Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, September 2 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

INSERT, SCREW THREAD

Active
SPE4A0-26-T-4495Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This solicitation, issued by the Department of Defense Aviation Supply Chain ESOC Buys, is for the procurement of one screw thread insert under NSN 5325-01-447-3446. The contract requires delivery within five days after receipt of order, with the place of performance located in Milwaukee, Wisconsin. The agreement is subject to several technical and quality requirements, including DLA packaging standards, physical item marking, and the removal of government identification from non-accepted supplies. It also notes that covered defense information may apply. Interested parties must respond by September 4, 2026, in accordance with the guidelines set forth in the DLA Master List of Technical and Quality Requirements.

General Info

DoD procurement of one screw thread insert, delivery in Milwaukee by September 4, 2026.

Agency

Department Of Defense → AVIATION SUPPLY CHAIN ESOC BUYSView Agency

NAICS

332510 - Hardware ManufacturingView NAICS

Place of Performance

5110 W SILVER SPRING DRIVE, MILWAUKEE, WI, 53218-3343, USA

Set-Aside

NONE

Documents

(1)

SPE4A0-26-T-4495.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → AVIATION SUPPLY CHAIN ESOC BUYS
Contacts1 person available
OfficeUSA
Organization / Agency
Department Of Defense → AVIATION SUPPLY CHAIN ESOC BUYS
View Agency Profile
Office AddressUSA
Contacts
Danita Davis
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
INSERT,SCREW THREAD
INSERT,SCREW THREAD
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL IDENTIFICATION/BARE ITEM MARKING
ADEQUATE DATA FOR NSN/Part Number: 5325-01-447-3446 Quantity: 1 EA Purchase Request: 7018016641QTY: 1 Delivery: 5 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332510
New
DIBBS
RING, RETAINING
Solicitation # SPE4A5-26-Q-0713
This contract is for the procurement of 11 retaining rings, identified as part number 5156T34P01 by General Electric Company. The item is designated as a Navy Critical Safety Item and a critical application item, requiring strict adherence to quality and technical standards. Delivery is required within 144 days after the order is placed, with the shipping destination being DLA Distribution Cherry Point in North Carolina. The agreement mandates rigorous quality control, including inspection and acceptance at the origin and sampling methods based on MIL-STD-1916 or ASQ H1331. Compliance with SAE AS9100 higher-level quality requirements is required for manufacturers. Packaging and marking must follow MIL-STD-129 and DLA packaging requirements, and any requests for waivers or deviations must be approved by the DSC contracting officer. Item Unique Identification is not required for this specific order.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 8 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332510
New
DIBBS
BOLT, INTERNAL WRENC
Solicitation # SPE4A6-26-T-24EE
This contract is for the procurement of 200 internal wrenching bolts, identified as NSN 5306002065812 and part number MS20006-24. The items are classified as commercial critical application hardware and must be manufactured according to the current revision of the applicable part standards, specifically NASM20004 through NASM20024. Delivery is required within 5 days after the order, with the shipping destination being the Poland FMS Consolidation point in Huntsville, Alabama. The agreement mandates strict quality and technical compliance, including ISO 9001:2015 standards for manufacturers and CMMC Level 2 self-assessment for cybersecurity. Sampling and inspection will be conducted at the origin following MIL-STD-1916 or ASQ H1331, with specific gauging requirements for Class 3A and 3B threads. Packaging and marking must adhere to MIL-STD-2073-1E, MIL-STD-129, and DLA packaging requirements to ensure proper transport and identification.
ASC COMMODITIES DIVISION

POSTED

about 8 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
STUD, TURNLOCK FASTENER
Solicitation # SPE4A6-26-T-19CP
This solicitation is for the procurement of 683 turnlock fastener studs under solicitation number SPE4A6-26-T-19CP for the Department of Defense ASC Commodities Division. The items are identified as commercial products with a delivery requirement of 171 days after the order is placed. Performance is designated for Robins Air Force Base, and the contract falls under NAICS code 332510. The contract mandates strict adherence to DLA packaging requirements and technical quality standards, including specific guidelines for physical item marking and the removal of government identification from non-accepted supplies. Quality assurance will be managed through sampling methods such as MIL-STD-1916 or ASQ H1331, requiring zero non-conformances for acceptance unless otherwise specified.
ASC COMMODITIES DIVISION

POSTED

about 8 hours ago

DEADLINE

in 4 days
View Details
NAICS: 332510
New
DIBBS
RING, RETAINING
Solicitation # SPE4A6-26-T-24AA
This contract is for the procurement of 246 retaining rings under solicitation SPE4A6-26-T-24AA for the Department of Defense. The items are identified by NSN 5325-00-205-4727 and must adhere to technical drawings 19207 7709323. Delivery is required within 75 days, with a need date of November 19, 2026, shipping FOB Origin to the DLA Distribution facility in New Cumberland, Pennsylvania. The procurement is designated as a Critical Application Item and requires Tailored Higher Level Quality requirements, including source inspection. Quality assurance follows specific sampling methods such as MIL-STD-1916 or ASQ H1331, and packaging must comply with MIL-STD-2073-1E and RP001. While certificate of conformance procedures are authorized, Item Unique Identification is not required for this specific order.
ASC COMMODITIES DIVISION

POSTED

about 8 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
COVER, PROTECTIVE, DU
Solicitation # SPE7L1-26-T-04H6
Contract SPE7L1-26-T-04H6 is a Department of Defense solicitation for the procurement of protective covers, specifically part number 17765 from Leafield Marine Limited KG126, identified by NSN 5340993030710. The order consists of two line items totaling six units, with a required delivery date of August 25, 2026, and a delivery window of 10 days after receipt of order. Shipping is FOB Origin, with inspection and acceptance occurring at the destination, specifically the 2D Recon BN 2D Mardiv at Camp Lejeune, North Carolina. The contract mandates strict adherence to DLA packaging requirements, including MIL-STD-129 for labeling and RP001 for palletization. It prohibits the use of Class I ozone-depleting chemicals and requires compliance with CMMC Level 2 self-assessment and covered defense information standards. Technical and quality requirements are governed by the DLA Master List, and hazardous materials must be packaged according to TQ requirement IP025 or ASTM D3951 for non-hazardous items.
LAND SUPPLY CHAIN

POSTED

about 8 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332510
New
DIBBS
SHEET, METAL
Solicitation # SPE7M0-26-T-061Z
This solicitation, issued by the Department of Defense Maritime Supply Chain ESOC Buys, is for the procurement of 100 units of metal sheets under NSN 9535-01-348-3224. The contract requires delivery within five days after the order is placed, with the place of performance located in Pearl Harbor, Hawaii. The agreement mandates strict adherence to DLA technical and quality requirements, including specific packaging standards and the removal of government identification from non-accepted supplies. Suppliers must ensure that items are free of asbestos and that mercury or mercury-containing compounds are not intentionally added, except where functionally required and specified by NAVSEA. Additionally, all items must comply with MIL-STD-130N for the identification marking of U.S. military property.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 8 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332510
New
DIBBS
PIN, QUICK RELEASE
Solicitation # SPE4A6-26-T-19WN
This contract is for the procurement of 360 quick release pins, identified as NSN 5315-00-945-2497 and part number MS17984C310. The items are classified as commercial critical application hardware and must be manufactured according to the current revisions of NASM17984 and NAS1332 standards. The agreement specifies a delivery timeframe of 79 days after the order, with a required delivery date of December 24, 2026, and shipping destined for DLA Distribution Jacksonville. Quality assurance is governed by the DLA Master List of Technical and Quality Requirements, with inspection and acceptance occurring at the origin. Sampling must adhere to MIL-STD-1916 or ASQ H1331, requiring zero non-conformances for acceptance. Packaging must comply with ASTM D3951 and MIL-STD-129, while palletization must follow the RP001 DLA packaging requirements. The contract allows for no quantity variance, meaning exactly 360 units must be delivered.
ASC COMMODITIES DIVISION

POSTED

about 8 hours ago

DEADLINE

in 4 days
View Details
NAICS: 332510
New
DIBBS
SPACER, RING
Solicitation # SPE4A7-26-T-676Y
This solicitation, issued by the Department of Defense under the ASC Supplier Oper AE and AF Div, is for the procurement of 65 ring spacers identified by NSN 5365-01-497-4885. The contract requires delivery within 171 days after order and falls under NAICS code 332510. Performance is designated for New Cumberland, Pennsylvania, with a response deadline of August 31, 2026. The agreement is subject to stringent technical and quality requirements, including DLA packaging standards and inspection at origin. Notably, the contract involves covered defense information and requires CMMC Level 2 certification. Due to the nature of the technical data, the item is subject to ITAR and EAR export controls, meaning access is restricted to approved contractors with US/Canada Joint Certification Program certification and completed export-control training.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 8 hours ago

DEADLINE

in 4 days
View Details
NAICS: 332510
New
DIBBS
SHIM
Solicitation # SPE4A5-26-T-394F
This contract is for the procurement of 30 units of shims, identified by NSN 5365005270413 and part number 507311-5, for the Department of Defense. The delivery is required within 469 days, with a need ship date of December 18, 2027. Shipping is FOB Origin, and the items are to be delivered to Arizona Industries for the Blind in Phoenix, Arizona. The agreement mandates strict adherence to DLA technical and quality requirements, including specific packaging standards under ASTM D3951 and MIL-STD-129, and palletization per RP001. Quality assurance is governed by MIL-STD-1916 or ASQ H1331 sampling plans, and the contractor must comply with CMMC Level 2 self-assessment and covered defense information regulations. Item Unique Identification is not required for this specific order.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 8 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
STUD ASSEMBLY, TURNL
Solicitation # SPE4A6-26-T-23ZJ
This solicitation, issued by the ASC Commodities Division of the Department of Defense, is for the procurement of 100 units of Turnlock Fastener Stud Assemblies under part number 5325-00-646-8088. The contract requires delivery within 20 days after the order is placed and specifies that the place of performance is Huntsville, Alabama. The agreement mandates strict adherence to DLA packaging requirements and technical quality standards, including the removal of government identification from non-accepted supplies and specific physical marking per MIL-STD-130N. Quality assurance will be managed through zero-based sampling plans according to MIL-STD-1916 or ASQ H1331, with specific verification levels assigned to critical, major, and minor attributes.
ASC COMMODITIES DIVISION

POSTED

about 8 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
STUD, TURNLOCK FASTENER
Solicitation # SPE4A6-26-T-24DW
This contract is for the procurement of two turnlock fastener studs under solicitation SPE4A6-26-T-24DW for the Department of Defense ASC Commodities Division. The items are identified by NSN 5325-00-536-7877 and must adhere to technical specifications outlined in reference drawing 76301 3M302 Revision N. Approved manufacturers and part numbers include The Boeing Company, Space-Lok Inc., and Howmet Global Fastening Systems. The delivery requirement is set for 20 days after order, with a required delivery date of June 1, 2026. Shipping is FOB Origin and destined for the ROKAF LC Consolidated Supply Depot in Daegu, South Korea. Compliance is required for several DLA technical and quality standards, including MIL-STD-130N for identification marking, MIL-STD-2073-1E for packaging, and RP001 for palletization. There is no shelf life requirement for this material.
ASC COMMODITIES DIVISION

POSTED

about 8 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
RING, RETAINING
Solicitation # SPE4A6-26-T-20EU
This contract, identified by solicitation number SPE4A6-26-T-20EU, is a procurement for six retaining rings for valves. Issued by the Defense Logistics Agency ASC Commodities Division, the requirement falls under NAICS code 332510 and specifies a delivery timeline of 164 days after the delivery order date. The procurement is subject to strict technical and quality requirements maintained in the DLA Master List, including specific DLA packaging, physical identification, and bare item marking protocols. Compliance with rigorous security and quality standards is mandatory, including Cybersecurity Maturity Model Certification (CMMC) Level 2 and the protection of covered defense information. The contract involves export-controlled technical data subject to ITAR or EAR regulations, requiring contractors to hold approved US/Canada Joint Certification Program credentials and complete specific training for data handling. Quality assurance is governed by specific sampling methods such as MIL-STD-1916 or ASQ H1331, with defined verification levels for critical, major, and minor attributes to ensure product integrity.
ASC COMMODITIES DIVISION

POSTED

about 8 hours ago

DEADLINE

in 4 days
View Details

More opportunities from Department Of Defense → AVIATION SUPPLY CHAIN ESOC BUYS

Same awarding agency

NAICS: 335932
New
DIBBS
TAPE, INSULATION, ELECTR
Solicitation # SPE4A0-26-T-4514
This contract is for the procurement of one unit of electrical insulation tape, identified by NSN 5970-01-588-5080 and part number 3304920 from Olympus America Inc. The item is designated as a critical application item with a shelf life of 18 months. Delivery is required within 5 days after order, with the original required delivery date set for August 24, 2026. The shipment is to be delivered FOB origin to Fairchild AFB in Washington using the fastest traceable means. Quality assurance is governed by strict sampling methods according to MIL-STD-1916 or ASQ H1331, requiring zero non-conformances for acceptance. The contract mandates specific packaging and marking standards per MIL-STD-2073-1E and MIL-STD-129, including a Type II shelf life marking. Inspection and acceptance are to be conducted at the origin, and the agreement incorporates the DLA Master List of Technical and Quality Requirements.
Noncurrent-Carrying Wiring Device Manufacturing

POSTED

about 8 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332999
New
DIBBS
SPACER, PLATE
Solicitation # SPE4A0-26-T-4494
This contract is for the procurement of one spacer plate, identified by NSN 5365015755139 and Daimler Truck North America part number WWS 13303-3421. The solicitation, numbered SPE4A0-26-T-4494, is issued by the Department of Defense Aviation Supply Chain ESOC Buys. Delivery is required within five days after order, with a required delivery date of August 25, 2026. The shipment is to be delivered FOB Origin to CPL Gordon M Craig USARC in Brockton, Massachusetts, using the fastest traceable means. The agreement mandates strict adherence to DLA packaging and marking requirements, specifically MIL-STD-129 and MIL-STD-2073-1E. Quality assurance and sampling must comply with MIL-STD-1916 or ASQ H1331, with a zero-nonconformance requirement for acceptance. Technical and quality requirements are governed by the DLA Master List, and the contract specifies a zero percent quantity variance. Inspection and acceptance will take place at the point of origin.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 8 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
WASHER, FLAT
Solicitation # SPE4A0-26-T-4504
This contract is for the procurement of four flat washers, identified by NSN 5310-00-469-9202. The items must be manufactured from Grade A Bronze per MIL-M-16576, with specifications of a 1.000 inch outer diameter, 0.750 inch inner diameter, and 0.062 inch thickness. The order is subject to strict quality and sampling standards, including MIL-STD-1916 or ASQ H1331, and requires adherence to MIL-STD-130N for identification marking. Delivery is required within five days after order, with the shipping point and acceptance point both set at the origin. Packaging and palletization must comply with MIL-STD-2073-1E and DLA packaging requirements. The items are to be shipped via the fastest traceable means to the MG Oliver Otis Howard USARC in Auburn, Maine. Because casting or forging may be required for manufacture, the contract notes that special tooling may be necessary and provides guidance for requesting assistance through DLA channels.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 8 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
SCREW TE 1.4-20 UNC
Solicitation # SPE4A0-26-T-4503
This contract is for the procurement of two units of SCREW TE 1.4-20 UNC, identified by NSN 5305014952105 and part number 01.0001.0093. The order is issued by the Department of Defense Aviation Supply Chain ESOC Buys under solicitation number SPE4A0-26-T-4503. Delivery is required within five days of order, with the final destination being the USALRCTR at Fort Eustis, Virginia. The supplier must adhere to DLA Master List technical and quality requirements, including specific packaging standards under ASTM D3951 and MIL-STD-129. Quality assurance and sampling must comply with MIL-STD-1916 or ASQ H1331, ensuring zero non-conformances in sample lots. Shipping must be handled via the fastest traceable means, excluding parcel post, with a required delivery date of August 21, 2026.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 8 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332991
New
DIBBS
BEARING, WASHER, THRUST
Solicitation # SPE4A0-26-T-4497
This contract is for the procurement of one thrust washer bearing, identified by NSN 3120-01-385-4627 and part number 9306-46 from Highland Engineering, Inc. The order is managed by the Department of Defense Aviation Supply Chain ESOC Buys under solicitation number SPE4A0-26-T-4497. Delivery is required within five days after receipt of the order, with a required delivery date of August 21, 2026. The agreement specifies that the item must be delivered FOB Origin and will be inspected and accepted at the destination, which is Fort Campbell, Kentucky. Packaging must comply with ASTM D3951 and MIL-STD-129, while adhering to DLA packaging requirements and technical quality standards. The shipment must be sent via the fastest traceable means, and the contractor is prohibited from using parcel post.
Ball and Roller Bearing Manufacturing

POSTED

about 8 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
HOT BONDER-CONTROLL
Solicitation # SPE4A0-26-T-4512
This contract, identified as SPE4A0-26-T-4512, is for the procurement of a Hot Bonder-Control aircraft single zone composite repair set, part number HCS9000B, manufactured by Heatcon Composite Systems. The order consists of two separate line items, each for a quantity of one unit under NSN 4920014624658. Delivery is required within five days after receipt of order, with required delivery dates set for August 20 and August 21, 2026. Shipments are destined for Fairchild AFB in Washington and Fort Hood TX, with delivery terms set as FOB Origin and inspection and acceptance occurring at the destination. The contractor is responsible for notifying the government of any configuration or design changes to the commercial off-the-shelf items. Packaging and marking must adhere to MIL-STD-2073-1E and MIL-STD-129, with specific requirements to follow DLA packaging standards and avoid the use of plastics for wrapping or cushioning where possible. Quality assurance and sampling will be conducted according to MIL-STD-1916 or ASQ H1331. Item Unique Identification is not required for this request.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 8 hours ago

DEADLINE

in 8 days
View Details
NAICS: 333613
New
DIBBS
LINK, SPLINED
Solicitation # SPE4A0-26-T-4499
This contract is for the procurement of two splined links, identified by NSN 3040012788752 and Lockheed Martin part number 5497626-6. The order is issued by the Department of Defense Aviation Supply Chain under solicitation SPE4A0-26-T-4499, with a required delivery date of August 24, 2026, and a delivery window of five days after receipt of order. The items are to be shipped FOB destination to the USS Carney DDG 64. The agreement mandates strict adherence to DLA technical and quality requirements, including specific packaging and marking standards per MIL-STD-129 and MIL-STD-2073-1E. A critical environmental restriction prohibits the intentional addition of mercury or mercury-containing compounds to the hardware, with limited exceptions for specific functional components. Quality assurance will be managed through sampling methods aligned with MIL-STD-1916 or ASQ H1331, requiring zero non-conformances for acceptance.
Mechanical Power Transmission Equipment Manufacturing

POSTED

about 8 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334419
New
DIBBS
WIRING HARNESS, BRAN
Solicitation # SPE4A0-26-T-4511
This contract is for the procurement of one wiring harness, identified by NSN 5995015778569 and HDT Expeditionary Systems Inc part number 178K0102-1. The order is managed under solicitation number SPE4A0-26-T-4511 for the Department of Defense Aviation Supply Chain. Delivery is required within five days after the order is placed, with the shipment designated as FOB Origin and the final destination located at Prince Sultan Air Base in Saudi Arabia. The supplier must adhere to strict packaging and marking standards, including MIL-STD-2073-1E and MIL-STD-129, as well as DLA packaging requirements specified in RP001. Inspection and acceptance will take place at the destination. The contract also incorporates specific technical and quality requirements via the DLA master list and mandates the removal of government identification from any non-accepted supplies.
Other Electronic Component Manufacturing

POSTED

about 8 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332618
New
DIBBS
KEY, MACHINE
Solicitation # SPE4A0-26-T-4513
This contract, identified as solicitation SPE4A0-26-T-4513, is for the procurement of one machine key, part number N0304 from The Gorman-Rupp Company, under NSN 5315015585100. The acquisition is managed by the Department of Defense Aviation Supply Chain ESOC Buys, with a required delivery date of August 24, 2026. Delivery is specified as FOB Origin, with a delivery window of five days after order. The item must be delivered to Fort Wainwright, Alaska, and must adhere to strict technical and quality requirements, including DLA packaging standards RP001 and marking standards MIL-STD-129. Inspection and acceptance will take place at the destination. The contract specifies a zero percent quantity variance and requires the removal of government identification from any non-accepted supplies per requirement RQ011.
Other Fabricated Wire Product Manufacturing

POSTED

about 8 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334419
New
DIBBS
CABLE ASSEMBLY, RADI
Solicitation # SPE4A0-26-T-4491
This solicitation, issued by the Department of Defense Aviation Supply Chain ESOC Buys, is for the procurement of one radio frequency cable assembly, identified by NSN 5995-01-592-3978. The contract requires delivery within five days after receipt of order and is governed by specific technical and quality requirements outlined in the DLA Master List. The agreement includes strict compliance with covered defense information and export control regulations under ITAR and EAR, meaning technical data cannot be exported or disclosed to foreign nationals without prior authorization. Contractors must possess an approved US/Canada Joint Certification Program certification and complete required training to access export-controlled data. Additionally, the contract specifies requirements for packaging, configuration change management, and the removal of government identification from non-accepted supplies, though item unique identification is not required.
Other Electronic Component Manufacturing

POSTED

about 8 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335311
New
DIBBS
STATION, FIRE ALARM,
Solicitation # SPE4A0-26-T-4488
This contract is for the procurement of one fire alarm station, identified as a commercial off the shelf item with NSN 6350-01-683-2607 and part number NBG-12L. The requirement is managed by the Department of Defense Aviation Supply Chain ESOC Buys under solicitation number SPE4A0-26-T-4488. Delivery is required within five days of order, with the item shipped FOB Origin to the Distribution Management Office in Jacksonville, Florida. The contract mandates strict adherence to DLA packaging and marking requirements, specifically MIL-STD-129 and MIL-STD-2073-1E. Quality assurance and sampling must comply with MIL-STD-1916 or ASQ H1331, utilizing a zero based sampling plan. The agreement also incorporates specific technical and quality requirements regarding the removal of government identification from non-accepted supplies and the physical marking of bare items.
Power, Distribution, and Specialty Transformer Manufacturing

POSTED

about 8 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335311
New
DIBBS
CABLE ASSEMBLY, SPEC
Solicitation # SPE4A0-26-T-4518
This contract is for the procurement of cable assemblies under solicitation SPE4A0-26-T-4518 for the Department of Defense. It consists of two line items, each for one unit of NSN 6150016630901, with delivery required within five days. The items are to be delivered FOB Origin, with shipping destinations located at Joint Base Lewis McChord, Washington, and Fort Bragg, North Carolina. The agreement mandates strict adherence to quality and packaging standards, including MIL-STD-129 for marking, MIL-STD-2073-1E for packaging, and specific DLA master list technical requirements. Sampling must follow MIL-STD-1916 or ASQ H1331, with a zero-defect acceptance policy for sample lots. The required delivery dates are set for August 24 and August 27, 2026.
Power, Distribution, and Specialty Transformer Manufacturing

POSTED

about 8 hours ago

DEADLINE

in 8 days
View Details