Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

INSULATING COMPOUND, EL

Active
SPE4A6-26-T-12LSFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract specifies the procurement of an electrical insulating compound and plastic sealer identified by NSN 5970002336239, with a quantity of 13 gallons, to be delivered FOB destination within 171 days. The item is classified as a Type I (Code Q) shelf-life item with a non-extendable shelf life of 36 months, and packaging must comply with MIL-STD-2073-1E and DLA packaging requirements, including marking per MIL-STD-129R with special code 32 indicating shelf life. The product must adhere to technical and quality standards referenced in the DLA Master List, including MIL-DTL-3064C and QPL-3064-24, and is subject to zero-defect sampling under MIL-STD-1916 or equivalent zero-based plans. Mercury and mercury-containing compounds are strictly prohibited in the compound, its packaging, preservation, or contact with the hardware, except for specific exempted uses like batteries or instruments as outlined by NAVSEA, which require secondary containment. All supplies must be physically identified and marked according to RQ017, and the item is listed on a Qualified Products List, requiring manufacturer qualification. The delivery address is DLA Distribution Cherry Point in North Carolina, with inspection and acceptance occurring at destination, and no variance in quantity is permitted. Documentation for source approval, packaging, hazardous material handling, and preservation methods must comply fully with IP025 and IP056, and the contract is governed by the DLA Master List revision in effect on the solicitation issue date.

General Info

Procure 13 gallons of NSN 5970002336239 insulating compound, FOB destination, 36-month shelf life, zero-defect, no mercury, compliant with MIL standards.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

335999 - All Other Miscellaneous Electrical Equipment and Component ManufacturingView NAICS

Place of Performance

PR: 7017741985 PRLI: 0001 CONT’D, CHERRY POINT, NC, 28533-5040, US

Set-Aside

NONE

Documents

(1)

SPE4A6-26-T-12LS.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC COMMODITIES DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC COMMODITIES DIVISION
View Agency Profile
Office AddressUS
Contacts
VICTORIA BURCHAM
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
INSULATING COMPOUND,ELECTRICAL
INSULATOR, ELECTRICAL, PLASTIC SEALER
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
RC001: DOCUMENTATION REQUIREMENTS FOR SOURCE APPROVAL REQUEST (SAR)
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
THIS NSN IS LISTED AS A PRIMARY QPL OR QML
THEREFORE THE QUALIFIED PRODUCTS LIST OR
QUALIFIED MANUFACTURERS LIST IS APPLICABLE.
RS020: Shelf-life requirement RS001 for a TYPE I (CODE Q) item with a shelf life of 36 months (non-extendable) applies to this item.
TDP Rev A Gen 1
SPE4A6-26-T-12LS
SECTION B
IAW BASIC SPEC NR MIL-DTL-3064C
REVISION NR C DTD 07/14/2025
PART PIECE NUMBER: MIL-I-3064 TYPE H
TDP Rev A Gen 1 IAW REFERENCE STD NR MIL-STD-129R(3) REVISION NR R DTD 02/25/2023 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE UNK QPL-3064-24 NOT 1 REVISION NR 24 DTD 03/22/2007 PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017741985 0001 GL 13.000
NSN/MATERIAL:5970002336239
DELIVERY (IN DAYS):0171
DELIVER FOB: DESTINATION
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:HM CLNG/DRY:Z PRESV MAT:ZZ
WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:Z
UNIT CONT:ZZ OPI:M
INTRMDTE CONT:ZZ INTRMDTE CONT QTY:ZZZ
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:32 -32 Type I, shelf life
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
IP025: PACKAGING, MARKING, AND SHIPPING OF HAZARDOUS MATERIALS
IP056: MERCURY OR MERCURY COMPOUNDS ARE PROHIBITED IN PRESERVATION,
PACKAGING, PACKING AND MARKING.
PARCEL POST ADDRESS:
SW3113
DLA DISTRIBUTION CHERRY POINT
PHANTOM RD BLDG 147 BAY A
SPE4A6-26-T-12LS
SECTION B
PR: 7017741985 PRLI: 0001 CONT’D
CHERRY POINT NC 28533-5040
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
SW3113
DLA DISTRIBUTION CHERRY POINT
PHANTOM RD BLDG 147 BAY A
CHERRY POINT NC 28533-5040
US
Need Ship Date:01/31/2027 Original Required Delivery Date:01/10/2027
SPE4A6-26-T-12LS NSN/Part Number: 5970-00-233-6239 Quantity: 13 GL Purchase Request: 7017741985QTY: 13 Delivery: 171 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 335999
New
DIBBS
INSULATION SLEEVING SE
Solicitation # SPE4A6-26-T-11ZR
The contract specifies the procurement of an Electrical Insulation Sleving Set with part number LNCL-12-140-CK-N and NSN 5970015164430, quantity of 60 kit units, under solicitation SPE4A6-26-T-11ZR. The item is subject to stringent technical and quality requirements mandated by the DLA Master List of Technical and Quality Requirements, including mandatory Item Unique Identification (IUID) in compliance with MIL-STD-130, and must be packaged and marked per MIL-STD-2073-1E and MIL-STD-129 with special shelf life marking code 32. The item is classified as a Critical Application Item with a non-extendable shelf life of 60 months, requiring strict adherence to preservation and packaging standards. Mercury and mercury-containing compounds are strictly prohibited from direct contact with the item or its packaging, except for functional uses in batteries, lamps, or instruments as specifically authorized by NAVSEA. Sampling must follow MIL-STD-1916 or a comparable zero-based plan, with zero non-conformances required unless otherwise stated. The item must be procured in lengths divisible by 10 feet and delivered FOB origin within 171 days to the DLA Distribution facility in New Cumberland, PA, with a delivery deadline of January 31, 2027, despite the original required date being May 5, 2028. No quantity variance is permitted, and inspection and acceptance occur at destination, with all documentation and compliance governed by DFARS and DLA procedural notes.
ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335999
New
DIBBS
HEATING ELEMENT, ELE
Solicitation # SPE8E8-26-Q-0447
The contract pertains to the procurement of 86 electrical heating elements, nonimmersion type, identified by NSN 4520-01-391-8325, under solicitation SPE8E8-26-Q-0447, with a required delivery within 90 days of award. The procurement is managed by DLA Dist San Joaquin under the Department of Defense, with performance to occur in Tracy, California, 95304-5000. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, accessible via the official DLA website, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless amended. The contract incorporates DLA packaging requirements and affirms that covered defense information may apply. Mercury and mercury-containing compounds are strictly prohibited from intentional addition or direct contact with supplied hardware, except for functional uses in batteries, fluorescent lights, specified instruments, sensors, controls, weapon systems, or chemical reagents approved by NAVSEA; portable fluorescent lamps and instruments containing mercury must be shockproof and equipped with a secondary containment boundary in accordance with NAVSEA 5100-003D. Government identification must be removed from non-accepted supplies. The point of contact for inquiries is Jennifer Luczkowski, with email and phone provided, and responses are due by August 11, 2026.
DLA DIST SAN JOAQUIN

POSTED

about 3 hours ago

DEADLINE

in 7 days
View Details
NAICS: 335999
New
DIBBS
TAILLIGHT, VEHICULAR
Solicitation # SPE8E7-26-T-3457
The contract pertains to the supply of one vehicular taillight with NSN 6220-20-011-6730 and part number 106583, sourced from LIFTKING MANUFACTURING CORP, under solicitation SPE8E7-26-T-3457. Delivery is required within 20 days FOB origin, with no tolerance for quantity variance, and inspection and acceptance occur at the destination. Packaging must comply with MIL-STD-2073-1E and DLA’s packaging requirements, including specific preservation, wrapping, and unit packaging codes, while marking adheres strictly to MIL-STD-129 without special identification. The shipment is to be delivered to USS WASP LHD 1 at FPO AE 09556 via the fastest traceable method, explicitly prohibiting parcel post. Technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements apply, and the contract incorporates provisions for government identification removal, covered defense information, and source approval documentation. The delivery deadline is July 30, 2026, and the contract is managed under the Defense Logistics Agency with primary point of contact Kelly Mitchell. Pricing is set at $1.00 per unit for a total of $1.00, and all logistics and administrative codes are designated for government use only.
Defense Logistics Agency

POSTED

about 3 hours ago

DEADLINE

in 13 days
View Details
NAICS: 335999
New
DIBBS
INSULATION SLEEVING, EL
Solicitation # SPE4A6-26-T-12BM
This contract specifies the supply of electrical insulation sleeving under NSN 5970-01-365-9143 and part number HS40-400-4, with a quantity of two units to be delivered within 171 days to the DLA Distribution San Joaquin facility in Tracy, California. The item is designated as a critical application product and must comply with stringent technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, including sampling protocols per MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated. All packaging and marking must adhere to MIL-STD-2073-1E and MIL-STD-129, with units provided on reels, spools, or coils and palletized according to DLA packaging guidelines. The contract prohibits the intentional introduction of mercury or mercury-containing compounds into the product, except for specific exempted applications such as functional batteries, fluorescent lamps, sensors, or chemical reagents as approved by NAVSEA, and any portable mercury-containing devices must include a secondary containment barrier. Transportation instructions and freight shipping details are governed by DLA Procurement Notes C19 and C20, with delivery terms FOB origin and no variance allowed in quantity. Documentation for source approval and hazardous material handling must meet specific contractual conditions, and all deliveries must be received at the designated facility by the required delivery date of March 4, 2027.
ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335999
New
DIBBS
CONTACT, ELECTRICAL
Solicitation # SPE7M2-26-Q-0718
This contract pertains to the supply of electrical contacts designated by NSN 5999-01-082-0297, with a quantity of 7,597 units to be delivered under a firm fixed price arrangement with zero variance allowed in quantity. Delivery is required within 250 days after the award date, with inspection and acceptance occurring at the destination. The item is classified as a commercial item and is listed on a qualified products list, requiring strict adherence to the SAE AS39029E standard, including the mandatory marking of both the current and most recently superseded part numbers on each unit pack. The product is designated a critical application item with technical documentation aligned to TDP Rev B Gen 3 and must comply with MIL-STD-2073-1E packaging standards, including specific preservation methods, packaging materials, and unit container configurations. Marking must follow MIL-STD-129 with no special marking required. Mercury and mercury-containing compounds are strictly prohibited from intentional addition or direct contact with the hardware, except for specified functional uses like batteries, fluorescent lamps, sensors, and naval system components, which must meet additional containment and shockproofing requirements per NAVSEA 5100-003D. All packaging, labeling, and shipping of hazardous materials must comply with IP025 requirements. The contract references the DLA Master List of Technical and Quality Requirements for incorporated technical and quality mandates, with revisions controlled by the solicitation issue date. Deliveries are to be shipped to the DLA Distribution facility in New Cumberland, Pennsylvania, with transportation governed by DLAD Proc Note C19 and C20. The contract was issued under solicitation SPE7M2-26-Q-0718 with a proposal deadline of August 11, 2026, and the requirement is funded for a material need date of July 17, 2027.
NUCLEAR REACTOR PROGRAM

POSTED

about 3 hours ago

DEADLINE

in 7 days
View Details
NAICS: 335999
New
DIBBS
ELECTRODE
Solicitation # SPE4A6-26-T-11WH
The contract pertains to the procurement of three electrodes identified by NSN 5977-01-264-3739 and part number 40369LM, supplied by Brantner and Associates, Inc. under solicitation SPE4A6-26-T-11WH. The items must be delivered FOB origin within 171 days, with zero variance allowed in quantity, and are subject to inspection and acceptance at the destination. Packaging must comply with MIL-STD-2073-1E and marking must follow MIL-STD-129, with no special markings required. Palletization aligns with DLA packaging requirements, and preservation methods must exclude mercury or mercury compounds in any form, including packaging materials. Mercury-containing components such as batteries or instruments are permitted only under specific exceptions defined by NAVSEA, and all such items must include a secondary containment and be shock-proof per NAVSEA 5100-003D. Sampling and inspection protocols require adherence to MIL-STD-1916 or ASQ H1331, with zero non-conformances permitted unless otherwise stated, and critical attributes are assigned verification levels or AQLs as prescribed. The item has no shelf life requirement. All technical and quality requirements referenced in this contract are governed by the DLA Master List of Technical and Quality Requirements, with revisions controlled based on acquisition type and amendment dates. Documentation for source approval, engineering change proposals, and deviation requests must be formally submitted and approved. The delivery destination is the DLA Distribution facility in New Cumberland, Pennsylvania, and transportation instructions are aligned with DLAD procedural notes. The contract specifies a unit price of $3.00 per each, with a total contract value of $9.00. The solicitation was issued on August 4, 2026, with responses due by August 12, 2026, and the original required delivery date is March 22, 2027. The primary point of contact is Victoria Burcham of the ASC Commodities Division, Department of Defense.
ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335999
New
DIBBS
JUNCTION BOX
Solicitation # SPE4A7-26-T-610G
This contract is for the procurement of 28 units of a junction box identified by NSN 5975-01-174-3646 and part number A-8064CHAL from Hoffman Engineering Co, a division of Federal Cartridge Corp, with CAGE code 63098. The item is classified as a commercial off-the-shelf (COTS) product and designated as a critical application item. Strict prohibitions are in place against the intentional addition of mercury or mercury-containing compounds in the hardware, its packaging, preservation, or marking, with limited exceptions for functional uses in batteries, fluorescent lights, sensors, weapon systems, or specified chemical reagents; portable mercury-containing devices must be shockproof and include a secondary containment boundary in compliance with NAVSEA 5100-003D. Packaging must follow MIL-STD-2073-1E and MIL-STD-129, with no special marking required, and palletization must adhere to DLA packaging requirements. The item is delivered FOB origin with zero variance in quantity, inspected and accepted at the destination. Delivery is required within 58 days of contract award, with an original required delivery date of October 25, 2026, and a need ship date of October 10, 2026. The unit price is $28.00 per unit, totaling $784.00, and the contract is issued under solicitation SPE4A7-26-T-610G. The delivery address is DLA Distribution San Diego at 3581 Cummings Road, Building 3581, San Diego, CA 92136-3581, and transportation details are governed by DLAD Proc Notes C19 and C20.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335999
New
DIBBS
CONNECTOR BRUSH
Solicitation # SPE4A5-26-T-322R
The U.S. Department of Defense, through DLA Aviation, is seeking quotes for 27 units of NSN 5977012318738 CONNECTOR BRUSH, with delivery required to the DLA Distribution Depot Hill within 262 days after contract award. The procurement is conducted via a requested quotation (RFQ) under solicitation number SPE4A526T322R, with no hard copies available—only the electronic version accessible through the provided online link. The approved source for this item is supplier 73030 572866, and only electronic submissions will be accepted. All responsible suppliers may submit a quote provided it is received by the deadline of August 12, 2026. No technical specifications, plans, or drawings are provided, and the solicitation is open to all qualified sources without set-aside restrictions. The North American Industry Classification System code is 335999, and inquiries must be directed by email to the designated point of contact, with further details available through the SAM.gov portal using the solicitation number. The contracting office is located in Richmond, Virginia, under the agency name Department of Defense.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335999
New
DIBBS
TAPE, INSULATION, ELECTR
Solicitation # SPE4A6-26-T-12KH
This contract specifies the procurement of electrical insulation tape identified by NSN 5970009445015, designated as a commercial item with critical application status and a non-extendable shelf life of 18 months under TYPE I (CODE K) requirements. The tape must conform to technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, with sampling governed by MIL-STD-1916 or comparable zero-based plans, requiring zero non-conformances unless otherwise stated. Acceptance is at destination under FOB destination terms with no tolerance for quantity variance, and packaging and marking must comply strictly with MIL-STD-2073-1E and MIL-STD-129, including the special marking code 33 for shelf-life indication. The item must be palletized per DLA packaging requirements and shipped within five days of contract award. Approved suppliers include Saint-Gobain Performance Plastics Corp, Rogers Corporation, and Hawkeye International, LLC, each with specific part numbers. Documentation for source approval and shelf-life compliance is mandatory, and the unit of issue is RO with a total quantity of 136 RO. The solicitation, issued under SPE4A6-26-T-12KH by the Department of Defense’s ASC Commodities Division, has a response deadline of August 12, 2026, with performance required at Goldsboro, NC. The contract enforces full adherence to DLA’s packaging and identification protocols, including the removal of government identification from non-accepted supplies and documentation requirements tied to source approval. Inspection and acceptance occur at the destination, and all materials must be prepared with specific preservative methods, containment types, and labeling standards. The contract underscores strict compliance with quality assurance provisions, where unspecified attributes are treated as major, and zero-tolerance acceptance criteria apply to samples unless explicitly modified by contract wording. All requirements are binding under the DLA master document revisions in effect as of the solicitation issue date.
ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335999
New
DIBBS
HOLDER, ELECTRICAL C
Solicitation # SPE4A6-26-T-12KJ
The contract is for the procurement of 497 electrical contact brush holders identified by NSN 5977-00-091-6355 under solicitation SPE4A6-26-T-12KJ, with a delivery requirement of 31 days after order. The item is classified as a commercial item and must comply with DLA packaging, technical, and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise specified, and attributes are to be verified at predefined levels: VII for critical, IV for major, and II for minor. The item is subject to export controls under ITAR or EAR, prohibiting unauthorized disclosure to foreign persons anywhere, including through foreign national employees or subsidiaries, with DFARS 252.225-7048 governing its handling. Access to controlled technical data is restricted to DLA contractors with approved US/Canada Joint Certification Program status, completion of mandated DOD export control training, and formal approval from DLA. Cybersecurity requirements mandate CMMC Level 2 certification by a C3PAO, and physical identification and marking of the item must meet specified standards. All defense information covered under RD002 is subject to protection protocols. The point of contact is Marcita Robinson of the ASC Commodities Division, with performance located in New Cumberland, Pennsylvania.
ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335999
New
DIBBS
ELECTRODE
Solicitation # SPE4A6-26-T-11TG
The contract pertains to the procurement of five electrodes identified by NSN 5977-01-039-9640 under solicitation SPE4A6-26-T-11TG, with a delivery deadline of 171 days after order. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions tied to either the solicitation issue date or award date depending on acquisition size, and any amendments take precedence if issued. The item involves controlled technical data subject to ITAR or EAR export regulations, requiring strict compliance with DFARS 252.225-7048; disclosure to foreign persons, including foreign nationals in the U.S., is prohibited without prior authorization. Contractors must hold JCP certification, complete mandatory DOD export control training and the DLA questionnaire, and receive explicit approval from the DLA controlling authority to access the technical data. Additional requirements include CMMC Level 2 certification for third-party assessors, adherence to DLA packaging standards, configuration change management procedures, inspection and acceptance at origin, removal of government identification from non-accepted items, documentation for source approval requests, and stringent physical marking of the bare item. The solicitation was posted on August 4, 2026, with responses due by August 12, 2026, and the place of performance is in Tracy, California, under the oversight of the Department of Defense’s ASC Commodities Division.
ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335999
New
DIBBS
CABLE, SPECIAL PURPO
Solicitation # SPE7M0-26-T-028E
The contract specifies the procurement of a special purpose cable identified by NSN 6145-01-619-4942, with a quantity of 10 units required under purchase request 7017715761. Delivery must be completed within five days after contract award. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, accessible through the official DLA website, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless an amendment later updates the referenced revision. The alternate offeror is obligated to submit a complete data package, including specifications for both the approved and alternate part, despite no specific data being currently available. The solicitation number is SPE7M0-26-T-028E, issued on August 4, 2026, with responses due by August 17, 2026, under NAICS code 335999. The contracting activity is managed by the Maritime Supply Chain ESOc Buys within the Department of Defense, and all correspondence should be directed to Abaigael Masterson at the provided contact details.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 3 hours ago

DEADLINE

in 13 days
View Details

More opportunities from Department Of Defense → ASC COMMODITIES DIVISION

Same awarding agency

NAICS: 541512
New
DIBBS
Cybersecurity Compliance and Assessment Support
Computer Systems Design Services

POSTED

about 3 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 541611
New
DIBBS
Supply Chain Traceability and Documentation Management
Administrative Management and General Management Consulting Services

POSTED

about 3 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 541380
New
DIBBS
First Article Testing (FAT) and Production Lot Testing (PLT) Services
Testing Laboratories and Services

POSTED

about 3 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 332722
New
DIBBS
Manufacturing and Supply of Critical Safety Item (CSI)
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 3 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 332722
New
DIBBS
RING, RETAINING
Solicitation # SPE4A6-26-T-12LQ
This contract pertains to the procurement of retaining rings identified by NSN 5325-01-269-2248, with a quantity of 290 units to be delivered FOB origin within 171 days. The requirement is governed by stringent technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, with packaging and marking mandated to comply with MIL-STD-2073-1E and MIL-STD-129. Packaging must adhere to DLA-specific guidelines, including prohibited use of mercury or mercury-containing compounds in preservation, packaging, and marking, except for enumerated functional applications such as batteries, fluorescent lamps, and approved instruments, which must additionally feature shock-proof design and a secondary containment barrier in accordance with NAVSEA 5100-003D. The contract explicitly prohibits the intentional introduction of mercury into any supplied hardware. Delivery is to be made to the DLA Distribution San Joaquin receiving warehouse in Tracy, California, with no variance permitted in quantity. The item is flagged as a critical application, and documentation for source approval must meet specified requirements. The solicitation was issued under contract number SPE4A6-26-T-12LQ with a response deadline in August 2026, and the primary point of contact is Marchello Fields from the ASC Commodities Division.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
SCREW, MACHINE
Solicitation # SPE4A6-26-T-11PM
This contract specifies the procurement of 3,776 machine screws identified by NSN 5305-00-054-5636 and part number MS51957-2, manufactured to the current revision of MIL-STD or industry consensus standards, with all items produced after the solicitation date required to meet the latest version of the governing specification. The items are classified as commercial and subject to tailored quality requirements including inspection and acceptance at origin, with zero non-conformances mandated in sampling under MIL-STD-1916 or equivalent zero-based plans. Critical attributes are verified at the highest level, and unspecified features are treated as major. The screws must not contain or come in direct contact with mercury or mercury compounds except under specific exemptions for functional components like batteries or sensors, and portable devices containing mercury must have shock-proof design and secondary containment as per NAVSEA 5100-003D. All packaging must comply with MIL-STD-2073-1E and DLA packaging requirements, with preservation methods including drying and protective materials, and marking adhering strictly to MIL-STD-129 without special codes. Mercury is prohibited in preservation and packing materials. Items are to be delivered FOB origin in 146 days to Warner Robins AFB, Georgia, with no tolerance for quantity variance. The supplier must ensure physical identification is applied per MIL-STD-130N, and all hardware must be traceable with manufacturer logos, lot numbers, and material markings. Transportation and shipping instructions reference DLA procedural notes, and all contractual requirements are governed by the DLA Master List of Technical and Quality Requirements referenced in the document.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
PIN, QUICK RELEASE
Solicitation # SPE4A6-26-T-11RF
This contract pertains to the procurement of a quick-release pin identified by NSN 5315-00-575-5740, with a required quantity of 184 units to be delivered FOB origin within 171 days, with no variance allowed in quantity. All items must conform strictly to the current revision of the part standard SPE4A6-26-T-11RF Section B, and previous revisions are only acceptable for hardware manufactured prior to the solicitation date. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with sampling procedures adhering to MIL-STD-1916 or ASQ H1331 Table 1 using zero-defect acceptance unless otherwise stated; critical, major, and minor attributes are assigned verification levels VII, IV, and II respectively. The item is classified as a critical application and must undergo inspection and acceptance at the manufacturer’s origin. Mercury and mercury-containing compounds are prohibited unless essential for functional components such as batteries, fluorescent lamps, sensors, or weapon systems, and where used, portable devices must include a secondary containment barrier per NAVSEA 5100-003D. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129 for marking, with no special marking required. Palletization follows DLA packaging standards, and delivery is directed to DLA Distribution San Joaquin in Tracy, California. The contract enforces full compliance with defined standards, prohibits intentional contamination with hazardous substances, and mandates original delivery by January 31, 2027, despite the original required date of December 17, 2026.
Hardware Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334419
New
DIBBS
PRODUCTION LOT TESTING
Solicitation # SPE4A6-26-T-12FD
The contract pertains to the procurement of seven radio frequency cable assemblies with the NSN 0001S00000061, issued under solicitation SPE4A6-26-T-12FD with a response deadline of August 12, 2026, and a delivery requirement 261 days after award. Technical and quality requirements referenced in the contract are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the size of the acquisition. Packaging, identification, and removal of government markings from non-accepted items must comply with specific DLA directives, including RQ011 and RP001. Sampling for quality verification must follow MIL-STD-1916 or ASQ H1331, Table 1, with zero non-conformances required unless otherwise stated; critical, major, and minor attributes are assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Physical identification of the item must conform to RQ017, and source approval documentation must adhere to RC001. Technical data associated with this item is subject to export control under ITAR or EAR, restricting disclosure to foreign persons and requiring compliance with DFARS 252.225-7048; access is limited to contractors with approved US/Canada Joint Certification Program certification, completed DLA training, and formal authorization. The place of performance is Greensboro, North Carolina, and primary point of contact is Traci Beaudoin at DLA.
Other Electronic Component Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
SCREW, CAP, SOCKET HEAD
Solicitation # SPE4A6-26-T-11TF
The contract is for 158 units of socket head cap screws with NSN 5305-01-032-9232, issued under solicitation SPE4A6-26-T-11TF by the Department of Defense’s ASC Commodities Division. The unit of issue is each (EA), with a fixed unit price and total price based on the documented quantity; no variance is permitted in the delivered quantity. Delivery is required within 217 days of award, with FOB origin terms meaning the contractor assumes responsibility for shipment from the point of origin. Inspection and acceptance both occur at the destination warehouse located at 25600 S Chrisman Road, Tracy, CA 95304-5000. Packaging must comply with MIL-STD-2073-1E, including preservation method 10, dry climate conditions, and no mercury or mercury compounds permitted in any packaging materials. Marking must adhere to MIL-STD-129 with no special marking required, and palletization must follow DLA’s RP001 packaging standards. The parcel post and freight shipping addresses are identical, directing delivery to Recipient Warehouse 57. The original required delivery date is April 7, 2027, with a need ship date of March 18, 2027. Transportation instructions reference DLA procedural notes C19 and C20. The contract was posted on August 4, 2026, with responses due by August 12, 2026, and is classified under NAICS 332722 for machinery manufacturing. Primary point of contact is Lisa Harvie, reachable via phone or email provided.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
RING, RETAINING
Solicitation # SPE4A6-26-T-11PN
The contract is for the procurement of 820 retaining rings identified by NSN 5325-00-187-9033 under solicitation SPE4A6-26-T-11PN, classified as a commercial item and procured through a fully competitive process. The item must comply with the current revision of its defining military or consensus non-government part standard, with prior versions accepted only for hardware manufactured before the solicitation date. Quality assurance requirements are governed by MIL-STD-1916 or ASQ H1331 Table 1, or an equivalent zero-based sampling plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively; unspecified attributes are treated as major. Sampling must result in zero non-conformances unless otherwise allowed by the contract, and manufacturers may choose between attribute or variable inspection methods under MIL-STD-1916. The item is subject to DLA’s master list of technical and quality requirements, with revisions controlled by the solicitation issue date for simplified acquisitions. Identification marking must adhere to MIL-STD-130N dated 16 November 2012, and government identification must be removed from non-accepted supplies. Delivery is due within 171 days of award, with performance at Hill AFB, Utah, and the primary point of contact is Carl Younce at DLA.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332991
New
DIBBS
BEARING, PLAIN, SPHER
Solicitation # SPE4A6-26-T-12LE
This contract specifies the procurement of 14 spherical plain bearings under NSN 3120-01-576-6374 and part number 5136L017-1 from Circor Aerospace, Inc. DBA 50601, with delivery required within 264 days FOB origin. The item is classified as a critical application component and must comply with stringent technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, including tailored higher-level quality standards applicable to both manufacturers and non-manufacturers. Packaging, preservation, and marking must conform to MIL-STD-2073-1E, MIL-DTL-197M, and MIL-STD-129, with specific preservation methods determined by bearing type and closure, as outlined in referenced tables and paragraphs. Protective lubricants and preservation controls are dictated by bearing specifications, and the contractor’s packaging facility must meet quality assurance verification criteria. Unit of issue is each, with zero tolerance for quantity variance, and inspection and acceptance occur at destination. Item Unique Identification is not required per customer request, and all marking must follow specified standards without special codes. The solicitation number is SPE4A6-26-T-12LE, issued by the ASC Commodities Division of the Department of Defense, with a response deadline of August 12, 2026, and performance location at Hill AFB, Utah.
Ball and Roller Bearing Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details