Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Manhole Access and Confined Space Work

Active

Federal

Response Deadline09/04/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract governs safe access, ventilation, and egress procedures for working inside manholes during steam pipe repair operations, with strict adherence to confined space safety protocols. It mandates comprehensive permit systems, continuous atmospheric monitoring, and emergency response measures to ensure worker safety in potentially hazardous enclosed environments. All activities must comply with industry-standard confined space regulations and include documented procedures for entry, monitoring, and evacuation. This is a subcontract set aside exclusively for Service-Disabled Veteran-Owned Small Businesses under FAR 19.14, classified under NAICS code 238990. The performance location is Bay Pines, Florida, with a deadline for responses set for September 4, 2026. The contracting office is the Department of Veterans Affairs, 248-NETWORK Contract Office 8, indicating federal oversight of the work, which supports infrastructure maintenance within VA facilities.

General Info

Service-disabled veteran-owned small business subcontract for manhole safety work in Bay Pines, Florida, due September 4, 2026.

Agency

Department Of Veterans Affairs → 248-NETWORK Contract Office 8 (36C248)View Agency

NAICS

238990 - All Other Specialty Trade ContractorsView NAICS

Place of Performance

Bay Pines, FL, 33744, USA

Set-Aside

SDVOSBC

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 31

subcontract

Response DeadlineSep 4

Submission deadline

Response Deadline

09/04/2026, 05:00:00 PM UTCin about 1 month

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Veterans Affairs → 248-NETWORK Contract Office 8 (36C248)

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Veterans Affairs → 248-NETWORK Contract Office 8 (36C248)

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Safe entry, ventilation, and egress from the manhole for steam pipe repair, including confined space safety protocols, permits, and atmospheric monitoring.

Similar Contracts

Same NAICS industry code

Permitting, Inspections, and Code Compliance ManagementThe contract involves managing permitting, inspections, and code compliance for construction activities within Tennessee state parks, specifically centered in Monteagle with a zip code of 37356-7609. The work requires full coordination of building permit applications, scheduling and facilitating all necessary inspections, and ensuring that all construction and renovation efforts strictly adhere to both state of Tennessee regulations and the additional standards enforced by the state park system. The contractor must possess a thorough understanding of local and state building codes and be capable of interfacing with regulatory authorities to secure approvals and maintain compliance throughout the project lifecycle. This is a subcontract opportunity under NAICS code 238990, posted on August 1, 2026, with a response deadline of August 17, 2026. The entity issuing the contract is the Tennessee Department of Environment and Conservation under its Tennessee agency designation, and while no specific point of contact is listed, interested parties must respond through the official procurement portal managed by the state’s Central Procurement Office. The place of performance is fixed in Monteagle, and all services must be delivered in accordance with the regulatory frameworks applicable to state-owned lands and facilities.

Tennessee Department of Environment and Conservation

POSTED

about 18 hours ago

DEADLINE

Redwood Slat Screen Supply and InstallationThe contract involves the supply and installation of stained and sealed redwood slat screens designed for exterior shading and privacy, adhering strictly to architectural specifications. The work is scoped as a subcontract under the California Department of Parks & Recreation, with performance required in Contra Costa County. The NAICS code 238990 categorizes this as miscellaneous construction work, indicating the specialized nature of the installation beyond standard building trades. The project demands precision in material selection and finishing to ensure durability and aesthetic alignment with the site’s design intent, and all materials must be treated to withstand outdoor exposure and maintain long-term visual quality. Bids for this opportunity are due by September 2, 2026, with the solicitation posted on July 31, 2026. While no set-aside provisions or organizational type restrictions are specified, the contract is explicitly structured as a subcontract, suggesting it is part of a larger construction or renovation effort overseen by the agency. The absence of detailed point of contact or address information implies that communication and documentation will be handled through the state’s e-procurement portal. Contractors must ensure compliance with all architectural guidelines and installation standards, as failure to meet specifications could result in rejection of work or payment delays.

California Department of Parks & Recreation

POSTED

DEADLINE

in about 1 month

Galvanized & Painted Steel Gate Installation with Wood SlatsThe contract calls for the supply and installation of courtyard access gates constructed from galvanized and painted steel with redwood slats, ensuring compliance with both architectural design standards and long-term durability requirements. The gates must blend aesthetic appeal with structural resilience, suited for outdoor public use in a high-traffic environment. All materials and workmanship must meet specified quality benchmarks to withstand weather exposure and continuous usage without premature degradation. This subcontract is issued by the California Department of Parks & Recreation for performance within Contra Costa County, with a response deadline of September 2, 2026. The North American Industry Classification System code 238990 indicates it falls under other construction-related services, and while no set-aside status is designated, the project is part of state infrastructure maintenance and enhancement efforts. The solicitation was posted on July 31, 2026, and bidders must submit proposals through the official California eProcurement portal prior to the deadline.

California Department of Parks & Recreation

POSTED

DEADLINE

in about 1 month

Project Management and Prime Contract ExecutionThe contract encompasses the comprehensive management and execution of a public works construction project under a subcontracting arrangement, requiring the prime contractor to oversee all subcontractors, ensure strict adherence to bonding and disclosure regulations, and manage change orders throughout the project lifecycle. Responsibility extends to coordinating labor, materials, and schedules across multiple parties while maintaining compliance with state and federal public works standards, ensuring all documentation and financial assurances are properly submitted and maintained. Final acceptance of the project hinges on successful completion of all contractual obligations, including quality control, regulatory compliance, and timely resolution of any modifications or disputes through formal change order procedures. The work is classified under NAICS code 238990 for other specialty trade contractors and is under the jurisdiction of the Illinois Department of Engineering and Public Works, with a response deadline set for August 21, 2026. All activities must align with public procurement requirements, and performance is expected to meet the standards established for government-funded infrastructure projects.

Engineering and Public Works

POSTED

DEADLINE

Utility Adjustments and Box RaisingThe contract titled Utility Adjustments and Box Raising involves the precise adjustment and elevation of utility boxes and drainage structures to match newly installed pavement levels, ensuring proper alignment and functionality within the roadway infrastructure. This work is critical to maintaining the integrity of public utilities and stormwater systems following pavement reconstruction or resurfacing projects. The scope requires skilled labor and careful coordination to modify manholes, catch basins, valve boxes, and similar structures without disrupting service or compromising safety. This subcontract is managed by the Massachusetts Department of Public Works and is set to close for responses on August 21, 2026, with a posting date of July 31, 2026. It falls under NAICS code 238990, which covers other specialty trade contractors, indicating specialized nonbuilding construction services. The exact location of performance has not been specified in the provided data, but the work is expected to occur within Massachusetts, likely tied to municipal infrastructure upgrades. Bidders must be prepared to comply with state and local standards for utility accommodations and pavement integration, with an emphasis on precision, durability, and minimal disruption to public infrastructure.

Department of Public Works

POSTED

DEADLINE

Granite Curb and Brick Sidewalk InstallationThe contract involves the installation of granite curbs, brick sidewalks, and ADA-compliant wheelchair ramps as part of a broader streetscape improvement initiative under the Department of Public Works in Massachusetts. The work is classified under NAICS code 238990, indicating it falls within other heavy and civil engineering construction, and is structured as a subcontract opportunity with a response deadline of August 21, 2026. The project aims to enhance public infrastructure with durable, accessible, and aesthetically cohesive materials, ensuring compliance with accessibility standards for individuals with mobility challenges. All components must meet specific quality and safety requirements to align with municipal specifications for durable, low-maintenance urban elements. Performance of the work is expected to occur within Massachusetts, though exact location details are not specified. The solicitation was posted on July 31, 2026, and interested parties can access more information through the provided procurement portal link.

Department of Public Works

POSTED

DEADLINE

Traffic & Erosion Control ServicesLancaster County is seeking a subcontractor to provide temporary traffic control and erosion and sediment control measures during excavation activities, under a contract titled Traffic & Erosion Control Services. The work must be performed in Lancaster County, Pennsylvania, and the solicitation is open for bids until August 27, 2026, with proposals due by 2:00 PM local time. The opportunity is classified under NAICS code 238990, which applies to other specialty trade contractors, indicating the scope involves specialized field operations rather than general construction. The contract is structured as a subcontract, meaning the successful bidder will be working under a prime contractor or as part of a larger project team. All control measures must comply with local and state regulations to ensure public safety during excavation and to prevent environmental contamination from runoff or soil displacement. Bidders should be prepared to demonstrate experience in managing temporary traffic flow and implementing approved erosion control strategies in an active excavation environment.

Lancaster County

POSTED

DEADLINE

Soft Excavation & Utility Locating ServicesThe contract involves non-destructive excavation services to locate approximately 1,000 water service lines using vacuum excavation and hand tools, ensuring minimal disruption to surrounding infrastructure. The work requires close coordination with utility owners to accurately identify and mark underground utilities prior to excavation, following standard safety and precision protocols. All activities are to be performed within Lancaster County, Pennsylvania, with the contractor responsible for adhering to proper procedures for utility locating and site restoration. The solicitation is classified as a subcontract under NAICS code 238990 and was posted on July 31, 2026, with a response deadline of August 27, 2026. The contracting entity is Lancaster County in Pennsylvania, and the performance location is specifically within Lancaster County. There is no set-aside designation specified, and the procurement is open to eligible subcontractors who can demonstrate capability in soft excavation and utility identification services. The opportunity is accessible via the PennBid platform, and bidders are expected to provide detailed proposals addressing methodology, timelines, and compliance with local utility coordination standards.

Lancaster County

POSTED

DEADLINE

Water Meter Box & Lid ReplacementThe City of Baconton, Georgia, has initiated a subcontract to remove and replace approximately 150 water meter boxes and lids as part of an ongoing meter upgrade project. This work is classified under NAICS code 238990, indicating it falls under other specialty trade contractors, and is intended to support infrastructure modernization efforts. The solicitation was posted on July 31, 2026, with a deadline for responses set for September 3, 2026, at 3:00 PM. The project is positioned as a subcontract opportunity, though no specific set-aside program or organizational type is designated, and no point of contact information is provided. The place of performance is within the City of Baconton, Georgia, but no detailed address or zip code is listed in the contract data. Interested parties must respond through the provided online portal before the stated deadline to be considered for award.

City of Baconton

POSTED

DEADLINE

in about 1 month

Delivery and Installation of WindscreenThe contract requires the transportation and professional installation of a fabricated windscreen at a public sports facility, with strict emphasis on proper alignment, tensioning, and adherence to all applicable safety standards. The work must be executed by qualified personnel to ensure structural integrity and long-term durability under outdoor conditions, and the installation must meet the functional and regulatory requirements of the facility. All materials and labor must be provided as part of the scope, and the contractor is responsible for coordinating logistics, handling equipment, and completing the job without disrupting ongoing operations at the site. The solicitation is classified as a subcontract under NAICS code 238990, indicating specialized construction services, and is managed by the Public Works agency in Pennsylvania. Responses are due by August 14, 2026, with the posting date listed as July 31, 2026, suggesting a relatively short timeline for proposal submission. While specific details about the location or point of contact are not provided, the work is to be performed at a publicly owned sports facility, and compliance with local building codes and safety regulations is implicitly required. The contract does not specify any set-aside status, and the procurement is accessible through an online portal managed by the city of Pittsburgh.

POSTED

DEADLINE

Fence Screen Cover

Solicitation # 2026-RFQ-172

The project involves installing screen-printed covers on two 190-foot sections of six-foot-high chain link fence running along Clawson Street to the east of Homewood Park, specifically to screen the fence surrounding the new football stadium. Existing artwork will be transferred to these covers using screen printing, requiring precise alignment and durable application to withstand outdoor conditions. The solicitation is issued under number 2026-RFQ-172 by the Pennsylvania Public Works agency based in Pittsburgh, with a response deadline of August 14, 2026. The contracting authority is a state, local, or educational entity with no set-aside classification specified. All work must be performed at the described location in Pennsylvania, and inquiries should be directed to Aubrey Bloxdorf, DPW Project Manager - Parks, or Jacob Goldmann, Sourcing Specialist, using the provided contact details.

POSTED

DEADLINE

Construction ServicesThe contract is for construction services under a subcontract arrangement, aimed at executing work strictly in accordance with provided technical drawings, specifications, and established quality standards. The opportunity is posted by Dallas Area Rapid Transit in Texas, with a North American Industry Classification System code of 238990, indicating it pertains to other heavy and civil engineering construction activities. The solicitation was made available on July 31, 2026, and responses must be submitted by 7:00 PM on August 5, 2026. The place of performance and specific office address details are not specified, but the work is tied to the Dallas Area Rapid Transit network. No set-aside provisions or organizational type restrictions are identified, and no point of contact information is provided within the contract data. All submissions must be made through the designated online portal linked in the posting.

Dallas Area Rapid Transit

POSTED

DEADLINE

More opportunities from Department Of Veterans Affairs → 248-NETWORK Contract Office 8 (36C248)

Same awarding agency

Pressure Testing and System CommissioningThe contract requires comprehensive pressure testing and system re-commissioning services for repaired piping under the oversight of the Department of Veterans Affairs. Scope of work includes hydrostatic and pneumatic pressure testing, thorough leak checks, and full system re-commissioning to ensure operational integrity and compliance with technical standards. All work must be performed at the specified place of performance in Bay Pines, Florida, with exact zip code 33744, and is subject to VA supervision to verify adherence to quality and safety protocols. This is a subcontract opportunity set aside exclusively for Service-Disabled Veteran-Owned Small Businesses as defined by FAR 19.14, with the NAICS code 541340 indicating engineering services. The solicitation was posted on July 31, 2026, and responses are due by September 4, 2026, at 5:00 PM Eastern Time. The contracting office is the 248-NETWORK Contract Office 8 (36C248), and interested parties must submit proposals through the designated SAM.gov portal to be considered.

Drafting Services

POSTED

DEADLINE

in about 1 month

Insulation and Jacketing for Steam PipingThe contract is for the installation of thermal insulation and protective jacketing on repaired steam piping at a facility in Bay Pines, Florida, with the primary objectives of minimizing heat loss and safeguarding personnel from burn hazards. The work is classified under NAICS code 238290 and is set aside exclusively for Service-Disabled Veteran-Owned Small Businesses, ensuring preference is given to qualified veteran-owned contractors. The solicitation was posted on July 31, 2026, with responses due by September 4, 2026, at 5:00 p.m. The contracting office is the 248-NETWORK Contract Office 8 under the Department of Veterans Affairs, indicating this effort supports federal infrastructure maintenance within the VA system. Performance is localized to the Bay Pines area, and the subcontract nature suggests the work may be part of a larger maintenance or renovation initiative tied to VA healthcare or administrative facilities.

Other Building Equipment Contractors

POSTED

DEADLINE

in about 1 month

Piping Material Supply (Steam-Grade Components)The contract is for the supply of carbon steel pipe, fittings, valves, insulation, and hangers specifically engineered for high-pressure steam service, all of which must comply with ASME standards to ensure safety and performance under extreme conditions. The materials are intended for use at a designated performance location in Bay Pines, Florida, with the full scope focused on meeting the rigorous technical requirements of steam systems used in critical infrastructure. All items must be sourced and manufactured to exacting specifications, with quality assurance protocols integrated throughout fabrication and delivery to guarantee compliance and reliability. This is a subcontract under a Service-Disabled Veteran-Owned Small Business (SDVOSB) set-aside, with the NAICS code 423730 indicating the procurement falls under Merchant Wholesalers, Nondurable Goods. The opportunity was posted on July 31, 2026, with a response deadline of September 4, 2026, and is administered by the Department of Veterans Affairs through its 248-NETWORK Contract Office 8. Bidders must be certified SDVOSBs to qualify, and the award will prioritize eligible small businesses owned and controlled by service-disabled veterans. The procurement does not specify a solicitation number but directs interested parties to the SAM.gov workspace for further information and submission details.

Warm Air Heating and Air-Conditioning Equipment and Supplies Merchant Wholesalers

POSTED

DEADLINE

in about 1 month

Steam Piping Repair in Manhole (Near Building 1)The contract pertains to the repair of damaged or degraded steam piping located within a manhole near Building 1 at the Bay Pines facility, with work scope encompassing full pipe replacement, reinstallation of thermal insulation, reestablishment of structural supports, and comprehensive pressure testing to ensure system integrity. All tasks must comply with industry standards for steam system restoration and safety, with particular attention to minimizing disruption to surrounding infrastructure and maintaining operational readiness of adjacent systems. The effort is classified as a subcontract and is specifically set aside for Service-Disabled Veteran-Owned Small Businesses, as defined under FAR 19.14, ensuring eligibility is restricted to qualifying SDVOSB entities. The North American Industry Classification System code 238220 applies, reflecting the specialized nature of the work within the plumbing and heating contractor sector. The solicitation was posted on July 31, 2026, with a firm deadline for responses set for September 4, 2026, at 5:00 PM Eastern Time. Performance is designated to occur at the Bay Pines location with a ZIP code of 33744, under the oversight of the Department of Veterans Affairs through its 248-NETWORK Contract Office 8. The contract does not specify a point of contact or detailed address beyond the performance location, and all proposals must align with federal procurement guidelines applicable to SDVOSB set-asides. Contractors must be prepared to demonstrate both technical capability to execute the repair work and verified SDVOSB status to be considered eligible for award.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

DEADLINE

in about 1 month

Supply of Dental Basic Exam Instrument SetsThe contract seeks the supply of 49 units of Hu-Friedy Dental Basic Exam RMD sets or approved equivalent instruments, intended for routine oral examinations and diagnostic procedures within dental care facilities. These sets are specified for use in maintaining standardized, high-quality diagnostic tools across clinical operations, ensuring consistency and reliability in patient care. The procurement is classified as a subcontract under NAICS code 339114, which pertains to surgical and medical instrument manufacturing, indicating the nature of the goods as specialized medical devices. The solicitation was posted on July 31, 2026, with a response deadline set for August 10, 2026, at 6:00 p.m., giving interested parties a defined window to submit proposals. The contracting office is the 248-NETWORK Contract Office 8 (36C248) under the Department of Veterans Affairs, suggesting the end-use is within VA healthcare services. There is no set-aside designation specified, meaning the opportunity is open to all qualified suppliers without restrictions based on business size or demographic criteria. Performance location and point of contact details are not provided, but the instrument sets will be delivered to VA facilities supporting dental health programs. The contract is accessible via the SAM.gov platform for further submission details.

Dental Equipment and Supplies Manufacturing

POSTED

DEADLINE

Supply of Dental Scaling and Root Planing Instrument SetsThe contract solicits the delivery of 20 units of Hu-Friedy Dental Scaling and Root Planing RMD sets, or approved equal alternatives, specifically designed for periodontal treatment and compatible with hospital sterilization protocols. These instrument sets are essential for clinical dental procedures requiring precise scaling and root planing to manage periodontal disease, ensuring compliance with healthcare standards in clinical environments. The equipment must meet rigorous quality and compatibility benchmarks to support the operational needs of dental care units within the Department of Veterans Affairs. The solicitation is posted under the NAICS code 339114 for Surgical and Medical Instrument Manufacturing and is structured as a subcontract under the 248-NETWORK Contract Office 8. The response deadline is August 10, 2026, at 6:00 PM, with the opportunity available for qualified vendors to submit proposals by the specified date. The contract is managed by the Department of Veterans Affairs, and while specific geographic performance details are not provided, the equipment is intended for use in VA healthcare facilities. All submissions must align with the stated technical requirements and be delivered in quantities and configurations that ensure seamless integration into existing clinical workflows.

Dental Equipment and Supplies Manufacturing

POSTED

DEADLINE

Supply of Dental Restorative Instrument SetsThe contract involves the procurement and delivery of 64 units of Hu-Friedy Dental Restorative Reusable Medical Device sets or approved equivalents, all of which must meet stringent medical-grade sterilization standards to ensure safety and compliance in clinical environments. The instruments are intended for dental restorative procedures and must conform to industry specifications for durability, functionality, and sterilization compatibility, ensuring they can be safely reused in healthcare settings without compromising infection control protocols. This is a subcontract under the Department of Veterans Affairs, managed by the 248-NETWORK Contract Office 8, with a solicitation posting date of July 31, 2026, and a response deadline of August 10, 2026. The North American Industry Classification System code 339114 indicates the procurement falls under the manufacturing of surgical and medical instruments. The place of performance and point of contact details are not specified, and the contractual obligation is structured as a subcontract without a specified set-aside classification. The full solicitation can be accessed via the provided SAM.gov link for additional procedural requirements.

Dental Equipment and Supplies Manufacturing

POSTED

DEADLINE

Z1DZ--FY27 NRM (PROJ 516-26-117) BB Repair Steam Piping in Manhole Near Building 1

Solicitation # 36C24827Q0004-1

The project involves the repair of steam piping in a manhole near Building 1 at the Bay Pines VAMC located at 10000 Bay Pines Blvd, St Petersburg, FL 33744, under project number 516-26-117. The contractor is responsible for full site preparation, including demolition and removal of existing structures, and must complete all work in accordance with the statement of work, drawings, and specifications. An organized site visit is scheduled for August 13, 2026, at 10:00 AM EST, and the deadline to submit requests for information was August 21, 2026, at 2:00 PM EST, directed to david.hernandez1@va.gov. The response deadline for proposals is September 4, 2026, at 5:00 PM EST, and all submissions must be made through the solicitation number 36C24827Q0004-1. This contract is exclusively set aside for Service-Disabled Veteran-Owned Small Businesses (SDVOSB) certified under VetCert, as per FAR 19.14, and bidders must be actively registered in both the Small Business Search database and the System for Award Management (SAM.gov) at the time of quote submission. The North American Industry Classification System code for this project is 236220, and the contracting office is the 248-NETWORK Contract Office 8 under the Department of Veterans Affairs, located in Tampa, FL. The primary point of contact for questions is Contracting Specialist David Hernandez, reachable at 813-893-3904 or david.hernandez1@va.gov.

Commercial and Institutional Building Construction

POSTED

DEADLINE

in about 1 month

6520--Dental RMD-Previously 36C24826Q0839

Solicitation # 36C24826Q1047

The contract requires the delivery of 133 name-brand Hu-Friedy Dental Reusable Medical Devices sets to the C.W. Bill Young Veterans Medical Center located at 10000 Bay Pines Blvd. in Bay Pines, Florida. These devices are essential for dental services provided to veterans and must be sourced exclusively from the original manufacturer to ensure compatibility, safety, and adherence to medical standards. The solicitation, designated as 36C24826Q1047, was posted on July 31, 2026, with responses due by 6:00 PM Eastern Time on August 10, 2026. The North American Industry Classification System code 339114 indicates the procurement falls under the category of Surgical and Medical Instrument Manufacturing. This effort is managed by the Department of Veterans Affairs, specifically through the 248-NETWORK Contract Office 8, based in Tampa, Florida. The primary point of contact for inquiries is Michael A. Shook, Contract Specialist, reachable via email at Michael.Shook@va.gov. There is no set-aside designation, meaning all eligible vendors may compete regardless of size or status. The place of performance is fixed at the Bay Pines campus, and all deliveries must meet the specified requirements without exception. Vendors must ensure compliance with all federal procurement regulations and the technical specifications for reusable dental instruments. The opportunity is accessible through the SAM.gov platform under the provided UI link, and bidders are expected to submit proposals that fully address the scope, timing, and quality standards outlined in the solicitation.

Dental Equipment and Supplies Manufacturing

POSTED

DEADLINE

Ammunition Packaging and Domestic Shipment ServicesThe contract requires the packaging and domestic transportation of ammunition in full compliance with federal carrier and safety regulations to ensure secure delivery to Orlando, FL, with a ZIP code of 32827. It encompasses the selection of appropriate containers, the implementation of approved closure methods, and coordination under FOB Destination terms to guarantee responsibility transfers only upon arrival at the designated location. All activities must adhere to stringent safety protocols to mitigate risks associated with hazardous materials during transit. This is a subcontract set aside exclusively for Service-Disabled Veteran-Owned Small Businesses under FAR 19.14, identified by NAICS code 484220 for truck transportation. The solicitation was posted on July 30, 2026, with responses due by August 10, 2026, and is managed by the Department of Veterans Affairs through the 248-NETWORK Contract Office 8. The place of performance is firmly established in Orlando, FL, and the offeror must be certified as a Service-Disabled Veteran-Owned Small Business to be eligible for award.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

Supply of .223 Caliber Duty AmmunitionThe contract is for the supply of 50,000 rounds of .223 caliber long rifle duty ammunition, to be delivered in 100 cases of 500 rounds each, and must meet all applicable SAAMI and law enforcement standards for performance and safety. The solicitation is set aside exclusively for Service-Disabled Veteran-Owned Small Businesses under the SDVOSB program, ensuring priority consideration for eligible firms as defined by FAR 19.14. The NAICS code 332992 applies, indicating the work falls under Other Miscellaneous Fabricated Metal Product Manufacturing. The opportunity is managed by the 248-NETWORK Contract Office 8 under the Department of Veterans Affairs, with performance required at a location in zip code 32827. Responses must be submitted by August 10, 2026, at 7:00 p.m., following the posting date of July 30, 2026. The contract is classified as a subcontract, and no point of contact information is provided in the public data.

Small Arms Ammunition Manufacturing

POSTED

DEADLINE

Supply of 9mm Duty Ammunition (124 Grain JHP)The contract requires the supply of 130,000 rounds of new production 9mm caliber, 124 grain jacketed hollow point (JHP) duty ammunition, fully compliant with SAAMI and law enforcement standards. The ammunition must be delivered in 130 cases, each containing 1,000 rounds, and must meet rigorous performance and safety specifications expected for law enforcement use. The solicitation is designated as a Service-Disabled Veteran-Owned Small Business (SDVOSB) Set-Aside under FAR 19.14, ensuring prioritization for qualifying small businesses owned and operated by service-disabled veterans. The NAICS code 332992 confirms the scope of manufacturing activity covered under this procurement. The contract was posted on July 30, 2026, with a firm response deadline of August 10, 2026, at 7:00 PM. The placing agency is the Department of Veterans Affairs, specifically the 248-NETWORK Contract Office 8 (36C248), and the place of performance is identified with a zip code of 32827. The contract type is classified as a subcontract, indicating it may be issued under a larger prime contract or as part of a broader procurement framework. All bids must adhere to the technical, compliance, and delivery requirements specified, with the expectation of timely fulfillment and adherence to federal procurement protocols.

Small Arms Ammunition Manufacturing

POSTED

DEADLINE