Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

INSERT, SCREW THREAD

Active
SPE7L5-26-T-4656Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the procurement of 16 units of an insert with screw thread, identified by NSN 5325-01-614-5590 and part number 14001411, supplied by SOS-FAIRBANKS MORSE. The item is governed by technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, with specific provisions including packaging standards, removal of government identification from non-accepted supplies, and physical identification or bare item marking. Sampling must comply with MIL-STD-1916 or ASQ H1331 Table 1, or an equivalent zero-based sampling plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively; unspecified attributes are treated as major. Acceptance requires zero non-conformances in the sample lot unless otherwise stated, and manufacturers may choose attribute or variable inspection under MIL-STD-1916. The solicitation number is SPE7L5-26-T-4656, posted on July 29, 2026, with a response deadline of August 6, 2026. The contracting agency is the Department of Defense through Land Supplier Operations Engines, with performance located in San Diego, California, 92136-5299. Delivery is required within five days of award, and the primary point of contact is Christopher Walker, reachable via email and phone provided.

General Info

Procure 16 threaded inserts NSN 5325-01-614-5590, deliver in 5 days, zero defects, MIL-STD-1916 sampling, contract SPE7L5-26-T-4656

Agency

Department Of Defense → LAND SUPPLIER OPNS ENGINESView Agency

NAICS

332722 - Bolt, Nut, Screw, Rivet, and Washer ManufacturingView NAICS

Place of Performance

3755 BRINSER ST STE 1, SAN DIEGO, CA, 92136-5299, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → LAND SUPPLIER OPNS ENGINES
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → LAND SUPPLIER OPNS ENGINES
View Agency Profile
Office AddressUS
Contacts
CHRISTOPHER WALKER
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
INSERT,SCREW THREAD
INSERT,SCREW THREAD
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
SOS-FAIRBANKS MORSE, 7PZX0, P/N 14001411
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
ADEQUATE DATA FOR NSN/Part Number: 5325-01-614-5590 Quantity: 16 EA Purchase Request: 7017622828QTY: 16 Delivery: 5 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332722
New
DIBBS
Precision Fastener Manufacturing – Flat WashersThe contract mandates the manufacture of 950 flat washers per delivery order in full compliance with NSN 5310-01-532-5236 specifications, requiring strict adherence to defined material composition, dimensional tolerances, and surface finish requirements. All production must meet the technical and quality standards established by the Defense Logistics Agency, ensuring every component is manufactured to military-grade precision and reliability. The scope is focused exclusively on producing these washers under a subcontract arrangement, with no flexibility in design or material substitution. This is a total small business set-aside under the Small Business Administration guidelines, specifically designated for businesses classified under NAICS code 332722, which covers screw, nut, and bolt manufacturing. The solicitation was posted on July 29, 2026, with a response deadline of August 12, 2026, and is managed by the ASC Commodities Division under the Department of Defense. Performance is expected to align with DLA’s logistical and quality assurance frameworks, though the precise delivery location is unspecified. Bidders must be certified small businesses eligible under FAR 19.5 to qualify for award.
ASC COMMODITIES DIVISION

POSTED

about 18 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332722
New
DIBBS
NUT, PLAIN, HEXAGON
Solicitation # SPE7MC-26-T-158P
DDSP NEW CUMBERLAND FACILITY

POSTED

about 18 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332722
New
DIBBS
PARTS KIT, FASTENER
Solicitation # SPE4A7-26-Q-0923
The contract pertains to a Parts Kit, Fastener with NSN 1560-01-699-3342, for a quantity of 20 units under solicitation SPE4A7-26-Q-0923, with a delivery deadline of 250 days after award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions effective on the solicitation issue date or award date controlling based on acquisition size. The item is subject to cybersecurity compliance under CMMC Level 2, with the contractor required to be a certified third-party assessment organization. Physical identification and bare item marking standards are mandated, though unique item identification is not required per the service customer’s directive and DFARS 252.211-7003(c)(1)(i). Packaging must comply with DLA procurement standards, and inspection and acceptance occur at origin. Government identification must be removed from any non-accepted supplies. Technical data associated with the item is subject to export control under ITAR or EAR, prohibiting unauthorized disclosure to foreign persons anywhere, including U.S. subsidiaries and foreign nationals. Access to this controlled data is restricted to contractors with approved JCP certification, completed DOD export control training, and DLA authorization. The Defense Logistics Agency limits distribution to ensure compliance with DFARS 252.225-7048. The contract was posted on July 29, 2026, with responses due by August 11, 2026, and is managed by the Department of Defense under the ASC Supplier Oper AE and AF Division, with Latrice Brown as the primary point of contact.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 18 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332722
New
DIBBS
WASHER, FLAT
Solicitation # SPE4A1-26-T-2496
The contract is for the procurement of 362 flat washers identified by NSN 5310-00-543-4804 and part number CVC754-548D17, supplied by Triumph Aerospace Structures, LLC. The item is classified as a critical application product, and no approved technical data package is currently available, rendering the specification proprietary or insufficient for competitive sourcing. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with the controlling revision determined by the solicitation or award date depending on acquisition size. Packaging must comply with ASTM D3951 and MIL-STD-129, subject to precedence by DLA requirements, and palletization must follow RP001 guidelines. Mercury and mercury-containing compounds are prohibited unless explicitly exempted for functional uses in batteries, instruments, or weapon systems, with portable mercury-containing devices requiring shockproof design and a secondary containment barrier per NAVSEA 5100-003D. Sampling for quality assurance must follow MIL-STD-1916, ASQ H1331, or an equivalent zero-based plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Zero non-conformances are required in sampled lots unless otherwise directed. The certificate of conformance is authorized unless suspended by a quality assurance letter. Delivery is FOB origin with a 146-day lead time, inspection and acceptance occur at destination, and the quantity variance is strictly zero percent. Packaging and labeling must reflect the specified unit of issue and quantity per unit pack, with all shipments directed to DLA Distribution Depot Hill in Hill AFB, Utah, under DLA transportation protocols. The original required delivery date is August 11, 2019, with a needed ship date of July 12, 2019.
AVIATION SUPPLY CHAIN

POSTED

about 18 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332722
New
DIBBS
BOLT, MACHINE
Solicitation # SPE4A6-26-T-10GA
The contract pertains to the supply of 167 machine bolts identified by NSN 5306-01-096-5593 under solicitation SPE4A6-26-T-10GA, a HUBZone set-aside issued by the Department of Defense’s ASC Commodities Division. Delivery is due in 559 days from award, and the contractor is required to perform first article testing on one unit of the item, submitting a formal test report within 60 calendar days of contract execution. The contractor must provide written notice at least 14 days before shipping the tested unit for government final acceptance testing and ensure all documentation—including test results, material certifications, and manufacturing drawings—is included with the submission. The government has 60 days after receiving the report to approve, conditionally approve, or disapprove the first article. Production lot testing follows first article approval, requiring the contractor to deliver one randomly selected sample from the production lot to the Redstone Technical Test Center under strict labeling and documentation requirements, including signed forms, traceable shipping records, and a prepaid return label. The contractor must also account for and price the cost of samples consumed during government testing. The contract prohibits Fast Pay terms and mandates that all testing, inspection, and documentation comply with FAR 52.209-3 and its alternate clause, as well as specific procurement notes referencing supplemental first article and production lot testing protocols. Shipment of production samples must be clearly marked, accompanied by full technical and quality assurance records, and delivered to the designated government testing facility. The contractor is responsible for asserting proprietary rights on documentation and ensuring all material and process certifications are current and accurate. The solicitation requires disclosure of the current dealer or distributor and their certification status, emphasizing compliance with equivalent standards. The point of contact for inquiries is Tyler Greene, and the contract is subject to government oversight through the Quality Assurance Representative. All activities must align with the technical data package and applicable military standards including MIL STD 129 for labeling.
ASC COMMODITIES DIVISION

POSTED

about 18 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
CAP, FILLER OPENING
Solicitation # SPE7L1-26-T-889U
The contract pertains to the procurement of a CAP, FILLER OPENING with NSN 5340-01-371-2617 and part number 695155-1, under solicitation SPE7L1-26-T-889U, with a total quantity of 13 units to be delivered in 161 days from the award date, with delivery terms FOB origin and inspection and acceptance points at the destination. The item is classified as a commercial item, and unit identification is not required per DFARS 252.211-7003(c)(1)(i). Sampling must adhere to MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise specified, and attributes are to be classified as VII, IV, and II for critical, major, and minor respectively, with unspecified attributes treated as major. The supplier must meet all applicable DLA Master List of Technical and Quality Requirements referenced by R and I numbers, which supersede other standards like ASTM D3951. Packaging must comply with MIL-STD-129 for marking and labeling, and with RP001 for DLA packaging, requiring commercial packaging under ASTM D3951 unless the item is hazardous under FED-STD-313, in which case IP025 applies. Palletization must follow DLA guidelines, and the delivery address is DLA Distribution Warner Robbins, Robins AFB, GA. The contract is a total small business set-aside under NAICS code 332722, with a response deadline of August 10, 2026, and the required ship date is January 19, 2027. Documentation for source approval must be submitted per RC001, and all technical, quality, and packaging requirements are binding and take precedence over any conflicting commercial standards.
LAND SUPPLY CHAIN

POSTED

about 18 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332722
New
DIBBS
BOLT, INTERNAL WRENC
Solicitation # SPE4A6-26-T-10GQ
This contract specifies the procurement of internal wrenching bolts under solicitation SPE4A6-26-T-10GQ, with a total quantity of 7,178 units and a unit price of $7,178.00, resulting in a total contract value of approximately $51.5 million. The part number is 5306-01-278-3992, and delivery is required within 121 days from the award date, with FOB origin terms and inspection and acceptance occurring at the destination. The product must comply with stringent technical and quality requirements from the DLA Master List of Technical and Quality Requirements, which override any other standards such as ASTM D3951. Packaging must adhere to MIL-STD-129 and RP001 DLA Packaging Requirements, with unit packaging specified in the contract and palletization following specified guidelines. The item is designated as a Critical Application Item, requiring strict adherence to configuration control and engineering change procedures. Sampling inspection must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances allowed unless otherwise stated, and critical, major, and minor attributes are assigned specific verification levels or AQLs. Cybersecurity compliance requires a CMMC Level 2 self-assessment, and all documentation must include proper identification and marking per RQ017. The contract is reserved for Economically Disadvantaged Women-Owned Small Businesses under NAICS code 332722, and delivery must be made to DLA Distribution Depot Hill in Hill AFB, Utah.
ASC COMMODITIES DIVISION

POSTED

about 18 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
WASHER, LOCK
Solicitation # SPE4A6-26-T-10FK
The contract is for the procurement of 3,334 lock washers identified by NSN 5310-01-067-9589 and part number MS35338-137, governed by technical standards NASM35338 Revision 5 and ASME B18.21.1, with strict compliance required to DLA packaging and marking specifications including MIL-STD-2073-1E and MIL-STD-129. The item is classified as a critical application component, and no mercury or mercury-containing compounds may be intentionally added or come into direct contact with the hardware except for specific functional uses in batteries, lighting, instruments, sensors, weapon systems, or chemical reagents as authorized by NAVSEA, with portable mercury-containing devices requiring shockproof design and a secondary containment barrier. Sampling must adhere to MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and attributes are assigned verification levels or AQLs per established criteria. Deliveries are split between two locations—Albany, GA and Barstow, CA—with a total quantity divided into two CLINs for 678 and 2,656 units respectively, each subject to a 146-day delivery window from origin, FOB origin, and zero quantity variance. Inspection and acceptance occur at destination, packaged in accordance with DLA packaging requirements and palletized as mandated. The original required delivery date is March 13, 2027, with need ship dates of July 29, 2026 for Albany and March 11, 2028 for Barstow, indicating phased fulfillment. All items must be marked with no special markings as per code 00-00, and transportation logistics follow DLA procedural notes C19 and C20. The solicitation number is SPE4A6-26-T-10FK, issued under a federal acquisition, with technical and quality requirements linked to the DLA Master List and the point of contact is Daniel Fink.
ASC COMMODITIES DIVISION

POSTED

about 18 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
SCREW, TAPPING
Solicitation # SPE7LX-26-U-9079
This contract specifies the procurement of TAPPING SCREWS under NSN 5305-01-336-9467 with a total quantity of 48 packing units PG, each containing 50 screws, as defined by the updated unit of issue effective March 1, 2023. The item is identified by DAIMLER TRUCK NORTH AMERICA LLC part number 23-11657-306 and is being procured under solicitation SPE7LX-26-U-9079 as a Total Small Business Set-Aside. Delivery is required within 90 days FOB origin with no variance permitted in quantity and inspection and acceptance to occur at the destination. Packaging must comply with MIL-STD-2073-1E and DLA’s packaging requirements, including specific methods for preservation, wrapping, and intermediate containment, with marking conforming to MIL-STD-129 and no special marking codes applied. Sampling and verification protocols must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required for acceptance unless otherwise stated, and critical, major, and minor attributes must be assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. The Certificate of Conformance procedure is authorized unless overridden by a Quality Assurance Letter of Instruction, and non-accepted supplies must have government identification removed. All technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with revisions tied to the solicitation or award date depending on acquisition type.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 18 hours ago

DEADLINE

in 14 days
View Details
NAICS: 332722
New
DIBBS
SETSCREW
Solicitation # SPE4A6-26-T-10FS
This contract specifies the procurement of a set screw with detailed technical and packaging requirements. The item is a steel screw with dimensions 0.500-13 UNC-2A x 1.500 LG, cataloged under NSN 5305002638388 and referenced by specification FF-S-200 and Revision E dated 04/03/2025. Two units are required under Purchase Request 7017673356, with delivery due in 20 days FOB origin, no variance allowed in quantity, and inspection and acceptance occurring at the point of origin. Packaging must comply with MIL-STD-2073-1E, including preservation method 10, dry conditions, and packaging level B, with marking adhering strictly to MIL-STD-129 and no special marking codes applied. Palletization must follow DLA packaging standards, and mercury or mercury-containing compounds are strictly prohibited in preservation, packaging, packing, and marking, with limited exceptions for functional applications like batteries or specialized instruments governed by NAVSEA 5100-003D, which also mandates shock-proof design and secondary containment for portable mercury-containing devices. Sampling and quality verification follow MIL-STD-1916 or ASQ H1331 Table 1, with zero non-conformances required in sample lots unless otherwise specified, and attributes are assigned verification levels VII, IV, and II for critical, major, and minor characteristics respectively, or corresponding AQLs of 0.1, 1.0, and 4.0. Technical and quality requirements referenced via R or I numbers are governed by the DLA Master List, with the revision effective on the solicitation issue date controlling for simplified acquisitions. The item is to be delivered to the Ordnance Readiness Development Center in Jiji Township, Nantou County, Taiwan, with transportation governed by DLA procedural notes C19 and C20. The contract is issued under solicitation SPE4A6-26-T-10FS, with a response deadline of August 6, 2026, and the original required delivery date is August 3, 2026. Contract administration is managed by the Department of Defense’s ASC Commodities Division, with primary point of contact Daniel Fink.
ASC COMMODITIES DIVISION

POSTED

about 18 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
SCREW, MACHINE
Solicitation # SPE4A0-26-T-4088
This contract specifies the procurement of a machine screw with part number 12542766 and NSN 5305-01-716-2546, requiring exactly three units delivered within five days of order placement under solicitation SPE4A0-26-T-4088. The item is source-controlled and must be manufactured and tested in accordance with limited rights data that only approved vendors possess; vendors without direct access to this data or traceability to approved sources are not eligible to quote. Packaging must comply with MIL-STD-2073-1E and DLA packaging requirements, with marking adhering to MIL-STD-129 and no special marking code. The screw is not subject to shelf life restrictions, and item unique identification is explicitly waived per DFARS 252.211-7003(c)(1)(i). Sampling and inspection follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated, with verification levels assigned as VII, IV, and II for critical, major, and minor attributes respectively. Delivery is FOB origin to a U.S. military installation in Dongducheon, South Korea, with inspection and acceptance occurring at the destination. All supplies must be palletized per DLA guidelines, and shipping is governed by specific DLA procedures C19 and C20. The supplier must be source-approved, and a SAR package is required for new vendors seeking approval. The original required delivery date is July 24, 2026, with the solicitation posted on July 29, 2026, and responses due by August 6, 2026.
AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

about 18 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
NUT , SELF-LOCKING, PL
Solicitation # SPE4A0-26-T-4091
The contract specifies the procurement of two self-locking plate nuts, part number MS21060L6, with NSN 5310-00-779-6633, under solicitation SPE4A0-26-T-4091. These items are classified as critical application components and must comply with technical and quality standards referenced in the DLA Master List, including NASM21060 Revision 3 and NASM25027 Revision 1, with quality assurance provisions EQ003 and QAP-13873 governing inspection and verification. Sampling must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated, and attributes are to be assessed at specified verification levels or AQLs. Packaging and marking are mandated to adhere to MIL-STD-2073-1E and MIL-STD-129, with prohibition of mercury or mercury compounds in all packaging operations. The items must be delivered FOB origin within five days, with no variance allowed in quantity, and inspection and acceptance occur at the destination. Delivery is directed to Naval Air Station North Island in San Diego, California, with specific freight and parcel post instructions excluding parcel post in favor of traceable shipping methods. The contract includes detailed logistical parameters such as unit of issue, packaging codes, container specifications, and identification codes for government use. The required delivery date is May 14, 2026, and the contract was posted with a response deadline of August 6, 2026. The purchasing organization is the Department of Defense’s Aviation Supply Chain ESOc Buys, coordinated by Danita Davis, and the procurement falls under NAICS code 332722 for screw machine product manufacturing. All items must meet DLA packaging requirements RP001 and special marking conditions indicate no additional special markings are required.
AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

about 18 hours ago

DEADLINE

in 7 days
View Details

More opportunities from Department Of Defense → LAND SUPPLIER OPNS ENGINES

Same awarding agency

NAICS: 336390
New
DIBBS
SENSOR, MANIFOLD ABS
Solicitation # SPE7L5-26-Q-0160
The contract is for the procurement of seven units of a manifold absolute pressure sensor, identified by NSN 2990-01-525-3910 and manufacturer part number 161-1703 from Caterpillar Inc. This is a commercial off-the-shelf item classified as a restricted source requiring government engineering source approval. All deliveries must comply with DLA packaging standards per MIL-STD-2073-1E and marking requirements under MIL-STD-129, with no special marking needed. The item is subject to strict environmental restrictions prohibiting the use of Class I ozone-depleting chemicals, superseding any conflicting specification requirements unless authorized substitutions are approved. The contract enforces a firm fixed price with zero variance tolerance on quantity, and delivery is due 120 days after the award date, with FOB origin terms. Inspection and acceptance occur at the destination, and all shipments must be sent to the specified DLA distribution facility in New Cumberland, Pennsylvania. The contract incorporates technical and quality requirements from the DLA Master List, and configuration changes require formal engineering change proposals or variance requests due to its critical application status. Transportation and freight procedures follow DLA procedural notes C19 and C20, and the item is tied to purchase request 7017602937 with a required ship date of December 5, 2026.
Other Motor Vehicle Parts Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 14 days
View Details
NAICS: 332722
New
DIBBS
SCREW, CAP, HEXAGON H
Solicitation # SPE7L5-26-T-4655
The contract specifies the procurement of eight hexagon head cap screws with NSN 5305-01-609-3090, supplied by Fairbanks Morse, LLC under solicitation SPE7L5-26-T-4655, with a unit price of $8.00 per piece and a total value of $64.00. All deliveries are due within five days of contract issuance, with FOB origin terms, zero quantity variance allowed, and inspection and acceptance occurring at the destination. Compliance with MIL-STD-2073-1E packaging standards and MIL-STD-129 marking requirements is mandatory, including specific packaging codes, preservation methods, and palletization per DLA’s RP001 guidelines. The item must not be shipped via parcel post and must be sent by the fastest traceable means to the designated military receiving point in National City, California, with a required delivery date of July 24, 2026. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List, and sampling must adhere to MIL-STD-1916 or ASQ H1331 with zero non-conformances unless otherwise stated. Special marking is not required, and all items must be fully identified in accordance with government standards, including removal of prior government markings from non-accepted supplies.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 7 days
View Details
NAICS: 339999
New
DIBBS
Prohibited Materials Compliance (Hexavalent Chromium)All deliverables under this contract must comply with DFARS substance restrictions by being free of hexavalent chromium unless specific authorization is granted. The requirement applies to all materials and components supplied under this subcontract, with strict adherence mandated to ensure regulatory compliance and avoid contamination risks. The contract is issued under the NAICS code 339999 and is associated with the Department of Defense through the Land Supplier Operations Engines organization. The place of performance is specified as Anniston, Alabama, with a zip code of 36201-4199, indicating the physical location where deliverables are expected to be managed or delivered. The solicitation was posted on July 28, 2026, and responses are due by August 10, 2026, providing a tight window for suppliers to confirm compliance and submit their proposals. Any exceptions to the hexavalent chromium prohibition must be formally documented and approved in advance to meet contractual obligations.
All Other Miscellaneous Manufacturing

POSTED

1 day ago

DEADLINE

in 11 days
View Details
NAICS: 541512
New
DIBBS
Supply Chain Compliance and Cybersecurity for CUIThis contract requires strict adherence to the protection of Controlled Unclassified Information (CUI) and full compliance with the Defense Federal Acquisition Regulation Supplement (DFARS) cybersecurity standards. As a subcontract under the Department of Defense, the vendor must implement robust security controls to safeguard CUI throughout the supply chain, ensuring that all systems, networks, and processes handling such information meet NIST SP 800-171 requirements. The performance location is designated as Anniston, Alabama, with a delivery deadline of August 10, 2026, and the work falls under NAICS code 541512, indicating it pertains to computer systems design services. The subcontractor is accountable for maintaining continuous compliance, documenting security practices, and demonstrating readiness for audits or assessments by the government. Failure to meet these cybersecurity obligations may result in contract termination or penalties, making adherence not just a procedural formality but a fundamental condition of performance.
Computer Systems Design Services

POSTED

1 day ago

DEADLINE

in 11 days
View Details
NAICS: 561990
New
DIBBS
Compliant Packaging and Preservation ServicesThe contract requires the provision of military-compliant packaging, preservation, and dunnage services adhering to MIL-STD-2073-1 and associated specifications, ensuring all materials meet defense standards for protection, storage, and transport of military equipment. Work must be performed at the designated place of performance in Anniston, Alabama, with the zip code 36201-4199, and all solutions must support the operational readiness and longevity of defense assets under rigorous environmental and handling conditions. The solicitation is structured as a subcontract under the NAICS code 561990, indicating it falls within other support services, and is managed by the Department of Defense through the LAND SUPPLIER OPNS ENGINES organization. Interested parties must submit responses by the deadline of August 10, 2026, at 5:00 PM, following the requirements outlined in the official solicitation available through the DIBBS portal. The contract opportunity does not specify a set-aside type or organization type restrictions, making it broadly accessible to qualified vendors capable of fulfilling military-grade packaging and preservation standards. Participation requires detailed compliance with technical specifications, documented quality control processes, and the ability to deliver services consistent with Defense Logistics Agency protocols without the need for direct point-of-contact engagement prior to bid submission.
All Other Support Services

POSTED

1 day ago

DEADLINE

in 11 days
View Details
NAICS: 562910
New
DIBBS
Hazardous Materials Packaging and LabelingThe contract requires the proper packaging, preservation, and labeling of hazardous and radioactive materials in strict adherence to OSHA, MIL-STD, and DFARS regulations. All work must be performed to ensure compliance with federal safety and handling standards, particularly for materials that pose significant environmental or health risks. The scope emphasizes accurate documentation and secure containment to maintain regulatory integrity throughout the handling process. This is a subcontract under the NAICS code 562910, associated with the Department of Defense and managed by LAND SUPPLIER OPNS ENGINES. Performance is designated for the location in Anniston, Alabama, with a zip code of 36201-4199. The solicitation was posted on July 28, 2026, and responses are due by August 10, 2026. Bidders must be prepared to meet the rigorous compliance criteria and demonstrate proven experience in handling regulated hazardous and radioactive substances within military supply chain contexts.
Remediation Services

POSTED

1 day ago

DEADLINE

in 11 days
View Details
NAICS: 541380
New
DIBBS
First Article Testing (FAT) ServicesThe contract requires the performance and detailed documentation of First Article Testing for hose assemblies in accordance with defense quality standards, ensuring all components meet strict military specifications prior to production. This subcontract is under the NAICS code 541380 and is being managed by the Department of Defense through the LAND SUPPLIER OPNS ENGINES office, with performance specifically required at the location in Anniston, Alabama, ZIP code 36201-4199. All testing procedures must be meticulously recorded to demonstrate compliance and traceability as mandated by defense protocols. The solicitation was posted on July 28, 2026, with a firm deadline for responses set for August 10, 2026. Interested parties must submit their proposals before this date to be considered for award. The contract does not specify a set-aside classification and no point of contact details are provided within the data, requiring potential vendors to refer to the official DIBBS portal link for full submission instructions and additional requirements. This is a critical quality assurance task essential for verifying the suitability of hose assemblies in defense applications, necessitating precision, adherence to technical specifications, and comprehensive reporting.
Testing Laboratories and Services

POSTED

1 day ago

DEADLINE

in 11 days
View Details
NAICS: 332994
New
DIBBS
Nonmetallic Hose Assembly SupplyThe contract is for the supply of a nonmetallic hose assembly identified by NSN 4720013557640, requiring full compliance with military packaging, preservation, and labeling standards to ensure readiness and interoperability within defense logistics. The solicitation is issued as a subcontract under NAICS code 332994, which pertains to other fabricated metal product manufacturing, and is managed by the Land Supplier Operations Engines organization under the Department of Defense. Performance of the contract is designated for Anniston, Alabama, with ZIP code 36201-4199, indicating the delivery and fulfillment location tied to a specific military supply chain node. The opportunity was posted on July 28, 2026, with a firm response deadline of August 10, 2026, allowing potential subcontractors a limited window to submit proposals. The contract is accessible online via the DIBBS system, and all submissions must align with federal and military specifications governing material quality, documentation, and transport protocols to meet operational requirements.
Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

1 day ago

DEADLINE

in 11 days
View Details
NAICS: 336340
New
DIBBS
Fuel Tank Supply for Engine SystemsThe contract calls for the supply of ten fuel tanks specifically engineered for integration with engine systems, under a hardware procurement arrangement classified as a subcontract through a supply CLIN. The items must meet technical and operational standards required for military-grade engine compatibility and are designated under the NAICS code 336340, which corresponds to other engine equipment manufacturing. Performance is mandated to occur at Tracy, California, with the zip code 95304-5000, indicating the physical delivery point for the completed units. The solicitation was posted on July 28, 2026, and responses are due by July 31, 2026, creating a narrow three-day window for submission. The procuring organization is listed as LAND SUPPLIER OPNS ENGINES, operating under the Department of Defense, and the procurement is accessible through the DIBBS platform via the provided link. There is no set-aside designation specified, meaning the contract is open to any qualified supplier regardless of business size or status.
Motor Vehicle Brake System Manufacturing

POSTED

1 day ago

DEADLINE

in 1 day
View Details
NAICS: 541380
New
DIBBS
Radioactive Materials Marking (If Applicable)The contract requires the detection and labeling of components that contain radioactive materials exceeding thresholds of 0.002 microcuries per gram or 0.01 microcuries total per item, in accordance with MIL-STD-129 standards. This subcontract is issued under a Total Small Business Set-Aside, meaning only small businesses are eligible to respond, and it is classified under NAICS code 541380, which pertains to other scientific and technical consulting services. The posting date is July 28, 2026, with responses due by August 10, 2026, and the place of performance is specified as Tracy, California, with a ZIP code of 95304-5000. The contracting agency is the Department of Defense under Land Supplier Ops Engines, and the solicitation is accessible via the DIBBS platform. All work must ensure proper identification and compliance with federal radiation safety and labeling regulations as defined by the referenced military standard.
Testing Laboratories and Services

POSTED

1 day ago

DEADLINE

in 11 days
View Details
NAICS: 493190
New
DIBBS
Military-Compliant Packaging and PalletizationThe contract requires full compliance with military-standard packaging, unitizing, and palletization procedures as defined by MIL-STD-129, RP001, and ASTM D3951, ensuring all items are prepared for shipment to the Defense Logistics Agency warehouse to meet strict federal specifications. All work must be performed to guarantee readiness for military logistics handling, with emphasis on label compliance, unit load integrity, and material protection during transit. The contract is designated as a total small business set-aside under SBA guidelines, exclusively available to small businesses qualifying under FAR 19.5, and is classified under NAICS code 493190 for other support activities in warehousing and storage. Performance is required at the facility in Tracy, California, with a zip code of 95304-5000, and all bids must be submitted by August 10, 2026, with the solicitation having been released on July 28, 2026. The contract type is a subcontract, and participation is managed through the DIBBS platform under solicitation number SPE7L526T4654.
Other Warehousing and Storage

POSTED

1 day ago

DEADLINE

in 11 days
View Details
NAICS: 562910
New
DIBBS
Hazardous Materials Packaging and Labeling ServicesThe contract requires the provision of OSHA HAZCOM-compliant packaging, labeling, and Safety Data Sheet (SDS) submission services for hazardous materials linked to outboard engines, ensuring full adherence to federal hazard communication standards. All deliverables must meet the strict regulatory requirements for identifying, documenting, and marking hazardous substances used in or associated with these engines, with an emphasis on accurate and accessible information for worker safety. The work is to be performed in Tracy, California, with a ZIP code of 95304-5000, and all submissions must align with the latest HAZCOM guidelines and federal transportation and workplace safety protocols. This is a subcontract under a Total Small Business Set-Aside as defined by the Small Business Administration, with the NAICS code 562910 indicating waste collection and treatment services, though the scope here is limited to hazardous material compliance in a manufacturing context. The solicitation was posted on July 28, 2026, with a firm response deadline of August 10, 2026. The contracting office is under the Department of Defense, specifically LAND SUPPLIER OPNS ENGINES, and interested parties must respond through the official DIBBS portal using the provided RFQ link to ensure formal consideration.
Remediation Services

POSTED

1 day ago

DEADLINE

in 11 days
View Details