Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Pressure Testing and System Commissioning

Active

Federal

Response Deadline09/04/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires comprehensive pressure testing and system re-commissioning services for repaired piping under the oversight of the Department of Veterans Affairs. Scope of work includes hydrostatic and pneumatic pressure testing, thorough leak checks, and full system re-commissioning to ensure operational integrity and compliance with technical standards. All work must be performed at the specified place of performance in Bay Pines, Florida, with exact zip code 33744, and is subject to VA supervision to verify adherence to quality and safety protocols. This is a subcontract opportunity set aside exclusively for Service-Disabled Veteran-Owned Small Businesses as defined by FAR 19.14, with the NAICS code 541340 indicating engineering services. The solicitation was posted on July 31, 2026, and responses are due by September 4, 2026, at 5:00 PM Eastern Time. The contracting office is the 248-NETWORK Contract Office 8 (36C248), and interested parties must submit proposals through the designated SAM.gov portal to be considered.

General Info

Service-Disabled Veteran-Owned small business subcontract for pressure testing and re-commissioning in Bay Pines, Florida.

Agency

Department Of Veterans Affairs → 248-NETWORK Contract Office 8 (36C248)View Agency

NAICS

541340 - Drafting ServicesView NAICS

Place of Performance

Bay Pines, FL, 33744, USA

Set-Aside

SDVOSBC

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 31

subcontract

Response DeadlineSep 4

Submission deadline

Response Deadline

09/04/2026, 05:00:00 PM UTCin about 1 month

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Veterans Affairs → 248-NETWORK Contract Office 8 (36C248)

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Veterans Affairs → 248-NETWORK Contract Office 8 (36C248)

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Hydrostatic or pneumatic pressure testing of repaired piping, leak checks, and system re-commissioning under VA oversight.

Similar Contracts

Same NAICS industry code

Geotechnical Investigation and TestingThe contract titled Geotechnical Investigation and Testing requires the performance of soil borings, laboratory testing, and subsurface analysis to provide essential data for the design of foundations and pavements. The work must be executed to meet technical specifications that ensure accurate characterization of soil conditions, enabling engineers to develop safe and durable structural systems. All testing and analysis procedures must comply with industry standards and be conducted by qualified personnel using calibrated equipment to guarantee reliable results. This is a subcontract opportunity posted by Wilco under the NAICS code 541340, with a response deadline of August 18, 2026, at 3:30 PM. The contract does not specify a set-aside category or organizational type, and the place of performance details including city, state, or zip code are not provided. Interested parties must submit proposals through the designated online portal prior to the deadline, and all work must be completed in accordance with the technical requirements set forth by the contracting entity.

POSTED

DEADLINE

Electrical Testing and Diagnostic ServicesThe contract titled Electrical Testing and Diagnostic Services is a subcontract under NAICS code 541340, issued by the Health and Human Services Commission in Texas, seeking specialized electrical testing services to support both preventive and emergency maintenance operations. The scope of work includes critical diagnostic procedures such as insulation resistance testing, transformer turns ratio analysis, and cable fault detection, all aimed at ensuring the reliability and safety of electrical infrastructure. The solicitation was posted on July 31, 2026, with a response deadline of August 21, 2026, at 4:30 PM, providing potential subcontractors a limited window to submit proposals. While specific location details for performance or point of contact are not provided, the contract is accessible through the Texas SmartBuy portal, indicating it is part of a state-managed procurement system for services supporting public health and human services infrastructure.

Health and Human Services Commission

POSTED

DEADLINE

Geotechnical and Soils Engineering ServicesWilco is seeking a subcontractor to provide geotechnical and soils engineering services for roadway and bridge projects, with a focus on subsurface investigations, soil testing, and the development of foundation recommendations. The contract is targeted at qualified firms capable of delivering technical expertise in geotechnical analysis to support infrastructure design and construction. The solicitation was posted on July 31, 2026, and responses are due by August 18, 2026, at 3:00 PM. The work falls under NAICS code 541340, which classifies it as engineering services, and is structured as a subcontract opportunity without a specified set-aside designation. The place of performance is in Texas, though specific locations are not detailed. Interested parties must submit proposals through the designated portal at the provided link.

POSTED

DEADLINE

Quality Control Plan & Compliance DocumentationA subcontract is being solicited to develop and implement a comprehensive Quality Control Plan aligned with USACE standards, requiring the creation of inspection checklists, conformance reports, and digital submittals to ensure regulatory compliance and operational integrity. The effort involves establishing robust documentation processes that support quality assurance throughout the project lifecycle, with all deliverables must be formatted and submitted electronically in accordance with applicable federal guidelines. The contract is designated as a Small Business Set Aside under NAICS code 541340, meaning only eligible small business concerns may bid, and performance is expected to occur in the 63103 zip code area. Proposals must be submitted by August 24, 2026, with the opportunity posted on July 31, 2026, under the Department of Defense’s W07V Endist St Louis office.

W07V Endist St Louis

POSTED

DEADLINE

EB218-270465 - RFP Osborne Head Coastal Stabilization Option Analysis and Conceptual Design

Solicitation # WS5806059845

The contract concerns an options analysis and conceptual design for coastal stabilization at Osborne Head in Nova Scotia, addressing climate change-induced threats to shoreline stability, critical infrastructure, and the long-term operational viability of the Department of National Defence property. The work must prioritize nature-based solutions wherever feasible and is being procured by Public Services and Procurement Canada on behalf of the Department of National Defence. Only Canadian suppliers and suppliers from eligible trading partners are qualified to submit offers, and all responses must be submitted by 14:00 EDT on August 18, 2026. The solicitation is publicly accessible through the Canada Buys portal, and offerors are permitted to request a debriefing following the evaluation process. All correspondence and inquiries should be directed to Carlos Castillo Nieto, the Contracting Authority, at the provided government email address.

Department of Public Works and Government Services

POSTED

DEADLINE

SCADA and Instrumentation & Controls (I&C) DesignThe contract is for the design of SCADA systems and instrumentation and controls for water and wastewater treatment and distribution facilities in San Diego. The scope includes the development and integration of programmable logic controllers, human-machine interfaces, telemetry systems, and comprehensive cybersecurity measures to ensure reliable and secure operations. All elements must be tailored to meet the operational needs of municipal water infrastructure, with a focus on scalability, data integrity, and regulatory compliance. This is a subcontract opportunity posted by San Diego County, with a response deadline of August 31, 2026. The work is classified under NAICS code 541340, indicating engineering services, and performance will be centered in San Diego. Interested parties must submit proposals prior to the deadline, and the contract is not subject to any specific set-aside provisions. Detailed information and submission guidelines can be accessed through the provided online portal.

San Diego County

POSTED

DEADLINE

in about 1 month

Structural and Seismic Analysis for Water InfrastructureThe contract titled Structural and Seismic Analysis for Water Infrastructure requires the performance of comprehensive structural and seismic evaluations of water tanks, pump stations, and other essential water infrastructure assets located in San Diego. The work is aimed at ensuring full compliance with applicable safety standards and building codes, with a focus on identifying vulnerabilities and recommending necessary upgrades or remediations to maintain operational integrity under seismic events. This subcontract is open to qualified firms capable of delivering technical expertise in structural engineering and seismic analysis specific to water utility systems. The solicitation was posted on July 30, 2026, with a firm deadline for responses set for August 31, 2026. The North American Industry Classification System code for this contract is 541340, indicating it falls under engineering services. The performing location is explicitly designated as San Diego, and the awarding agency is San Diego County within the state of California. Interested parties must submit proposals through the provided external portal, as no point of contact or set-aside information is specified. The contract does not indicate any specific demographic or small business preferences, and all submissions must demonstrate technical capability to meet the performance requirements outlined.

San Diego County

POSTED

DEADLINE

in about 1 month

Arc Flash Hazard Labeling and Documentation ServicesThe contract solicits services to install or replace arc flash hazard labels on electrical panels in accordance with NFPA 70E Section 13, requiring precise labeling that includes fault current levels, arc flash boundary distances, and the required personal protective equipment specifications. All labeling must be supported by detailed engineering calculations and a documented methodology demonstrating compliance with safety standards, ensuring that each label accurately reflects the electrical hazard conditions at the site. The work is to be performed at facilities within Sacramento, California, with a performance address listed as 95827. This subcontract opportunity, categorized under NAICS code 541340, is issued by the California Department of General Services, Facilities Management Division, with bids due by August 19, 2026. The project focuses on enhancing workplace electrical safety through standardized, code-compliant labeling and documentation, requiring contractors to possess technical expertise in electrical systems analysis and adherence to federal safety guidelines. While no set-aside provisions are specified, interested parties must submit proposals prior to the deadline to be considered for award.

Department of General Services, Facilities Management Division (FMD)

POSTED

DEADLINE

Vacuum Bottle Integrity and Timing Tests for Circuit BreakersThe contract requires performing vacuum bottle integrity and timing analysis on circuit breakers to validate their mechanical and electrical performance, arc suppression capabilities, and trip response characteristics in accordance with manufacturer specifications. This work is critical to ensuring the reliability and safety of circuit breaker systems under operational conditions, with testing focused on verifying that components meet established performance benchmarks for critical electrical systems. All testing must be conducted with precision to confirm that vacuum bottles maintain structural integrity and operate within prescribed timing parameters during both normal and fault conditions. The scope of work is tied to a subcontract under the California Department of General Services, Facilities Management Division, with performance taking place in Sacramento, CA, specifically at a facility with ZIP code 95827. The solicitation, posted on July 30, 2026, requires responses by August 19, 2026, and falls under NAICS code 541340, indicating engineering services. The contract emphasizes adherence to technical standards and accurate documentation of test results to support ongoing infrastructure reliability and compliance with operational requirements for electrical systems managed by the state.

Department of General Services, Facilities Management Division (FMD)

POSTED

DEADLINE

High-Potential (Hi-Pot) and Insulation Resistance TestingThe contract requires the performance of high-potential (Hi-Pot) and insulation resistance testing on critical electrical infrastructure including switchgear, transformers, and bus systems to identify insulation degradation and ensure ongoing electrical safety. Testing must strictly adhere to the NETA MTS-2001 standards and all applicable manufacturer specifications to maintain the integrity and reliability of the equipment. These tests are essential for preventing electrical failures, ensuring compliance with safety regulations, and prolonging equipment life in high-voltage environments. The work is to be performed at a designated location in Sacramento, California, with a zip code of 95827, under a subcontract arrangement issued by the California Department of General Services, Facilities Management Division. The solicitation was posted on July 30, 2026, and responses are due by August 19, 2026, with the NAICS code 541340 designating the work under engineering services. All contractors must be prepared to meet rigorous technical and safety benchmarks to qualify for award and successful execution of the testing requirements.

Department of General Services, Facilities Management Division (FMD)

POSTED

DEADLINE

Infrared (Thermal) Imaging and Predictive Maintenance TestingThe contract requires the performance of infrared thermal imaging inspections on electrical systems under a minimum load of 40 percent to detect anomalies such as hot spots and temperature differentials that may indicate potential failures. All inspections must be conducted in strict adherence to ANSI/NFPA 70B standards for predictive maintenance, ensuring accurate identification of thermal irregularities and comprehensive documentation of findings. The contractor is responsible for providing detailed reports that include specific temperature differentials, location of anomalies, and actionable recommendations for corrective measures to prevent equipment downtime or safety hazards. The work is to be performed at a facility in Sacramento, California, with the zip code 95827, under a subcontract arrangement through the California Department of General Services, Facilities Management Division. The solicitation was posted on July 30, 2026, and responses are due by August 19, 2026. The North American Industry Classification System code 541340 indicates this is for professional, scientific, and technical services related to engineering and inspection. The contractor must possess the necessary expertise, equipment, and certification to carry out thermographic assessments reliably and in compliance with industry safety and performance benchmarks.

Department of General Services, Facilities Management Division (FMD)

POSTED

DEADLINE

Pre- and Post-Installation CCTV Inspection & AssessmentThe contract requires conducting professional CCTV inspections of reinforced concrete pipe (RCP) lines both before and after the installation of cured-in-place pipe (CIPP) lining to evaluate the existing condition, detect structural defects, and confirm the integrity of the pipeline following rehabilitation. These inspections must adhere to established industry standards to ensure accurate assessment and documentation of pipe conditions, including cracks, intrusions, corrosion, or misalignments that could impact performance or longevity. The work is performed as a subcontract under the Mississippi Department of Finance and Administration, with the solicitation posted July 30, 2026, and responses due by August 27, 2026, targeting qualified vendors with expertise in pipeline assessment and non-destructive evaluation methods. The North American Industry Classification System code 541340 applies, indicating a focus on architectural and engineering services related to inspection and testing. The place of performance is within Mississippi, though specific locations are not detailed, and the project is part of broader infrastructure maintenance efforts managed by the Mississippi Public Works Authority. Contractors must be prepared to deliver comprehensive reports with visual evidence and defect analysis, ensuring compliance with technical specifications and timelines. All work is expected to support long-term asset management and compliance with state and federal utility infrastructure standards.

POSTED

DEADLINE

More opportunities from Department Of Veterans Affairs → 248-NETWORK Contract Office 8 (36C248)

Same awarding agency

Insulation and Jacketing for Steam PipingThe contract is for the installation of thermal insulation and protective jacketing on repaired steam piping at a facility in Bay Pines, Florida, with the primary objectives of minimizing heat loss and safeguarding personnel from burn hazards. The work is classified under NAICS code 238290 and is set aside exclusively for Service-Disabled Veteran-Owned Small Businesses, ensuring preference is given to qualified veteran-owned contractors. The solicitation was posted on July 31, 2026, with responses due by September 4, 2026, at 5:00 p.m. The contracting office is the 248-NETWORK Contract Office 8 under the Department of Veterans Affairs, indicating this effort supports federal infrastructure maintenance within the VA system. Performance is localized to the Bay Pines area, and the subcontract nature suggests the work may be part of a larger maintenance or renovation initiative tied to VA healthcare or administrative facilities.

Other Building Equipment Contractors

POSTED

DEADLINE

in about 1 month

Piping Material Supply (Steam-Grade Components)The contract is for the supply of carbon steel pipe, fittings, valves, insulation, and hangers specifically engineered for high-pressure steam service, all of which must comply with ASME standards to ensure safety and performance under extreme conditions. The materials are intended for use at a designated performance location in Bay Pines, Florida, with the full scope focused on meeting the rigorous technical requirements of steam systems used in critical infrastructure. All items must be sourced and manufactured to exacting specifications, with quality assurance protocols integrated throughout fabrication and delivery to guarantee compliance and reliability. This is a subcontract under a Service-Disabled Veteran-Owned Small Business (SDVOSB) set-aside, with the NAICS code 423730 indicating the procurement falls under Merchant Wholesalers, Nondurable Goods. The opportunity was posted on July 31, 2026, with a response deadline of September 4, 2026, and is administered by the Department of Veterans Affairs through its 248-NETWORK Contract Office 8. Bidders must be certified SDVOSBs to qualify, and the award will prioritize eligible small businesses owned and controlled by service-disabled veterans. The procurement does not specify a solicitation number but directs interested parties to the SAM.gov workspace for further information and submission details.

Warm Air Heating and Air-Conditioning Equipment and Supplies Merchant Wholesalers

POSTED

DEADLINE

in about 1 month

Manhole Access and Confined Space WorkThe contract governs safe access, ventilation, and egress procedures for working inside manholes during steam pipe repair operations, with strict adherence to confined space safety protocols. It mandates comprehensive permit systems, continuous atmospheric monitoring, and emergency response measures to ensure worker safety in potentially hazardous enclosed environments. All activities must comply with industry-standard confined space regulations and include documented procedures for entry, monitoring, and evacuation. This is a subcontract set aside exclusively for Service-Disabled Veteran-Owned Small Businesses under FAR 19.14, classified under NAICS code 238990. The performance location is Bay Pines, Florida, with a deadline for responses set for September 4, 2026. The contracting office is the Department of Veterans Affairs, 248-NETWORK Contract Office 8, indicating federal oversight of the work, which supports infrastructure maintenance within VA facilities.

All Other Specialty Trade Contractors

POSTED

DEADLINE

in about 1 month

Steam Piping Repair in Manhole (Near Building 1)The contract pertains to the repair of damaged or degraded steam piping located within a manhole near Building 1 at the Bay Pines facility, with work scope encompassing full pipe replacement, reinstallation of thermal insulation, reestablishment of structural supports, and comprehensive pressure testing to ensure system integrity. All tasks must comply with industry standards for steam system restoration and safety, with particular attention to minimizing disruption to surrounding infrastructure and maintaining operational readiness of adjacent systems. The effort is classified as a subcontract and is specifically set aside for Service-Disabled Veteran-Owned Small Businesses, as defined under FAR 19.14, ensuring eligibility is restricted to qualifying SDVOSB entities. The North American Industry Classification System code 238220 applies, reflecting the specialized nature of the work within the plumbing and heating contractor sector. The solicitation was posted on July 31, 2026, with a firm deadline for responses set for September 4, 2026, at 5:00 PM Eastern Time. Performance is designated to occur at the Bay Pines location with a ZIP code of 33744, under the oversight of the Department of Veterans Affairs through its 248-NETWORK Contract Office 8. The contract does not specify a point of contact or detailed address beyond the performance location, and all proposals must align with federal procurement guidelines applicable to SDVOSB set-asides. Contractors must be prepared to demonstrate both technical capability to execute the repair work and verified SDVOSB status to be considered eligible for award.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

DEADLINE

in about 1 month

Supply of Dental Basic Exam Instrument SetsThe contract seeks the supply of 49 units of Hu-Friedy Dental Basic Exam RMD sets or approved equivalent instruments, intended for routine oral examinations and diagnostic procedures within dental care facilities. These sets are specified for use in maintaining standardized, high-quality diagnostic tools across clinical operations, ensuring consistency and reliability in patient care. The procurement is classified as a subcontract under NAICS code 339114, which pertains to surgical and medical instrument manufacturing, indicating the nature of the goods as specialized medical devices. The solicitation was posted on July 31, 2026, with a response deadline set for August 10, 2026, at 6:00 p.m., giving interested parties a defined window to submit proposals. The contracting office is the 248-NETWORK Contract Office 8 (36C248) under the Department of Veterans Affairs, suggesting the end-use is within VA healthcare services. There is no set-aside designation specified, meaning the opportunity is open to all qualified suppliers without restrictions based on business size or demographic criteria. Performance location and point of contact details are not provided, but the instrument sets will be delivered to VA facilities supporting dental health programs. The contract is accessible via the SAM.gov platform for further submission details.

Dental Equipment and Supplies Manufacturing

POSTED

DEADLINE

Supply of Dental Scaling and Root Planing Instrument SetsThe contract solicits the delivery of 20 units of Hu-Friedy Dental Scaling and Root Planing RMD sets, or approved equal alternatives, specifically designed for periodontal treatment and compatible with hospital sterilization protocols. These instrument sets are essential for clinical dental procedures requiring precise scaling and root planing to manage periodontal disease, ensuring compliance with healthcare standards in clinical environments. The equipment must meet rigorous quality and compatibility benchmarks to support the operational needs of dental care units within the Department of Veterans Affairs. The solicitation is posted under the NAICS code 339114 for Surgical and Medical Instrument Manufacturing and is structured as a subcontract under the 248-NETWORK Contract Office 8. The response deadline is August 10, 2026, at 6:00 PM, with the opportunity available for qualified vendors to submit proposals by the specified date. The contract is managed by the Department of Veterans Affairs, and while specific geographic performance details are not provided, the equipment is intended for use in VA healthcare facilities. All submissions must align with the stated technical requirements and be delivered in quantities and configurations that ensure seamless integration into existing clinical workflows.

Dental Equipment and Supplies Manufacturing

POSTED

DEADLINE

Supply of Dental Restorative Instrument SetsThe contract involves the procurement and delivery of 64 units of Hu-Friedy Dental Restorative Reusable Medical Device sets or approved equivalents, all of which must meet stringent medical-grade sterilization standards to ensure safety and compliance in clinical environments. The instruments are intended for dental restorative procedures and must conform to industry specifications for durability, functionality, and sterilization compatibility, ensuring they can be safely reused in healthcare settings without compromising infection control protocols. This is a subcontract under the Department of Veterans Affairs, managed by the 248-NETWORK Contract Office 8, with a solicitation posting date of July 31, 2026, and a response deadline of August 10, 2026. The North American Industry Classification System code 339114 indicates the procurement falls under the manufacturing of surgical and medical instruments. The place of performance and point of contact details are not specified, and the contractual obligation is structured as a subcontract without a specified set-aside classification. The full solicitation can be accessed via the provided SAM.gov link for additional procedural requirements.

Dental Equipment and Supplies Manufacturing

POSTED

DEADLINE

Z1DZ--FY27 NRM (PROJ 516-26-117) BB Repair Steam Piping in Manhole Near Building 1

Solicitation # 36C24827Q0004-1

The project involves the repair of steam piping in a manhole near Building 1 at the Bay Pines VAMC located at 10000 Bay Pines Blvd, St Petersburg, FL 33744, under project number 516-26-117. The contractor is responsible for full site preparation, including demolition and removal of existing structures, and must complete all work in accordance with the statement of work, drawings, and specifications. An organized site visit is scheduled for August 13, 2026, at 10:00 AM EST, and the deadline to submit requests for information was August 21, 2026, at 2:00 PM EST, directed to david.hernandez1@va.gov. The response deadline for proposals is September 4, 2026, at 5:00 PM EST, and all submissions must be made through the solicitation number 36C24827Q0004-1. This contract is exclusively set aside for Service-Disabled Veteran-Owned Small Businesses (SDVOSB) certified under VetCert, as per FAR 19.14, and bidders must be actively registered in both the Small Business Search database and the System for Award Management (SAM.gov) at the time of quote submission. The North American Industry Classification System code for this project is 236220, and the contracting office is the 248-NETWORK Contract Office 8 under the Department of Veterans Affairs, located in Tampa, FL. The primary point of contact for questions is Contracting Specialist David Hernandez, reachable at 813-893-3904 or david.hernandez1@va.gov.

Commercial and Institutional Building Construction

POSTED

DEADLINE

in about 1 month

6520--Dental RMD-Previously 36C24826Q0839

Solicitation # 36C24826Q1047

The contract requires the delivery of 133 name-brand Hu-Friedy Dental Reusable Medical Devices sets to the C.W. Bill Young Veterans Medical Center located at 10000 Bay Pines Blvd. in Bay Pines, Florida. These devices are essential for dental services provided to veterans and must be sourced exclusively from the original manufacturer to ensure compatibility, safety, and adherence to medical standards. The solicitation, designated as 36C24826Q1047, was posted on July 31, 2026, with responses due by 6:00 PM Eastern Time on August 10, 2026. The North American Industry Classification System code 339114 indicates the procurement falls under the category of Surgical and Medical Instrument Manufacturing. This effort is managed by the Department of Veterans Affairs, specifically through the 248-NETWORK Contract Office 8, based in Tampa, Florida. The primary point of contact for inquiries is Michael A. Shook, Contract Specialist, reachable via email at Michael.Shook@va.gov. There is no set-aside designation, meaning all eligible vendors may compete regardless of size or status. The place of performance is fixed at the Bay Pines campus, and all deliveries must meet the specified requirements without exception. Vendors must ensure compliance with all federal procurement regulations and the technical specifications for reusable dental instruments. The opportunity is accessible through the SAM.gov platform under the provided UI link, and bidders are expected to submit proposals that fully address the scope, timing, and quality standards outlined in the solicitation.

Dental Equipment and Supplies Manufacturing

POSTED

DEADLINE

Ammunition Packaging and Domestic Shipment ServicesThe contract requires the packaging and domestic transportation of ammunition in full compliance with federal carrier and safety regulations to ensure secure delivery to Orlando, FL, with a ZIP code of 32827. It encompasses the selection of appropriate containers, the implementation of approved closure methods, and coordination under FOB Destination terms to guarantee responsibility transfers only upon arrival at the designated location. All activities must adhere to stringent safety protocols to mitigate risks associated with hazardous materials during transit. This is a subcontract set aside exclusively for Service-Disabled Veteran-Owned Small Businesses under FAR 19.14, identified by NAICS code 484220 for truck transportation. The solicitation was posted on July 30, 2026, with responses due by August 10, 2026, and is managed by the Department of Veterans Affairs through the 248-NETWORK Contract Office 8. The place of performance is firmly established in Orlando, FL, and the offeror must be certified as a Service-Disabled Veteran-Owned Small Business to be eligible for award.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

Supply of .223 Caliber Duty AmmunitionThe contract is for the supply of 50,000 rounds of .223 caliber long rifle duty ammunition, to be delivered in 100 cases of 500 rounds each, and must meet all applicable SAAMI and law enforcement standards for performance and safety. The solicitation is set aside exclusively for Service-Disabled Veteran-Owned Small Businesses under the SDVOSB program, ensuring priority consideration for eligible firms as defined by FAR 19.14. The NAICS code 332992 applies, indicating the work falls under Other Miscellaneous Fabricated Metal Product Manufacturing. The opportunity is managed by the 248-NETWORK Contract Office 8 under the Department of Veterans Affairs, with performance required at a location in zip code 32827. Responses must be submitted by August 10, 2026, at 7:00 p.m., following the posting date of July 30, 2026. The contract is classified as a subcontract, and no point of contact information is provided in the public data.

Small Arms Ammunition Manufacturing

POSTED

DEADLINE

Supply of 9mm Duty Ammunition (124 Grain JHP)The contract requires the supply of 130,000 rounds of new production 9mm caliber, 124 grain jacketed hollow point (JHP) duty ammunition, fully compliant with SAAMI and law enforcement standards. The ammunition must be delivered in 130 cases, each containing 1,000 rounds, and must meet rigorous performance and safety specifications expected for law enforcement use. The solicitation is designated as a Service-Disabled Veteran-Owned Small Business (SDVOSB) Set-Aside under FAR 19.14, ensuring prioritization for qualifying small businesses owned and operated by service-disabled veterans. The NAICS code 332992 confirms the scope of manufacturing activity covered under this procurement. The contract was posted on July 30, 2026, with a firm response deadline of August 10, 2026, at 7:00 PM. The placing agency is the Department of Veterans Affairs, specifically the 248-NETWORK Contract Office 8 (36C248), and the place of performance is identified with a zip code of 32827. The contract type is classified as a subcontract, indicating it may be issued under a larger prime contract or as part of a broader procurement framework. All bids must adhere to the technical, compliance, and delivery requirements specified, with the expectation of timely fulfillment and adherence to federal procurement protocols.

Small Arms Ammunition Manufacturing

POSTED

DEADLINE