Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Industrial Metal Cutting and Size Reduction

Active

Federal

Response Deadline12/10/2026, 09:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract for Industrial Metal Cutting and Size Reduction involves the breakdown and size reduction of a fluid cell press at Robins Air Force Base in Warner Robins. The selected contractor will support prime contractors on Air Force projects by performing hot work, including cutting and welding, using plasma cutters, industrial torches, or saws within designated on-base lay-down areas. The primary objective is to reduce equipment to dimensions suitable for transport and final disposal. Strict safety and regulatory compliance is required, specifically the maintenance of operational fire extinguishers at all cutting sites and adherence to DAF Form 592 Hot Work Permits. This opportunity is managed by the Department of Defense under the Maintenance Contracting AFSC PZIM, with a response deadline of December 10, 2026.

General Info

Subcontract for industrial metal cutting and size reduction at Robins Air Force Base.

Agency

Department Of Defense → FA8571 Maintenance Contracting Afsc Pzim

NAICS

332710 - Machine Shops

Place of Performance

Warner Robins, GA, 31098, USA

Set-Aside

NONE

Documents

This scope was carved out of 82247.

The full solicitation package (2 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Site Visit - Removal of Old Fluid Cell

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 20

subcontract

Response DeadlineDec 10

Submission deadline

Response Deadline

12/10/2026, 09:00:00 PM UTCin about 2 months

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → FA8571 Maintenance Contracting Afsc Pzim

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → FA8571 Maintenance Contracting Afsc Pzim

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs breakdown and size reduction of a fluid cell press for prime contractors on Air Force projects at Robins AFB. Executes hot work cutting and welding at on-base lay-down areas using industrial cutting torches, plasma cutters, or saws. Maintains fully operational fire extinguishers at all cutting sites. Requires compliance with DAF Form 592 Hot Work Permits. Delivers equipment reduced to sizes suitable for final disposal and transport.

Similar Contracts

Same NAICS industry code

Precision Machining of Valve Bodies and HousingsThis 8(a) sole source subcontract through the NASA Shared Services Center involves the precision machining and finishing of cast stainless steel valve components. The scope of work requires the production of seven 6 inch 150 lb flange valve main bodies and seven end housings, strictly adhering to drawings LM-7778 and LM-7776. Utilizing precision CNC milling and turning equipment, the contractor must maintain tight tolerances ranging from plus or minus 1/16 inch to plus or minus .010 inches. The final deliverable for this project consists of fourteen fully machined valve components.

NASA Shared Services Center

POSTED

about 8 hours ago

DEADLINE

Rough Machined Basecaps ProductionThis subcontract opportunity involves the production of seven rough machined basecaps for prime contractors supporting U.S. Army projects under the Department of Defense. The selected provider will be responsible for machining raw materials into basecaps using precision machining centers, CNC lathes, or milling machines to meet strict specified dimensions and tolerances. Interested parties must possess valid UEI and CAGE codes to be eligible for the award. The project falls under NAICS code 332710 and is managed by the W6QK Acc Wva agency. Responses are due by October 27, 2026, for performance located in zip code 12189.

POSTED

about 8 hours ago

DEADLINE

Rough Machined Tubes ProductionThis subcontract opportunity involves the production of 13 rough machined tubes for prime contractors supporting U.S. Army projects under the Department of Defense. The selected provider will be responsible for machining raw materials into tubes using CNC lathes, milling machines, or other specialized equipment to meet strict specified dimensions and tolerances. Interested parties must possess valid UEI and CAGE codes to be eligible. The project falls under NAICS code 332710 and is managed by the W6QK Acc Wva agency. Responses are due by October 27, 2026, for performance located in zip code 12189.

POSTED

about 8 hours ago

DEADLINE

Gear Rack, per Drawing # 8767202, Revision Y, for 155MM M284 Cannon, for the Watervliet Arsenal

Solicitation # W911PT27QA014

Solicitation W911PT27QA014 is a firm fixed price requirement for the procurement of 62 gear racks for the 155MM M284 Cannon, to be delivered to the Watervliet Arsenal in New York. The items must be manufactured according to Drawing 8767202, Revision Y, and National Stock Number 3020008611478. The procurement includes specific finish requirements, where two units must be provided without a protective finish and one unit must have a protective finish per drawing 7309999. This is a total small business set-aside under NAICS code 332710. The award will be granted to a single offeror based on the lowest evaluated offer that meets all material requirements, drawings, and responsibility criteria per FAR 9.104. Delivery is structured with first articles due 120 calendar days after the contract date, with production quantities following 90 days after first article approval or 150 days after the contract date. Strict marking and identification standards are required per MIL-STD-130 and MIL-STD-129, and all invoicing must be processed through the Wide Area WorkFlow system. Proposals must be submitted in full for the total quantity via the PIEE Solicitation Module to be considered responsive.

POSTED

about 8 hours ago

DEADLINE

Solicitation # RFP384239

Fermilab - DOE Contractor

POSTED

about 8 hours ago

DEADLINE

Subplate Assembly SupplierThis subcontract, issued by the Department of Defense under the DLA Weapons Support Nuclear Reactor Program, requires the procurement of 17 Subplate Assemblies, specifically NSN 1720010492476 / Part Piece Number MS20995C47. The supplier is responsible for manufacturing or sourcing these units using standard machining or fabrication equipment, with a strict prohibition on the use of additive manufacturing. The contractor must ensure full compliance with the Berry Amendment and the Buy American Act, and all radioactive materials must be marked and labeled according to MIL-STD-129. Performance for this contract will take place in New Cumberland, Pennsylvania, with a response deadline set for October 30, 2026.

DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

DEADLINE

Manufacturing of Housing Assembly (NSN 5670014720130)This subcontract involves the manufacture and supply of seven Housing Assemblies, identified by NSN 5670014720130, for the DLA Weapons Support ASC Supplier Oper OEM Division under the Department of Defense. The project requires the fabrication of these units using precision CNC milling and turning in strict accordance with the provided technical data package and OEM specifications. A critical quality requirement for this contract is the strict adherence to radioactive material limits, which must not exceed .002 micrograms per gram. The work is categorized under NAICS code 332710 and is to be performed in New Cumberland, Pennsylvania.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

Supply of Valve Seats (NSN 4820011464137)This subcontract involves the manufacture or procurement of four precision valve seat rings under NSN 4820011464137 to support prime contractors fulfilling Department of Defense requirements. The selected provider is responsible for ensuring all components meet strict technical specifications and adhering to RP001 DLA Packaging Requirements for Procurement regarding packaging and palletization. The contract is managed through the Department of Defense for delivery to DLA Distribution Puget Sound, with the place of performance located in Bremerton, Washington. The solicitation was posted on October 19, 2026, with a response deadline of October 30, 2026, falling under NAICS code 332710.

POSTED

DEADLINE

Supply of Stop Plate, Chain (NSN 4920016092654)This subcontract involves the manufacture or procurement of a Stop Plate, Chain under NSN 4920016092654 for the Department of Defense, specifically the DLA Weapons Support ASC Supplier Order OEM Division. The selected prime contractor must utilize precision machining or metal fabrication to ensure the items meet all technical specifications. Eligibility requires a valid CAGE code and a formal representation of the business size status. The final delivery of the physical components is required by May 24, 2027, with shipping handled under the First Destination Transportation program. Performance for this contract is centered in Tracy, California, and falls under NAICS code 332710.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

Manufacturer of Metal Tube Assembly (NSN 4710017062231)This subcontract involves the manufacture and supply of one Metal Tube Assembly (NSN 4710017062231) for prime contractors supporting the Department of Defense under the DLA Weapons Support Maritime Supply Chain. The scope of work includes fabricating metal tubing to exact government specifications, assembling the necessary components, and conducting thorough quality inspections. To execute this contract, the provider must possess specialized precision metal fabrication and tube bending equipment. Strict compliance and certification standards are required for this project, including ISO 9001:2015 certification, ITAR/EAR approval, and CMMC Level 2 or NIST SP 800-171 compliance. The opportunity was posted on October 19, 2026, with a response deadline of October 30, 2026. The project falls under NAICS code 332710 and culminates in the delivery of a single completed assembly.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

Supply of Spacers (NSN/Part 7018676318)This subcontract involves the manufacture or procurement of two specialized spacers, identified by part number 7018676318, to support prime contractors under the DLA Weapons Support ASC Supplier Oper OEM Division of the Department of Defense. The contractor is required to produce these units in strict accordance with the provided technical data package and must adhere to the DLA Master List of Technical and Quality Requirements. Performance of the contract includes rigorous quality assurance and packaging standards, specifically following ASTM D3951 and RP001 DLA Packaging Requirements for palletization. The work is associated with NAICS code 332710 and is to be performed in New Cumberland, Pennsylvania. The solicitation was posted on October 19, 2026, with a response deadline of October 27, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

Manufacture of Manifold, No. 2 (P/N 336D724G01)This subcontract involves the manufacture of high-precision Manifold, No. 2 (P/N 336D724G01) for the Department of Defense, specifically under the DLA Weapons Support ASC Supplier Oper AE and AF Div. The production must strictly adhere to Reference Drawing NR 97942 336D724, Revision A and Technical Data Package Rev A Gen 1. Utilizing precision CNC machining, the manufacturer is required to meet 1967 legacy specifications for Critical Application Items and certify all parts according to the established SOW quality assurance and sampling standards. The project falls under NAICS code 332710 and is designated for performance at Hill AFB. Interested parties should note the response deadline of October 27, 2026. The contract ensures that these critical components are produced to exact historical specifications to support prime contractors on essential defense projects.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

More opportunities from Department Of Defense → FA8571 Maintenance Contracting Afsc Pzim

Same awarding agency

Post-Removal Site RestorationThis subcontract for Post-Removal Site Restoration involves providing cleaning and restoration services for prime contractors on Air Force projects located at Robins AFB in Warner Robins, Georgia. The scope of work focuses on the Building 140 work area and various on-base cutting and lay-down sites, utilizing industrial cleaning equipment and debris removal tools to return all areas to their pre-project conditions. Final acceptance of the work is contingent upon approval from the Government Representative. The opportunity is managed under the Department of Defense through the Maintenance Contracting Afsc Pzim agency. Interested parties should note that the response deadline is December 10, 2026, and the project is categorized under NAICS code 561720.

Janitorial Services

POSTED

about 8 hours ago

DEADLINE

in about 2 months

Industrial Equipment Disposal and HaulingThe Industrial Equipment Disposal and Hauling subcontract involves the removal and transport of decommissioned fluid cell press materials for prime contractors on Air Force projects located at Robins AFB in Warner Robins. The selected provider will be responsible for hauling dismantled press components from the base to designated disposal or recycling facilities utilizing heavy-haul trailers, roll-off containers, and flatbed trucks. To ensure operational compliance, the contractor must adhere to all DOT regulations and provide formal certifications for scrap or legal disposal. The scope of work concludes with the final removal of all specified materials from the installation and the submission of official proof of disposal. This opportunity is managed under the Department of Defense through the Maintenance Contracting AFSC PZIM.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 8 hours ago

DEADLINE

in about 2 months

Industrial Rigging and Machinery RemovalThis subcontract for Industrial Rigging and Machinery Removal involves the decommissioning and removal of a Quintus ABB QFC fluid cell press at Robins Air Force Base in Warner Robins. The selected contractor will support prime contractors on Air Force projects by rigging, lifting, and transporting heavy industrial components to designated loading or lay-down areas. Strict operational requirements include ensuring that floor loading never exceeds 350 PSI through the use of load-spreading materials, heavy-duty rigging gear, and industrial lifts. Execution of the project requires strict adherence to a Technical Removal Plan and the provision of certified rigging personnel. The scope of work is complete once the press is successfully removed from its installation point and delivered to the specified location. This opportunity is managed under the Department of Defense via the Maintenance Contracting AFSC PZIM agency, with a response deadline of December 10, 2026.

All Other Specialty Trade Contractors

POSTED

about 8 hours ago

DEADLINE

in about 2 months

Supplier of SPX 160LCDBCM Military 160KV Portable X-Ray UnitsThis subcontract involves the supply of one military-grade portable X-ray unit, specifically Part Number 3-000-0723-1 (SPX 160LCDBCM Military 160KV), to prime contractors supporting Department of the Air Force procurement projects. The contract is managed under the Department of Defense through the Maintenance Contracting AFSC PZIM agency, with the place of performance located in Warner Robins, Georgia. A critical requirement of this agreement is strict adherence to Department of Defense Unique Item Identification standards for all items valued over 5,000 dollars. Additionally, the supplier must provide comprehensive documentation for all embedded subassemblies to ensure full regulatory compliance. The solicitation was posted on October 20, 2026, with a response deadline of October 27, 2026.

Medical, Dental, and Hospital Equipment and Supplies Merchant Wholesalers

POSTED

about 8 hours ago

DEADLINE

Supplier of SPX 160ACDBCM Military 160KV Portable X-Ray UnitsThis subcontract involves the supply of three military-grade SPX 160ACDBCM Military 160KV Portable X-Ray Units, identified by part number 3-000-0727-1, to prime contractors supporting Department of the Air Force procurement projects. Managed by the Department of Defense under the Maintenance Contracting AFSC PZIM agency, the performance of this contract is centered in Warner Robins, Georgia. The agreement mandates strict adherence to Department of Defense Unique Item Identification requirements for all items valued over 5,000 dollars and requires the provision of detailed documentation for all embedded subassemblies. The procurement falls under NAICS code 423450, with a response deadline established for October 27, 2026.

Medical, Dental, and Hospital Equipment and Supplies Merchant Wholesalers

POSTED

about 8 hours ago

DEADLINE

Site Visit - Removal of Old Fluid Cell

Solicitation # 82247

The Maintenance Support Group at Robins Air Force Base, Georgia, requires a contractor to provide all labor, equipment, materials, and transportation to decommission, remove, and dispose of one Quintus ABB QFC 1.6 x 4-1400 fluid cell press located in building 140. The scope of work includes dismantling and rigging heavy components, such as a 148,000 lb unwound main cylinder and an 86,000 lb lower filler piece, relocating them to a designated on-base cutting site, reducing the materials to recyclable sizes, and hauling all scrap and debris off-base. The contractor is also responsible for restoring the work area and any cutting sites to their original pre-project conditions, ensuring they are free of industrial waste and grease. A critical requirement is the submission of a Draft Technical Removal Plan within 14 calendar days of the award, which must be formally approved by the Contracting Officer before any physical work begins. Operational constraints include a strict floor loading limit of 350 PSI on concrete floors and the requirement to secure daily DAF Form 592 hot work permits for any on-base cutting activities. Additionally, the contractor must maintain operational fire extinguishers at all cutting sites. This sources-sought opportunity, solicitation number 82247, includes a site visit scheduled for December 14, 2026, requiring visitors to provide identification and vehicle documentation at the Robins AFB Visitor's Center.

Solid Waste Collection

POSTED

about 8 hours ago

DEADLINE

in about 2 months

NDI Portable X-Ray Kits

Solicitation # FA857127Q0009

Solicitation FA857127Q0009 is a Firm Fixed Price request for quote issued by the Department of the Air Force for the 402d Aircraft Maintenance Group at Robins Air Force Base, Georgia. Conducted under Simplified Acquisition Procedures and designated as a HUBZone Small Business set-aside, this requirement is restricted to the Brand Name OEM or Authorized Resellers. The contractor is required to provide all necessary tools, materials, and transportation to deliver four portable x-ray units, consisting of three SPX 160ACDBCM and one SPX 160LCDBCM unit, along with four corresponding laser pointers. All items must be delivered FOB Destination within 280 days after the contract award. The contract mandates strict adherence to military marking and identification standards, specifically MIL-STD-130 and MIL-STD-129, requiring Unique Item Identifiers for items with a unit acquisition cost of $5,000 or more. Extensive security and compliance protocols are in effect, including NISPOM, OPSEC, and CMMC requirements, as well as the safeguarding of covered defense information per DFARS 252.204-7012. Invoicing and payment must be processed electronically through the Wide Area WorkFlow system. Offerors must submit their quotes in English and U.S. currency, providing CMMC unique identifiers for any systems processing federal contract information.

Other Electronic Component Manufacturing

POSTED

about 8 hours ago

DEADLINE

Specialized Laboratory Equipment TransportThis subcontract involves the specialized transport of sensitive laboratory equipment for prime contractors supporting Air Force laboratory projects at Robins Air Force Base. The service provider is responsible for freight transport from the manufacturer to the Maintenance Support Group at WR-ALC, ensuring that delivery is strictly coordinated with the prime contractor to occur on the same day as installation. To maintain equipment integrity, the contractor must utilize climate-controlled or shock-absorbent transport as specified by the original equipment manufacturer. This requirement is managed under NAICS code 484220 for the Department of Defense, specifically through the Maintenance Contracting AFSC PZIM, with performance taking place in Warner Robins.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

Environmental and Energy Management System TrainingThis subcontract, titled Environmental and Energy Management System Training, involves providing specialized instruction to government personnel on the operation and maintenance of digestion systems for Air Force laboratory projects. The contractor is responsible for delivering training sessions and materials utilizing the installed Ultrawave 3 ECR system, ensuring all instruction aligns with established Environmental Management System and Energy Management standards. Key deliverables include the completion of staff training and the submission of Status Reports A001 and A002. Managed by the Department of Defense under the Maintenance Contracting Afsc Pzim agency, the work will be performed in Warner Robins. The opportunity is categorized under NAICS code 611430, with a response deadline set for October 26, 2026.

Professional and Management Development Training

POSTED

DEADLINE

Microwave Digestion System Installation and CommissioningThis subcontract for Microwave Digestion System Installation and Commissioning involves the physical installation and technical setup of systems for prime contractors at Air Force laboratories located at Robins AFB in Warner Robins. The scope of work includes coordinating same-day delivery and installation, performing full system setup, and verifying that all high-pressure and high-temperature capabilities are functioning correctly to deliver a fully operational system. The project is managed under the Department of Defense through the Maintenance Contracting AFSC PZIM. To be eligible, contractors must maintain CMMC Level 1 certification and provide a comprehensive Contractor Safety Plan. Interested parties must submit their responses by October 26, 2026.

Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

DEADLINE

Ultrawave 3 ECR Digestion System SupplierThis subcontract involves the procurement and delivery of one Ultrawave 3 ECR Digestion System, a high pressure and high temperature microwave digestion system featuring a single reaction chamber or pressurized digestion cavity. The equipment is intended for use by prime contractors supporting Air Force laboratory projects and must be delivered as a fully functional system FOB Destination to Robins Air Force Base in Warner Robins. Managed by the Department of Defense under the Maintenance Contracting AFSC PZIM, the contract requires strict adherence to Item Unique Identification marking standards. The opportunity is categorized under NAICS code 423490, with a response deadline set for October 26, 2026.

Other Professional Equipment and Supplies Merchant Wholesalers

POSTED

DEADLINE

HIGH PRESSURE/ TEMP MICROWAVE DIGESTION SYSTEM

Solicitation # FA857127Q0006

Solicitation FA857127Q0006 is a Request for Quote issued by the Department of Defense for the procurement of a High Pressure, High Temperature Microwave Digestion System, specifically an Ultrawave 3 ECR Digestion System with a Single Reaction Chamber or Pressurized Digestion Cavity classification. The contract includes the provision of all necessary materials, equipment, travel, labor, installation, and training for the Maintenance Support Group at the Warner Robins Air Logistics Complex, Robins Air Force Base, Georgia. This is a firm-fixed-price effort set aside for Economically Disadvantaged Women-Owned Small Businesses. The government will award the contract based on the Lowest Price Technically Acceptable (LPTA) basis, evaluating quotes on technical acceptability via a pass/fail basis, price fairness, and past performance. The successful contractor must coordinate delivery and installation within five business days of award, with all work completed within 90 days. Key requirements include CMMC Level 1 certification, the submission of a Contractor's Safety Plan, and compliance with Item Unique Identification (IUID) marking. Invoicing and payment must be processed electronically through the Wide Area WorkFlow system. Quotes are due by October 26, 2026.

Analytical Laboratory Instrument Manufacturing

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS