Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →
CLEATUS
Get CLEATUS

INJECTOR ASSEMBLY, FUEL

Active
SPE7L1-27-T-3115Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

Solicitation SPE7L1-27-T-3115, issued by the DLA Weapons Support Land Supply Chain, is a small business set-aside for the procurement of one fuel injector assembly. The required item is identified by NSN 2910016106187 and part number 50567300 from Hatz Diesel of America Inc. The contract specifies a delivery timeline of five days after the order, with the shipment delivered FOB Origin to Wheeler Army Airfield in Hawaii. Inspection and acceptance will occur at the destination in accordance with FAR 52.246-2. The contractor must adhere to strict packaging and marking standards, including MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and RP001 for palletization. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements. Administrative requirements include the use of the Wide Area WorkFlow system for electronic invoicing and payment. The contract incorporates various FAR and DFARS clauses covering cybersecurity incident reporting, the Buy American Act, and prohibitions on covered defense telecommunications equipment.

General Info

Small business contract for one Hatz fuel injector assembly delivered to Hawaii.

Agency

Department Of Defense → DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

NAICS

336310 - Motor Vehicle Gasoline Engine and Engine Parts Manufacturing

Place of Performance

168 SASAOKA STREET BLDG 365, WHEELER ARMY AIRFIELD, HI, 96854, USA

Set-Aside

NONE

Documents

1
PDF, High priority: read this firstrfq
High

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → DLA WEAPONS SUPPORT LAND SUPPLY CHAIN
Contacts1 person available
OfficeUSA
Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT LAND SUPPLY CHAIN
Office AddressUSA
Contacts
Kristina Derry
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
INJECTOR ASSEMBLY,FUEL
INJECTOR ASSEMBLY,F
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
HATZ DIESEL OF AMERICA INC 61080 P/N 50567300
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7018894916 0001 EA 1.000
NSN/MATERIAL:2910016106187
DELIVERY (IN DAYS):0005
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0
UNIT CONT:10 OPI:O
INTRMDTE CONT:D3 INTRMDTE CONT QTY:AAA
PACK CODE:Q PACKING LEVEL: B
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
SPE7L1-27-T-3115
SECTION B
PR: 7018894916 PRLI: 0001 CONT’D
BULK BREAK POINT:
WX3JJY
0209 CS BN CO A DISTRIBUTI
MULTI CLASS SSA AWCF SSF
168 SASAOKA STREET BLDG 365
WHEELER ARMY AIRFIELD HI 96854
US
RDD 999/NMCS SHIPMENT. TRANSPORTATION SEE DLAD PROC NOTE C19. FIRST DESTINATION TRANS SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
WX3JJY
0209 CS BN CO A DISTRIBUTI
MULTI CLASS SSA AWCF SSF
168 SASAOKA STREET BLDG 365
WHEELER ARMY AIRFIELD HI 96854
US
MARKFOR
WX3JJY
0209 CS BN CO A DISTRIBUTI
MULTI CLASS SSA AWCF SSF
168 SASAOKA STREET BLDG 365
WHEELER ARMY AIRFIELD HI 96854
US
M/F: (TCN) WX3JJY62930169
RDD: 999
PROJ: TP 1
SUPP ADD: W9046W SIG: C
FOR GOVERNMENT USE ONLY: (IPD) 02
DIC: A01 DIST: V ADV: FC: Z9
Need Ship Date:00/00/0000 Original Required Delivery Date:10/28/2026
SPE7L1-27-T-3115 NSN/Part Number: 2910-01-610-6187 Quantity: 1 EA Purchase Request: 7018894916QTY: 1 Delivery: 5 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 336310
New
DIBBS
VALVE ASSEMBLY, PURG
Solicitation # SPE7MC-27-T-0292
Solicitation SPE7MC-27-T-0292, issued by DLA Weapons Support Maritime Hardware/Electrical, is a request for quotes for 80 units of a Purge Valve Assembly, identified as NSN 4820004537142 and Part Number 2681-102 from Tactair Fluid Controls Inc. This item is designated as a critical application item. The contract specifies a delivery period of 333 days, with a need ship date of September 18, 2027, and an original required delivery date of January 3, 2028. Terms are FOB Origin, with inspection and acceptance occurring at the destination, DLA Distribution Cherry Point in North Carolina. The contractor must adhere to strict technical and quality standards, including MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. Environmental restrictions prohibit the intentional addition of mercury and the use of Class I ozone-depleting chemicals. All hazardous materials must be labeled according to the Hazard Communication Standard. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and payment. The solicitation is categorized under NAICS code 336310 and incorporates various FAR and DFARS clauses regarding equal opportunity, cybersecurity, and domestic sourcing restrictions.
CHERRY POINT PHANTOM RD BLDG

POSTED

2 days ago

DEADLINE

in 3 days
View Details
NAICS: 336310
New
Federal
Nozzle & Holder ASSY .375 MM X 145 DEG Stray Tip
Solicitation # SPMYM127Q4003
Solicitation SPMYM127Q4003 is a small business set-aside for the procurement of 13 new Nozzle and Holder Assemblies (.375 MM X 145 DEG Stray Tip) for ALCO 251C Fuel Injection Nozzles used in LHD-1 Class Emergency Diesel Generators. Issued by DLA Maritime Norfolk, the requirement specifies part number 22300124 from manufacturer Fairbanks Morse Defense (CAGE 7PZX0). All items must be new, as refurbished or used components are strictly prohibited. The required delivery date is one week or sooner, with shipping terms established as FOB Destination. Award will be based on best value, with technical capability and delivery lead time weighted as substantially more significant than other factors. To be considered technically acceptable, offerors must provide a detailed unpriced capabilities statement including the manufacturer's name, country of origin, and specific lead times. The contract requires strict adherence to MIL-STD-130 for unique item identification and MIL-STD-129 for shipment labeling. Invoicing must be processed through the Wide Area Workflow (WAWF) system. Responses are due by November 6, 2026, at 1:30 pm EST via email to the primary point of contact.
DLA Maritime - Norfolk

POSTED

2 days ago

DEADLINE

in 5 days
View Details
NAICS: 336310
New
Federal
G22-G24 Governor Pump Spare Purchase (CPN)The Bureau of Reclamation, under the Department of the Interior, has issued a forecast for the G22-G24 Governor Pump Spare Purchase for the Columbia-Pacific Northwest region. This procurement action is categorized under NAICS code 336310 and is intended to secure necessary spare parts for governor pump systems. The forecast was posted on October 30, 2026, and lists Kelli Jasperson as both the primary point of contact and the Small Business Specialist. Interested parties can find further details regarding this requirement through the Acquisition Gateway portal.
Bureau of Reclamation

POSTED

2 days ago

DEADLINE

N/A
View Details
NAICS: 336310
New
DIBBS
Supply of Engine Fuel Pump Parts Kits (NSN 2910010402811)This subcontract involves the manufacture or sourcing of 255 engine fuel pump parts kits associated with NSN 2910010402811 for prime contractors supporting the Department of Defense. The work is managed by the DLA Weapons Support ASC Supplier OEM Division and requires strict adherence to the DLA Master List of Technical and Quality Requirements, specifically regarding R/I numbers. The contractor is responsible for providing domestic material disclosure for any non-domestic components used in the kits. Performance for this contract is centered in Cherry Point, and the procurement falls under NAICS code 336310.
DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

3 days ago

DEADLINE

in 5 days
View Details
NAICS: 336310
New
DIBBS
HEAD, FLUID FILTER
Solicitation # SPE7L1-27-T-2976
Solicitation SPE7L1-27-T-2976 is a request for quotations issued by the DLA Weapons Support Land Supply Chain for the procurement of 10 fluid filter heads, identified by NSN 2910-01-556-5144. The contract requires delivery within five days after receipt of order, with an original required delivery date of November 3, 2026. Shipping is designated as FOB Origin, and the items are to be delivered to the NAVSUP Weapon Systems Support Joint Consolidation Point in Mechanicsburg, Pennsylvania. Inspection and acceptance will also take place at the point of origin. The procurement is subject to strict packaging and marking standards, including MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and RP001 for palletization. Technical and quality requirements are governed by the DLA Master List under RA001. Key regulatory compliance includes the Buy American and Balance of Payments Program, NIST SP 800-171 assessment requirements, and various DFARS clauses regarding cybersecurity and the prohibition of covered defense telecommunications equipment. Award may be automated, and the government will apply a HUBZone price evaluation preference. Invoicing and payment must be processed electronically through the Wide Area WorkFlow system.
DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

3 days ago

DEADLINE

in 8 days
View Details
NAICS: 336310
New
DIBBS
MODULATOR ASSEMBLY, IGN
Solicitation # SPE7L1-27-T-3027
Solicitation SPE7L1-27-T-3027 is a small business set-aside issued by the DLA Weapons Support Land Supply Chain for the procurement of one Modulator Assembly, Ignition (NSN 2920-01-728-2995). The requirement is divided into two line items with delivery destinations at Fort Bragg, North Carolina, and Vicenza, Italy. Delivery is required within five days after receipt of order, with original required delivery dates set for October 28 and 29, 2026. The contract is managed under the First Destination Transportation program with shipping terms as FOB Origin and inspection and acceptance occurring at the destination. The procurement is subject to strict quality and environmental standards, including the prohibition of Class I ozone-depleting chemicals and compliance with the Buy American and Balance of Payments Program. Packaging must adhere to ASTM D3951 and RP001, while marking and labeling must follow MIL-STD-129. Technical and quality requirements are governed by the DLA Master List, and the contractor must provide Material Safety Data Sheets for hazardous materials. Administrative requirements include electronic invoicing via Wide Area WorkFlow and adherence to DFARS cybersecurity and telecommunications restrictions.
DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

3 days ago

DEADLINE

in 8 days
View Details
NAICS: 336310
New
DIBBS
VALVE, FUEL SYSTEM
Solicitation # SPE7L4-27-U-0063
Solicitation SPE7L4-27-U-0063 is a total small business set-aside request for quotations issued by the DLA Weapons Support LSO Combat Vehicles and Armament for the procurement of fuel system valves, NSN 2910015963704. This requirement is designated as a critical application item with an estimated quantity of 8 units. The procurement may result in a unilateral indefinite delivery contract with a one-year term or until a maximum aggregate value of 350,000.00 is reached. The contract includes a guaranteed minimum quantity of one unit, with an estimated two orders per year. Delivery is required within 112 days after order, shipping to various CONUS and OCONUS DLA depots. Qualified suppliers must submit electronic quotes via the DIBBS portal by October 29, 2026. Award will be based on price evaluation of qualified suppliers and may be processed as an automated award. Technical requirements include compliance with RA001 and a prohibition on additive manufacturing unless authorized. Packaging must adhere to ASTM D3951 and RP001, with marking and labeling following MIL-STD-129. The contract is fixed-price, requiring the use of the Wide Area WorkFlow system for invoicing and receiving reports. Inspection and acceptance will occur at the destination per FAR 52.246-1. All offerors must comply with the Buy American Act, Berry Amendment, and cybersecurity standards under DFARS 252.204-7012.
DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT

POSTED

3 days ago

DEADLINE

in 2 days
View Details
NAICS: 336310
New
DIBBS
PLUNGER ASSEMBLY, FU
Solicitation # SPE7L5-27-T-0439
Solicitation SPE7L5-27-T-0439 is a request for quotations issued by the DLA Weapons Support Land Supplier Opns Engines for the procurement of eight fuel injector plunger assemblies, identified by NSN 2910410031049. This item is classified as a commercial off the shelf critical application item, with associated part numbers Z021015-0 from Steyr Motors AG and 135519 from URO Vehiculos Especiales SA. The required delivery date is May 1, 2027, with a delivery window of 172 days after the order. Shipping is set as FOB Origin, with the destination being the DLA Distribution DDSP New Cumberland facility in Pennsylvania. The contract mandates strict adherence to quality and technical standards, including MIL-STD-129 for marking and MIL-STD-2073-1E for packaging. It incorporates several DLA master list requirements, such as RP001 for packaging, RQ011 for the removal of government identification from non-accepted supplies, and RQ017 for bare item marking. Additionally, the use of Class I ozone depleting chemicals is strictly prohibited. Administrative requirements include the use of the Wide Area WorkFlow system for electronic invoicing and payment. The solicitation is subject to various federal regulations, including the Buy American Act, DFARS cybersecurity reporting standards for covered defense information, and HUBZone price evaluation preferences.
DLA WEAPONS SUPPORT LAND SUPPLIER OPNS ENGINES

POSTED

3 days ago

DEADLINE

in 8 days
View Details
NAICS: 336310
New
DIBBS
NOZZLE, FUEL INJECTI
Solicitation # SPE7L5-27-T-0256
Solicitation SPE7L5-27-T-0256 is a total small business set-aside issued by the DLA Weapons Support Land Supplier Opns Engines for the procurement of 398 fuel injection nozzles, identified by NSN 2910-01-566-4206. This is a restricted source item requiring engineering source approval from the Government design control activity. Delivery is required within 74 days after receipt of order, with shipping terms set as FOB Origin and the delivery destination located in Tracy, California. Inspection and acceptance will occur at the destination in accordance with FAR 52.246-2. Offerors must comply with strict technical and quality requirements, including the DLA Master List of Technical and Quality Requirements and ASTM D3951 for packaging. Alternate offerors are required to provide comprehensive documentation, including all manufacturing drawings, process sheets, source identification for critical operations, and a shock extension report per MIL-S-901. If reverse engineering was utilized, a detailed engineering analysis report is mandatory. The contract incorporates various FAR and DFARS clauses regarding the Buy American Act, cybersecurity standards under NIST SP 800-171, and the use of the Wide Area WorkFlow system for electronic invoicing and payment.
DLA WEAPONS SUPPORT LAND SUPPLIER OPNS ENGINES

POSTED

3 days ago

DEADLINE

in 2 days
View Details
NAICS: 336310
New
DIBBS
FILTER ELEMENT, FLUID
Solicitation # SPE4A6-27-T-5738
Solicitation SPE4A6-27-T-5738 is a fixed-price request for quotations issued by the DLA Weapons Support ASC Commodities Division for 65 fluid filter elements, identified by NSN 1650-01-515-3360. The procurement specifies PTI Technologies Inc. part numbers 7585381 and S271T006-1, requiring adherence to TDP Rev A Gen 1 and QAP 13873. Delivery is required within 156 days after order, with a need ship date of April 4, 2027, shipped FOB Origin to DLA Distribution San Joaquin in Tracy, California. Inspection and acceptance will occur at the destination. The contract mandates strict quality and technical compliance, including a CMMC Level 2 Self-Assessment, ISO 9001:2015 certification, and adherence to Procurement Note L32 for higher-level quality requirements. Sampling must follow MIL-STD-1916, ASQ H1331, or a comparable zero-based plan. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, with additional FAA-specific requirements for commercial material and bare item marking. Contractors must maintain supply chain traceability documentation and utilize the Wide Area WorkFlow system for invoicing and payment. This solicitation is not a small business set-aside and requires compliance with the Buy American Act and Berry Amendment.
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

3 days ago

DEADLINE

in 2 days
View Details
NAICS: 336310
New
DIBBS
O-RING
Solicitation # SPE7L1-27-T-3087
This solicitation, issued by the DLA Weapons Support Land Supply Chain, is a small business set-aside for the procurement of one critical application O-ring, identified by NSN 5331016927239 and part number WDM-0298-0516-AX35 from Parker-Hannifin Corporation. The requirement specifies a delivery lead time of 20 days after receipt of order, with the final destination being the USS Canberra LCS 30. The item must be packaged and sealed in a medium duty, waterproof, greaseproof, opaque bag in accordance with MIL-DTL-117, Type II, Class C, Style 1, and marked according to MIL-STD-129 with a special do not bend warning. The contract mandates strict adherence to quality and material standards, including a total prohibition on asbestos and Class I ozone depleting chemicals. Technical and quality requirements are governed by the DLA Master List, and supply chain traceability documentation is required per DLA Directive C03. The award process includes a HUBZone price evaluation preference and requires compliance with the Buy American Act and the Berry Amendment. Administrative requirements include electronic invoicing via the Wide Area WorkFlow system and destination inspection and acceptance per FAR 52.246-1. Additionally, the solicitation prohibits the use of additive manufacturing for the supplied parts unless specifically authorized.
DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

3 days ago

DEADLINE

in 8 days
View Details
NAICS: 336310
New
Federal
Emergency Lighting & Warning SystemsThis subcontract involves the supply and installation of comprehensive LED emergency and scene lighting systems for fire apparatus projects managed by the Bureau of Reclamation. The scope of work includes the integration of lightbars, marker lights, turn signals, and specialized aerial platform tip lights, all coordinated through multiplexed controls. Additionally, the contractor is responsible for providing LED lighting arrays and compartment illumination to ensure full operational visibility. All installations must strictly adhere to NFPA, DOT, and SAE standards to ensure safety and regulatory compliance. This project is managed under the Department of the Interior's Reclamation Contracting Activity and falls under NAICS code 336310. The objective is to deliver a fully integrated emergency warning and scene lighting package tailored for prime contractors.
Reclamation Contracting Activity

POSTED

3 days ago

DEADLINE

in 11 days
View Details

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

Same awarding agency

NAICS: 488410
New
DIBBS
Military-Grade Packaging and Marking ServicesThis subcontract involves providing specialized packaging and marking services for the Department of Defense under the DLA Weapons Support Land Supply Chain. The scope of work requires the contractor to package seven torsion springs in strict accordance with MIL-STD-2073-1E standards, specifically utilizing QUP:001, PRES MTHD:10, and CLNG/DRY:1. Additionally, the contractor must apply all necessary marking and labeling per MIL-STD-129 using industrial marking equipment and military-specification preservatives. The project is categorized under NAICS code 488410 and will be performed in Greensboro, North Carolina. Interested parties must note the response deadline of November 13, 2026, for this specific requirement to deliver fully processed shipments for prime contractors.
Motor Vehicle Towing

POSTED

2 days ago

DEADLINE

in 12 days
View Details
NAICS: 332613
New
DIBBS
Helical Torsion Spring FabricationThis subcontract involves the fabrication of seven helical torsion springs for the DLA Weapons Support Land Supply Chain. The manufacturer is required to produce the units according to Basic Drawing NR 53711 7066804 Revision A using precision winding and coiling machinery to meet the specifications of NSN 5360-01-486-1982. Performance will take place in Greensboro, North Carolina, under NAICS code 332613. Strict quality and regulatory standards are mandated for this project, including zero non-conformances per MIL-STD-1916 or ASQ Z1.4. The contractor must maintain US/Canada Joint Certification Program certification and ensure full compliance with DFARS 252.204-7012. The solicitation was posted on October 30, 2026, with a response deadline of November 13, 2026.
Spring Manufacturing

POSTED

2 days ago

DEADLINE

in 12 days
View Details
NAICS: 423610
New
DIBBS
Storage Battery Supplier (NSN 6140-01-694-9187)This subcontract, issued by the Department of Defense under the DLA Weapons Support Land Supply Chain, requires the procurement of two storage batteries meeting NSN 6140-01-694-9187 specifications. The supplier is responsible for ensuring all items are marked according to MIL-STD-129 and palletized in compliance with RP001 DLA Packaging Requirements, with a specific mandate that outer packaging be labeled as nonspillable. The contract stipulates that the two packaged and marked batteries must be delivered FOB Origin within 60 days of the order date. This requirement falls under NAICS code 423610 and is intended to support prime contractors delivering on DLA supply contracts.
Electrical Apparatus and Equipment, Wiring Supplies, and Related Equipment Merchant Wholesalers

POSTED

2 days ago

DEADLINE

in 8 days
View Details
NAICS: 333998
New
DIBBS
Kit Assembly and Packaging ServicesThis subcontract for Kit Assembly and Packaging Services supports the DLA Weapons Support Land Supply Chain by providing final kitting, packaging, and marking for prime contractors. The selected provider will be responsible for gathering components, verifying counts, and ensuring all installation kits are fully assembled, marked, and palletized. All work must strictly adhere to MIL-STD-2073-1, MIL-STD-129, and MIL-STD-130 standards. A critical requirement for this engagement is demonstrated experience with Unique Item Identification marking. The project falls under NAICS code 333999 and is managed by the Department of Defense. Interested parties must submit their responses by December 1, 2026, for performance at the designated facility in zip code 17070-5002.
All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

2 days ago

DEADLINE

in about 1 month
View Details
NAICS: 332322
New
DIBBS
Custom Brackets and Sheet Metal FabricationThis subcontract involves the fabrication of custom formed metal brackets, plates, and housings intended for prime contractors supporting DLA Weapons Support Land Supply Chain installation kits. The scope of work includes sheet metal cutting, bending, punching, and finishing processes that must strictly adhere to TDP Rev B Gen 2 specifications. Additionally, all components must receive finishes that meet rigorous military corrosion resistance standards to ensure durability and performance. Managed under the Department of Defense for the DLA Weapons Support Land Supply Chain, the project falls under NAICS code 332322. The performance of the contract is centered in the 17070-5002 zip code area. Interested parties should note the response deadline of December 1, 2026, for this specialized manufacturing requirement.
Sheet Metal Work Manufacturing

POSTED

2 days ago

DEADLINE

in about 1 month
View Details
NAICS: 332722
New
DIBBS
Specialized Fasteners and Hardware SupplyThis subcontract involves the procurement of nuts, bolts, screws, and specialized fasteners to support prime contractors delivering installation kits for the DLA Weapons Support Land Supply Chain. All provided hardware must strictly adhere to the grade and material standards specified in the TDP Rev B Gen 2 reference drawings. Due to the critical nature of the components, the supplier is required to maintain quality certification for aerospace and defense grade fasteners to ensure all deliveries are fully certified. Managed by the Department of Defense under NAICS code 332722, the contract was posted on October 30, 2026, with a response deadline of December 1, 2026. Performance for this requirement is centered in the 17070-5002 zip code area. Interested parties can find further details through the DLA Weapons Support Land Supply Chain procurement portal.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

2 days ago

DEADLINE

in about 1 month
View Details
NAICS: 332710
New
DIBBS
Precision Machined Components for Vehicular Installation KitsThis subcontract involves the manufacture of precision metal parts and hardware intended for vehicular installation kits supporting the DLA Weapons Support Land Supply Chain. The scope of work requires the use of CNC machining, milling, turning, and drilling to produce components that strictly adhere to material specifications and military drawing tolerances as outlined in the TDP Rev B Gen 2 reference drawings. The project is managed under NAICS code 332710 for the Department of Defense. Interested parties must submit their responses by December 1, 2026, for performance located in the 17070-5002 zip code area. The final deliverable consists of finished machined metal components that meet all specified technical requirements for prime contractors.
Machine Shops

POSTED

2 days ago

DEADLINE

in about 1 month
View Details
NAICS: 326220
New
DIBBS
Supply of Rubber O-Rings (NSN 5331-01-119-0468)This subcontract involves the procurement of 478 rubber O-rings, part number 5331-01-119-0468, to support prime contractors under DLA supply contracts. The selected provider is responsible for fabricating or sourcing these components in strict accordance with technical drawings, while providing all necessary material certifications and process operation sheets. All shipments must be packaged and marked according to MIL-STD-2073-1E and MIL-STD-129 standards. Managed by the Department of Defense under the DLA Weapons Support Land Supply Chain, the contract requires full compliance with DFARS prohibitions regarding Chinese military and Huawei-related products. Performance will take place in San Diego, California. The final delivery must include the total quantity of O-rings along with all required certifications to ensure technical and regulatory compliance.
Rubber and Plastics Hoses and Belting Manufacturing

POSTED

2 days ago

DEADLINE

in 9 days
View Details
NAICS: 336413
New
DIBBS
Manufacturing and Supply of Operating Rods (Aft)This subcontract involves the manufacturing and supply of 20 precision-machined aft operating rods, identified by NSN 5340-01-493-9406, for prime contractors supporting DLA Aviation aircraft hardware projects. The work is managed under the Department of Defense through the DLA Weapons Support Land Supply Chain, falling under NAICS code 336413. The contractor is required to fabricate the components to strict government specifications and implement Unique Item Identification using 2D data matrix symbology in accordance with ISO/IEC 16022. Final delivery must include the specified units along with compliant UII markings and all necessary receiving reports.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

2 days ago

DEADLINE

in 29 days
View Details
NAICS: 333515
New
DIBBS
Spur Gear Fabrication (P/N 3-51145-1)This subcontract, issued by the DLA Weapons Support Land Supply Chain under the Department of Defense, requires the manufacture and supply of new, unused spur gears, specifically part number 3-51145-1. The selected contractor must utilize precision gear cutting and machining equipment to ensure the product meets exact technical specifications. A critical requirement of the contract is the performance of Government First Article Testing to validate conformity, with the final deliverables consisting of the physical spur gears and the corresponding test results. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 333515. To be eligible, the provider must be an approved source or demonstrate the ability to produce an exact product as outlined in Section L. The response deadline for this requirement is November 30, 2026, with performance taking place in the 84056-5734 zip code area.
Cutting Tool and Machine Tool Accessory Manufacturing

POSTED

2 days ago

DEADLINE

in 29 days
View Details
NAICS: 336350
New
DIBBS
WEIGHT, COUNTERBALANCE
Solicitation # SPE7L1-27-T-1759
Solicitation SPE7L1-27-T-1759 is a fixed-price request for quotations issued by the DLA Weapons Support Land Supply Chain for the procurement of two counterbalance weights, identified by NSN 3040-01-627-0637. The contract requires delivery within 129 days after receipt of order, with shipping and acceptance terms set as FOB Origin. Delivery is designated for the DLA Distribution San Joaquin facility in Tracy, California. Offerors must submit quotes via the DIBBS system and are encouraged to provide quantity ranges to accommodate demand volatility. The procurement is subject to stringent quality and security standards, requiring manufacturers to maintain an inspection system compliant with SAE AS9003 or ISO 9001. Key technical restrictions include a total prohibition on Class I ozone depleting chemicals and the unauthorized use of additive manufacturing. The contract incorporates significant regulatory requirements, including ITAR and EAR export controls, CMMC Level 2 cybersecurity certification, and compliance with the Buy American Act and Berry Amendment. Packaging and marking must adhere to MIL-STD-2073-1E and MIL-STD-129, respectively. Payment will be processed electronically through the Wide Area WorkFlow system.
Motor Vehicle Transmission and Power Train Parts Manufacturing

POSTED

2 days ago

DEADLINE

in 3 days
View Details
NAICS: 332999
New
DIBBS
ROD, OPERATING, AFT
Solicitation # SPE7L1-27-R-0009
Solicitation SPE7L1-27-R-0009 is a full and open competition procurement issued by the DLA Weapons Support Land Supply Chain for the supply of 20 units of ROD, OPERATING, AFT (NSN 5340-01-493-9406). The required delivery date is 298 days after the date of award, with both inspection and acceptance occurring at the destination. Award decisions will be based on a trade-off between price and non-price factors, with past performance, proposed delivery, and socioeconomic support serving as the primary evaluation criteria. The contract mandates strict compliance with technical and quality requirements, including the prohibition of Class I ozone-depleting chemicals and the use of MIL-STD-1916 or ASQ H1331 for sampling. Items must be marked with unique item identifiers using ISO/IEC 16022 two-dimensional data matrix symbology. Due to the nature of the technical data, offerors must possess an approved US/Canada Joint Certification Program certification and adhere to ITAR or EAR export controls. Additionally, the contractor must meet CMMC Level 2 certification requirements and utilize the Wide Area WorkFlow system for electronic invoicing.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

2 days ago

DEADLINE

in 29 days
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

NAICS: 336310
Awarded
DIBBS
SPEED SENSOR, DIESEL ENGINE
Solicitation # SPE7MX27F0793
Defense Logistics Agency

POSTED

3 days ago

DEADLINE

N/A
View Details
NAICS: 336310
Awarded
DIBBS
TURBO SUPERCHARGER, ENGINE, NON-AIRCRAFT
Solicitation # SPE7L127FA26A
Defense Logistics Agency

POSTED

3 days ago

DEADLINE

N/A
View Details
NAICS: 336310
Awarded
DIBBS
TURBO SUPERCHARGER, ENGINE, NON-AIRCRAFT
Solicitation # SPE7LX27FA96R
Defense Logistics Agency

POSTED

3 days ago

DEADLINE

N/A
View Details
NAICS: 336310
Awarded
DIBBS
PARTS KIT, ENGINE WATER PUMP
Solicitation # SPE7L127FA25R
Defense Logistics Agency

POSTED

3 days ago

DEADLINE

N/A
View Details

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS