July 28, 2026. No solicitation number is provided, and there is no set-aside designation, meaning the opportunity is open to all eligible subcontractors without preference based on size, ownership, or location. The contractual obligation centers on delivering a component that meets rigorous performance criteria, and all submissions must be directed through the designated DIBBS portal linked in the posting.

ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

Surface Treatment and Corrosion ProtectionThis contract involves the application of protective surface treatments such as zinc plating and anodizing to defense equipment to ensure compliance with stringent environmental durability and corrosion resistance standards. The work is part of a subcontract under the Department of Defense and is managed by the Defense Logistics Agency, with the North American Industry Classification System code 332813 indicating specialization in metal coating, engraving, and allied services. The contract is posted for solicitation and pertains to the enhancement of equipment longevity under harsh operational conditions, which is critical for military applications. Performance location and specific site details are not provided, but the requirement emphasizes adherence to technical specifications for corrosion protection in defense systems. The contractual obligations center on delivering finished components that meet or exceed federal and military durability benchmarks, with the work expected to support the readiness and reliability of defense assets.

Defense Logistics Agency

POSTED

DEADLINE

Precision Fabricated Metal Component SupplyThe contract mandates the supply of a precision-engineered tube assembly set adhering strictly to military specifications, with absolute compliance required across all critical and major attributes, allowing zero non-conformance. The components must be manufactured and inspected in alignment with ISO 9001:2015 quality management standards and packaged and labeled per MIL-STD-2073-1E and MIL-STD-129 to ensure full interoperability and traceability within defense logistics systems. All work is to be performed under the authority of the Department of Defense, specifically the Aviation Supply Chain ESOC Buys division, with performance obligations centered at Tinker Air Force Base, Oklahoma, 73145-9031. The procurement is designated as a subcontract under NAICS code 332813, which classifies it within the atmospheric and water heating equipment manufacturing sector, indicating specialized fabrication capabilities are required. Proposals must be submitted by the deadline of July 28, 2026, with solicitation initiated on July 20, 2026, leaving a narrow window for qualified suppliers to respond. The requirement demands rigorous quality assurance, end-to-end documentation, and logistical readiness to support defense operations without delay or deviation.

AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

Metal Casting and Tooling for Aerospace Housing

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Surface Treatment & Coating Services

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Identification Plate Manufacturing (Metal Stamping & Engraving)The contract entails the manufacture and supply of serialized metal identification plates designed to meet rigorous military National Stock Number specifications, requiring precise stamping, engraving, and MIL-STD-129 marking to ensure compliance with Department of Defense standards. These plates are critical for asset tracking and logistics management across military supply chains, and their production must adhere to exacting dimensional, material, and durability requirements to function reliably in operational environments. The work is being performed under a subcontract tied to a Defense Logistics Agency procurement, with the North American Industry Classification System code 332813 indicating specialized metal stamping and forging activities. The contract was posted on July 20, 2026, and is administered through the DLA’s procurement portal under the award number SPE7LX24D0020 with delivery order SPE7L126F061Q, though no specific place of performance or point of contact details are provided. The subcontract nature implies the original prime contract is held by another entity, and the supplier is expected to deliver fully compliant plates without deviation from military standards, potentially involving quality control inspections, serialized batch tracking, and documentation for audit readiness. All produced items must be traceable and clearly labeled in accordance with MIL-STD-129 to ensure seamless integration into Defense Logistics Agency inventory systems.

Defense Logistics Agency

POSTED

DEADLINE

Precision Aircraft Frame ManufacturingThe contract calls for the fabrication of a precision aircraft frame meeting exacting dimensional tolerances based on approved stable base drawings, with delivery required to Fort Hood, Texas, zip code 76544. The work is classified as a subcontract under NAICS code 332813, indicating specialized manufacturing in the aerospace sector, and is being managed by the Department of Defense through the AVIATION SUPPLY CHAIN ESOC BUYS organization. The solicitation was posted on July 20, 2026, with a firm deadline for responses on July 28, 2026, and bidders must be prepared to meet stringent quality and precision standards critical to aircraft structural integrity. The place of performance is locked to Fort Hood, requiring logistics and delivery coordination to that specific military installation.

AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

Heat Treatment and Surface Finishing ServicesThe contract seeks qualified subcontractors to provide heat treatment services including quenching and tempering, along with surface finishing processes such as plating, passivation, and black oxide application for bolts, all required to meet rigorous military performance standards. The work must be performed at the designated place of performance in New Cumberland, Pennsylvania, with an official zip code of 17070-5002, and must comply with the NAICS code 332813 for metal heat treating. The solicitation is issued under the Department of Defense through the ASC Commodities Division and is categorized as a subcontract opportunity. Interested parties must submit responses by the deadline of July 28, 2026, at 5:00 PM ET, following the instructions outlined on the official DIBBS procurement portal linked in the solicitation. There is no set-aside designation specified, meaning the contract is open to all eligible subcontractors regardless of business size or status.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Metal Plating and Coating ServicesThe contract calls for the provision of corrosion-resistant or conductive plating services on electrical hardware, specifically including coatings such as cadmium, zinc, and nickel, to ensure compliance with rigorous military performance and environmental standards. The work is intended to support defense-related applications where durability, conductivity, and resistance to harsh conditions are critical, and must be executed to meet exacting specifications required by the Department of Defense. The services are being procured as a subcontract under the NAICS code 332813, which designates metal coating, engraving, and related services. Awarded by the Defense Logistics Agency, this subcontract is linked to the contract SPE7M526D62DK and was posted on July 20, 2026. While specific location details for performance or point of contact are not provided, the work is expected to be carried out in alignment with federal defense contracting requirements. The absence of a set-aside designation indicates it is open to all eligible contractors, and the focus remains on delivering high-integrity surface treatments that sustain operational readiness under demanding military environments.

Defense Logistics Agency

POSTED

DEADLINE

Specialized Coating and Plating Services

LAND SUPPLY CHAIN

POSTED

DEADLINE

More opportunities from North Carolina → City of Rocky Mount

Same awarding agency

HVAC Maintenance FY27The Contractor is required to provide comprehensive HVAC maintenance and repair services for all building systems, ensuring routine preventative care that minimizes downtime through scheduled inspections and proactive servicing performed to the highest industry standards. This includes full labor and material coverage for all necessary components such as filters, belts, refrigerant, oil, grease, water treatment, touch-up paint, and mechanical and electrical parts required to keep equipment operating per manufacturer specifications. The scope extends to refrigeration units like ice machines and walk-in coolers, and requires replacement of worn or failed moving parts including bearings, motors, actuators, controls, and burners, with prior system troubleshooting before any work begins. The Contractor must maintain on-site staffing, tools, equipment, and vehicles to support service during normal business hours Monday through Friday, 8:00 A.M. to 5:00 P.M., excluding recognized holidays, and must also respond to urgent issues outside those hours. All work must comply with Federal, State, CARB, AQMD, OSHA, and all other applicable regulations. The Contractor is responsible for providing a detailed inventory of all repairable and replaceable equipment and must consult with the City representative prior to replacing any non-repairable unit, offering an estimate for an equivalent replacement. Work explicitly excluded from this contract includes original system design and installation, utility service issues, non-moving components like heat exchangers and piping, gas and water supply lines, ductwork, air balancing, thermal insulation, damage from misuse or vandalism, alterations by third parties, catastrophic natural events, structural modifications, electrical service beyond HVAC equipment, electrolysis, government or insurance-mandated work, and individual ceiling-mounted restroom ventilation fans. The solicitation, titled HVAC Maintenance FY27 and identified as 320-190526AG, is issued by the City of Rocky Mount in North Carolina, with responses due by August 6, 2026, and primary point of contact listed as Alicia Gaines.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

about 15 hours ago

DEADLINE

Precision Machining of Bronze and Steel Valve ComponentsThe contract calls for precision fabrication and machining of critical valve components including bronze bushings, gland bushings, valve shaft, and body seat ring, all to be manufactured from specified materials to meet exacting technical standards. The work is classified under NAICS code 332721 and issued as a subcontract by the City of Rocky Mount in North Carolina, with a posted date of July 9, 2026, and a firm response deadline of July 22, 2026. All components must be produced with high accuracy and adherence to material specifications to ensure proper function in demanding valve applications. The place of performance is not specified, but the work is expected to be completed by subcontractors capable of precision machining in bronze and steel, with no set-aside restrictions indicated. The solicitation is accessible via a public link for detailed requirements and submission instructions.

Precision Turned Product Manufacturing

POSTED

DEADLINE

in about 11 hours

Large-Diameter Valve Rebuild and MachiningThe contract involves the complete reconstruction of a 30-inch M&H check valve requiring full disassembly, thorough inspection, precision machining, and custom fabrication followed by reassembly to original specifications. Critical components including the shaft, bushings, seat ring, and lid sleeve must be replaced with new parts meeting established standards, ensuring optimal performance and longevity. The work must be performed to exacting engineering and quality control parameters, with special attention to dimensional accuracy and material integrity throughout each stage of the rebuild. Final completion requires applying a protective coating to the assembled valve in compliance with industry standards, ensuring corrosion resistance and operational durability under demanding conditions. The project is issued as a subcontract by the City of Rocky Mount under NAICS code 332994, with a response deadline of July 22, 2026, and a posted date of July 9, 2026. All work must be performed in accordance with technical requirements dictated by the valve’s original design and functional specifications, with no deviations permitted without prior approval.

Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

DEADLINE

in about 11 hours

Rebuild 30-Inch M&H Check Valve – Tar River Water Supply Reservoir DamThe City of Rocky Mount is seeking a qualified fabricator to rebuild a 30-inch M&H check valve for use at the Tar River Reservoir Dam Raw Water Intake, with the final delivery to the Tar River Reservoir Water Treatment Plant at 4489 Leaston Rd., Rocky Mount, NC 27803. The scope of work requires the complete disassembly, machining, fabrication, and reassembly of the valve, including the provision of all new components such as a valve shaft, two bronze body bushings, new gland bushings, a body seat ring, a replaced swing seat with newly drilled bolt holes, new keys, and the removal and replacement of old set screws in the armature. The valve body lid must be machined and sleeved, old bolts extracted, and all surfaces prepared to restore the valve to operational condition. The final rebuilt valve must be coated per manufacturer or industry standards and delivered within ninety days of contract award. The City will handle offloading using its own forklift. The solicitation requires vendors to provide itemized pricing for all labor, parts, materials, and equipment as either a lump sum or not-to-exceed amount, with bids due by July 22, 2026, submitted via email to Fantashia Dickens. Proposals must include lead and delivery timelines, confirmation of relevant licensing and qualifications, and references demonstrating experience rebuilding 24-inch or larger check valves for public-sector water utilities. Contractors must be licensed and qualified in machining, fabrication, and coating, and all work must comply with applicable state and local procurement requirements, municipal purchasing standards, and generally accepted valve and pressure-piping repair practices. Documentation of inspection and QA/QC records is mandatory, and the award will be made to the lowest responsive, responsible vendor or as determined to be in the City’s best interest, with the City retaining the right to reject any or all submissions. Technical inquiries regarding valve inspection should be directed to James Patterson at (919) 895-8306.

Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

DEADLINE

in about 11 hours

Safety and QA/QC Program ImplementationThe contract titled Safety and QA/QC Program Implementation requires the development and implementation of comprehensive quality assurance, quality control, and safety programs specifically tailored for water tank maintenance operations. This includes creating site-specific plans, establishing robust incident reporting procedures, and conducting regular compliance audits to ensure adherence to industry standards and regulatory requirements. The work is focused on enhancing operational safety and consistent quality across all maintenance activities related to water storage infrastructure. This is a subcontract opportunity posted by the City of Rocky Mount in North Carolina with a response deadline of July 28, 2026. The North American Industry Classification System code 541690 indicates the scope is aligned with other scientific and technical consulting services. The contract does not specify a set-aside type or point of contact, and performance location details are not provided, suggesting flexibility or that work will be conducted at various water tank sites under the city’s jurisdiction. Interested parties must submit proposals by the stated deadline to be considered for this engagement.

Other Scientific and Technical Consulting Services

POSTED

DEADLINE

Structural Rehabilitation and Repair ServicesThe contract entails comprehensive structural rehabilitation and repair services for aging water storage tanks, requiring upgrades, weld repairs, foundation stabilization, and component replacements to ensure long-term functionality and safety. All work must adhere strictly to AWWA standards, ensuring industry-best practices are followed for material selection, construction techniques, and quality assurance. The scope focuses on extending the service life of critical infrastructure while maintaining compliance with engineering and regulatory requirements for public water systems. This subcontract opportunity is issued by the City of Rocky Mount in North Carolina, with a posted date of June 25, 2026, and a formal response deadline of July 28, 2026. The NAICS code 238990 classifies the work under other specialized construction activities, indicating the specialized nature of the repairs and the expertise required from qualified contractors. Performance is expected to occur at designated water storage tank sites within the agency’s jurisdiction, though specific locations are not detailed. Interested parties must submit proposals by the stated deadline to be considered for award, with no set-aside provisions indicated for small businesses or other categories.

All Other Specialty Trade Contractors

POSTED

DEADLINE

Asset Management and Digital Reporting System DevelopmentThe City of Rocky Mount in North Carolina is seeking a subcontractor to develop and maintain a digital asset management system designed to track inspections, maintenance logs, and condition assessments for public infrastructure and equipment. The system must enable secure data transmission and provide robust reporting functionalities to support operational efficiency and compliance. The contract is categorized under NAICS code 541512, indicating it is related to custom computer programming services, and is structured as a subcontract opportunity with no specific set-aside designation. The solicitation was posted on June 25, 2026, and responses are due by July 28, 2026. The system will serve as a central platform for managing critical asset data, requiring integration capabilities, data security standards, and user-friendly interfaces for field and administrative staff. Performance of the work is expected to be conducted in support of the City’s operational needs, though the exact physical location for performance is not specified. All submissions must meet the technical requirements and deadlines outlined in the official solicitation available through the state’s procurement portal.

Computer Systems Design Services

POSTED

DEADLINE

Coating and Liner Application ServicesThe contract seeks qualified subcontractors to perform surface preparation, abrasive blasting, and the application of protective coatings and linings on the interior and exterior surfaces of water storage tanks. These services must use materials certified as safe for potable water to ensure compliance with health and safety regulations while preventing corrosion and extending the structural lifespan of the tanks. The work will be conducted in accordance with industry standards to maintain water quality integrity and regulatory adherence, with full attention to environmental and safety protocols during all phases of the project. Submitted proposals must respond by the deadline of July 28, 2026, and the contract falls under the NAICS code 332323 for coating and related work. The solicitation is issued by the City of Rocky Mount in North Carolina and is structured as a subcontract opportunity, though no specific set-aside provisions or point of contact are detailed. Interested parties should access the official solicitation through the provided link to review full requirements and submission instructions.

Ornamental and Architectural Metal Work Manufacturing

POSTED

DEADLINE

Preventive and Corrective Maintenance Services for Water TanksThe contract seeks providers to perform scheduled preventive maintenance and timely corrective maintenance on both elevated and ground-level water storage tanks, encompassing tasks such as coating touch-ups, leak repairs, and structural repairs to ensure system integrity and operational reliability. Work is required across all tank locations within the jurisdiction of the City of Rocky Mount in North Carolina, with emphasis on safety, durability, and compliance with industry standards for water infrastructure. The solicitation is identified as a subcontract under NAICS code 238990, with a posted date of June 25, 2026, and a response deadline of July 28, 2026. No set-aside designation is specified, and performance is expected to be carried out at the city’s water tank sites without restriction to specific geographic areas beyond the scope of the infrastructure. Interested parties must submit proposals through the designated state procurement portal prior to the stated deadline.

All Other Specialty Trade Contractors

POSTED

DEADLINE

Water Storage Tank Inspection and Non-Destructive Testing (NDT) ServicesThe contract seeks qualified contractors to perform comprehensive inspection and non-destructive testing services on water storage tanks, utilizing visual, ultrasonic, and structural integrity assessment methods to detect corrosion, coating degradation, and weld defects. The work requires specialized expertise in non-destructive testing techniques to ensure the continued structural safety and operational integrity of public water storage infrastructure without causing damage to the tanks during evaluation. All assessments must adhere to industry standards and produce detailed, actionable findings that support maintenance, repair, or replacement decisions. The solicitation is issued as a subcontract under NAICS Code 541350 and is managed by the City of Rocky Mount in North Carolina, with responses due by July 28, 2026. While specific performance locations and contact details are not provided, the contract implies that services will be conducted at multiple water storage tank sites within the jurisdiction. Interested parties must be prepared to meet technical, safety, and reporting requirements tied to public utility infrastructure maintenance, with the expectation of delivering accurate, reliable data to support the long-term reliability of the city’s water storage systems.

Building Inspection Services

POSTED

DEADLINE

Water Tank MaintenanceThe City of Rocky Mount is seeking qualified firms to provide long-term professional maintenance and asset management services for its water storage tanks and related structures over a ten-year period. The scope of work includes engineering and inspection services, rehabilitation, repair, repainting, washouts, and preventative maintenance, with the selected firm assuming full responsibility for all maintenance-related issues and ensuring compliance with all applicable state and local laws, rules, and regulations in North Carolina. The firm will also be solely responsible for obtaining all necessary permits, approvals, and other regulatory requirements required by state and municipal authorities. Solicitation number 320-320-090626FD was posted on June 25, 2026, with responses due by July 28, 2026. This request for qualifications is designed to identify the most capable and qualified provider to enter into a potential contract with the city, focusing on expertise, experience, and ability to deliver consistent, high-quality service over the long term. The point of contact for the solicitation is Tracy Winfield, and the services are to be performed within North Carolina. The contract award will not be based on price at this stage but on the demonstrated qualifications and competency of the responding firms.

Other Heavy and Civil Engineering Construction

POSTED

DEADLINE