Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Insulation and Jacketing for Steam Piping

Active

Federal

Response Deadline09/04/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract is for the installation of thermal insulation and protective jacketing on repaired steam piping at a facility in Bay Pines, Florida, with the primary objectives of minimizing heat loss and safeguarding personnel from burn hazards. The work is classified under NAICS code 238290 and is set aside exclusively for Service-Disabled Veteran-Owned Small Businesses, ensuring preference is given to qualified veteran-owned contractors. The solicitation was posted on July 31, 2026, with responses due by September 4, 2026, at 5:00 p.m. The contracting office is the 248-NETWORK Contract Office 8 under the Department of Veterans Affairs, indicating this effort supports federal infrastructure maintenance within the VA system. Performance is localized to the Bay Pines area, and the subcontract nature suggests the work may be part of a larger maintenance or renovation initiative tied to VA healthcare or administrative facilities.

General Info

Thermal insulation and jacketing for steam piping in Bay Pines, Florida, set aside for service-disabled veteran-owned small businesses.

Agency

Department Of Veterans Affairs → 248-NETWORK Contract Office 8 (36C248)View Agency

NAICS

238290 - Other Building Equipment ContractorsView NAICS

Place of Performance

Bay Pines, FL, 33744, USA

Set-Aside

SDVOSBC

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 31

subcontract

Response DeadlineSep 4

Submission deadline

Response Deadline

09/04/2026, 05:00:00 PM UTCin about 1 month

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Veterans Affairs → 248-NETWORK Contract Office 8 (36C248)

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Veterans Affairs → 248-NETWORK Contract Office 8 (36C248)

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Installation of thermal insulation and protective jacketing on repaired steam piping to prevent heat loss and personnel burn hazards.

Similar Contracts

Same NAICS industry code

Waterfront Elevator Controls - BESThe contract entails the replacement of outdated elevator controllers and door closers for the Bell St. Garage elevators, specifically units N4 and N5, along with associated modifications to elevators E2 and E3. This project includes the installation of new ceiling fixtures and lighting systems, as well as critical upgrades to meet current safety and building codes. Required modifications involve the addition of shut-off switches, enhanced ventilation systems, integrated fire alarm connectivity, and improved pit lighting to ensure operational safety and regulatory compliance. The work is part of a broader modernization effort coordinated by the Port of Seattle under the Waterfront Project Management office, aimed at extending the service life and reliability of aging elevator infrastructure. All work is expected to adhere to industry standards for commercial elevator systems, with particular attention to accessibility, emergency function, and system integrity.

Waterfront Project Management

POSTED

about 6 hours ago

DEADLINE

AED Installation and On-Site Deployment ServicesThe contract involves the installation of 89 automated external defibrillator units across school facilities within Richmond County, with full compliance to safety and accessibility standards. Each unit must be securely mounted, properly labeled with clear signage, and protected from environmental factors such as moisture, dust, and extreme temperatures. The contractor is required to coordinate directly with school staff to determine optimal placement locations in alignment with established emergency response plans, ensuring rapid access during critical situations. All installations must be completed in a manner that integrates seamlessly with existing school infrastructure and operations. The work is solicited as a subcontract under NAICS code 238290, with a submission deadline of September 2, 2026. While the exact location details and point of contact are not specified, the performance is limited to facilities under the jurisdiction of the Richmond County Board of Education in Georgia. The contract does not indicate a set-aside status or specific eligibility requirements beyond standard subcontracting procedures, and all work must be executed in compliance with state and local safety regulations. The timeline allows for planning and execution over a period of approximately six months from the posting date in July 2026.

Richmond County Board of Education

POSTED

DEADLINE

in about 1 month

Garage Door Safety Devices for Fire Stations

Solicitation # 2026-IFB-052

The Village of Schaumburg, Illinois, is issuing a solicitation for garage door safety devices to be installed at its fire stations, identified by solicitation number 2026-IFB-052. This procurement is managed by the Engineering and Public Works department and is open for responses until August 21, 2026, with inquiries directed to Richard Hoke, Project Manager, and Jillian Ostman, Purchasing Supervisor. As one of the largest economic centers in Illinois outside Chicago, Schaumburg supports a daytime population of 150,000, thousands of businesses, and extensive infrastructure including industrial, office, and retail space, making reliable public safety equipment essential. The project requires equipment that meets safety standards for high-traffic emergency facilities, with performance limited to locations within Illinois. The solicitation is classified under SLED government procurement and is aimed at ensuring operational safety and compliance in fire station operations without specifying a set-aside for small or disadvantaged businesses.

Engineering and Public Works

POSTED

DEADLINE

Master Locksmith Services (Hourly Labor)The contract entails the provision of skilled master locksmith services on an as-needed basis across municipal facilities in Florida, focusing on essential tasks such as key cutting, lock installation and replacement, and repair of doors and frames. All work must comply with city-mandated key control procedures to ensure security and accountability. Services are to be delivered under an hourly labor arrangement, with no fixed schedule, allowing for flexible response to operational needs as they arise. The work is classified under NAICS code 238290 and is structured as a subcontract, with a response deadline of August 19, 2026, and the solicitation posted on July 31, 2026. Performance location spans various municipal sites under the jurisdiction of the Florida Public Works agency, with no specific office address or point of contact provided in the listing.

POSTED

DEADLINE

In-Truss Escalator Modernization (Units C 49-51, C 52-54, C 59-60)The contract involves the modernization of existing escalator trusses at the Georgia World Congress Center Authority, specifically targeting units C 49-51, C 52-54, and C 59-60, with work focused on mechanical and electrical upgrades rather than full replacement. This includes the installation of new motors, control systems, and enhanced safety features integrated directly into the current truss structures to improve performance, reliability, and compliance with modern standards. The work is scoped to preserve the existing infrastructure while updating critical components to extend the operational life of the escalators and ensure continued safe functionality for high-volume pedestrian traffic. The solicitation is classified as a subcontract under NAICS code 238290, indicating it falls under other building construction specialties, and is open for responses until August 27, 2026. While no set-aside type or organizational requirements are specified, the project is being managed by the Georgia World Congress Center Authority with performance expected on-site at their facility. All interested parties must submit proposals by the deadline to be considered for award, with detailed technical and logistical plans required to demonstrate the ability to execute the upgrades without disrupting facility operations.

Georgia World Congress Center Authority

POSTED

DEADLINE

Elevator and Conveying Systems InstallationThe contract pertains to the installation, maintenance, and repair of elevators, lifts, and escalators within public buildings in Connecticut, under the oversight of the Public Works agency. It is categorized as a subcontract with a NAICS code of 238290, indicating specialized construction services related to building equipment. The solicitation was posted on July 31, 2026, and responses are due by August 14, 2026, at 3:00 p.m., leaving a two-week window for interested parties to submit proposals. Work must be performed within public buildings across the state, with no specific location designated beyond the state boundary. The contract does not specify a set-aside status, meaning it is open to all qualified contractors regardless of business size or ownership characteristics. All performance and compliance obligations are tied to the technical and safety standards applicable to vertical transportation systems in publicly funded facilities.

POSTED

DEADLINE

Sheet Metal Fabrication and InstallationThe contract pertains to the fabrication and installation of sheet metal components, encompassing ductwork, flashing, roofing, and architectural elements, under the NAICS code 238290. It is classified as a subcontract and is managed by the Public Works agency in Connecticut, with a posted date of July 31, 2026, and a response deadline of August 14, 2026, at 3:00 PM. The place of performance and specific location details are not provided, nor are contact details for the point of contact, though the contractual activity is accessible via a public procurement portal link. There is no set-aside designation indicated, and the contract is open to eligible subcontractors seeking to perform work on the specified sheet metal systems.

POSTED

DEADLINE

Security Door and Access Control Hardware UpgradeThe contract titled Security Door and Access Control Hardware Upgrade involves the installation or retrofit of secure entry doors, electromagnetic locks, and card readers, with full integration into existing federal access control systems. This work is specifically targeted at enhancing physical security infrastructure to meet stringent federal standards, ensuring seamless compatibility with current authentication and monitoring platforms. The scope is focused on upgrading hardware components at a single location in Washington, D.C., with a ZIP code of 20220, and requires precise technical execution to maintain operational continuity during deployment. This is a subcontract awarded under a Small Business Set Aside, classified under NAICS code 238290, which designates it for small business concerns. The solicitation was posted on July 31, 2026, with responses due by August 31, 2026, at 5:00 p.m. The contracting entity is the Department of the Treasury through its Treasury Operations division, indicating the project supports federal security obligations. All work must comply with federal regulations governing access control systems, and vendors must demonstrate expertise in both hardware integration and system interoperability within secure government environments.

Treasury Operations

POSTED

DEADLINE

Painting and Corrosion ProtectionThe contract involves surface preparation, rust removal, priming, and the application of anti-corrosive coatings specifically to protect a gate structure located in a marine environment, ensuring long-term durability against saltwater exposure and harsh coastal conditions. Work must be performed in strict compliance with industry standards for corrosion protection, using materials and techniques suitable for high-moisture, high-salinity settings to maintain structural integrity and operational reliability. This is a subcontract classified as a Small Business Set Aside under NAICS code 238290, reserved exclusively for small businesses, and is managed by the Department of Homeland Security through Base Charleston. The solicitation was posted on July 31, 2026, with responses due by August 18, 2026, and the work is to be performed at a location in Charleston with a zip code of 29401. All parties must adhere to the requirements specified in the solicitation, and any proposals must demonstrate capability to execute the full scope of coating work in a marine setting within the established timeline.

Base Charleston

POSTED

DEADLINE

Gate Mechanical and Structural RepairThe contract titled Gate Mechanical and Structural Repair requires the repair or replacement of damaged components of a front gate, including hinges, latches, locking mechanisms, and metal framing, with specialized work involving welding and precise alignment to restore full functionality. The scope focuses on mechanical and structural integrity, ensuring the gate operates securely and safely. This subcontract is designated as a Small Business Set Aside under the SBA program, specifically reserved for small businesses, and is classified under NAICS code 238290 for other specialty trade contractors. The opportunity was posted on July 31, 2026, with responses due by August 18, 2026, at 3:00 PM. Performance is required at the location in Charleston, South Carolina, with a ZIP code of 29401, under the oversight of the Department of Homeland Security through Base Charleston.

Base Charleston

POSTED

DEADLINE

Security System Installation for VA ClinicThe contract seeks the installation of comprehensive electronic and physical security systems at a Veterans Affairs clinic in Flint, including access control, surveillance cameras, intrusion detection, and perimeter security measures, all designed to meet federal standards. The work is structured as a subcontract under the 250-NETWORK Contract Office 10 (36C250), with the NAICS code 238290 indicating specialty trade contracting for electrical and wiring installation. All systems must be fully compliant with applicable federal security regulations to ensure the safety and integrity of the facility and its personnel. The solicitation was posted on July 31, 2026, with responses due by August 31, 2026, at 5:00 PM. The place of performance is specifically identified as Flint, though no further address details are provided. While no set-aside designation is specified, the contract is open to eligible subcontractors seeking to perform security system integration services. Interested parties must submit proposals through the designated SAM.gov portal by the stated deadline to be considered for award.

250-NETWORK Contract Office 10 (36C250)

POSTED

DEADLINE

Fire and Life Safety System InstallationThe contract calls for the installation of fire alarm systems, sprinklers, emergency lighting, and egress signage across facilities under the jurisdiction of the Department of Veterans Affairs, ensuring full compliance with NFPA standards and VA life safety codes. All work must be performed in accordance with applicable federal regulations and industry best practices to guarantee the safety and accessibility of Veterans Affairs properties, with the primary place of performance located in Flint. The scope encompasses system design integration, equipment procurement, installation, testing, and documentation to meet rigorous life safety requirements. This is a subcontract opportunity posted on July 31, 2026, with a response deadline of August 31, 2026. It is classified under NAICS code 238290 for other building construction services and managed by the 250-NETWORK Contract Office 10. The contract does not specify a set-aside type and lacks detailed point of contact information. Interested subcontractors must submit proposals before the deadline to be considered for award, and performance is expected to align strictly with federal life safety mandates without deviation.

250-NETWORK Contract Office 10 (36C250)

POSTED

DEADLINE

More opportunities from Department Of Veterans Affairs → 248-NETWORK Contract Office 8 (36C248)

Same awarding agency

Pressure Testing and System CommissioningThe contract requires comprehensive pressure testing and system re-commissioning services for repaired piping under the oversight of the Department of Veterans Affairs. Scope of work includes hydrostatic and pneumatic pressure testing, thorough leak checks, and full system re-commissioning to ensure operational integrity and compliance with technical standards. All work must be performed at the specified place of performance in Bay Pines, Florida, with exact zip code 33744, and is subject to VA supervision to verify adherence to quality and safety protocols. This is a subcontract opportunity set aside exclusively for Service-Disabled Veteran-Owned Small Businesses as defined by FAR 19.14, with the NAICS code 541340 indicating engineering services. The solicitation was posted on July 31, 2026, and responses are due by September 4, 2026, at 5:00 PM Eastern Time. The contracting office is the 248-NETWORK Contract Office 8 (36C248), and interested parties must submit proposals through the designated SAM.gov portal to be considered.

Drafting Services

POSTED

DEADLINE

in about 1 month

Piping Material Supply (Steam-Grade Components)The contract is for the supply of carbon steel pipe, fittings, valves, insulation, and hangers specifically engineered for high-pressure steam service, all of which must comply with ASME standards to ensure safety and performance under extreme conditions. The materials are intended for use at a designated performance location in Bay Pines, Florida, with the full scope focused on meeting the rigorous technical requirements of steam systems used in critical infrastructure. All items must be sourced and manufactured to exacting specifications, with quality assurance protocols integrated throughout fabrication and delivery to guarantee compliance and reliability. This is a subcontract under a Service-Disabled Veteran-Owned Small Business (SDVOSB) set-aside, with the NAICS code 423730 indicating the procurement falls under Merchant Wholesalers, Nondurable Goods. The opportunity was posted on July 31, 2026, with a response deadline of September 4, 2026, and is administered by the Department of Veterans Affairs through its 248-NETWORK Contract Office 8. Bidders must be certified SDVOSBs to qualify, and the award will prioritize eligible small businesses owned and controlled by service-disabled veterans. The procurement does not specify a solicitation number but directs interested parties to the SAM.gov workspace for further information and submission details.

Warm Air Heating and Air-Conditioning Equipment and Supplies Merchant Wholesalers

POSTED

DEADLINE

in about 1 month

Manhole Access and Confined Space WorkThe contract governs safe access, ventilation, and egress procedures for working inside manholes during steam pipe repair operations, with strict adherence to confined space safety protocols. It mandates comprehensive permit systems, continuous atmospheric monitoring, and emergency response measures to ensure worker safety in potentially hazardous enclosed environments. All activities must comply with industry-standard confined space regulations and include documented procedures for entry, monitoring, and evacuation. This is a subcontract set aside exclusively for Service-Disabled Veteran-Owned Small Businesses under FAR 19.14, classified under NAICS code 238990. The performance location is Bay Pines, Florida, with a deadline for responses set for September 4, 2026. The contracting office is the Department of Veterans Affairs, 248-NETWORK Contract Office 8, indicating federal oversight of the work, which supports infrastructure maintenance within VA facilities.

All Other Specialty Trade Contractors

POSTED

DEADLINE

in about 1 month

Steam Piping Repair in Manhole (Near Building 1)The contract pertains to the repair of damaged or degraded steam piping located within a manhole near Building 1 at the Bay Pines facility, with work scope encompassing full pipe replacement, reinstallation of thermal insulation, reestablishment of structural supports, and comprehensive pressure testing to ensure system integrity. All tasks must comply with industry standards for steam system restoration and safety, with particular attention to minimizing disruption to surrounding infrastructure and maintaining operational readiness of adjacent systems. The effort is classified as a subcontract and is specifically set aside for Service-Disabled Veteran-Owned Small Businesses, as defined under FAR 19.14, ensuring eligibility is restricted to qualifying SDVOSB entities. The North American Industry Classification System code 238220 applies, reflecting the specialized nature of the work within the plumbing and heating contractor sector. The solicitation was posted on July 31, 2026, with a firm deadline for responses set for September 4, 2026, at 5:00 PM Eastern Time. Performance is designated to occur at the Bay Pines location with a ZIP code of 33744, under the oversight of the Department of Veterans Affairs through its 248-NETWORK Contract Office 8. The contract does not specify a point of contact or detailed address beyond the performance location, and all proposals must align with federal procurement guidelines applicable to SDVOSB set-asides. Contractors must be prepared to demonstrate both technical capability to execute the repair work and verified SDVOSB status to be considered eligible for award.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

DEADLINE

in about 1 month

Supply of Dental Basic Exam Instrument SetsThe contract seeks the supply of 49 units of Hu-Friedy Dental Basic Exam RMD sets or approved equivalent instruments, intended for routine oral examinations and diagnostic procedures within dental care facilities. These sets are specified for use in maintaining standardized, high-quality diagnostic tools across clinical operations, ensuring consistency and reliability in patient care. The procurement is classified as a subcontract under NAICS code 339114, which pertains to surgical and medical instrument manufacturing, indicating the nature of the goods as specialized medical devices. The solicitation was posted on July 31, 2026, with a response deadline set for August 10, 2026, at 6:00 p.m., giving interested parties a defined window to submit proposals. The contracting office is the 248-NETWORK Contract Office 8 (36C248) under the Department of Veterans Affairs, suggesting the end-use is within VA healthcare services. There is no set-aside designation specified, meaning the opportunity is open to all qualified suppliers without restrictions based on business size or demographic criteria. Performance location and point of contact details are not provided, but the instrument sets will be delivered to VA facilities supporting dental health programs. The contract is accessible via the SAM.gov platform for further submission details.

Dental Equipment and Supplies Manufacturing

POSTED

DEADLINE

Supply of Dental Scaling and Root Planing Instrument SetsThe contract solicits the delivery of 20 units of Hu-Friedy Dental Scaling and Root Planing RMD sets, or approved equal alternatives, specifically designed for periodontal treatment and compatible with hospital sterilization protocols. These instrument sets are essential for clinical dental procedures requiring precise scaling and root planing to manage periodontal disease, ensuring compliance with healthcare standards in clinical environments. The equipment must meet rigorous quality and compatibility benchmarks to support the operational needs of dental care units within the Department of Veterans Affairs. The solicitation is posted under the NAICS code 339114 for Surgical and Medical Instrument Manufacturing and is structured as a subcontract under the 248-NETWORK Contract Office 8. The response deadline is August 10, 2026, at 6:00 PM, with the opportunity available for qualified vendors to submit proposals by the specified date. The contract is managed by the Department of Veterans Affairs, and while specific geographic performance details are not provided, the equipment is intended for use in VA healthcare facilities. All submissions must align with the stated technical requirements and be delivered in quantities and configurations that ensure seamless integration into existing clinical workflows.

Dental Equipment and Supplies Manufacturing

POSTED

DEADLINE

Supply of Dental Restorative Instrument SetsThe contract involves the procurement and delivery of 64 units of Hu-Friedy Dental Restorative Reusable Medical Device sets or approved equivalents, all of which must meet stringent medical-grade sterilization standards to ensure safety and compliance in clinical environments. The instruments are intended for dental restorative procedures and must conform to industry specifications for durability, functionality, and sterilization compatibility, ensuring they can be safely reused in healthcare settings without compromising infection control protocols. This is a subcontract under the Department of Veterans Affairs, managed by the 248-NETWORK Contract Office 8, with a solicitation posting date of July 31, 2026, and a response deadline of August 10, 2026. The North American Industry Classification System code 339114 indicates the procurement falls under the manufacturing of surgical and medical instruments. The place of performance and point of contact details are not specified, and the contractual obligation is structured as a subcontract without a specified set-aside classification. The full solicitation can be accessed via the provided SAM.gov link for additional procedural requirements.

Dental Equipment and Supplies Manufacturing

POSTED

DEADLINE

Z1DZ--FY27 NRM (PROJ 516-26-117) BB Repair Steam Piping in Manhole Near Building 1

Solicitation # 36C24827Q0004-1

The project involves the repair of steam piping in a manhole near Building 1 at the Bay Pines VAMC located at 10000 Bay Pines Blvd, St Petersburg, FL 33744, under project number 516-26-117. The contractor is responsible for full site preparation, including demolition and removal of existing structures, and must complete all work in accordance with the statement of work, drawings, and specifications. An organized site visit is scheduled for August 13, 2026, at 10:00 AM EST, and the deadline to submit requests for information was August 21, 2026, at 2:00 PM EST, directed to david.hernandez1@va.gov. The response deadline for proposals is September 4, 2026, at 5:00 PM EST, and all submissions must be made through the solicitation number 36C24827Q0004-1. This contract is exclusively set aside for Service-Disabled Veteran-Owned Small Businesses (SDVOSB) certified under VetCert, as per FAR 19.14, and bidders must be actively registered in both the Small Business Search database and the System for Award Management (SAM.gov) at the time of quote submission. The North American Industry Classification System code for this project is 236220, and the contracting office is the 248-NETWORK Contract Office 8 under the Department of Veterans Affairs, located in Tampa, FL. The primary point of contact for questions is Contracting Specialist David Hernandez, reachable at 813-893-3904 or david.hernandez1@va.gov.

Commercial and Institutional Building Construction

POSTED

DEADLINE

in about 1 month

6520--Dental RMD-Previously 36C24826Q0839

Solicitation # 36C24826Q1047

The contract requires the delivery of 133 name-brand Hu-Friedy Dental Reusable Medical Devices sets to the C.W. Bill Young Veterans Medical Center located at 10000 Bay Pines Blvd. in Bay Pines, Florida. These devices are essential for dental services provided to veterans and must be sourced exclusively from the original manufacturer to ensure compatibility, safety, and adherence to medical standards. The solicitation, designated as 36C24826Q1047, was posted on July 31, 2026, with responses due by 6:00 PM Eastern Time on August 10, 2026. The North American Industry Classification System code 339114 indicates the procurement falls under the category of Surgical and Medical Instrument Manufacturing. This effort is managed by the Department of Veterans Affairs, specifically through the 248-NETWORK Contract Office 8, based in Tampa, Florida. The primary point of contact for inquiries is Michael A. Shook, Contract Specialist, reachable via email at Michael.Shook@va.gov. There is no set-aside designation, meaning all eligible vendors may compete regardless of size or status. The place of performance is fixed at the Bay Pines campus, and all deliveries must meet the specified requirements without exception. Vendors must ensure compliance with all federal procurement regulations and the technical specifications for reusable dental instruments. The opportunity is accessible through the SAM.gov platform under the provided UI link, and bidders are expected to submit proposals that fully address the scope, timing, and quality standards outlined in the solicitation.

Dental Equipment and Supplies Manufacturing

POSTED

DEADLINE

Ammunition Packaging and Domestic Shipment ServicesThe contract requires the packaging and domestic transportation of ammunition in full compliance with federal carrier and safety regulations to ensure secure delivery to Orlando, FL, with a ZIP code of 32827. It encompasses the selection of appropriate containers, the implementation of approved closure methods, and coordination under FOB Destination terms to guarantee responsibility transfers only upon arrival at the designated location. All activities must adhere to stringent safety protocols to mitigate risks associated with hazardous materials during transit. This is a subcontract set aside exclusively for Service-Disabled Veteran-Owned Small Businesses under FAR 19.14, identified by NAICS code 484220 for truck transportation. The solicitation was posted on July 30, 2026, with responses due by August 10, 2026, and is managed by the Department of Veterans Affairs through the 248-NETWORK Contract Office 8. The place of performance is firmly established in Orlando, FL, and the offeror must be certified as a Service-Disabled Veteran-Owned Small Business to be eligible for award.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

Supply of .223 Caliber Duty AmmunitionThe contract is for the supply of 50,000 rounds of .223 caliber long rifle duty ammunition, to be delivered in 100 cases of 500 rounds each, and must meet all applicable SAAMI and law enforcement standards for performance and safety. The solicitation is set aside exclusively for Service-Disabled Veteran-Owned Small Businesses under the SDVOSB program, ensuring priority consideration for eligible firms as defined by FAR 19.14. The NAICS code 332992 applies, indicating the work falls under Other Miscellaneous Fabricated Metal Product Manufacturing. The opportunity is managed by the 248-NETWORK Contract Office 8 under the Department of Veterans Affairs, with performance required at a location in zip code 32827. Responses must be submitted by August 10, 2026, at 7:00 p.m., following the posting date of July 30, 2026. The contract is classified as a subcontract, and no point of contact information is provided in the public data.

Small Arms Ammunition Manufacturing

POSTED

DEADLINE

Supply of 9mm Duty Ammunition (124 Grain JHP)The contract requires the supply of 130,000 rounds of new production 9mm caliber, 124 grain jacketed hollow point (JHP) duty ammunition, fully compliant with SAAMI and law enforcement standards. The ammunition must be delivered in 130 cases, each containing 1,000 rounds, and must meet rigorous performance and safety specifications expected for law enforcement use. The solicitation is designated as a Service-Disabled Veteran-Owned Small Business (SDVOSB) Set-Aside under FAR 19.14, ensuring prioritization for qualifying small businesses owned and operated by service-disabled veterans. The NAICS code 332992 confirms the scope of manufacturing activity covered under this procurement. The contract was posted on July 30, 2026, with a firm response deadline of August 10, 2026, at 7:00 PM. The placing agency is the Department of Veterans Affairs, specifically the 248-NETWORK Contract Office 8 (36C248), and the place of performance is identified with a zip code of 32827. The contract type is classified as a subcontract, indicating it may be issued under a larger prime contract or as part of a broader procurement framework. All bids must adhere to the technical, compliance, and delivery requirements specified, with the expectation of timely fulfillment and adherence to federal procurement protocols.

Small Arms Ammunition Manufacturing

POSTED

DEADLINE