Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

INSULATION COVER, EX

Active
SPE7L1-26-T-917RFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract is for the procurement of 12 insulation covers for exhaust manifolds, identified by NSN 2990-01-113-7887, under solicitation SPE7L1-26-T-917R. Delivery is required within 20 days after award. The technical and quality requirements for this item are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date or award date depending on the size of the acquisition. Packaging must comply with DLA standards, and any non-accepted supplies must have government identification removed. The technical data associated with this item is subject to export controls under either ITAR or EAR, prohibiting unauthorized disclosure to foreign persons, including foreign nationals in the United States, and requiring compliance with DFARS 252.225-7048. Access to this controlled data is restricted to contractors who hold a valid US/Canada Joint Certification Program certification, have completed mandatory DOD export control training, and have been formally approved by DLA. The solicitation was posted on August 5, 2026, with responses due by August 17, 2026, and is managed by the Department of Defense’s Land Supply Chain under NAICS code 336390. Primary contact is Kristina Derry at kristina.derry@dla.mil or 614-692-0158.

General Info

Procure 12 exhaust manifold insulation covers, NSN 2990-01-113-7887, deliver in 20 days, export-controlled, DLA certification required.

Agency

Department Of Defense → LAND SUPPLY CHAINView Agency

NAICS

336390 - Other Motor Vehicle Parts ManufacturingView NAICS

Place of Performance

US

Set-Aside

NONE

Documents

(1)

RFQ SPE7L1-26-T-917R for DLA Land and Maritime

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → LAND SUPPLY CHAIN
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → LAND SUPPLY CHAIN
View Agency Profile
Office AddressUS
Contacts
Kristina Derry
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
INSULATION COVER,EX
INSULATION COVER, EXHAUST MANIFOLD
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ032: EXPORT CONTROL OF TECHNICAL DATA
This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.
The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. NSN/Part Number: 2990-01-113-7887 Quantity: 12 EA Purchase Request: 7017763349QTY: 12 Delivery: 20 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 336390
New
DIBBS
COMPRESSOR, REFRIGERATI
Solicitation # SPE8E8-26-T-5010
This contract is for the procurement of one refrigeration compressor, identified by NSN 4130-01-578-8370 and purchase request 7017756959, with a total quantity of 19 units to be delivered in two line items—one unit and eighteen units respectively. All items must be delivered FOB origin within 137 days of the required delivery date of March 9, 2027, with zero variance allowed in quantity. Inspection and acceptance occur at the destination, and packaging must conform to ASTM D3951, subject to the overriding requirements of the DLA Master List of Technical and Quality Requirements. Packaging and labeling must comply with MIL-STD-129 and palletization must follow RP001 DLA Packaging Requirements. Mercury or mercury-containing compounds are strictly prohibited from direct contact with the hardware except for functional uses in batteries, fluorescent lamps, sensors, controls, weapon systems, or NAVSEA-specified reagents, with portable mercury-containing devices requiring shockproof construction and a secondary containment barrier per NAVSEA 5100-003D. Two delivery addresses are specified: one for Albany, Georgia, and another for Barstow, California, each with designated receiving points. Transportation procedures follow DLAD Proc Notes C19 and C20. The solicitation, issued under contract SPE8E8-26-T-5010, is a Service-Disabled Veteran-Owned Small Business Set-Aside with a response deadline of August 17, 2026, and is managed by the Department of Defense through the Albany Transportation Officer.
ALBANY TRANSPORTATION OFFICER

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 336390
New
DIBBS
BRAKE, SEGMENTED ROTOR
Solicitation # SPE7LX-26-U-9296
The contract specifies the procurement of a brake segmented rotor identified by NSN 2530015567156 and part number RDA-1550-951 from Meritor Heavy Vehicle Systems, LLC, under solicitation SPE7LX-26-U-9296. It is classified as a commercial item and falls under a total small business set-aside. The requirement is for 141 units to be delivered FOB origin within 145 days with no variance allowed in quantity. Delivery is to be made to the destination where inspection and acceptance occur. Packaging must comply with MIL-STD-2073-1E and DLA packaging requirements, including individual packaging with QUP 001, and all items must be preserved using code 89 preservative material to prevent corrosion on bare metal, moving parts, and threads. The packaging also requires barrier wrapping with code GC to prevent surface abrasion and corrosion from contact with blocking and bracing materials, and cushioning using code AD rigid low-density materials or wood and plywood conforming to specified standards. All packaging and marking must adhere to MIL-STD-129 with special marking code ZZ indicating “ARROW UP OPEN THIS SIDE.” Blocking and bracing must be designed to protect against shock and vibration, using materials compatible with the load and item surfaces, with wood and plywood members engineered for strength and easy removal without damage. The item is subject to DLA’s master list of technical and quality requirements referenced by R and I numbers, and all contractual obligations are governed by the version of the master list in effect on the solicitation issuance date.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 2 hours ago

DEADLINE

in 15 days
View Details
NAICS: 336390
New
DIBBS
TRANSFER ASSEMBLY
Solicitation # SPE7L4-26-T-5991
DLA has issued a procurement contract under solicitation SPE7L4-26-T-5991 for the transfer assembly with NSN 2540-01-412-7836, requiring five units to be delivered within 20 days of award. The delivery is FOB destination, with no variance allowed in quantity, and inspection and acceptance occur upon arrival at the destination. Packaging must comply with DLA’s Master List of Technical and Quality Requirements, overriding ASTM D3951, and must conform to MIL-STD-129 labeling and RP001 packaging standards. Hazardous materials must follow TQ requirement IP025 per FED-STD-313; non-hazardous items must be commercially packaged accordingly. All packaging must specify the correct Unit of Issue and Quantity per Unit Pack as stipulated. The delivery address is APO AE 09494-4640, with an alternate freight shipping address at RAF Fairford, Gloucester, UK, and transportation must adhere to DLAD PROC NOTES C19 and C20. The contract mandates the removal of government identification from non-accepted supplies and requires packaging to be palletized per RP001. The original required delivery date is August 3, 2026, with a solicitation response deadline of August 17, 2026, and the primary point of contact is Anna-Rachelle Betts, reachable via DLA email and phone. The NAICS code is 336390, and this is a federal procurement under the Department of Defense for Combat Vehicles and Armament.
LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 336390
New
DIBBS
COMPRESSOR, REFRIGERATI
Solicitation # SPE8E8-26-T-4979
The contract specifies the procurement of a refrigeration compressor under NSN 4130-01-439-2870 and part number ET210L-25073C, supplied by Climate Control Inc of Decatur IL, with a quantity of 40 units to be delivered FOB origin within 71 days of the contract date. The unit price is $40.00 per unit, resulting in a total contract value of $1,600.00, with no allowance for quantity variance. All items must comply with MIL-STD-2073-1E packaging standards, including specific preservation methods, wrapping, and container requirements, and must be marked in accordance with MIL-STD-129 without special marking codes. Delivery is directed to the DLA Distribution facility at New Cumberland, PA, with the same address used for both freight shipping and parcel post. Inspection and acceptance occur at the destination, and the item is subject to DLA packaging and technical requirements referenced via the DLA Master List of Technical and Quality Requirements. The contract is tied to solicitation SPE8E8-26-T-4979, with a response deadline of August 17, 2026, and an original required delivery date of December 14, 2026. The procurement falls under NAICS code 336390 and is managed by the Department of Defense via the DDSP New Cumberland Facility, with Alexis Selby as the primary point of contact.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 336390
New
DIBBS
TRANSPORTABILITY KI
Solicitation # SPE8EF-26-T-1564
This contract under solicitation SPE8EF-26-T-1564 is a total small business set-aside for the procurement of two units of Robertson Fuel Systems part number HM025-200-21, identified by NSN 1740-01-538-3127, with a total contract value of $4.00 at $2.00 per unit. Delivery is required within 167 days after award, with FOB origin terms and no variance allowed in quantity. Inspection and acceptance occur at the destination, and all items must be packaged per ASTM D3951, with precedence given to any conflicting DLA Master List of Technical and Quality Requirements. Packaging, marking, and labeling must strictly comply with MIL-STD-129, and palletization must adhere to DLA Packaging Requirements for Procurement. The delivery destination is the DLA Distribution facility in New Cumberland, Pennsylvania, with the same address used for both freight shipping and parcel post. The need ship date is February 1, 2027, with an original required delivery date of August 4, 2027. Transportation logistics are governed by DLAD Proc Notes C19 and C20. The solicitation was posted on August 5, 2026, with responses due by August 17, 2026, and is managed under NAICS code 336390 by the Department of Defense, with Russell Keiser as the primary point of contact.
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 336390
New
DIBBS
DOOR, VEHICULAR
Solicitation # SPE7L1-26-T-917J
The contract specifies the procurement of a metal swinging door for use on M373A2, M373A3, and M373A4 semitrailers, manufactured via a metal casting process requiring specialized tooling. The item is identified by NSN 2510-01-053-2558 with a quantity of one unit, and delivery is required within 20 days of award. The solicitation number is SPE7L1-26-T-917J, with a response deadline of August 17, 2026, and it is classified under NAICS code 336390. The Defense Logistics Agency enforces strict compliance with technical and quality requirements outlined in its Master List, including configuration change management, quality conformance inspection, and acceptance at origin. Components must meet qualified products or manufacturers list criteria as defined in procurement note H02, and all technical data associated with the item is subject to export controls under ITAR or EAR, restricting disclosure to foreign nationals without prior authorization. Only contractors with approved US/Canada Joint Certification Program status, completed DOD export control training, and DLA authorization may access the controlled technical data. The contract also mandates adherence to DLA packaging requirements and the removal of government identification from non-accepted supplies, with primary point of contact Kristina Derry available for inquiries.
LAND SUPPLY CHAIN

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 336390
New
DIBBS
BLADE, WINDSHIELD WIPER
Solicitation # SPE7L4-26-T-5990
The contract is for the procurement of two windshield wiper blades, each with an overall nominal length of 19 inches, designated by part number F42706 and NSN 2540012811122, supplied by CNH INDUSTRIAL AMERICA LLC. The item is classified as a critical application component and must comply with strict technical and quality standards outlined in the DLA Master List of Technical and Quality Requirements, which supersede all other specifications. The use of Class I ozone-depleting chemicals is strictly prohibited, and any substitute chemicals require prior approval unless explicitly authorized by the specification. Packaging must adhere to DLA Packaging Requirements for Procurement, with non-hazardous items conforming to ASTM D3951 and all packaging labeled per MIL-STD-129. Hazardous materials, if applicable, must follow TQ Requirement IP025. The unit of issue is each, with a firm quantity of two units and no variance allowed. Delivery is required FOB origin within 20 days of contract award to the specified address at Aberdeen Proving Ground, Maryland, using the fastest traceable shipping method, excluding parcel post. Inspection and acceptance occur at the destination, with the required delivery date set for August 3, 2026. All shipment markings, labeling, and palletization must follow mandated government standards.
LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 336390
New
DIBBS
BLADE, WINDSHIELD WI
Solicitation # SPE7L4-26-T-5993
The contract pertains to the procurement of windshield wiper blades identified by NSN 2540-01-523-8370 and part numbers 18-1, 2U2Z17528EA, and LU2Z-17V528-C, with a total quantity of two units to be delivered within 20 days under FOB origin terms. The purchase request number is 7017744580, and the contract is issued under solicitation SPE7L4-26-T-5993 with a required delivery date of August 3, 2026. All packaging and labeling must comply with DLA’s Master List of Technical and Quality Requirements, which take precedence over commercial standards; non-hazardous items must meet ASTM D3951 criteria while hazardous items must adhere to Fed-Std-313 and TQ requirement IP025. Packaging must conform to MIL-STD-129 for marking and labeling, and palletization must follow RP001 DLA Packaging Requirements. The delivery destination is the U.S. Army Logistics Research and Control Team at Aberdeen Proving Ground, Maryland, with shipment required via the fastest traceable means—parcel post is prohibited. The unit price is $2.00 per EA, totaling $4.00, with zero variance allowed in quantity. Inspection and acceptance occur at the destination, and government identification must be removed from any non-accepted supplies. All technical and quality specifications referenced by R or I numbers are incorporated by direct reference to the DLA Master List.
LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 336390
New
Federal
AXLE,VEHICULAR,NOND
Solicitation # N0038326QPB35
This solicitation seeks a single vehicular axle, NIIN 017356339, part number 3733608, under contract number N0038326QPB35, with a response deadline of October 15, 2026. Offers must be submitted via email to dana.n.knittel.civ@us.navy.mil and are subject to government source approval prior to award; unapproved vendors must include all documentation outlined in the NAVSUP WSS Source Approval Brochure, accessible online, or their proposals will be rejected. Early and incremental deliveries are preferred, and the item is classified as noncomplex with a 12-month warranty, defects to be discovered within 60 days of detection. Compliance with Buy American provisions, equal opportunity requirements for workers with disabilities, security exclusions, and other federal mandates is mandatory. The contract incorporates mandatory use of Workflow Pro’s Assist Module and requires adherence to Navy-specific payment and identification protocols. The solicitation is issued by the Department of Defense through Navsup Weapon Systems Support in Philadelphia, Pennsylvania, under NAICS code 336390, and is open to all qualified vendors meeting the stringent sourcing and compliance standards outlined.
Navsup Weapon Systems Support

POSTED

about 7 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 336390
New
DIBBS
Precision Brake Cylinder Manufacturing & Assembly
NAS NORFOLK DETACHMENT

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 336390
New
DIBBS
Towbar Head Supply and Delivery
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

1 day ago

DEADLINE

in 9 days
View Details
NAICS: 336390
New
DIBBS
Small Business Joint Venture or Teaming Partner (WOSB-Focused)
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

1 day ago

DEADLINE

in 14 days
View Details

More opportunities from Department Of Defense → LAND SUPPLY CHAIN

Same awarding agency

NAICS: 332510
New
DIBBS
CLAMP, LOOP
Solicitation # SPE7L1-26-T-917N
This contract, identified by solicitation number SPE7L1-26-T-917N, is for the procurement of 346 units of a clamp and loop component with NSN 5340-01-030-4980, priced at $346.00 per unit, totaling $119,716.00. Delivery is required FOB origin within 119 days, with the original delivery date set for November 25, 2026, and a needed ship date of December 15, 2026. All supplies must comply with stringent technical and quality requirements drawn from the DLA Master List of Technical and Quality Requirements, with specific mandates including MIL-STD-130N for identification marking, MIL-STD-1916 or ASQ H1331 for zero-defect sampling, and strict adherence to packaging standards per MIL-STD-129 and RP001. The use of Class I ozone depleting chemicals is strictly prohibited, and any substitution requires prior approval. Compliance documentation such as the Certificate of Quality Compliance is mandatory, and the Certificate of Conformance procedures under FAR 52.246-15 are authorized unless overridden by a Quality Assurance Letter of Instruction. The item must be shipped to the designated delivery point at DLA District San Joaquin, 25600 S Chrisman Road, Rec Whse 57, Tracy, CA 95304-5000, with packaging requirements depending on hazardous material status per FED-STD-313: non-hazardous items follow ASTM D3951 unless superseded by DLA requirements, while hazardous items must comply with TQ requirement IP025. Palletization must conform to DLA packaging guidelines, and all packaging and labeling must meet MIL-STD-129 with correct Unit of Issue and Quantity per Unit Pack as specified. The contract mandates full and open competition with no set-asides, and all technical data and revisions referenced, including TDP Rev A Gen 1 based on drawing NR 19207, take precedence. Transportation directives are governed by DLAD Proc Notes C19 and C20, and the official point of contact for procurement inquiries is Isabelle Szulewski, reachable via email and phone listed in the contract.
Hardware Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 339991
New
DIBBS
GASKET
Solicitation # SPE7L1-26-T-916W
The contract is for the procurement of a gasket item identified by NSN 5330-01-557-0920 and part number X-113BT, with a requirement of 600 feet delivered in continuous lengths. The unit of issue is the foot, with the order unit being a roll of 500 feet, and delivery must occur within five days of award. Delivery is FOB origin, and the quantity allowable variance is plus 10 percent with zero tolerance for reduction. Inspection and acceptance are both conducted at the destination. Packaging must comply with MIL-STD-2073-1E, using black plastic for preservation, with no cushioning or dunnage, and markings must follow MIL-STD-129 with no special handling codes. The item is not classified as hazardous, but shipment must be sent by the fastest traceable method, explicitly prohibiting parcel post. The destination for delivery is the Distribution Management Office at MCLB Albany, Georgia. The gasket is sourced from approved vendors including Trim-Lok Inc, Charleston Rubber & Gasket Co Inc, and General Dynamics Land Systems. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced in the contract. The contract is issued under solicitation SPE7L1-26-T-916W, with a response deadline of August 17, 2026, and an original required delivery date of August 6, 2026. The NAICS code is 339991, and the contracting activity falls under the Department of Defense’s Land Supply Chain.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332510
New
DIBBS
BRACKET, MOUNTING
Solicitation # SPE7L1-26-Q-1458
The item specified is a mounting bracket with NSN/Part Number 5340-01-670-3301, with a quantity of one unit and a delivery requirement of 159 days after order. Technical and quality requirements referenced in this solicitation are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless an amendment supersedes it. Packaging must comply with DLA packaging standards, and non-accepted supplies must be stripped of all government identification prior to return. Technical data associated with this item is subject to export controls under either ITAR or EAR, prohibiting any export or disclosure to foreign persons without prior authorization from the Department of State or Department of Commerce, including foreign national employees and foreign subsidiaries of U.S. firms. Access to this controlled data is restricted only to DLA contractors with an approved US/Canada Joint Certification Program certification, who have completed mandatory DOD export control training and the DLA Export-Controlled Technical Data Questionnaire, and have received formal approval from the DLA controlling authority. The solicitation number is SPE7L1-26-Q-1458, posted on August 5, 2026, with responses due by August 12, 2026, and the North American Industry Classification System code is 332510. Performance is required at Oak Harbor, WA 98278-5200, and inquiries should be directed to Vittorio Tambaro at the provided contact details.
Hardware Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334419
New
DIBBS
WIRING HARNESS, BRANCHE
Solicitation # SPE7L1-26-T-917E
The contract is for a single unit of a branched wiring harness identified by NSN 6150-01-586-5212 and part number 3754508, issued under solicitation SPE7L1-26-T-917E to OSHKOSH DEFENSE LLC. Delivery is required within 10 days FOB origin to Fort Sill, Oklahoma, with no variance permitted in quantity. The item must be packaged in compliance with ASTM D3951 and labeled per MIL-STD-129, with palletization meeting DLA’s packaging requirements, and all packaging must adhere to the DLA Master List of Technical and Quality Requirements, which take precedence over any other standard. Sampling for quality assurance must follow MIL-STD-1916 or an equivalent zero-based plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively, and acceptance requires zero non-conformances unless otherwise specified. The contractor must comply with Cybersecurity Maturity Model Certification (CMMC) Level 2 self-assessment requirements and is subject to Covered Defense Information protocols under RD002. Item Unique Identification is not required per customer request. Shipment must be sent by the fastest traceable means, excluding parcel post, to the specified delivery address with the RDD 555 designation, and all markings must include the referenced mail forward and vendor details. The original required delivery date is August 3, 2026.
Other Electronic Component Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 336310
New
DIBBS
O-RING
Solicitation # SPE7L1-26-T-917D
This contract specifies the procurement of a single O-RING with National Stock Number 5331-01-670-1000 and part number 2403/0252, supplied by JCB INC, under solicitation SPE7L1-26-T-917D. The item must be delivered in strict compliance with MIL-DTL-117, Type II, Class C, Style 1 packaging standards, requiring medium duty, waterproof, greaseproof, and opaque packaging to protect against UV degradation, applicable to direct vendor delivery, foreign military sales, and stock shipments. All packaging and marking must adhere to MIL-STD-2073-1E and MIL-STD-129, including special labeling with code 20–20 “Do not bend,” and palletization as outlined in DLA packaging requirements. The delivery is FOB origin with zero variance tolerance, inspection and acceptance occurring at the destination, and shipment must be traceable—parcel post is prohibited. The required delivery date is August 3, 2026, with a 20-day lead time, and the item must be sent to the defense logistics agency warehouse in Johnston, Iowa, under government control codes and shipping instructions. The contract integrates referenced technical and quality standards from the DLA Master List, and includes compliance requirements for hazardous materials packaging under IP025, along with data handling protocols for covered defense information. The unit of issue is each (EA), priced at $1.00, with a total contract value of $1.00. Special handling instructions include preservation method 33, dry climate control, and specific container types with no cushioning material. The point of contact is Kristie Fown, and the solicitation was posted on August 5, 2026, with responses due by August 17, 2026. This procurement is categorized under NAICS 336310, managed by the Department of Defense’s Land Supply Chain, and is subject to federal acquisition regulations and DLA-specific administrative protocols, including government-only metadata fields and traceability markers.
Motor Vehicle Gasoline Engine and Engine Parts Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332510
New
DIBBS
BRACKET, ANGLE
Solicitation # SPE7L1-26-T-917U
This contract is for the procurement of one bracket, angle with NSN 5340-01-537-5042 and part number 3471822 from Oshkosh Defense LLC, under solicitation SPE7L1-26-T-917U. The item is a critical application component required for delivery within 20 days of contract award, with FOB origin terms and no variance allowed in quantity. Delivery must be made to NMCB 4 at Port Hueneme, California, with shipping required via traceable means only—parcel post is prohibited. All packaging must comply with DLA’s master requirements, including MIL-STD-129 for labeling and either ASTM D3951 for non-hazardous materials or TQ requirement IP025 if hazardous under Fed-Std-313, with DLA’s technical and quality requirements taking precedence over any commercial standards. The use of class I ozone-depleting chemicals is strictly prohibited, and any substitutions must be pre-approved. The contract enforces strict compliance with DLA packaging and procurement protocols, including specific unit of issue and quantity per unit pack details, and requires palletization in accordance with RP001. The point of contact is Kristina Derry of the Department of Defense’s Land Supply Chain, with the delivery destination and shipping instructions clearly defined. The required delivery date is July 15, 2026, and all documentation must reflect the approved solicitation revision in effect at the award date. The item must be marked and tracked using the provided traceable control number and project identifier, and government-specific coding such as IPD 13 and DIC A4A must be applied. The solicitation was posted on August 5, 2026, with responses due by August 17, 2026, under NAICS code 332510 for metal fabrication.
Hardware Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332994
New
DIBBS
GOVERNMENT FIRST ARTIC
Solicitation # SPE7L1-26-Q-1455
This contract solicits four units of a critical gun part designated as a lever and shaft, with unique technical and quality requirements governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers. The item is classified as a defense article under the International Traffic in Arms Regulations and the Arms Export Control Act, mandating that all manufacturers or exporters register with the Directorate of Defense Trade Controls; failure to provide proof of registration will render an offer ineligible. Government First Article Testing is required, and offerors may be contacted post-submission to price the FAT requirement. Two exhibits must be submitted: one fully assembled and coated unit and one machined but unassembled, uncoated unit. The NSN is 0001S00000052, with a delivery schedule of 281 days after contract award. The solicitation number is SPE7L1-26-Q-1455, issued on August 5, 2026, with responses due by August 14, 2026, under the Department of Defense’s Land Supply Chain, with performance at Hill AFB, Utah. The contracting office point of contact is Zane Zwayer, reachable via email and phone listed in the contract data.
Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 9 days
View Details
NAICS: 336310
New
DIBBS
PARTS KIT, FUEL TANK
Solicitation # SPE7L1-26-T-917P
The contract specifies the procurement of a Parts Kit for a Fuel Tank, with a quantity of 113 units identified by NSN 2910-01-292-3253 and purchase request number 7016266849. Delivery is required within 49 days after delivery order issuance, and the solicitation was posted on August 5, 2026, with responses due by August 17, 2026. The item falls under NAICS code 336310 and is managed by the Department of Defense’s Land Supply Chain through the Defense Logistics Agency. Technical and quality requirements referenced in the contract are governed by the DLA Master List of Technical and Quality Requirements, with specific revisions controlled by the solicitation or award date depending on acquisition size. Packaging must comply with DLA standards, and all supplies must have government identification removed if rejected. The contract is subject to Covered Defense Information rules and mandates CMMC Level 2 certification for third-party assessors. Technical data associated with this item is export-controlled under ITAR or EAR, requiring prior authorization for any disclosure to foreign persons, including subsidiaries and overseas employees, and is restricted to contractors with approved US/Canada Joint Certification Program status, completed DOD export control training, and DLA authorization. The place of performance is Anniston, Alabama, 36201-4199, with Rita Hughes of DLA listed as the primary point of contact.
Motor Vehicle Gasoline Engine and Engine Parts Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332510
New
DIBBS
PLUNGER, DETENT
Solicitation # SPE7L1-26-T-917S
The contract is for the procurement of 200 units of a PLUNGER, DETENT with NSN 5340-00-782-1762 under solicitation SPE7L1-26-T-917S, issued by the Department of Defense through the Land Supply Chain office. Delivery is required within five days of award, FOB origin, with no tolerance for variance in quantity and inspection and acceptance occurring at the origin. Packaging must comply with MIL-STD-2073-1E, including specific methods for preservation, wrapping, and containerization, and marking must follow MIL-STD-129 without special coding. The item must conform to Technical Data Package Rev A, referenced to drawing number 19207-10949808 Revision B dated January 1, 1999, and all technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements accessible via the official DLA website. The contract prohibits the use of Class I ozone-depleting chemicals in any form and mandates that any substitute chemicals require prior approval unless explicitly authorized by the specifications. Inspection and acceptance criteria follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated, and verification levels for critical, major, and minor attributes are set at VII, IV, and II respectively. A Certificate of Conformance is authorized under FAR 52.246-15 unless overridden by a quality assurance letter. The end recipient is the Government of Israel Ministry of Defense, with delivery coordinated through the freight forwarder InterGlobal FWRD SV Inc Co G&B PKG Co in Jersey City, NJ, and the primary point of contact is Forsan Saad. The required delivery date is June 1, 2026, with the solicitation posted on August 5, 2026, and responses due by August 17, 2026. Configuration control and potential deviations require an Engineering Change Proposal or formal variance request, and covered defense information protocols apply.
Hardware Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332510
New
DIBBS
BRACKET, MOUNTING
Solicitation # SPE7L1-26-T-917T
The item specified is a mounting bracket identified by NSN/Part Number 5340-01-628-3279, with a quantity of eight units required under purchase request 7016687716. The delivery is due within 77 days after award, and the solicitation is issued under contract number SPE7L1-26-T-917T, with a response deadline of August 17, 2026. The procurement is governed by Defense Logistics Agency requirements, including technical and quality standards referenced through R and I numbers in the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue or award date depending on acquisition size. The item is subject to export control under ITAR or EAR, restricting any transfer of technical data to foreign persons or entities without prior authorization from the Department of State or Commerce, and compliance with DFARS 252.225-7048 is mandatory. Only contractors with approved US/Canada Joint Certification Program status, completed DOD export control training, and DLA authorization are permitted to handle the technical data. The place of performance is in New Cumberland, Pennsylvania, with the contracting office under the Department of Defense’s Land Supply Chain, and inquiries should be directed to Isabelle Szulewska at the provided contact information.
Hardware Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332613
New
DIBBS
SPRING, HELICAL, COMP
Solicitation # SPE7L1-26-T-916U
The contract pertains to the procurement of one helical compression spring identified by NSN 5360-01-339-0693 and part number A51091MDX, supplied by HUNT VALVE COMPANY, INC. Delivery is required within 20 days to the destination FOB, with no tolerance for quantity variance, and inspection and acceptance occur at the delivery point. The item must comply with DLA packaging standards per MIL-STD-2073-1E and MIL-STD-129, including specific packaging methods, containment, and marking procedures, with no special marking required. Packaging must be palletized according to DLA requirements, and shipment is designated for vessel delivery to USS BOXER LHD 4 at FPO AP 96661 under DLAD procedures C19 and C20. The contract strictly prohibits intentional introduction of mercury or mercury-containing compounds into the supplied hardware, except for specified functional uses such as batteries, fluorescent lamps, sensors, or weapon systems, with additional containment requirements for portable devices as defined by NAVSEA 5100-003D. The solicitation number is SPE7L1-26-T-916U, with a response deadline of August 17, 2026, and the required delivery date is August 3, 2026. Technical and quality standards referenced in the DLA Master List are incorporated by reference, with compliance determined based on the revision in effect on the solicitation or award date. The contract is administered by the Department of Defense’s Land Supply Chain, with Kristina Derry as the primary point of contact.
Spring Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332510
New
DIBBS
SPRING, HELICAL, COMP
Solicitation # SPE7L1-26-T-916L
This contract specifies the procurement of two helical compression springs with part number 41001657 and NSN 5360-00-566-6315, furnished under solicitation SPE7L1-26-T-916L. The springs must adhere to strict technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, with compliance controlled by the revision in effect on the solicitation issue date. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, including specific preservation methods, packaging levels, and marking guidelines. No mercury or mercury-containing compounds may be intentionally added or come into direct contact with the springs, except for functional uses in batteries, lighting, instruments, sensors, controls, weapon systems, or NAVSEA-specified reagents, with portable mercury-containing devices requiring shockproof construction and secondary containment as per NAVSEA 5100-003D. The items are to be delivered FOB origin within 20 days, with no tolerance for quantity variance. Delivery is to the Taiwan Army Zuo-Ying Ammunition Sub-Depot in Kaohsiung City, with no special marking required beyond standard military specifications. The contract mandates that all supplies be shipped without Government identification if rejected, and applies Covered Defense Information requirements as applicable. The unit of issue is each, with a total price of $2.00 for two units, and the freight forwarding and transportation procedures follow DLAD Proc Notes C19 and C20. The point of contact is Kristina Derry of the Department of Defense’s Land Supply Chain, with responses due by August 17, 2026. The original required delivery date is August 7, 2026, and the contract is governed by the DoD’s authorized procurement framework, incorporating all relevant DLA packaging, inspection, and acceptance protocols applicable at origin. The NAICS code is 332510, and the solicitation is open to federal contractors under a standard commercial item acquisition process.
Hardware Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details