Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Infrastructure & Energy Design Consultant

Active

Federal

Response Deadline11/13/2026, 08:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The Infrastructure and Energy Design Consultant subcontract involves providing specialized design services for supporting infrastructure and energy systems on secure USACE campus projects for the Department of Defense, specifically under W071 Endist Omaha. The scope of work focuses on the development of technology infrastructure, including communications centers and data centers, with a specific emphasis on backup power distribution and cooling systems to meet building campus requirements. Qualified consultants must hold a Professional Engineer registration and maintain a Top Secret security clearance to deliver the required infrastructure and energy design packages. This opportunity is categorized under NAICS code 541330, with a response deadline of November 13, 2026, and performance located in the 68102 zip code area.

General Info

TS-cleared PE providing energy and infrastructure design for USACE DoD projects by 2026.

Agency

Department Of Defense → W071 Endist Omaha

NAICS

541330 - Engineering Services

Place of Performance

NE, 68102

Set-Aside

NONE

Documents

This scope was carved out of W9128F27RA016.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

$150M UNR SCIF HEMP AE SERVICES MATOC

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 22

subcontract

Response DeadlineNov 13

Submission deadline

Response Deadline

11/13/2026, 08:00:00 PM UTCin 21 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → W071 Endist Omaha

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → W071 Endist Omaha

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs design for supporting infrastructure and energy systems for prime contractors on USACE secure campus projects. Designs technology infrastructure, including data centers and communications centers, and energy infrastructure for building campus requirements. Utilizes data center cooling and backup power distribution systems. Requires Professional Engineer (PE) registration and Top Secret clearance. Delivers infrastructure and energy design packages.

Similar Contracts

Same NAICS industry code

Pure Water Southern California Direct Potable Reuse Testing Facility

Solicitation # pure-water-southern-california-direct-potable-reuse-testing-facility

Kiewit Infrastructure West Co. is seeking proposals for the Pure Water Southern California Direct Potable Reuse Testing Facility project located in California. This solicitation is specifically set aside for small businesses, including SBA certified Veteran Owned, Service-Disabled Veteran Owned, and Women-Owned Small Businesses, falling under NAICS code 541330. The solicitation was posted on October 23, 2026, with a response deadline of November 3, 2026. Interested parties should coordinate with the primary point of contact, Sepideh Aria, to submit their responses by the specified date.

Kiewit Infrastructure West Co.

POSTED

about 6 hours ago

DEADLINE

Business Impact Analysis and Update Disaster Recovery Plan Services – Inland Empire Utilities Agency

Solicitation # business-impact-analysis-update-disaster-recovery-plan-services-inland-empire-utilities-agency

Aanko Technologies Inc. is soliciting certified Disadvantaged Business Enterprise and Small Business Enterprise sub-consultants and suppliers to provide professional services for the Inland Empire Utilities Agency in San Bernardino and Riverside Counties, California. The scope of work focuses on emergency management, business continuity planning, technical writing, data collection, and the updating of IT and disaster recovery plans. Relevant expertise should align with NAICS codes for administrative management, engineering services, computer systems design, and public relations. Interested parties must submit their responses by November 17, 2026. The primary point of contact for this opportunity is Liz Jordan-Wettstein. This solicitation specifically targets qualified DBE and SBE firms capable of supporting critical infrastructure resilience and technical documentation efforts within the state of California.

Aanko Technologies Inc.

POSTED

about 6 hours ago

DEADLINE

Geotechnical EngineeringThis subcontract opportunity involves providing specialized geotechnical engineering services for prime contractors working on projects for the City of Brookhaven Department of Public Works. The scope of work focuses on subsurface exploration, soil drilling, and comprehensive geotechnical analysis to support infrastructure development. The selected provider will be responsible for delivering detailed boring logs and geotechnical reports. The solicitation is categorized under NAICS code 541330 and was posted on October 23, 2026. Interested parties must submit their responses by the deadline of November 25, 2026. This engagement is specifically structured as a subcontract to support municipal projects within the state of Georgia.

City of Brookhaven

POSTED

about 9 hours ago

DEADLINE

in about 1 month

Value Engineering Study ServicesThis subcontract for Value Engineering Study Services supports prime contractors working on projects for the City of Brookhaven Department of Public Works in Georgia. The selected provider will conduct detailed value engineering studies to optimize project costs and performance by analyzing designs to identify cost-saving alternatives that maintain original quality and function. Key deliverables include comprehensive value engineering reports and detailed cost-benefit analyses. The opportunity was posted on October 23, 2026, with a response deadline of November 25, 2026. Classified under NAICS code 541330, the contract focuses on providing specialized engineering analysis to ensure fiscal efficiency and operational excellence across municipal public works initiatives.

City of Brookhaven

POSTED

about 9 hours ago

DEADLINE

in about 1 month

Bridge and Guardrail EngineeringThis subcontract for Bridge and Guardrail Engineering supports the City of Brookhaven Department of Public Works by providing specialized engineering analysis, design, and rehabilitation planning for off-system bridges and guardrails. The selected contractor will work under prime contractors to conduct detailed structural analyses and develop comprehensive design specifications for guardrails. Key deliverables for this engagement include structural analysis reports, rehabilitation plans, and technical design specifications. The project falls under NAICS code 541330, with a response deadline set for November 25, 2026.

City of Brookhaven

POSTED

about 9 hours ago

DEADLINE

in about 1 month

Minor Roadway and Connectivity DesignThe Minor Roadway and Connectivity Design subcontract supports the City of Brookhaven Department of Public Works by providing specialized design services for prime contractors. The scope of work focuses on minor intersections, connectivity enhancements, and multi-modal transportation, specifically encompassing roadway geometric design, ADA compliance, and the development of bicycle, sidewalk, and multi-use paths. The selected provider is responsible for producing essential technical deliverables, including comprehensive construction documents, traffic control and detour plans, geometric plans, and ADA compliance reports. This opportunity is categorized under NAICS code 541330, with a response deadline set for November 25, 2026.

City of Brookhaven

POSTED

about 9 hours ago

DEADLINE

in about 1 month

Stormwater and Drainage DesignThis subcontract opportunity involves providing specialized engineering design services for stormwater management and drainage systems to support prime contractors on projects for the City of Brookhaven Department of Public Works. The scope of work focuses on drainage infrastructure design, hydraulic analysis, and stormwater mitigation planning, with required deliverables including comprehensive engineering plans, hydraulic calculations, and detailed design reports. The project falls under NAICS code 541330 and is associated with the state of Georgia. Interested parties should note that the solicitation was posted on October 23, 2026, and the deadline for responses is November 25, 2026.

City of Brookhaven

POSTED

about 9 hours ago

DEADLINE

in about 1 month

RFQ 26-112 On-Call Professional Services

Solicitation # 26-112

The City of Brookhaven Public Works Department is soliciting proposals under RFQ 26-112 for on-call professional engineering services. The city intends to award multiple contracts across various categories, including stormwater and drainage design, minor roadway and connectivity design, off-system bridge and guardrail rehabilitation, value engineering studies, easement and right-of-way acquisition, survey and subsurface utility engineering, and geotechnical, environmental, and construction material testing services. All work will be executed through approved task orders specifying the scope and fees. Qualified offerors must submit a Statement of Qualifications by November 25, 2026, exclusively through the Bonfire Portal. Evaluation is based on a committee ranking of qualifications, and the city has explicitly stated that cost will not be the deciding factor for the award. However, a labor category-based hourly billable fee schedule must be submitted as a stand-alone file. Technical requirements include specific certifications for material testing, such as NICET Level II for soil, GDOT Level 1 for asphalt, and ACI or GDOT certification for concrete. The contract requires adherence to the City of Brookhaven Vendor Manual and Financial Management Policies. While bonds are not required for professional engineering services alone, performance and payment bonds may be mandated for task orders involving construction management or design-build services. Additionally, prime consultants are encouraged to utilize small, minority, and women-owned businesses. Submissions must include an executive summary, an organizational chart of key personnel, and signed affidavits regarding immigration compliance and non-collusion.

City of Brookhaven

POSTED

about 9 hours ago

DEADLINE

in about 1 month

Construction Phase Inspection & Quality AssuranceThis subcontract for Construction Phase Inspection and Quality Assurance involves providing on-site technical oversight and inspection services for roadway and signal installation projects within the City of Albany, Georgia. The selected provider will be responsible for verifying materials, processing construction phase revisions using specialized inspection software and field testing equipment, and delivering essential documentation including daily inspection reports, punch lists, and final project certifications. To ensure compliance and quality, the contract requires the deployment of GDOT certified inspectors and professional engineer oversight. Interested parties must submit their responses by November 23, 2026, in accordance with the solicitation guidelines for this engineering services project.

POSTED

about 15 hours ago

DEADLINE

in about 1 month

Traffic Engineering & Signal DesignThis subcontract opportunity for Traffic Engineering and Signal Design involves providing specialized traffic analysis and technical design services for prime contractors on roadway projects within the City of Albany, Georgia. The scope of work includes conducting signal timing and traffic impact studies according to GDOT criteria, as well as designing pedestrian facility upgrades. These tasks require the use of advanced traffic modeling and simulation software, specifically Synchro or Vissim, to produce detailed design drawings, signal timing plans, and comprehensive impact study reports. Qualified candidates must hold a Professional Engineer license in the state of Georgia. The solicitation was posted on October 22, 2026, with a response deadline of November 23, 2026. This project falls under NAICS code 541330 and is focused on enhancing the transportation infrastructure of the City of Albany.

POSTED

about 15 hours ago

DEADLINE

in about 1 month

27-034 ROADWAY ENGINEERING AND TRAFFIC SIGNAL DESIGN SERVICES

Solicitation # 27-034

The City of Albany, Georgia, is soliciting qualified professional engineering firms to provide roadway engineering and traffic signal design services for various citywide improvements. The scope of work includes the full project lifecycle, from concept development and preliminary engineering to final design and right-of-way acquisition. Specific technical requirements encompass sidewalk installation, intersection improvements, roundabout design, traffic calming devices, signal timing studies, and traffic impact studies per GDOT criteria. The selected consultant will also provide support services such as surveying, environmental studies, utility coordination, and construction phase inspection. Selection will be conducted in accordance with the Brooks Act, focusing on the most highly qualified firms based on a review of professional certifications, past performance on similar projects, proposed methodology, and management capability. Interested firms must submit one original labeled copy, one electronic PDF copy, and five hard copies by November 23, 2026, at 5:00 p.m. to the Procurement Division. Submissions must be clearly marked as a Sealed Submittal and include required certifications regarding non-collusion, drug-free workplaces, and federal debarment status. The contract anticipates using Engineers Joint Contract Documents Committee standards and requires the consultant to maintain comprehensive insurance, including general liability, professional liability, and product liability, each with limits of at least 1 million dollars. Additionally, firms must comply with the Georgia Security and Immigration Compliance Act and agree to the governing law and venue of Dougherty County, Georgia. The City strongly encourages participation from small businesses and Disadvantaged Business Enterprises.

POSTED

about 15 hours ago

DEADLINE

in about 1 month

Abatement Specification & Cost EstimatingThis subcontract, titled Abatement Specification and Cost Estimating, involves the development of technical specifications and cost estimates for hazardous material removal on University of Connecticut facility projects. The selected provider will be responsible for writing detailed abatement specifications and utilizing cost estimation software to determine preliminary disposal expenses for prime contractors. Key deliverables include formal technical specification documents and comprehensive cost estimate reports. Managed by DAS Procurement for the state of Connecticut, the contract requires the provider to hold professional certification in industrial hygiene or environmental remediation. The solicitation was posted on October 22, 2026, with a response deadline of November 19, 2026. The work falls under NAICS code 541330, focusing on specialized engineering and environmental services.

DAS Procurement

POSTED

about 16 hours ago

DEADLINE

More opportunities from Department Of Defense → W071 Endist Omaha

Same awarding agency

Structural/Building ContractorThis subcontract opportunity is for a structural and building contractor to support prime contractors on a US Army Corps of Engineers project managed by Endist Omaha. The scope of work involves the demolition of an existing POL Operation building and its foundation, followed by the construction of a new permanent POL operations building and the installation of a concrete generator pad in accordance with UFGS 13 34 19. The final deliverables include the completed building and generator pad located in Mather, zip code 95655. The project is designated as a total Small Business Set Aside under NAICS code 236220. Interested parties must submit their responses by the deadline of November 20, 2026. This Department of Defense initiative requires a contractor capable of executing specialized demolition and new construction tasks to meet federal specifications.

Commercial and Institutional Building Construction

POSTED

about 24 hours ago

DEADLINE

Electrical Design-Build ContractorThis small business set-aside subcontract involves providing electrical design-build services for prime contractors on US Army Corps of Engineers projects managed by Endist Omaha. The scope of work includes engineering design, the installation of conduits and conductors, and the relocation of generators. All work must be performed in strict accordance with NFPA 70 and UFC 3-460-01 standards to deliver a fully functional and tested electrical system. The project is located in Mather, zip code 95655, and falls under NAICS code 238210. Interested parties must submit their responses by November 20, 2026, at 8:00 PM. This opportunity is specifically designated as a total set-aside for small businesses under the Department of Defense.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

about 24 hours ago

DEADLINE

Civil Site Work & Paving ContractorThis subcontract opportunity is for a Civil Site Work and Paving Contractor to support prime contractors on US Army Corps of Engineers projects managed by Endist Omaha. The scope of work involves demolition, grading, and paving services, specifically focusing on replacing asphalt with concrete in truck offload areas, installing concrete-filled pipe bollards, and repairing remote containment basin drainage pipelines. All work must be performed in accordance with UFGS 32 11 23 and 33 40 00 to ensure the delivery of restored pavement and fully functional drainage systems. The project is located in Mather, zip code 95655, and falls under NAICS code 237310. This is a total Small Business Set Aside opportunity through the Department of Defense. Interested parties must submit their responses by the deadline of November 20, 2026.

Highway, Street, and Bridge Construction

POSTED

about 24 hours ago

DEADLINE

Fuel Filtration & Monitoring Supplier/InstallerThis subcontract opportunity is for a supplier and installer to provide fuel filtration and water removal systems for prime contractors working on US Army Corps of Engineers projects under Endist Omaha. The scope of work involves replacing fuel monitors on F-24 dispensers with non-coalescing filters and installing hand-pumped water draw-off systems in strict accordance with UFC 3-460-03 standards to ensure a fully operational system. The project is designated as a total Small Business Set Aside under NAICS code 238220 and will be performed in Mather, zip code 95655. Interested parties must submit their responses by the deadline of November 20, 2026, for this Department of Defense requirement.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

about 24 hours ago

DEADLINE

Industrial Coating SpecialistThis subcontract opportunity for an Industrial Coating Specialist involves the surface preparation and high-performance recoating of a jet fuel tank exterior for projects managed by the US Army Corps of Engineers, Endist Omaha. The selected contractor will be responsible for executing AMPP-approved blasting and applying coatings in strict accordance with UFGS 09 97 13.17 and 09 97 13.27 to ensure a fully corrosion-protected exterior. The project is designated as a total Small Business Set Aside under NAICS code 238320 and will be performed in Mather, zip code 95655. Interested parties must hold the required AMPP certification to be eligible. The solicitation was posted on October 22, 2026, with a response deadline of November 20, 2026.

Painting and Wall Covering Contractors

POSTED

about 24 hours ago

DEADLINE

Fuel Tank Mechanical SpecialistThis subcontract opportunity is for a Fuel Tank Mechanical Specialist to perform mechanical modifications on a horizontal aboveground jet fuel tank for prime contractors supporting US Army Corps of Engineers projects under Endist Omaha. The scope of work includes the installation of 4 inch sampling and gauge hatches, clock type mechanical gauges, audible and visual alarms, and a full length tank catwalk. All work must be completed in strict accordance with UFC 3-460-03 and MIL-STD-161J standards to deliver a fully modified and commissioned fuel tank with functional gauging systems. The project is designated as a Total Small Business Set Aside under NAICS code 238220 and will be performed in Mather, zip code 95655. Interested parties must submit their responses by the deadline of November 20, 2026. This Department of Defense requirement focuses on specialized mechanical upgrades to ensure fuel storage infrastructure meets rigorous military specifications.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

about 24 hours ago

DEADLINE

STI Standard Tank InspectionThis subcontract opportunity is for the performance of tank inspections at Fort Campbell, Kentucky, supporting prime contractors on Army projects. The selected provider will utilize standard inspection tools to evaluate tanks in strict accordance with Steel Tank Institute certifications and standards, culminating in the delivery of a formal STI inspection report. Managed by the Department of Defense under the W071 Endist Omaha agency, this requirement is designated as a sole source set-aside for Service-Disabled Veteran-Owned Small Businesses. The project falls under NAICS code 541330, with a response deadline set for November 13, 2026.

Engineering Services

POSTED

about 24 hours ago

DEADLINE

API 570 Piping InspectionThis subcontract opportunity involves performing API 570 inspections of piping systems associated with fuel tanks for prime contractors on Army projects located at Fort Campbell, Kentucky. The scope of work requires the use of calibrated Non-Destructive Testing equipment to verify piping integrity and prevent leaks, culminating in the delivery of a formal API 570 inspection report. To qualify, the provider must employ a Certified API 570 Inspector. Managed by the Department of Defense under the W071 Endist Omaha agency, this requirement is designated as a sole source set-aside for Service-Disabled Veteran-Owned Small Businesses under NAICS code 541330. The solicitation was posted on October 22, 2026, with a response deadline of November 13, 2026.

Engineering Services

POSTED

about 24 hours ago

DEADLINE

Strapping Chair Fabrication and InstallationThis subcontract involves the fabrication and installation of a strapping chair used for tank circumference measurement on Army projects located at Fort Campbell, Kentucky. The scope of work requires the use of steel fabrication tools and welding equipment to secure the chair to the tank shell, with a strict requirement that all welding adheres to API 650/653 standards for tank alterations. The opportunity is set aside as a sole source for Service-Disabled Veteran-Owned Small Businesses under NAICS code 332312. Managed by the Department of Defense through the W071 Endist Omaha agency, the project requires the delivery of a fully completed and installed strapping chair. Responses are due by November 13, 2026.

Fabricated Structural Metal Manufacturing

POSTED

about 24 hours ago

DEADLINE

Tank Wiper Seal InstallationThis subcontract involves the supply and installation of new wiper seals for floating roof tank systems at Fort Campbell, Kentucky, supporting prime contractors on Army projects. The scope of work includes inspecting wedge-type wiper seals for tears and flexibility, removing existing seals, and installing new ones to maintain tank integrity and emissions control. All work must be performed in accordance with API 653 and API 650 standards to deliver a fully verified wiper seal system. Managed by the Department of Defense under the W071 Endist Omaha agency, this opportunity is designated as a sole source set-aside for Service-Disabled Veteran-Owned Small Businesses. The project falls under NAICS code 238990. Interested parties should note the response deadline of November 13, 2026.

All Other Specialty Trade Contractors

POSTED

about 24 hours ago

DEADLINE

API 653 External AST InspectionThis subcontract opportunity involves performing external aboveground storage tank inspections for prime contractors on Army projects located at Fort Campbell, Kentucky. The scope of work includes conducting visual inspections of containment areas, testing alarms and Automatic Tank Gauge equipment, and verifying that all appurtenances comply with DoD Standard AW 78-24-27. The selected provider must deliver comprehensive draft and final inspection reports along with completed API Std 653 checklists. To qualify for this project, the contractor must provide a Certified API 653 Inspector equipped with calibrated UT gauges. This is a sole source set-aside for Service-Disabled Veteran-Owned Small Businesses under NAICS code 541330. The project is managed through the Department of Defense, specifically the W071 Endist Omaha office, with a response deadline of November 13, 2026.

Engineering Services

POSTED

about 24 hours ago

DEADLINE

Construction Site Security Administration (CSSA)The Construction Site Security Administration subcontract, issued by the Department of Defense under W071 Endist Omaha, provides critical security oversight and administration for prime contractors working on USACE SCIF/SAPF construction projects. The scope of work includes the development and execution of Construction Security Plans, the deployment of Site Security Managers, Construction Security Technicians, and Cleared American Guards, and the management of access control logs and security monitoring equipment. All personnel assigned to this contract are required to maintain Top Secret clearances to ensure the integrity of sensitive facilities. Key deliverables include the final executed Construction Security Plans and the submission of daily security administration reports. Interested parties should note the response deadline of November 13, 2026, for this effort based in the 68102 zip code area.

Security Guards and Patrol Services

POSTED

about 24 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS