This Solicitation opportunity from Department Of Defense was posted on April 24, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

INLET, EVAPORATOR BL

Closed

SPE8E8-26-T-2897Federal

Submission Closed04/29/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 333415

New

DIBBS

FILTER ELEMENT, AIR CON

Solicitation # SPE8E8-27-T-0165

Solicitation SPE8E8-27-T-0165 is a fixed-price request for the procurement of eight air conditioning filter elements, identified by NSN 4130-01-464-7012. The contract is managed by DLA Troop Support, Construction and Equipment, with delivery required within 167 days after the order is placed. Supplies are to be delivered FOB Origin to DLA Distribution San Joaquin in Tracy, California. Inspection and acceptance will occur at the destination. The contractor must adhere to strict packaging and marking standards, including MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and RP001 for palletization. Technical and quality requirements are governed by the DLA Master List under RA001. Key compliance mandates include the Buy American Act, the Berry Amendment, and DFARS 252.204-7012 for safeguarding covered defense information. Additionally, the contract prohibits the intentional addition of mercury or mercury-containing compounds to the hardware. Invoicing and payment must be processed electronically through the Wide Area WorkFlow system.

POSTED

DEADLINE

COOLING COIL, AIR, DUCT

Solicitation # SPE8E9-27-T-0281

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

DEADLINE

COOLING COIL, AIR, DUCT

Solicitation # SPE8E9-27-T-0285

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

DEADLINE

COOLING COIL, AIR, DUCT

Solicitation # SPE8E9-27-T-0283

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

DEADLINE

COOLING COIL, AIR, DUCT

Solicitation # SPE8E9-27-T-0284

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

DEADLINE

CONDENSING UNIT, REFRIG

Solicitation # SPE8E8-27-T-0204

Solicitation SPE8E8-27-T-0204 is a total small business set-aside issued by DLA Troop Support Construction and Equipment for the procurement of two refrigerating condensing units under NSN 4130017149159. The requirement specifies part numbers FFAP-015Z-TFD-072 and RUT918-PM(MOD) from Cospolich Inc. The need ship date is April 12, 2027, with an original required delivery date of May 31, 2027. Delivery is established as FOB Origin, with both inspection and acceptance occurring at the destination, DLA Distribution San Joaquin in Tracy, California. The contract mandates strict adherence to DLA Master List technical and quality requirements, which take precedence over ASTM D3951 packaging standards. All packaging must be marked and labeled per MIL-STD-129, and palletization must comply with RP001. Key regulatory requirements include the Buy American and Balance of Payments Program, the Berry Amendment, and DFARS 252.204-7012 for safeguarding covered defense information. Invoicing and receiving reports must be processed electronically through the Wide Area WorkFlow system.

POSTED

DEADLINE

COOLING COIL, AIR, DUCT

Solicitation # SPE8E9-27-T-0286

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

DEADLINE

Solicitation # SPE8E8-27-T-0298

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Solicitation # SPE8E8-27-T-0157

Solicitation SPE8E8-27-T-0157 is a request for quotations issued by DLA Troop Support for the procurement of 11 compressor wrenches, identified by NSN 4130-00-873-5604 and Johnson Controls Navy Systems part number 364-06619-000. The contract is established as FOB Origin, with both inspection and acceptance occurring at the destination, specifically DLA Distribution San Joaquin in Tracy, California. The required delivery date is May 1, 2027, with a need ship date of April 27, 2027, and a delivery window of 182 days after award. The contractor must adhere to strict packaging and marking standards, including MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and RP001 for palletization. Special requirements include the prohibition of intentionally added mercury, with specific containment standards per NAVSEA 5100-003D if mercury is present. Administrative requirements include the use of the Wide Area Workflow system for electronic invoicing and compliance with various FAR and DFARS clauses, including the Buy American Act, the Berry Amendment, and cybersecurity standards under DFARS 252.204-7012. Quotes must be submitted via the DIBBS portal.

POSTED

DEADLINE

Solicitation # SPE7L1-27-T-2763

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

Solicitation # SPE7L1-27-T-1604

Solicitation SPE7L1-27-T-1604 is a total small business set-aside issued by the DLA Weapons Support Land Supply Chain for the procurement of three pump assemblies, specifically Fairbanks Morse LLC part number 16205340 (NSN 2930-01-088-1170). The requirement is managed under the First Destination Transportation program with delivery to DLA Distribution San Joaquin in Tracy, California. The need ship date is August 15, 2027, with an original required delivery date of October 31, 2027, and a delivery period of 292 days. The contract mandates strict adherence to technical and quality standards, including MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. Environmental restrictions prohibit the use of Class I ozone-depleting chemicals and the intentional addition of mercury. Quality assurance will be conducted at the destination using sampling methods such as MIL-STD-1916 or ASQ H1331. Offerors must submit quotes via the DIBBS system and comply with the Buy American Act and Berry Amendment. Payment will be processed electronically through the Wide Area WorkFlow system.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

Solicitation # SPE8E8-27-T-0172

Solicitation SPE8E8-27-T-0172 is a federal procurement issued by the DLA Troop Support Construction and Equipment office for the acquisition of 19 units of Air Dryer Assemblies, identified by NSN 4120-01-555-5461. The procurement is categorized under NAICS code 333415 and includes several approved part numbers from manufacturers such as Holmwood Highgate, Bendix Commercial Vehicle Systems, and Rheinmetall Man Military Vehicles. The delivery is set for 167 days after the award, with the shipping terms established as FOB Origin and the inspection and acceptance points both located at the destination, specifically the DDSP New Cumberland Facility in Pennsylvania. The contract mandates strict adherence to DLA Master List technical and quality requirements, including RP001 for packaging and palletization, RQ011 for the removal of government identification from non-accepted supplies, and RC001 for source approval documentation. Packaging must comply with ASTM D3951 and MIL-STD-129 for marking and labeling. Administrative requirements include electronic invoicing via the Wide Area WorkFlow system and compliance with various FAR and DFARS clauses, such as the Buy American Act, safeguarding of covered defense information, and prohibitions on certain telecommunications equipment. All quotes must be submitted through the DLA Internet Bid Board System.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 16 hours ago

DEADLINE

in 2 days

AI Contract Overview

The contract is for the procurement of nine units of an inlet evaporator blower identified by NSN 4130-01-389-4663 and part number 13229E6158, with delivery required within 165 days from the contract award, no later than November 28, 2026. All items must conform to the DLA Master List of Technical and Quality Requirements, which override any other standards unless otherwise specified in the contract. Technical and quality compliance is governed by referenced requirements such as RP001 for packaging, RQ006 for quality conformance inspection, and RQ011 for removal of government identification from non-accepted supplies, with inspection points and acceptance occurring at the destination. Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise stated, and critical, major, and minor attributes are to be verified at levels VII, IV, and II or with AQLs of 0.1, 1.0, and 4.0 respectively. Packaging must adhere to ASTM D3951 and MIL-STD-129, with palletization in accordance with RP001, and the unit of issue is each (EA). The item shall be delivered FOB origin to the specified DLA Distribution facility in New Cumberland, Pennsylvania, with no variance allowed in quantity. The contracting activity is under solicitation SPE8E8-26-T-2897, with drawings available only during solicitation via DIBBS, and all requirements take precedence over any prior revision unless amended.

General Info

Procure nine inlet evaporator blowers, deliver by Nov 28, 2026, FOB origin, comply with DLA and MIL-STD requirements.

Agency

Department Of Defense → DDSP NEW CUMBERLAND FACILITY

NAICS

333415 - Air-Conditioning and Warm Air Heating Equipment and Commercial and Industrial Refrigeration Equipment Manufacturing

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, USA

Set-Aside

NONE

Documents

SPE8E8-26-T-2897.pdf

AI Contract Breakdown

Uniform Contract Format

Contract not broken down yet

CLEATUS splits the solicitation into Uniform Contract Format (UCF) sections: scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseClosed

PostedApr 24

Solicitation

Response DeadlineApr 29

Deadline has passed

Submission Closed

04/29/2026, 05:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → DDSP NEW CUMBERLAND FACILITY

Contacts1 person available

OfficeUSA

Organization / AgencyDepartment Of Defense → DDSP NEW CUMBERLAND FACILITY

Office AddressUSA

Contacts

Alexis Selby

contact@example.gov

+1 (555) 000-0000

Full Description

INLET,EVAPORATOR BL
INLET,EVAPORATOR BLOWER
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ006: QUALITY CONFORMANCE INSPECTION REQUIREMENTS
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
(97403) U.S. ARMY COMM. & ELECT. COMMAND
THE DRAWING(S) LISTED BELOW ARE AVAILABLE AT
DLA DURING "OPEN SOLICITATION ONLY".
TO RECEIVE A COPY OF THE DRAWING(S)<(>,<)>
FOR EBS SOLICITATIONS USE URL
HTTPS://WWW.DIBBS.BSM.DLA.MIL/RFQ/
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
DETAILED DRAWING
QUALITY ASSURANCE DATA
IAW BASIC DRAWING NR 97403 13229E6158
REVISION NR DTD 08/19/1991
PART PIECE NUMBER: P/N 13229E6158
IAW REFERENCE DRAWING NR 97403 13229E6158
REVISION NR DTD 06/28/2023
PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to
SPE8E8-26-T-2897
SECTION B
PR: 7016178877 PRLI: 0001 CONT’D
determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7016178877 0001 EA 9.000
NSN/MATERIAL:4130013894663
DELIVERY (IN DAYS):0165
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
Need Ship Date:09/29/2026 Original Required Delivery Date:11/28/2026
SPE8E8-26-T-2897
SECTION B
PR: 7016178877 PRLI: 0001 CONT’D
SPE8E8-26-T-2897 NSN/Part Number: 4130-01-389-4663 Quantity: 9 EA Purchase Request: 7016178877QTY: 9 Delivery: 165 days ADO