Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Installation, Setup, and Technical Training for PFT Equipment

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract outlines the on-site installation, calibration, IT integration, and comprehensive technical training for clinical staff related to pulmonary function testing equipment. The work will be performed to ensure the system is fully operational, properly calibrated, and seamlessly integrated into existing healthcare IT infrastructure, with all clinical personnel receiving hands-on instruction in daily operation, routine maintenance, and troubleshooting procedures. This subcontract is designated as a Small Business Set Aside under SBA guidelines, reflecting a commitment to contracting with small businesses, and falls under the NAICS code 541330 for scientific and technical consulting services. The contracting entity is the Department of Veterans Affairs through the 247-NETWORK Contract Office 7, and the services are intended to support VA healthcare facilities in delivering accurate respiratory diagnostics.

General Info

On-site installation, calibration, IT integration, and training for pulmonary testing equipment under Small Business Set Aside.

Agency

Department Of Veterans Affairs → 247-NETWORK Contract Office 7 (36C247)View Agency

NAICS

541330 - Engineering ServicesView NAICS

Place of Performance

GA

Set-Aside

SBA

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 28

subcontract

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Veterans Affairs → 247-NETWORK Contract Office 7 (36C247)

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Veterans Affairs → 247-NETWORK Contract Office 7 (36C247)

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

On-site installation, calibration, IT integration, and training for clinical staff on operation and maintenance of the PFT machine.

Similar Contracts

Same NAICS industry code

Construction Management Services IDIQThe Port of Seattle is seeking Construction Management (CM) services through an Indefinite-Delivery, Indefinite-Quantity (IDIQ) contract to support a range of major construction projects across its facilities. These services will encompass full lifecycle support including planning, design, construction, and closeout phases for projects delivered via Design Build, Progressive Design Build, and other alternative delivery methods. The contractor will be responsible for ensuring adherence to authorized schedules, budgets, and quality standards while providing expert oversight and coordination throughout each project’s duration. The scope is broad and may include multiple concurrent initiatives, requiring flexibility and deep technical expertise in managing complex infrastructure efforts. The NAICS code for this opportunity is 541330, reflecting its focus on architectural and engineering services. The contract is forecasted for release and is managed by the Port of Seattle’s Construction Management division, with primary contact Hala Rabbo available for inquiries and Ann Davidson serving as the Project Manager. All performance will occur at Port of Seattle facilities, though no specific location is detailed. Interested parties can access further information through the official solicitation portal linked by the agency, and all proposals must align with the Port’s objectives to deliver high-quality, on-time, and within-budget construction outcomes.

Construction Management

POSTED

about 23 hours ago

DEADLINE

Retro-Commissioning, TAB, Controls, and Regulatory Support IDIQThe consultant will deliver retro-commissioning, test/adjust/balance, controls, and regulatory support services across Seattle-Tacoma International Airport’s facilities and infrastructure systems, ensuring optimal performance in a continuous 24/7/365 operational environment. The scope includes identifying and correcting deficiencies in mechanical, HVAC, plumbing, lighting, Direct Digital Controls, smoke control, and fire protection systems to enhance efficiency, reliability, comfort, and lifespan while maintaining compliance with safety and regulatory standards. All work will be executed through Service Directives and closely coordinated with Aviation Facilities and Infrastructure to meet defined deliverables, with an emphasis on minimizing disruption to airport operations. The contract is structured as an IDIQ vehicle under NAICS code 541330, issued by the Port of Seattle’s Aviation Facilities and Infrastructure division. Primary point of contact is Jason Gates, with Jim Farris serving as project manager, both reachable through designated phone and email channels. The solicitation was posted on July 29, 2026, and performance will occur entirely at the airport location, though specific city and state details are not provided. No set-aside type is designated, and the procurement is listed as a forecast with no solicitation number yet assigned.

Aviation Facilities & Infrastructure

POSTED

about 23 hours ago

DEADLINE

Airport Consulting Services-Design/Engineering/Construction

Solicitation # PE-77099-NONST-2027-000000006

Early County Government in Georgia is soliciting consulting services for airport design, engineering, and construction activities under solicitation number PE-77099-NONST-2027-000000006, with responses due by August 28, 2026. The contract is intended to secure professional expertise to support the planning and development of airport infrastructure, though specific project scope details are not provided in the posting. The solicitation is classified under a state and local government (SLED) procurement, with no set-aside designation indicated, and the point of contact for inquiries is Stephanie Chandler, reachable via email at stephanie.chandler@earlycounty.org. All work is expected to be performed in Georgia, and interested parties must submit proposals through the official state procurement portal prior to the deadline.

Early County Government

POSTED

DEADLINE

Engineering Consulting for Water InfrastructureThe contract seeks specialized engineering consulting services focused on drinking water infrastructure projects and adherence to water and wastewater permitting regulations, with performance centered in Boston, Massachusetts, at the 02114 zip code. The solicitation is categorized as a subcontract under NAICS code 541330, indicating it involves architectural, engineering, and related services, and is issued by the Bureau of Water Resources under the Massachusetts agency framework. Interested parties must submit responses by the deadline of August 31, 2026, at 10:00 PM Eastern Time, following the posting date of July 29, 2026. The contract does not specify a set-aside designation or organization type requirements, and while the primary point of contact information is omitted, the tender can be accessed via the provided CommBuys link for further details and submission guidelines.

BWR00 - Bureau of Water Resources

POSTED

DEADLINE

in about 1 month

DEP-BWR-RFQ-2027-DWINSA-PRF77 CAT D5 & F

Solicitation # BD-27-1045-BWR00-BWR01-131881

The Massachusetts Department of Environmental Protection, through the Bureau of Water Resources, is soliciting pre-qualified consulting engineering firms under the statewide PRF77 contract categories D5 (Permitting and Reporting – Water and Wastewater) and F (Environmental Strategy) to deliver specialized engineering services related to drinking water infrastructure. The solicitation, identified as BD-27-1045-BWR00-BWR01-131881, was posted on July 29, 2026, with a response deadline of August 31, 2026, and is open to all eligible firms through the COMMBUYS electronic procurement platform. The work will be performed in Boston, Massachusetts, with the primary point of contact being Casey McLaughlin as the Purchaser. The NAICS code 541330, which classifies architectural, engineering, and related services, governs the procurement, and the services sought align with environmental strategy and water infrastructure permitting needs. Offers must be submitted electronically and include mandatory attachments such as the Bidders’ Response Form, Standard Contract Form, Certificate of Non-Collusion, Business Reference, and other supporting documents outlined in the Request for Response. No formal contract type such as IDIQ or FFP is specified, and while the place of performance is defined as Boston, no fixed period of performance, delivery schedule, or FOB terms are detailed. The contract does not include explicit evaluation factors, clause language from the Federal Acquisition Regulation, or special requirements such as key personnel, security clearances, or option periods. The bill-to address for payments is 1 Ashburton Place, Boston, MA 02108, and invoices are expected to follow the COMMBUYS submission process without the use of systems like WAWF or IPP. No pricing data, estimated contract value, or CLIN information is available in the solicitation, and while socioeconomic certifications and Unique Entity IDs are referenced as potential requirements, no offeror submissions or completed representations are documented. All responses must comply with procedural instructions, including the prohibition of zipped files unless permitted, and adherence to the RFR’s format and submission guidelines.

BWR00 - Bureau of Water Resources

POSTED

DEADLINE

in about 1 month

26RFSQ71 Small Roadway and Drainage Engineering Services

Solicitation # 26RFSQ71

Williamson County is seeking qualified engineering firms to provide services supporting small drainage and roadway projects under multiple county programs including the Road Bond Program, Road and Bridge Division, Development Services & Drainage Division, and County Facilities. The county anticipates selecting approximately three firms to assist staff in the planning, design, and execution of these projects, though the Commissioners Court retains the discretion to choose more or fewer firms based on need and evaluation. Firms must submit their qualifications in response to solicitation number 26RFSQ71, with submissions due by August 18, 2026. The procurement is open to all eligible firms without set-aside restrictions and will be administered by the county’s Purchasing Department based in Georgetown, Texas. Primary points of contact for inquiries are Fernando Ramirez and Joy Simonton, with Kerstin Hancock serving as deputy purchasing agent. All inquiries and proposals should be directed through the official Texas SmartBuy portal.

WILLIAMSON COUNTY

POSTED

DEADLINE

Supply Chain Compliance & Documentation ManagementThe contract titled Supply Chain Compliance & Documentation Management is a small business set-aside subcontract under the NAICS code 541330, issued by the ASC Commodities Division of the Department of Defense. It requires comprehensive documentation and compliance support specifically tailored to defense supply chain regulations, with a focus on tracking the phase-out of non-compliant materials, maintaining detailed traceability records, and accurately processing shipping instructions. The work is critical to ensuring adherence to federal defense standards and maintaining the integrity of the supply chain from origin to delivery. Response submissions are due by August 11, 2026, with the solicitation posted on July 29, 2026, and full performance will be conducted within the Department of Defense’s operational framework. Only small businesses qualified under the SBA’s Total Small Business Set-Aside provisions are eligible to respond, reinforcing the government’s commitment to supporting small business participation in defense-related contracts.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Quality Assurance and Inspection ServicesThe contract for Quality Assurance and Inspection Services requires an independent third-party to conduct inspections using zero-based sampling plans to ensure strict adherence to military quality standards and zero defect requirements. This approach eliminates traditional statistical sampling methods in favor of comprehensive verification, ensuring every item meets uncompromising defense specifications without tolerance for nonconformance. The work is performed under a subcontract arrangement, with the Department of Defense’s ASC Commodities Division as the overseeing agency, and is governed by NAICS code 541330, indicating specialized professional, scientific, and technical services in quality control and inspection. The solicitation was posted on July 29, 2026, with a response deadline of August 28, 2026, providing potential vendors a four-week window to submit proposals. Performance location details are not specified, but the service is expected to support defense-related quality assurance across unspecified operational or logistical hubs. There is no set-aside designation, meaning the contract is open to all eligible contractors regardless of size or status. All proposals must be submitted via the DIBBS portal using the provided link, and the inspection protocol must be fully aligned with military objectives, emphasizing absolute compliance, traceability, and documentation integrity.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Quality Assurance and Inspection ServicesThe contract requires comprehensive quality assurance and inspection services to ensure compliance with military and industry standards for product acceptance. This includes performing first article inspections, in-process quality checks, and final acceptance sampling according to MIL-STD-1916 or ASQ H1331, with strict acceptance quality levels of 0.1 for critical defects, 1.0 for major defects, and 4.0 for minor defects. All inspection activities must be thoroughly documented with detailed test reports and formal non-conformance records to maintain traceability and accountability throughout the production lifecycle. The work is scoped as a subcontract under a total small business set-aside designation, specifically targeting SBA-certified small businesses, and is classified under NAICS code 541330 for architectural and engineering activities. The solicitation was posted on July 29, 2026, with responses due by August 12, 2026, and is managed by the ASC Commodities Division under the Department of Defense. The place of performance and specific office address details are not provided, but all work must be executed in accordance with the referenced standards and reporting requirements outlined in the technical specifications.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Lincoln Avenue Bridge Preventive Maintenance Project

Solicitation # 20260728039

The City of San Rafael is soliciting bids for the Lincoln Avenue Bridge Preventive Maintenance Project under solicitation number 20260728039, with a response deadline of August 14, 2026, at 11:00 PM Pacific Time. The project, identified by federal number BPMP-5043(051), falls under NAICS code 541330 and is categorized as a state, local, or educational government procurement. Work is to be performed exclusively in San Rafael, California, with no sub-contracting or set-aside provisions specified. All bids must be submitted through the BidAmerica portal by the stated deadline, and inquiries should be directed to Adeel Shaikh, the primary point of contact, via email at adeel.shaikh@cityofsanrafael.org or phone at 415-725-9264. The contract award will be made following the evaluation of compliant proposals submitted prior to the deadline.

City of San Rafael

POSTED

DEADLINE

Construction Management (CM) & Constructability Review (CR) Services For The North Park| Mid-City Howard Bikeway Project

Solicitation # 20260728034

The contract invites bids for Construction Management and Constructability Review services for the North Park | Mid-City Howard Bikeway Project in San Diego, California, under solicitation number 20260728034. The work is being procured by the San Diego Association of Governments (SANDAG), a SLED-level agency, with a North American Industry Classification System code of 541330, indicating professional, scientific, and technical services related to architectural and engineering activities. The solicitation was posted on July 29, 2026, and responses are due by August 22, 2026. Performance of the contract will occur entirely within San Diego, California, focusing on ensuring the bikeway project’s design is feasible, efficient, and compliant with construction standards through expert review and management. Paola Neira of SANDAG serves as the primary point of contact, reachable via phone at 619-595-5308 or email at paola.neira@sandag.org for inquiries related to the bid. There is no set-aside designation for small businesses or other categories, meaning the opportunity is open to all eligible vendors. The bid amount is listed as $16, which may reflect a nominal fee for accessing the solicitation or a placeholder value, as the actual contract value is not specified. Interested parties must access the full solicitation and submit responses through the provided BidAmerica portal link.

SAN DIEGO ASSOCIATION OF GOVERNMENTS (SANDAG)

POSTED

DEADLINE

Peer Review and QA/QC ServicesThe contract seeks qualified parties to perform independent peer reviews at the 50 percent and 90 percent design milestones to ensure quality, regulatory compliance, and technical accuracy of engineering and design deliverables. These reviews are critical to validating that project designs meet applicable standards and specifications before advancing to subsequent phases. The work is structured as a subcontract under the NAICS code 541330 for architectural and engineering services, and will be conducted in support of the Massachusetts Department of Public Works. Proposals must be submitted by August 17, 2026, with the opportunity posted on July 29, 2026. The place of performance and full agency details are not specified in the posted data, but the work is expected to support public infrastructure projects administered by the Massachusetts agency.

PUBLICWORKS - Department of Public Works

POSTED

DEADLINE

More opportunities from Department Of Veterans Affairs → 247-NETWORK Contract Office 7 (36C247)

Same awarding agency

Power Cord and Ancillary Component SupplyThe contract is a Small Business Set Aside for the supply of a 10-foot power cord designed specifically for compatibility with the SiteRite 9 Ultrasound System, classified under NAICS code 335931 for Appliance, Component, and Accessory Manufacturing. It was posted on July 29, 2026, with a response deadline of August 3, 2026, at 5:00 a.m., and is structured as a subcontract under the Department of Veterans Affairs through the 247-NETWORK Contract Office 7. Performance of the contract is required to occur at a location with a zip code of 35233, though the exact city and state are not specified. The solicitation is open only to small business concerns as defined by the Small Business Administration, ensuring preference for eligible small businesses in the award process. The contract is accessible via a public SAM.gov portal link for further details and submission.

Current-Carrying Wiring Device Manufacturing

POSTED

DEADLINE

On-Site Clinical and Biomedical TrainingThe contract entails the delivery of on-site training for clinical and biomedical staff focused on the operation, safety protocols, and troubleshooting of the SiteRite 9 system. Training must be conducted at a location with a zip code of 35233, ensuring that personnel receive hands-on instruction tailored to the specific needs of the facility. The work is structured as a subcontract under a Small Business Set Aside designation, meaning only eligible small businesses can compete for this opportunity. The North American Industry Classification System code for this effort is 611430, which corresponds to other schools and instruction, reinforcing the educational nature of the service. The solicitation was posted on July 29, 2026, with a response deadline of August 3, 2026, giving potential vendors a short window to submit proposals. The contracting office is the 247-NETWORK Contract Office 7 under the Department of Veterans Affairs, indicating this training supports VA healthcare operations and infrastructure.

Professional and Management Development Training

POSTED

DEADLINE

On-Site Installation and Testing ServicesThe contract requires on-site installation, calibration, and operational testing of the SiteRite 9 Ultrasound System at the Birmingham VA Medical Center, located in zip code 35233. The work must be performed in accordance with technical specifications and industry standards to ensure the system functions properly for clinical use. The solicitation is designated as a Small Business Set Aside under NAICS code 811212, indicating that only qualified small businesses are eligible to respond. The opportunity was posted on July 29, 2026, and proposals are due by August 3, 2026, at 5:00 a.m. The contract falls under the 247-NETWORK Contract Office 7 within the Department of Veterans Affairs, with all services required to be completed at the specified VA facility.

Computer and Office Machine Repair and Maintenance

POSTED

DEADLINE

Medical-Grade Roll Stand SupplyThe contract is for the supply of a mobile, durable roll stand specifically engineered to be compatible with the SiteRite 9 Ultrasound System, designed to enhance clinical mobility and ergonomic efficiency in healthcare settings. The requirement is for a medical-grade product that ensures reliable performance under demanding clinical conditions, with focus on durability, ease of movement, and seamless integration with the ultrasound device. The roll stand must meet stringent medical standards to support safe and effective patient care across various clinical environments. This is a subcontract under a Small Business Set Aside designation, meaning only qualified small businesses are eligible to respond. The North American Industry Classification System code 339112 applies, indicating the product falls under surgical and medical instrument manufacturing. The solicitation was posted on July 29, 2026, with a firm response deadline of August 3, 2026, at 5:00 AM. Performance is expected to occur in the area identified by zip code 35233, managed by the Department of Veterans Affairs through the 247-NETWORK Contract Office 7. The contract is part of a broader effort to modernize mobile diagnostic equipment infrastructure within VA facilities.

Surgical and Medical Instrument Manufacturing

POSTED

DEADLINE

Vascular Probe SupplyThe contract is for the supply of a SiteRite 9-compatible vascular probe, specifically the CueT Linear model, designed for use in vascular imaging procedures. This subcontract is set aside entirely for small businesses under the SBA program, indicating that only eligible small business concerns can bid. The solicitation was posted on July 29, 2026, with a response deadline of August 3, 2026, at 5:00 AM, leaving a limited window for submissions. The North American Industry Classification System code 334510 categorizes this procurement under the manufacturing of medical, dental, and veterinary instruments and supplies, aligning with the technical nature of the probe. The contract is managed by the Department of Veterans Affairs through its 247-NETWORK Contract Office 7, with performance expected to occur in an unspecified location with a zip code of 35233, which corresponds to a region in Alabama. The procurement is structured to ensure the delivery of a specialized medical device compliant with the SiteRite 9 platform, critical for accurate and reliable vascular imaging in clinical settings.

Electromedical and Electrotherapeutic Apparatus Manufacturing

POSTED

DEADLINE

Medical Ultrasound Equipment SupplyThe contract involves the supply of a fully functional SiteRite 9 Ultrasound System equipped with a touchscreen display, high-resolution imaging capabilities, needle visualization technology, and dual power support, along with all standard accessories required for immediate operational use. This equipment is intended for medical imaging applications and must meet specified technical performance standards to ensure compatibility and reliability in clinical environments. The solicitation is structured as a subcontract under a Small Business Set Aside designation, meaning only small businesses are eligible to respond, and it falls under the NAICS code 334510 for Medical Equipment and Supplies Manufacturing. The Department of Veterans Affairs, through the 247-NETWORK Contract Office 7, is the overseeing agency, with the place of performance located in a facility with zip code 35233. Bidders must submit their proposals by August 3, 2026, at 5:00 a.m., following the posting date of July 29, 2026. All responses must comply with federal procurement guidelines and demonstrate the ability to deliver a complete, tested, and certified system meeting the technical specifications outlined.

Electromedical and Electrotherapeutic Apparatus Manufacturing

POSTED

DEADLINE

SiteRite9 Ultrasound System

Solicitation # 36C24726Q0779

The Birmingham VA Health Care System is seeking to procure a new SiteRite 9 Ultrasound System to replace its outdated SiteRite 8 unit, ensuring continued support for critical ultrasound-guided vascular access procedures and maintaining high standards of clinical accuracy and patient care. This procurement is being conducted under solicitation number 36C24726Q0779, which was posted on July 29, 2026, with a response deadline of August 3, 2026. The solicitation is classified as a combined action under a Small Business Set Aside, specifically designated as a Total Set Aside, meaning only eligible small businesses may bid. The North American Industry Classification System code is 334510, indicating the procurement falls under medical equipment manufacturing. The contract is managed by the 247-NETWORK Contract Office 7 within the Department of Veterans Affairs, with the office located in Augusta, Georgia, and the performance location specified as Alabama, ZIP code 35233. Primary point of contact for inquiries is Steven Timmons, reachable via email at steven.timmons@va.gov or by phone at 770-279-3403. The full solicitation details can be accessed through the SAM.gov platform.

Electromedical and Electrotherapeutic Apparatus Manufacturing

POSTED

DEADLINE

Post-Warranty Maintenance and Repair Services for PFT EquipmentThis contract provides ongoing maintenance, troubleshooting, calibration, and repair services for PFT equipment after the manufacturer’s warranty has expired, including the option for preventive maintenance agreements to ensure continued operational reliability. The services are intended to support the long-term functionality of the equipment through scheduled inspections, timely repairs, and technical support, minimizing downtime and extending equipment life. The contract is classified as a subcontract under a Small Business Set Aside, specifically reserved for small businesses as defined by the SBA, with the NAICS code 811219 indicating it falls under other commercial and industrial machinery and equipment repair and maintenance. It is managed by the Department of Veterans Affairs through the 247-NETWORK Contract Office 7, and while specific performance locations and contact details are not provided, the work is likely to be performed at VA facilities nationwide where PFT equipment is in use.

Other Electronic and Precision Equipment Repair and Maintenance

POSTED

DEADLINE

Supply and Delivery of Pulmonary Function Testing (PFT) EquipmentThe contract entails the procurement, delivery, and formal acceptance of the Vyntus™ ONE PFT Machine, a specialized pulmonary function testing device, along with all associated packaging, shipping, and logistical arrangements necessary to transport the equipment to a designated clinical site. This is a subcontract under a Small Business Set Aside designation, ensuring the work is awarded to a qualified small business, and falls under the NAICS code 339112 for medical equipment and supplies manufacturing. The Department of Veterans Affairs, through its 247-NETWORK Contract Office 7, is the contracting agency responsible for overseeing the fulfillment of this requirement. Delivery must be completed in accordance with specified clinical site requirements, ensuring the equipment arrives intact, fully functional, and ready for immediate use. The process includes comprehensive logistics coordination to guarantee timely and secure transport, as well as formal acceptance procedures to confirm compliance with technical and operational specifications. The contract was posted on July 28, 2026, and no solicitation number was assigned, indicating it is a direct award under a pre-existing framework. All activities are bound to the terms of the subcontract and must align with federal procurement guidelines governing small business set-asides.

Surgical and Medical Instrument Manufacturing

POSTED

DEADLINE

J059-- Fire Alarm Fiber Replacement

Solicitation # 36C24726Q0635

The contract pertains to the replacement of fire alarm fiber infrastructure at the Carl Vinson VA Medical Center in Dublin, Georgia, under a Firm-Fixed-Price arrangement with a total estimated value of up to $19,000,000. The work involves the demolition and replacement of existing fire alarm fiber systems, requiring the installation of certified single-mode fiber optic cable with minimal disruption to facility operations, and includes compliance with NFPA, NEC, and other applicable safety and sustainability standards. Performance is expected to be completed within 180 calendar days after award, with F.O.B. destination terms likely applying, and delivery and performance must occur at the specified VA facility. The solicitation is reserved exclusively for Service-Disabled Veteran-Owned Small Businesses (SDVOSB), requiring offerors to be certified in the SBA database and submit a physically signed non-electronic certificate of compliance with subcontracting limitations. Offerors must hold current professional certifications including NICET, CFOT, RCDD, and Notifier qualifications, and demonstrate relevant past performance on similar projects within the last five years. Proposal submissions must be delivered electronically via email to the Contracting Officer by August 3, 2026, and must include a completed SF-1449 form, detailed pricing for all contract line items, technical documentation, and supporting evidence of qualifications and past performance. The award will be made using a Lowest Price Technically Acceptable (LPTA) methodology, meaning that only proposals determined to be technically acceptable will be considered, and the award will go to the offeror with the lowest evaluated price. All contractors must comply with stringent federal requirements including prohibitions on covered telecommunications equipment from designated vendors, mandatory employment eligibility verification, minimum wage compliance under Executive Order 14026, and adherence to DEI discrimination prohibitions. Invoicing must be submitted electronically through VA-approved systems, and payments will be processed via EFT to the designated VA financial center. The contract includes multiple FAR and VAAR clauses with deviations, covering whistleblower protections, labor standards, trafficking in persons, equal opportunity for workers with disabilities, and other compliance obligations, all of which are binding on the contractor and must be flowed down to subcontractors.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

DEADLINE

Y1DA--534-24-102 Renovate SPS Spaces Construction

Solicitation # 36C24726Q0729

This contract is a 100% Service-Disabled Veteran-Owned Small Business (SDVOSB) set-aside under FAR Parts 12 and 36 for the renovation of Sterile Processing Service spaces at the Ralph H. Johnson VA Medical Center in Charleston, South Carolina, with an estimated value between $5 million and $10 million. The work is to be completed within a 360-calendar-day performance period beginning upon issuance of the Notice to Proceed, and the government will award a single firm-fixed-price contract using Lowest Price Technically Acceptable (LPTA) procedures. Quoters must submit both technical and price volumes by August 17, 2026, at 1:00 PM Eastern Standard Time via email, following an amendment that extended the original due date. To be considered technically acceptable, offerors must pass all four evaluation factors on a pass/fail basis: demonstrating qualified project manager and superintendent with proven experience on similar large-scale projects in active patient care environments; identifying a qualified communications subcontractor; submitting a complete project execution package including a 360-day draft schedule, phasing narrative for uninterrupted VA operations, communications protocol, and a safety narrative compliant with ICRA Class IV and ILSM standards; and providing an EMR score of 1.0 or less for the most recent policy year, or full mitigation documentation if higher. Failure in any single factor results in immediate rejection regardless of price. All submissions must adhere to stringent technical, safety, and compliance requirements tied to the construction environment of an active medical facility. Materials must be preserved in controlled temperature conditions between 7–30°C, properly labeled per manufacturer and industry standards including NFRC, ANSI, NFPA, and CGA, and delivered in original sealed containers to prevent damage. Key personnel must include a CQC System Manager with engineering credentials and a fully staffed CQC team covering electrical, mechanical, structural, and environmental disciplines, along with certified professionals such as BICSI installers and RCDDs for communication systems. Security systems must be fully integrated with IT networks and verified by the contractor using three current, identical installations, and all subcontractors must be pre-vetted. The contractor must operate under a robust Quality Control Plan with independent technical reviews, maintain all inspection documentation on-site, and comply with commercial clauses extended to construction, including inspection, warranty, and termination provisions under FAR and VAAR. Invoicing must be submitted electronically via VA’s OB10/Tungsten portal

Commercial and Institutional Building Construction

POSTED

DEADLINE

Background Investigation and Personnel Clearance ManagementThe contract encompasses the full administration of Special Agreement Checks, fingerprinting services, annual re-investigations, and ongoing compliance tracking for all personnel required to maintain security clearances. All activities must be conducted in strict alignment with federal guidelines and coordinated directly with the Department of Veterans Affairs security office to ensure accurate, timely, and auditable reporting. The scope demands rigorous attention to detail in managing the lifecycle of personnel clearances, from initiation through renewal and any required escalations, with a focus on maintaining the integrity and confidentiality of sensitive data. This subcontract falls under NAICS code 541611 and is managed by the 247-NETWORK Contract Office 7 under the Department of Veterans Affairs, with performance expected to occur in Montgomery, Alabama, at the zip code 36109. The solicitation was posted on July 27, 2026, with responses due by August 3, 2026, and is not subject to any specific set-aside designation. Contractors must be prepared to meet stringent federal security standards and provide documented evidence of compliance, operational efficiency, and secure handling of personally identifiable information throughout the duration of the engagement.

Administrative Management and General Management Consulting Services

POSTED

DEADLINE