Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Industrial Motor Assembly and Testing

Active

Federal

Response Deadline08/07/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract involves the final assembly of industrial motor units with a focus on integrating the rotor, electrical winding, and housing components, followed by rigorous performance validation through load testing, RPM verification, and thermal analysis to ensure operational reliability. All assembly steps must meet precise alignment standards and comply with defined quality benchmarks to guarantee consistent output under operational conditions. The work is to be performed at a specified location in San Diego, California, with a strict submission deadline of August 7, 2026, and the solicitation was posted on August 4, 2026, under the NAICS code 335312 for electric motor and generator manufacturing. This is a subcontract opportunity issued by the Department of Defense through the Maritime Supply Chain organization, targeting qualified vendors capable of delivering technically complex motor assemblies with validated performance metrics.

General Info

Final assembly and validation of industrial motors in San Diego by August 7, 2026, for Department of Defense.

Agency

Department Of Defense → MARITIME SUPPLY CHAINView Agency

NAICS

335312 - Motor and Generator ManufacturingView NAICS

Place of Performance

SAN DIEGO, CA, 92136-3581, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 4

subcontract

Response DeadlineAug 7

Submission deadline

Response Deadline

08/07/2026, 05:00:00 PM UTCin 1 day

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → MARITIME SUPPLY CHAIN

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → MARITIME SUPPLY CHAIN

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Final assembly of motor units incorporating the rotor, including electrical winding, housing, alignment, and performance validation through load, RPM, and thermal testing.

Similar Contracts

Same NAICS industry code

PANEL,POWER DISTRIB

Solicitation # N0010426QND94

This contract involves the repair and quality assurance of the PANEL,POWER DISTRIB under emergency acquisition flexibilities, with a firm-fixed-price structure and a mandatory 180-day repair turn-around time (RTAT). Contractors must submit detailed quotes including teardown and evaluation costs, estimated new part pricing, and full repair cost breakdowns, with all repairs requiring final government inspection and acceptance within the stipulated RTAT. Failure to meet RTAT triggers per-unit price reductions and may result in termination for default. The work must adhere strictly to specified military standards including MIL-STD-130 for marking, MIL-STD-2073 for packaging, and the Defense Priorities and Allocations System (DPAS) rating, with no metallic mercury allowed unless written approval is granted, along with strict contamination controls and warning plates for approved exceptions. All repairs must be performed in line with approved technical documentation tied to specific CAGE codes and reference numbers, and any design, material, or part number changes require prior written approval from the contracting officer under specified Code classification systems. The contractor is fully responsible for quality assurance, record retention for 365 days post-delivery, and subcontractor compliance, including certification of authorized distributor status. Cybersecurity maturity thresholds apply, along with mandatory compliance with small business subcontracting, veteran and disability equity requirements, and Navy-specific workflow systems. Delivery to the Mechanicsburg, PA location is required, and all documentation must reflect NOFORN and distribution statement codes as mandated. Quotes must explicitly note any deviations from solicitation terms, and the award will be bilateral, contingent on written contractor acceptance following submission.

Navsup Weapon Systems Support Mech

POSTED

about 13 hours ago

DEADLINE

Cummins C70D2RE mobile, trailer mounted Generators

Solicitation # W911S226U3920

The U.S. Army Test and Evaluation Command at White Sands Missile Range is seeking to procure three Cummins C70D2RE mobile, trailer-mounted generators to ensure uninterrupted mission support services across the test range. This solicitation is a brand-name requirement specifically for the Cummins C70D2RE model, and any proposal offering an equivalent product must include a fully detailed specification sheet demonstrating equivalency. The contract is a small business set-aside under NAICS code 335312, with a strict 30-day delivery requirement from award. The solicitation, identified as W911S226U3920, was posted on August 5, 2026, and responses are due by August 7, 2026. The contracting office is headquartered at Fort Drum, New York, with the place of performance located at the White Sands Missile Range in New Mexico. All inquiries and communications should be directed to Matthew Gaskins at the provided military email and phone number.

W6QM Micc-Ft Drum

POSTED

about 13 hours ago

DEADLINE

61--PANEL,POWER DISTRIB

Solicitation # SPRMM126RGE87

The Government is seeking a single source for the procurement of 25 units of Panel, Power Distrib, identified by NSN 7G-6110-016007004, under a non-competitive contract authority authorized by FAR 6.302-1, due to the unique and proprietary nature of the part. The Government does not own the data or intellectual property rights required to procure or repair this item from alternative sources, and it has been determined that acquiring such rights or reverse engineering the component is uneconomical. Delivery will be made FOB origin, though no detailed delivery schedule, performance period, or place of performance is specified. The solicitation is structured as a presolicitation notice, with a response deadline of September 4, 2026, and interested vendors may submit capability statements within 45 days of publication, or 30 days if an existing Basic Ordering Agreement applies. Market research confirms the Government will not use commercial item acquisition policies under FAR Part 12, though offerors may still indicate if they can satisfy the requirement with a commercial item within 15 days. Technical documentation such as drawings, patterns, or deviation lists is not available through the DoD Single Stock Point or ASSIST-Online, and access to referenced military specifications and standards is limited to publicly available documents via DAPS in Philadelphia. No evaluation factors, inspection criteria, packaging requirements, or contract clauses are included in the notice, as this is a market survey and not a formal solicitation. The contracting office is located in Mechanicsburg, Pennsylvania, and primary point of contact is Brendan T. Heasley, with inquiries directed via email or phone. The NAICS code 335313 indicates the requirement falls under Electrical Equipment and Wiring Installation Manufacturing, and while the estimated contract value is not provided, the effort is non-competitive and based solely on the current lack of viable alternatives.

SPRMM1 DLA Mechanicsburg

POSTED

about 13 hours ago

DEADLINE

Supply of Electrical Contacts (Commercial Off-The-Shelf)The contract is for the supply of commercial off-the-shelf electrical contacts that meet original equipment manufacturer specifications for AMPHENOL and Boeing part numbers, ensuring full compliance with technical and performance requirements. The work includes quality assurance protocols, proper packaging, and timely delivery in accordance with Defense Logistics Agency standards. This subcontract is designated as a Total Small Business Set-Aside under the Small Business Administration guidelines, specifically targeting small businesses as defined by FAR 19.5, with the NAICS code 335312 indicating classification within the Electrical Equipment and Component Manufacturing sector. The solicitation was posted on August 4, 2026, with responses due by August 19, 2026, and is administered by the Maritime Supply Chain under the Department of Defense, reflecting the critical nature of these components in defense and aerospace applications.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Precision Motor Rotor ManufacturingThe contract requires the manufacture of a precision rotor component for industrial motors, strictly aligned with military and federal specifications. The scope encompasses all stages of production including machining and dynamic balancing, with full compliance to detailed technical drawings provided by the government. The component must meet exacting standards for performance, durability, and dimensional accuracy to ensure operational reliability in demanding environments. All work must be executed in accordance with established defense manufacturing protocols and quality assurance procedures. This is a subcontract opportunity issued under the NAICS code 335312 for electric motor and generator manufacturing, with the place of performance located in San Diego, California, at the address 92136-3581. The solicitation was posted on August 4, 2026, and responses are due by August 7, 2026. The contracting organization is the Department of Defense, operating under the MARITIME SUPPLY CHAIN, and the procurement is accessed via the DIBBS platform under the reference number SPE7M126T6008. There is no set aside designation, and the contract is open to qualified subcontractors capable of meeting the technical and regulatory demands of defense-grade rotor production.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Electrical Connector Cover SupplyOne unit of an electrical connector cover with National Stock Number 5935014668138 is being procured for integration into defense electrical systems, with strict adherence to military specifications and official packaging standards required. The procurement is structured as a subcontract under the NAICS code 335312 and is managed by the Maritime Supply Chain ESOC Buys division within the Department of Defense. The solicitation was posted on August 4, 2026, with responses due by August 17, 2026. The item must be delivered to Fort Bliss, Texas, with a ZIP code of 79918-0000, and all components must meet the technical and quality benchmarks mandated for use in military applications. The contract is accessible via the DIBBS platform for qualified subcontractors seeking to respond.

MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

Electric AC Motor Supply

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Power Supply Manufacturing and SupplyThe contract calls for the manufacture and delivery of four military-spec power supply units identified by part number LV28DE0.75 and national stock number 6130013479392, all of which must fully comply with MIL-STD specifications, including hazardous materials labeling and packaging standards. The work is being procured as a subcontract under a Total Small Business Set-Aside, restricted exclusively to small businesses per FAR 19.5 guidelines, and falls under the NAICS code 335312 for electrical装备制造. The offering is issued by the Department of Defense through its DDSP NEW CUMBERLAND FACILITY, with performance required at a designated location in New Cumberland, Pennsylvania, zip code 17070-5002. Bids must be submitted by the response deadline of August 17, 2026, with the solicitation originally posted on August 4, 2026, and all proposals must be submitted via the DIBBS portal using the provided UI link.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Solicitation # SPE7L7-26-T-4564

The contract is for the procurement of five power supply units identified by NSN 6130-01-208-3442 under solicitation SPE7L7-26-T-4564, with a total small business set-aside designation and a NAICS code of 335312. Delivery is required within 154 days of award, and responses must be submitted by the deadline of August 17, 2026. The supply must comply with all applicable DLA packaging, technical, and quality requirements listed in the DLA Master List of Technical and Quality Requirements, with the revision in effect on the solicitation issue date controlling for this simplified acquisition. Mercury or mercury-containing compounds are strictly prohibited from intentional addition or direct contact with the hardware, except for approved functional uses such as batteries, fluorescent lights, sensors, controls, weapon systems, or chemical reagents specified by NAVSEA; portable fluorescent lamps and instruments containing mercury must be shockproof and include a secondary containment boundary per NAVSEA 5100-003D. The alternate offeror must supply a complete data package, including full technical details for both the primary and alternate parts, as no data is currently available. The contract is managed by the Department of Defense through the DDSP New Cumberland facility, with Kurt Becka listed as the primary point of contact and performance to be delivered to a site in New Cumberland, Pennsylvania, with a ZIP code of 17070-5002.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

CONTACTOR, MAGNETIC

Solicitation # SPE7M1-26-T-248V

The contract is for the procurement of one magnetic contactor, identified by NSN 6110016827290 and part number MX52CD, under solicitation SPE7M1-26-T-248V, with a required delivery date of August 4, 2026, and a 10-day delivery window after order placement. The item must be delivered FOB origin, inspected and accepted at the destination, which is the U.S. Army SSA W58MKR facility in Zaczernie, Poland. Packaging must strictly comply with MIL-STD-2073-1E, including preservation method 41 (clng/dry), unit container D3, intermediate container E5, and pack code U, while palletization adheres to DLA’s RP001 requirements. Marking must follow MIL-STD-129 with no special marking required, and all shipments must include proper barcoding and hazardous material labeling in accordance with 29 CFR 1910.1200, excluding mercury unless for approved exceptions like batteries, fluorescent lamps, or weapon systems, which must include secondary containment and meet NAVSEA 5100-003D standards. The contract value is estimated at $214.00, though pricing data for CLIN 0001 is missing in the provided details. Invoicing must be submitted via Wide Area WorkFlow, with no Fast Pay authority indicated, and payment processing will be handled by the local DoDAAC as specified in Block 6 of DD Form 1155. The contract incorporates a suite of FAR and DFARS clauses addressing equal opportunity, human trafficking, employment eligibility, sustainable products, hazardous material identification, shipping by sea, subcontractor reporting, safety notifications, whistleblower rights, information disclosure, and payment protections for small business subcontractors. Additionally, the contractor is subject to NIST SP 800-171 cyber assessment requirements and must comply with DoD personnel compensation restrictions. Offerors must hold an active Unique Entity ID and CAGE code and may represent as a small business under applicable socioeconomic categories but no specific size certification or set-aside designation is confirmed. The contract type is unspecified, but modifications require pricing per DFARS 252.243-7001 and may trigger recertification of small business status if options are exercised beyond five years. All provisions are governed

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

MOTOR, ALTERNATING CURR

Solicitation # SPE7M1-26-U-4875

The contract involves the procurement of 32 units of an alternating current motor with NSN 6105-00-897-5453 under an indefinite-delivery contract below the simplified acquisition threshold, with a maximum value of $350,000 and a guaranteed minimum order of four units. Delivery is required 104 days after award, with FOB Destination terms and performance confined to the continental United States. Packaging and marking must comply with DLA’s RP001 packaging requirements and MIL-STD-129 for labeling, barcoding, and shipment identification, with ASTM D3951 standards applicable unless superseded by the DLA Master List of Technical and Quality Requirements, which governs all technical and quality specifications referenced by R or I numbers. Hazardous materials must be labeled under 29 CFR 1910.1200 unless regulated under other federal acts such as FIFRA or TSCA, and specific hazard warning labels as per 252.223-7001 must be submitted prior to award along with corresponding Material Safety Data Sheets. The inspection and acceptance point is at the destination, with the Government retaining final authority, and the contractor must comply with FAR 52.246-2 for inspection of supplies under a fixed-price arrangement. Electronic invoicing is mandatory through Wide Area WorkFlow (WAWF), using designated document types for fixed-price items, and payment processing follows DoDAAC routing procedures not fully detailed in the solicitation. Contractor compliance with cybersecurity and data safeguarding is required per NIST SP 800-171 and 252.204-7012, including reporting of cyber incidents and protection of covered defense information. Offerors must provide a Unique Entity Identifier (UEI) and disclose socioeconomic status, including small business, HUBZone, SDVOSB, WOSB, or EDWOSB certifications as applicable. Affirmative disclosures regarding covered defense telecommunications equipment or services require additional CAGE code reporting. Proposals must be submitted electronically via the DLA Internet Bid Board System by the deadline of August 19, 2026, and must include complete technical data packages for both approved and alternate parts. Compliance with labor and ethical requirements is mandated through clauses addressing equal opportunity, combating human trafficking, employment eligibility verification, whistleblower rights, restrictions on mandatory arbitration, and prohibition of procurement from Chinese military companies

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

MOTOR, ALTERNATING C

Solicitation # SPE7M1-26-T-249J

This contract pertains to the procurement of two alternating current motors, identified by NSN 6105-01-211-7168 and part numbers 500826-2307 and 5ZY-872256, under solicitation SPE7M1-26-T-249J. The delivery is required within 344 days from the contract award, with shipment to be made FOB origin and inspection occurring at the destination. The items must be packaged in strict compliance with MIL-STD-2073-1E and marked according to MIL-STD-129, with no special marking required. Packaging must adhere to DLA’s procurement standards, including the use of specific containment methods, materials, and unit containers, and all units must be palletized per DLA requirements. The motors are designated as critical application items and must not contain mercury or mercury-containing compounds, except in permitted exceptions such as batteries, fluorescent lamps, sensors, or weapon systems specified by NAVSEA, with any such exceptions requiring shockproof design and a secondary containment barrier in accordance with NAVSEA 5100-003D. The contract enforces all technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, with revisions controlled by the solicitation issue date for simplified acquisitions or the RFP issue date for larger acquisitions, unless a later amendment supersedes it. The unit of issue is each, with a total quantity of two units at a unit price of $2.00, resulting in a total contract value of $4.00. Delivery is directed to the DLA Distribution San Joaquin facility in Tracy, California, and transportation must follow the DLA procedural notes C19 and C20. The solicitation was posted on August 4, 2026, with responses due by August 17, 2026, under NAICS code 335312 for electric motor manufacturing. The primary point of contact is Michael Reese from the Department of Defense, Maritime Supply Chain, and the contract is for a federal procurement with no set-aside designation.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

More opportunities from Department Of Defense → MARITIME SUPPLY CHAIN

Same awarding agency

Government-Arranged Transportation (First Destination Transportation - FDT)The contractor is tasked with preparing and packaging an impeller for government-arranged sea transport under the Department of Defense’s First Destination Transportation program, ensuring full compliance with military logistics standards. This work requires precise handling and packaging procedures tailored to secure military transport requirements, with the impeller destined for delivery via sea under the supervision of the Maritime Supply Chain branch. The contract is structured as a subcontract under the NAICS code 488999, indicating it pertains to other support activities for transportation, and all activities must align with the stringent protocols enforced by the Department of Defense for defense-related cargo. The solicitation was posted on August 5, 2026, and responses are due by August 12, 2026, with no specific set-aside classification indicated. Although no organizational address or point of contact details are provided, the work must be performed in accordance with the specifications outlined by the DLA’s FDT program, and the contract is accessible via the DIBBS platform. The contractor must ensure all packaging, labeling, documentation, and readiness for sea transport meet the operational and security demands of military logistics, with no flexibility in adherence to established standards.

All Other Support Activities for Transportation

POSTED

about 8 hours ago

DEADLINE

Domestic Supply Chain Compliance and ReportingAll materials used in production must be sourced exclusively from U.S. or designated foreign countries to ensure compliance with FAR and DFARS regulations, with full documentation maintained to verify origin and traceability throughout the supply chain. The subcontract requires strict adherence to domestic sourcing requirements and demands rigorous recordkeeping to demonstrate adherence to federal procurement standards. This contract is issued by the Department of Defense through the Maritime Supply Chain office and is open for response until August 12, 2026, with materials classified under NAICS code 423840 related to wholesale trade of miscellaneous durable goods. Failure to provide accurate documentation or source non-compliant materials will result in nonconformance and potential contract termination.

Industrial Supplies Merchant Wholesalers

POSTED

about 8 hours ago

DEADLINE

Precision Machining of Centrifugal Pump ImpellerThe contract calls for the manufacture of two precision centrifugal pump impellers designed for critical applications requiring strict compliance with military or industrial specifications. This subcontract is part of the Department of Defense’s Maritime Supply Chain initiative and is classified under NAICS code 332112, indicating it falls within the precision machining and manufacturing sector for pumps and pumping equipment. The impellers must meet exacting quality and performance standards to ensure reliable operation in demanding environments, where failure is not an option. All work must be completed to stringent technical requirements without deviation, emphasizing dimensional accuracy, material integrity, and surface finish. The solicitation was posted on August 5, 2026, with a firm deadline for responses on August 12, 2026, leaving a limited window for qualified subcontractors to submit proposals. The place of performance and point of contact details are not specified, suggesting the contractor may have flexibility in location but must still meet all delivery and certification benchmarks. The contract is accessible through the DIBBS platform, and interested parties must ensure full alignment with the technical and compliance demands outlined in the full RFQ to be considered for award. There is no set-aside designation, meaning any eligible supplier may bid regardless of business size or ownership characteristics.

Nonferrous Forging

POSTED

about 8 hours ago

DEADLINE

Data retrieval failure — no sub-opportunities identifiableData retrieval for the prime contract has failed, preventing identification of any subcontract opportunities linked to this solicitation. The posting date is August 5, 2026, with a response deadline of August 17, 2026, and the opportunity is categorized as a subcontract under the Maritime Supply Chain agency within the Department of Defense. The place of performance is listed as Robins AFB with a zip code of 31098-1887, though no city, state, or country details are provided for the office address or point of contact. No solicitation number, NAICS code, set-aside type, or organization type is available, and the official link to the solicitation is accessible via the DIBBS platform.

POSTED

about 8 hours ago

DEADLINE

CIRCUIT CARD ASSEMB

Solicitation # SPE7M1-26-T-250H

The contract pertains to the procurement of 30 circuit card assemblies identified by NSN 5998-00-111-4498 and part number 65901-02973-044, with a unit price of $30.00 and a total value of $900.00. Delivery is required within 20 days under FOB origin terms, with no variance allowed in quantity, and acceptance occurs at the origin point. The items must be packaged in compliance with MIL-STD-2073-1E, marked according to MIL-STD-129, and contain no special marking codes. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, and cybersecurity compliance is mandated at CMMC Level 2 via self-assessment, with Covered Defense Information rules applied. The goods are destined for the Government of Israel, Ministry of Defense, with a specified freight forwarder and government use identifiers included. The solicitation number is SPE7M1-26-T-250H, issued by the Department of Defense’s Maritime Supply Chain, with a response deadline of August 17, 2026, and a required delivery date of August 7, 2026. The contract falls under NAICS code 334418 and is administered through DLA’s eProcurement system, with all unit of issue conversions defined by official DoD standards.

Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

about 8 hours ago

DEADLINE

ALARM, GAS, AUTOMATIC

Solicitation # SPE7M1-26-T-250L

The contract pertains to the procurement of 307 units of an automatic gas alarm with NSN 6665-01-499-7234 under solicitation SPE7M1-26-T-250L, issued by the Department of Defense’s Maritime Supply Chain division. The solicitation is a total small business set-aside, with responses due by August 17, 2026, and requires delivery within 13 days after award. All supplies must comply with DLA packaging requirements and technical quality standards referenced in the DLA Master List of Technical and Quality Requirements, where revisions in effect at the time of solicitation issue or award govern compliance. Mercury or mercury-containing compounds are strictly prohibited from intentional addition or direct contact with the supplied hardware except under specific exemptions for functional uses such as batteries, fluorescent lights, weapons systems, or authorized instruments, with portable devices containing mercury required to be shockproof and feature a secondary containment boundary in accordance with NAVSEA 5100-003D. The offeror must submit a complete data package covering both the approved and alternate parts, as no existing data is available. The place of performance is Tracy, California, 95304-5000, and the primary point of contact is Misty Slone, reachable via email and phone provided.

Other Measuring and Controlling Device Manufacturing

POSTED

about 8 hours ago

DEADLINE

SEAL ASSEMBLY, SHAFT, SP

Solicitation # SPE7M1-26-Q-1335

The seal assembly is a shaft-mounted, spring-loaded mechanical seal requiring pure carbon material proprietary to Morgan Advanced Materials, specifically Cage 80894, as defined by Drawing 5773203, Sheet 26. Manufacturing must comply with NAVSEA 5773203, Piece No. 10A, and Drawing Sheets 26 and 30, with three critical deviations: the outer shell must follow Ram Seal Drawing 01-250159 Rev B, the drive band must adhere to Ram Seal Drawing 11-250159 Rev B, and the spring retainer must conform to Ram Seal Drawing 12-250259 Rev A. Each unit must be delivered with a complete installation kit containing specified O-rings identified by part numbers 5773203-1.6, 5773203-1.7.1, 5773203-12.6.4, 5773203-1.8.1, 5773203-1.9.1, 5773203-4.1, 5773203-10.11, 5773203-12.6.5, and a 2-inch steel spanner wrench with a .250 inch pin per Fed Spec GGG-W-665 Type 2 Grade A. The contract mandates a Certificate of Quality Compliance for each manufacturing lot, prepared in accordance with the Supplemental Quality Assurance Provision, and requires electronic submission of each COQC via the iRAPT system. Product verification testing may be invoked at the government’s discretion under DLAD 52.246-9004, and all supplies must conform to DLA packaging, configuration management, and inspection requirements including RQ002, RQ009, and RD003. The NSN 4320-01-269-8849 is solicited under a total small business set-aside with a delivery deadline of 30 days ADO for 104 units, sourced through the Department of Defense’s Maritime Supply Chain under contract SPE7M1-26-Q-1335.

Air and Gas Compressor Manufacturing

POSTED

about 8 hours ago

DEADLINE

MODIFICATION KIT, EL

Solicitation # SPE7M1-26-T-250F

This contract specifies the procurement of a Modification Kit, EL, with NSN 6105-01-705-8310 and part number 377-53322-000, supplied by JOHNSON CONTROLS NAVY SYSTEMS, LLC. The delivery is for one unit, to be shipped FOB destination within 20 days of contract award, with no quantity variance allowed. All packaging and preservation must strictly comply with MIL-STD-2073-1E, Appendix D, for kits, and marking must adhere to MIL-STD-129. Packaging requirements as defined by DLA’s RP001 apply, including palletization and the use of specified preservation methods, wrapping, and cushioning materials. The item is designated as a Critical Application Item and may involve Covered Defense Information under RD003. Technical and quality requirements referenced via R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the revision in effect on the solicitation issue date controlling. The delivery destination is the USS CANBERRA LCS 30 at FPO AP 96694, and shipment logistics must follow DLAD Proc Note C19 for transportation and C20 for first destination delivery. The contract solicitation number is SPE7M1-26-T-250F, with a required delivery date of August 3, 2026, and procurement is managed under NAICS code 333618 by the Department of Defense’s Maritime Supply Chain.

Other Engine Equipment Manufacturing

POSTED

about 8 hours ago

DEADLINE

INDICATOR, CARBON MONOX

Solicitation # SPE7M1-26-T-250G

This contract specifies the procurement of a carbon monoxide indicator unit with part number BWC2-M25100 and NSN 6665200018480, with a quantity of five units to be delivered within 20 days to the USS ROBERT SMALLS CG 62. Delivery is FOB destination with zero variance allowed and inspection and acceptance occurring upon arrival. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, including specific storage and handling requirements such as dry climate control and prohibition of cushioning materials. All hazardous materials, including lithium batteries, must adhere to DLA packaging and shipping standards, with marking and documentation following strict DoD guidelines. The item is classified as a critical application product with a TYPE 2 shelf life of 12 months extendable, and no mercury or mercury-containing compounds may be intentionally added or come into direct contact with the supplied hardware except under approved exceptions for functional components like certain instruments or sensors as defined by NAVSEA. Suppliers are required to submit Safety Data Sheets (SDS) and Hazard Communication Standard (HCS) compliant labels in accordance with 29 C.F.R. 1910.1200, effective since June 1, 2015, replacing the previous Material Safety Data Sheet (MSDS) requirements. Employees must be trained on these updated standards, including proper classification, labeling, and handling procedures. The contract incorporates technical and quality requirements from the DLA Master List, and the unit of issue is defined by DoD standards. The solicitation number is SPE7M1-26-T-250G, with a required delivery date of August 3, 2026, and responses due by August 17, 2026. Transportation and shipment instructions reference DLA procedural notes C19 and C20, and the item is subject to federal acquisition regulations under the North American Industry Classification System code 334511.

Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

about 8 hours ago

DEADLINE

ALARM, GAS, AUTOMATIC

Solicitation # SPE7M1-26-T-250J

The contract is for the procurement of 185 units of an automatic gas alarm identified by NSN 6665-01-499-7234 under purchase request 7015538145, with a delivery requirement of 13 days after order placement. The solicitation number is SPE7M1-26-T-250J, issued by the Department of Defense’s Maritime Supply Chain through the Defense Logistics Agency, with a response deadline of August 17, 2026. The technical requirements referenced in this contract are governed by the DLA Master List of Technical and Quality Requirements, with revision control depending on the type of acquisition—simplified acquisitions follow the revision in effect on the solicitation issue or award date, while large acquisitions adhere to the revision in effect on the RFP issue date unless an amendment supersedes it. The contract explicitly prohibits the intentional addition of mercury or mercury-containing compounds to any supplied hardware or equipment, unless exempted for specific functional applications such as batteries, fluorescent lamps, instruments, sensors, weapon systems, or NAVSEA-specified chemical reagents. Portable fluorescent lamps and instruments containing mercury must be shockproof and include a secondary containment barrier in accordance with NAVSEA 5100-003D. Offerors must provide a complete data package covering both the approved and alternate parts, as no existing data is available for this item. The place of performance is Tracy, California, with Misty Slone listed as the primary point of contact.

Other Measuring and Controlling Device Manufacturing

POSTED

about 8 hours ago

DEADLINE

CONNECTOR, RECEPTACL

Solicitation # SPE7M1-26-U-5053

The contract solicitation SPE7M1-26-U-5053 seeks the procurement of an electrical connector, receptacle, identified by NSN 5935015240367 and part number 2583A-125, under an indefinite-delivery contract structure with an estimated annual quantity of 11 units and a maximum contract value of $350,000. Deliveries are required FOB Origin with a 57-day lead time following award, and goods will be inspected and accepted at the destination point. All supplies must comply with stringent DLA packaging and quality requirements, including adherence to MIL-STD-129 for labeling and marking, RP001 for palletization, and RA001 for technical specifications from the DLA Master List of Technical and Quality Requirements, which supersede commercial standards such as ASTM D3951. Hazardous materials, as defined by FED-STD-313, must be packaged under TQ requirement IP025 and labeled per OSHA’s Hazard Communication Standard, while non-hazardous items must meet commercial packaging standards unless overridden by DLA requirements. Physical identification of bare items is mandated under RQ017. The contract includes mandatory clauses related to employment equity, anti-trafficking, sustainable products, cybersecurity safeguards including NIST SP 800-171 and DFARS 252.204-7012, and prohibitions on covered defense telecommunications equipment. Payment will be processed exclusively via Wide Area WorkFlow using the Invoice and Receiving Report method, and all offers must be submitted electronically through the DIBBS portal by the August 20, 2026 deadline. The solicitation requires full compliance with Buy American provisions and mandates U.S.-flag vessels for ocean transportation unless waived. No unit price is listed in the CLIN, but the total estimated value is capped at $350,000, with award based on price and other factors, not as a strictly lowest price technically acceptable procurement. The contract is unilateral, allowing the Government to issue delivery orders under predetermined terms, and includes guaranteed minimum quantities. All representations and certifications by offerors remain unpopulated at the solicitation stage.

Electronic Connector Manufacturing

POSTED

about 8 hours ago

DEADLINE

HOUSING SECTION, LIQ

Solicitation # SPE7M1-26-T-250A

This contract pertains to the procurement of a housing section and pump under solicitation SPE7M1-26-T-250A, with a single unit of 1 EA identified by NSN 4320-01-511-0467 and part number 009-1107B08-347552A from Carver Pump Company. Delivery is required within 20 days FOB destination, with no variance allowed in quantity and inspection and acceptance occurring at the delivery point. All items must comply with DLA packaging requirements per MIL-STD-2073-1E and MIL-STD-129, including specific preservation methods, wrapping, and palletization standards. Mercury and mercury-containing compounds are strictly prohibited in or on the supplied hardware except for designated functional uses such as certain batteries, lighting, instruments, sensors, controls, weapon systems, and NAVSEA-specified reagents, with additional containment and shockproofing mandates for portable devices. Packaging must adhere to RP001 and special marking code 00-00 applies, with no unique identifiers beyond standard requirements. Shipment must be delivered to the FPO address for USS JOHN P MURTHA LPD 26 using the fastest traceable means, explicitly prohibiting parcel post, and must follow DLA procurement notes C19 and C20 for transportation routing. The supply is tied to Project LK5 TP 2 with a required delivery date of August 3, 2026, and is subject to federal procurement standards incorporating technical and quality requirements referenced from the DLA Master List. The contracting office is under the Department of Defense’s Maritime Supply Chain, with Michael Reese as the primary point of contact.

Fluid Power Pump and Motor Manufacturing

POSTED

about 8 hours ago

DEADLINE