Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →
CLEATUS
Get CLEATUS

INSULATING COMPOUND, EL

Active
SPE4A6-27-T-8619Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

Solicitation SPE4A6-27-T-8619, issued by the DLA Weapons Support ASC Commodities Division, is a request for the procurement of 42.5 units of electrical insulating compound under NSN 5970016737105. The contract specifies a delivery timeframe of 106 days, with a required ship date of February 27, 2027. Delivery is set as FOB Destination to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. Inspection and acceptance will also occur at the destination, governed by FAR 52.246-2. The contractor must adhere to strict quality and packaging standards, including MIL-STD-1916 for sampling and MIL-STD-129 for marking. Packaging must comply with MIL-STD-2073-1E and DLA packaging requirements (RP001), with specific mandates for the handling and shipping of hazardous materials under IP025 and FAR 52.223-3, including the submission of a Safety Data Sheet. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and compliance with the Buy American and Balance of Payments Program (DFARS 252.225-7001). Additionally, the contract incorporates cybersecurity reporting via DFARS 252.204-7012 and prohibitions on covered defense telecommunications equipment.

General Info

DLA solicitation for 42.5 units of electrical insulating compound delivered by February 2027.

Agency

Department Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

NAICS

335932 - Noncurrent-Carrying Wiring Device Manufacturing

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, USA

Set-Aside

NONE

Documents

1
PDF, High priority: read this firstrfq
High

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION
Contacts1 person available
OfficeUSA
Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION
Office AddressUSA
Contacts
Angela Boyce
contact@example.gov

Full Description

Show more
INSULATING COMPOUND,ELECTRICAL
INSULATING COMPOUND,ELECTRICAL
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
RQ017: PHYSICAL IDENTIFICATION/BARE ITEM MARKING
STAR BRITE DISTRIBUTING INC 0GR42 P/N 084104B
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7019012133 0001 CO 42.500
NSN/MATERIAL:5970016737105
DELIVERY (IN DAYS):0106
DELIVER FOB: DESTINATION
QTY VARIANCE: PLUS 0% MINUS 0%
SPE4A6-27-T-8619
SECTION B
PR: 7019012133 PRLI: 0001 CONT’D
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:HM CLNG/DRY:Z PRESV MAT:ZZ
WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:Z
UNIT CONT:ZZ OPI:M
INTRMDTE CONT:ZZ INTRMDTE CONT QTY:ZZZ
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:ZZ -ZZ Special Requirements
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
IP025: PACKAGING, MARKING, AND SHIPPING OF HAZARDOUS MATERIALS
PARCEL POST ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
Need Ship Date:02/27/2027 Original Required Delivery Date:02/27/2027
SPE4A6-27-T-8619 NSN/Part Number: 5970-01-673-7105 Quantity: 42.5 CO Purchase Request: 7019012133QTY: 43 Delivery: 106 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 335932
New
DIBBS
Supply of Mil-Spec Wire and ConnectorsThis subcontract involves the supply of mil-spec wiring, shielding, and connectors to prime contractors supporting the DLA Weapons Support ASC Commodities Division. The scope focuses on sourcing high-reliability electrical components specifically required for Textron part number 38031-92002-1, with performance taking place in Tracy, California. The provider must deliver certified raw materials and components accompanied by Certificates of Conformance. A critical requirement of the agreement is ensuring that all supplied materials strictly adhere to the domestic origin mandates set forth by the Buy American Act and the Berry Amendment.
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 19 hours ago

DEADLINE

in 7 days
View Details
NAICS: 335932
New
DIBBS
Precision Manufacture of Insulator Inserts (NSN 5970-01-710-2994)This subcontract involves the precision manufacture of three insulator inserts under NSN 5970-01-710-2994 for the DLA Weapons Support ASC Commodities Division. The selected provider must utilize specialized machining or molding equipment to ensure all items meet strict specifications, including physical identification standards and configuration change management requirements. Due to the nature of the project, the contractor must hold JCP certification to access necessary ITAR and EAR regulated data. Performance will take place in New Cumberland, and the final deliverables must be completed and marked according to the established guidelines.
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 19 hours ago

DEADLINE

in 7 days
View Details
NAICS: 335932
New
DIBBS
INSULATOR, WASHER
Solicitation # SPE7M0-27-T-1055
Solicitation SPE7M0-27-T-1055 is a small business set-aside request for quotations issued by the DLA Weapons Support Maritime Supply Chain ESOC Buys for the procurement of four insulator washers, identified by NSN 5970-01-483-4030. The contract is issued under the First Destination Transportation program with delivery required within five days after order, with the place of performance and delivery located at the Portsmouth Naval Shipyard in New Hampshire. Quality assurance is managed through origin inspection and acceptance, with authorized certificate of conformance procedures and a requirement for the manufacturer's inspection system to comply with SAE AS9003 or ISO 9001. The procurement is subject to strict export controls under ITAR and EAR, requiring contractors to have approved US/Canada Joint Certification Program certification and specific DLA authorization to access technical data. Packaging must adhere to MIL-STD-2073-1E and RP001 requirements, while invoicing must be processed electronically via the Wide Area WorkFlow system. Key regulatory compliance includes the Buy American Act, Berry Amendment, and DFARS cybersecurity standards. Quotations must be submitted via the DIBBS portal by November 12, 2026, and must not utilize additive manufacturing unless specifically authorized.
DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 19 hours ago

DEADLINE

in 7 days
View Details
NAICS: 335932
New
DIBBS
CONDUIT OUTLET
Solicitation # SPE4A7-27-T-2840
DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 19 hours ago

DEADLINE

in 7 days
View Details
NAICS: 335932
New
DIBBS
INSERT, INSULATOR
Solicitation # SPE4A6-27-T-8636
Solicitation SPE4A6-27-T-8636 is a request for quotations issued by the DLA Weapons Support ASC Commodities Division for the procurement of three insulator inserts, identified by NSN 5970-01-710-2994. The delivery is required within 325 days after order, with a target ship date of October 4, 2027, and the place of performance located in New Cumberland, Pennsylvania. The contract is subject to strict export controls under ITAR and EAR regulations, requiring contractors to have approved US/Canada Joint Certification Program certification and specific DLA authorization to access technical data. Compliance requirements include adherence to ISO 9001:2015 or equivalent quality standards, with origin inspection and acceptance required per FAR 52.246-2. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, while hazardous materials must be labeled according to the Hazard Communication Standard. Additionally, the solicitation incorporates CMMC Level 2 certification requirements and DFARS 252.204-7012 for safeguarding covered defense information. Payment and invoicing will be processed electronically through the Wide Area WorkFlow system.
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 19 hours ago

DEADLINE

in 7 days
View Details
NAICS: 335932
New
DIBBS
INSULATION SLEEVING, EL
Solicitation # SPE4A6-27-T-8637
Solicitation SPE4A6-27-T-8637, issued by the DLA Weapons Support ASC Commodities Division, is a request for quotations for 11 units of electrical insulation sleeving, identified by NSN 5970-01-686-9124. The required delivery date is February 26, 2027, with the place of performance and delivery located at the DLA Distribution DDSP New Cumberland facility in Pennsylvania. The contract requires a delivery lead time of 105 days after order. The procurement is subject to strict quality and compliance standards, requiring the manufacturer's inspection system to meet ISO 9001:2015 or an equivalent standard. Inspection and acceptance will occur at the point of origin, utilizing sampling methods per MIL-STD-1916 or ASQ H1331. Technical data is subject to ITAR or EAR export controls, and the contractor must be approved by the DLA controlling authority to access such data. Additionally, the contract mandates compliance with the Buy American Act, the Berry Amendment, and specific packaging and marking standards including MIL-STD-129 and RP001. Payment must be processed electronically through the Wide Area Workflow system.
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 19 hours ago

DEADLINE

in 7 days
View Details
NAICS: 335932
New
DIBBS
MOUNTING BASE, ELECTRIC
Solicitation # SPE4A5-27-T-2301
DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 19 hours ago

DEADLINE

in 7 days
View Details
NAICS: 335932
New
DIBBS
INSULATING COMPOUND KI
Solicitation # SPE4A6-27-T-8182
Solicitation SPE4A6-27-T-8182 is a small business set-aside issued by the DLA Weapons Support ASC Commodities Division for the procurement of three pounds of electrical insulating compound kits, identified by NSN 5970-00-253-6021. Each one-pound kit consists of one 1-lb can of RTV-3120 base and one 0.1-lb tube of RTV-3010-S catalyst. This is identified as a commercial off the shelf item and is designated as a critical application item. The required delivery date is October 28, 2026, with a delivery window of 20 days after the award. Shipping is FOB Origin to Tinker AFB, Oklahoma. The contract mandates strict quality and safety compliance, including the submission of SDS and OSHA hazard warning labels for approval by technical personnel prior to award. The items are subject to a non-extendable 12-month shelf life, with a reduced requirement of 50 percent remaining shelf life upon receipt. Packaging must adhere to MIL-STD-2073-1 and RP001, requiring all kit components to be cushioned in a single box with a detailed contents list. Marking and bar-coding must comply with MIL-STD-129, specifically using Special Marking Code 32. Inspection and acceptance will occur at the destination per FAR 52.246-2. Payment and receiving reports must be processed electronically through the Wide Area WorkFlow system.
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

2 days ago

DEADLINE

in 7 days
View Details
NAICS: 335932
New
DIBBS
SWITCH, LEVER
Solicitation # SPE7M8-27-T-0508
Solicitation SPE7M8-27-T-0508 is a small business set-aside issued by the DLA Weapons Support Electrical Devices Division for the procurement of one lever switch, identified by NSN 5930-01-442-8610 and Setra Systems part number 117679. The requirement is governed by NAICS code 335932. Delivery is required within 20 days after order, with an original required delivery date of October 30, 2026. The shipment is designated FOB Origin and will be delivered to the US Army SSA 173rd BDE in Vicenza, Italy. Inspection and acceptance will take place at the destination per FAR 52.246-2. The contractor must adhere to strict technical and quality standards, including MIL-DTL-28786 for switch preservation and packaging, MIL-STD-2073-1E for packaging data, and MIL-STD-129 for marking. Hazardous materials must be labeled according to the Hazard Communication Standard. Administrative requirements include electronic invoicing via the Wide Area WorkFlow system and compliance with the Buy American and Balance of Payments Program under DFARS 252.225-7001. Quotes must be submitted via the DIBBS portal by November 16, 2026, and are encouraged to include quantity ranges to accommodate demand volatility.
DLA WEAPONS SUPPORT ELECTRICAL DEVICES DIV

POSTED

2 days ago

DEADLINE

in 11 days
View Details
NAICS: 335932
New
DIBBS
INSULATION SLEEVING, EL
Solicitation # SPE4A6-27-T-8120
Solicitation SPE4A6-27-T-8120 is a fixed-price, small business set-aside contract issued by the Defense Logistics Agency for the procurement of 10 feet of electrical insulation sleeving, identified by NSN 5970-01-658-1021. Approved sources include Sumitomo Electric Interconnect (P/N 130-045-5-0), Dunbar Products LLC (P/N 130-045-5-0), and TE Connectivity Corporation (P/N ATUM-24/6-0-SP-CS6877). The requirement is designated as a critical application item with a quantity variance allowance of plus 10 percent and minus 0 percent. Delivery is established as FOB Origin with an original required delivery date of October 1, 2026, shipping to Marine Aviation Logistics Squadron 39 at Camp Pendleton, California. The contract mandates strict adherence to quality and packaging standards, including MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and MIL-STD-105/ASQ Z1.4 for sampling, requiring zero non-conformances for acceptance. Inspection and acceptance will occur at the destination. Key regulatory requirements include CMMC Level 2 self-assessment, compliance with the Buy American Act, and the use of the Wide Area WorkFlow system for invoicing. The solicitation also incorporates various FAR and DFARS clauses regarding hazardous material labeling, cybersecurity for covered defense information, and the HUBZone price evaluation preference.
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

2 days ago

DEADLINE

in 7 days
View Details
NAICS: 335932
New
DIBBS
INSULATION SLEEVING, EL
Solicitation # SPE4A6-27-T-6915
Solicitation SPE4A6-27-T-6915, issued by the DLA Weapons Support ASC Commodities Division, is a request for quotations for electrical insulation sleeving, specifically NSN 5970-01-319-4531. The requirement is for 80 units of material supplied in 4-foot lengths. This is a critical application item that must be manufactured or assembled by an accredited manufacturer or distributor listed on the Performance Review Institute Qualified Manufacturer List or Qualified Products List. Technical compliance is governed by SAE AS23053/1 Revision A, and the product carries a non-extendable shelf life of 12 months. The contract specifies FOB Origin delivery with a required delivery window of 5 days after order. Quality assurance requires origin inspection and acceptance based on zero non-conformances, utilizing sampling methods such as MIL-STD-1916 or ASQ H1331. Packaging and marking must adhere to MIL-STD-2073-1E and MIL-STD-129, including special marking code 33 for shelf-life items. Offerors must submit quotations via the DIBBS system, citing their manufacturing and source CAGE codes. The procurement incorporates standard FAR and DFARS clauses regarding cybersecurity, domestic material restrictions, and the use of the Wide Area WorkFlow system for electronic invoicing.
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

2 days ago

DEADLINE

in 1 day
View Details
NAICS: 335932
New
DIBBS
DISTRIBUTION BOX
Solicitation # SPE7M0-27-T-1005
Solicitation SPE7M0-27-T-1005 is a small business set-aside issued by the DLA Weapons Support Maritime Supply Chain ESOC Buys for the procurement of one distribution box, identified by NSN 6110-99-459-9801 and part number MUA7407080. The requirement is for a single unit to be delivered to the 1AD Sustainment Brigade SSA at Fort Bliss, Texas. The delivery timeline is specified as five days after the order, with an original required delivery date of November 2, 2026. Shipping terms are established as FOB Origin, and both inspection and acceptance will occur at the destination. The contractor must adhere to strict packaging and marking standards, including ASTM D3951 and MIL-STD-129, with DLA Master List of Technical and Quality Requirements and RP001 palletization standards taking precedence. The solicitation incorporates various FAR and DFARS clauses, including the Buy American Act, NIST SP 800-171 cybersecurity assessment requirements, and specific mandates for hazardous and radioactive material labeling. Invoicing and payment must be processed electronically through the Wide Area WorkFlow system. Quotes are to be submitted via the DLA Internet Bid Board System by November 16, 2026, with evaluation considering socioeconomic status and the HUBZone price preference.
DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

2 days ago

DEADLINE

in 11 days
View Details

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

Same awarding agency

NAICS: 488410
New
DIBBS
MIL-SPEC Packaging and Hazardous Materials Shipping
Motor Vehicle Towing

POSTED

about 19 hours ago

DEADLINE

in 14 days
View Details
NAICS: 423830
New
DIBBS
Supply of Temperature Indicating Controls (NSN 6685015430839)
Industrial Machinery and Equipment Merchant Wholesalers

POSTED

about 19 hours ago

DEADLINE

in 14 days
View Details
NAICS: 336412
New
DIBBS
Manufacturing of Non-Aircraft Gas Turbine Engine Fans
Aircraft Engine and Engine Parts Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 7 days
View Details
NAICS: 331210
New
DIBBS
Supply of Raw Material for Sleeve BushingsThis subcontract involves the supply of raw metal stock or pre-formed blanks to prime contractors supporting DLA Weapons Support ASC projects. The selected provider is responsible for sourcing and delivering raw materials that strictly adhere to the chemical and physical properties specified in the technical data package for NSN 3120-01-243-5171. All deliveries must be accompanied by the necessary material certifications and Mill Test Reports to ensure compliance. Managed by the Department of Defense under the DLA Weapons Support ASC Commodities Division, the contract falls under NAICS code 331210. Performance of the contract is centered in New Cumberland, Pennsylvania. Interested parties must respond by November 12, 2026, to provide certified raw materials directly to the designated manufacturer.
Iron and Steel Pipe and Tube Manufacturing from Purchased Steel

POSTED

about 19 hours ago

DEADLINE

in 7 days
View Details
NAICS: 488510
New
DIBBS
Military-Grade Packaging and Palletization ServicesThis subcontract for Military-Grade Packaging and Palletization Services supports prime contractors on projects for the Department of Defense DLA Weapons Support ASC Commodities Division. The scope of work involves the specialized packaging of precision components in accordance with ASTM D3951, labeling and marking per MIL-STD-129, and palletization following DLA requirement RP001. All tasks must be completed using MIL-SPEC materials and industrial equipment to ensure shipments are ready for FOB Origin transport. The performance of this contract will take place in New Cumberland, Pennsylvania. Interested parties should note that the solicitation was posted on November 4, 2026, with a response deadline of November 12, 2026. The project falls under NAICS code 488510.
Freight Transportation Arrangement

POSTED

about 19 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332710
New
DIBBS
Manufacture of Sleeve Bushings (NSN 3120-01-243-5171)This subcontract involves the precision CNC machining of 284 sleeve bushings under NSN 3120-01-243-5171 for the DLA Weapons Support ASC Commodities Division. The selected manufacturer is responsible for executing both the First Article Test and full production runs, with final delivery of the finished units shipped FOB Origin to DLA Distribution DDSP in New Cumberland, Pennsylvania. To qualify, contractors must maintain rigorous quality and security standards, including SAE AS9003 or ISO 9001 certification. Additionally, the project mandates CMMC Level 2 and NIST SP 800-171 compliance, as well as full ITAR and EAR approval. The opportunity is categorized under NAICS code 332710 and is managed by the Department of Defense.
Machine Shops

POSTED

about 19 hours ago

DEADLINE

in 7 days
View Details
NAICS: 325181
New
DIBBS
Lead Storage Battery Supplier (NSN 6150-01-564-5406)This subcontract opportunity is issued by the Department of Defense under the DLA Weapons Support ASC Commodities Division for the supply of lead storage batteries. The selected supplier will be responsible for manufacturing or sourcing 1,056 units that match NSN 6150-01-564-5406. All deliverables must be packaged and palletized according to MIL-STD-2073-1E and RP001 standards, and the supplier must possess a valid CAGE code for the acceptance location. The contract is designated as a Total Small Business Set-Aside under NAICS code 325181. Successful bidders must be able to complete the delivery of all units within 210 days after the order is placed. Responses to this solicitation are due by November 14, 2026.
Alkalies and Chlorine Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 9 days
View Details
NAICS: 334419
New
DIBBS
Supply of Radio Frequency (RF) Cable AssembliesThis subcontract, issued by the DLA Weapons Support ASC Commodities Division, involves the supply of three Radio Frequency (RF) cable assemblies identified by NSN 5995016021582. The project is designated as a Total Small Business Set-Aside under NAICS code 334419, with performance taking place in Tobyhanna. The contractor is responsible for manufacturing or sourcing the assemblies while adhering to strict military standards for packaging, marking, and palletization. Quality assurance must be conducted according to specific sampling standards, and the provider is required to maintain a CMMC Level 2 Self-Assessment to ensure the secure handling of Covered Defense Information.
Other Electronic Component Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 7 days
View Details
NAICS: 339999
New
DIBBS
Supply of Strap Assembly-Axe Emergency Escape (NSN 1560015013468)This subcontract involves the manufacture or procurement of Strap Assembly-Axe Emergency Escape components for prime contractors supporting DLA Distribution San Diego. The contractor is responsible for ensuring all assemblies meet NSN 1560015013468 specifications, including bare item marking according to RQ017 and packaging in compliance with MIL-STD-129. Performance will take place in San Diego, California, under the oversight of the Department of Defense DLA Weapons Support ASC Commodities Division. Strict regulatory and security standards apply to this engagement, requiring full compliance with the Buy American Act and the Berry Amendment. Additionally, the contractor must maintain CMMC Level 2 certification and adhere to ITAR and EAR export control regulations. The final deliverable consists of the completed, marked, and packaged assemblies delivered to the specified location.
All Other Miscellaneous Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
Supply of Quick Release Pins (MS14531-1C619321)This subcontract involves the supply of three precision-manufactured quick release pins, identified by part number MS14531-1C619321 and NSN 5315015040398, for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The contractor is responsible for manufacturing or sourcing the pins in strict accordance with NASM14531 Revision 2. Delivery is established as FOB Origin, with the place of performance located in New Cumberland. Strict adherence to military and federal standards is required for the fulfillment of this contract. All items must be packaged according to MIL-STD-2073-1E and marked per MIL-STD-129. Additionally, the contractor must ensure full compliance with 29 CFR 1910.1200 regarding the labeling of hazardous materials.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 7 days
View Details
NAICS: 488410
New
DIBBS
MIL-SPEC Packaging and Fragile Logistics ServicesThis subcontract for MIL-SPEC Packaging and Fragile Logistics Services involves providing specialized packaging for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The scope of work focuses on the secure packaging of optical components in strict accordance with MIL-STD-2073-1E and RP001 standards, requiring the use of MIL-SPEC anti-static, shock-absorbent, or moisture-barrier materials and the application of fragile marking code 01. The contractor is responsible for coordinating the delivery of shipment-ready, compliant packages to the USS George Washington (CVN 73) at FPO AP 96607. This requirement falls under NAICS code 488410 and is managed by the Department of Defense.
Motor Vehicle Towing

POSTED

about 19 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332994
New
DIBBS
Precision Optical Lens Fabrication (NSN 6210-01-460-6632)This subcontract involves the manufacture and supply of a single precision light lens for the DLA Weapons Support ASC Commodities Division under NSN 6210-01-460-6632. The contractor is required to fabricate the optical lens to exact government specifications using precision grinding and polishing techniques, with a strict prohibition on the use of additive manufacturing. To qualify, the provider must maintain SAE AS9003 or ISO 9001 quality systems and hold certification from the US/Canada Joint Certification Program. Additionally, the contractor must ensure full compliance with ITAR or EAR export controls. The project is categorized under NAICS code 332994 and requires performance at FPO 96607.
Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 7 days
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

NAICS: 335932
Closed
DIBBS
SLEEVE
Solicitation # SPE4A6-26-U-1991
ASC COMMODITIES DIVISION

POSTED

about 19 hours ago

CLOSED

8 months ago
View Details
NAICS: 335932
Awarded
DIBBS
CABLE ASSEMBLY, SPEC
Solicitation # SPE4A6-26-Q-0849
Defense Logistics Agency

POSTED

about 19 hours ago

DEADLINE

N/A
View Details

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS