Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, September 2 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

INSULATION SHEET, EL

Active
SPE4A6-26-T-24JHFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract is a solicitation for one unit of an electrical insulation sheet, identified as a commercial off the shelf item with part number 1000AG3285-1 and NSN 5970015865826. The procurement is managed by the Department of Defense ASC Commodities Division, with a required delivery timeframe of 20 days after order. Shipping is designated as FOB Origin, with both inspection and acceptance occurring at the destination. The item must be delivered to the Aviation Support Detachment in Fort Worth, Texas, using the fastest traceable means. Compliance with specific military standards is required, including MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. Additionally, the supplier must adhere to DLA packaging requirements and technical quality standards as specified in the master list of requirements.

General Info

DoD solicitation for one electrical insulation sheet delivered to Fort Worth within 20 days.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

335932 - Noncurrent-Carrying Wiring Device ManufacturingView NAICS

Place of Performance

1251 MILITARY PARKWAY, FORT WORTH, TX, 76127-1251, USA

Set-Aside

NONE

Documents

(1)

SPE4A6-26-T-24JH.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC COMMODITIES DIVISION
Contacts1 person available
OfficeUSA
Organization / Agency
Department Of Defense → ASC COMMODITIES DIVISION
View Agency Profile
Office AddressUSA
Contacts
Marcita Robinson
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
INSULATION SHEET,EL
INSULATION SHEET,EL
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
THIS ITEM IS IDENTIFIED AS A COMMERCIAL OFF THE SHELF (COTS) ITEM
AVIATION GROUND EQUIPMENT CORP 0TZM0 P/N 1000AG3285-1
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7018027158 0001 EA 1.000
NSN/MATERIAL:5970015865826
DELIVERY (IN DAYS):0020
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00
SPE4A6-26-T-24JH
SECTION B
PR: 7018027158 PRLI: 0001 CONT’D
WRAP MAT:EA CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0
UNIT CONT:E5 OPI:M
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
N54075
CFLSW ASD DET FORT WORTH
1251 MILITARY PARKWAY
FORT WORTH TX 76127-1251
US
RDD 777 SHIPMENT. SHIP BY FASTEST TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
N54075
AVIATION SUPPORT DETACHMENT
1251 MILITARY PARKWAY
FORT WORTH TX 76127-1251
US
M/F: (TCN) N540756197D91B
RDD: 777
PROJ: BK0 TP 2
SUPP ADD: YSE930 SIG: A
FOR GOVERNMENT USE ONLY: (IPD) 06
DIC: A4A DIST: 9B ADV: FC: KB
Need Ship Date:00/00/0000 Original Required Delivery Date:00/00/0000
SPE4A6-26-T-24JH NSN/Part Number: 5970-01-586-5826 Quantity: 1 EA Purchase Request: 7018027158QTY: 1 Delivery: 20 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 335932
New
DIBBS
CABLE ASSEMBLY AND REEL
Solicitation # SPE4A6-26-R-XC95
This contract is a firm fixed price solicitation for the procurement of 31 cable assemblies and reels, identified by NSN 5995-01-549-7644. The items are designated as critical application items and must adhere to specific technical data and part number requirements from L3Harris Global Communications and DCX-Chol Enterprises. Delivery is required within 234 days after order, with inspection and acceptance occurring at the origin. The agreement mandates strict compliance with several quality and security standards, including CMMC Level 2 self-assessment and the protection of covered defense information. Packaging and marking must follow MIL-STD-129 and DLA procurement requirements, while sampling and inspection must align with MIL-STD-1916 or ASQ H1331. This is a total small business set-aside managed by the Department of Defense ASC Commodities Division.
ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

in 14 days
View Details
NAICS: 335932
New
DIBBS
Manufacture and Supply of Lever Switch (NSN 5930013893080)
ELECTRICAL DEVICES DIV

POSTED

1 day ago

DEADLINE

in 11 days
View Details
NAICS: 335932
New
DIBBS
Supply of Electrical Insulation Tape (NSN: 5970015885080)
AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 335932
New
DIBBS
SWITCH, LEVER
Solicitation # SPE7M8-26-T-6324
This solicitation, issued by the Department of Defense Electrical Devices Division under solicitation number SPE7M8-26-T-6324, is for the procurement of 19 lever switches, identified by NSN 5930-01-389-3080. The contract requires delivery within 102 days after receipt of order, with performance taking place in New Cumberland, Pennsylvania. The agreement is subject to specific DLA packaging requirements and technical quality standards as outlined in the DLA Master List. Additionally, the contract mandates the removal of government identification from any non-accepted supplies. Offerors must provide a complete data package for both approved and alternate parts to be considered for the award.
ELECTRICAL DEVICES DIV

POSTED

1 day ago

DEADLINE

in 11 days
View Details
NAICS: 335932
New
DIBBS
TAPE, INSULATION, ELECTR
Solicitation # SPE4A0-26-T-4514
This contract is for the procurement of one unit of electrical insulation tape, identified by NSN 5970-01-588-5080 and part number 3304920 from Olympus America Inc. The item is designated as a critical application item with a shelf life of 18 months. Delivery is required within 5 days after order, with the original required delivery date set for August 24, 2026. The shipment is to be delivered FOB origin to Fairchild AFB in Washington using the fastest traceable means. Quality assurance is governed by strict sampling methods according to MIL-STD-1916 or ASQ H1331, requiring zero non-conformances for acceptance. The contract mandates specific packaging and marking standards per MIL-STD-2073-1E and MIL-STD-129, including a Type II shelf life marking. Inspection and acceptance are to be conducted at the origin, and the agreement incorporates the DLA Master List of Technical and Quality Requirements.
AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 335932
New
DIBBS
INSULATION SLEEVING
Solicitation # SPE4A6-26-T-20TT
This solicitation, issued by the Department of Defense ASC Commodities Division under solicitation number SPE4A6-26-T-20TT, is for the procurement of 24 feet of insulation sleeving, identified by part number 77C959296P3 and national stock number 5970-01-606-6156. The contract requires delivery within 163 days after receipt of order and is categorized under NAICS code 335932. Performance is designated for Tracy, California, with the primary point of contact being Bradley Willis. The contract includes stringent compliance requirements, including CMMC Level 2 certification for third-party assessment organizations and adherence to DLA packaging and physical identification marking standards. Due to the nature of the technical data, this procurement is subject to strict export controls under ITAR and EAR regulations. Access to this data is limited to contractors with approved US/Canada Joint Certification Program certification and those who have completed the required Department of Defense export-controlled technical data training and questionnaires.
ASC COMMODITIES DIVISION

POSTED

1 day ago

DEADLINE

in 4 days
View Details
NAICS: 335932
New
DIBBS
INSULATION SLEEVING
Solicitation # SPE4A7-26-T-053T
This solicitation, issued by the Department of Defense ASC Supplier Oper AE and AF Div, is for the procurement of two units of insulation sleeving under NSN 5970-01-717-4313. The contract requires delivery within 20 days after receipt of order and is categorized under NAICS code 335932. Performance is designated for Port Hueneme, California. The agreement incorporates several critical technical and quality requirements, including DLA packaging standards and specific guidelines for item marking and the removal of government identification from non-accepted supplies. Notably, the contract is subject to strict export controls under ITAR and EAR regulations. Access to technical data is limited to contractors with approved US/Canada Joint Certification Program certification and completed Department of Defense export-controlled data training.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

1 day ago

DEADLINE

in 4 days
View Details
NAICS: 335932
New
DIBBS
INSULATOR, STANDOFF
Solicitation # SPE4A6-26-T-20EH
This contract is for the procurement of 116 units of standoff insulators, identified as NSN 5970-00-142-1840 and part number 2165-1A from Mar-Bal, Inc. The item is classified as a commercial critical application item with no shelf life requirement. Delivery is required within 169 days, with a required delivery date of November 29, 2026, and a need ship date of February 12, 2027. The shipment is designated as FOB Origin with inspection and acceptance occurring at the destination. The agreement mandates strict adherence to DLA packaging and marking requirements, specifically MIL-STD-129 and MIL-STD-2073-1E, including special glass handling markings. Quality assurance must follow MIL-STD-1916 or ASQ H1331 sampling plans. Additionally, the contract prohibits the intentional addition of mercury or mercury-containing compounds to the hardware, except in specific functional cases approved by NAVSEA. All technical and quality requirements are governed by the DLA Master List.
ASC COMMODITIES DIVISION

POSTED

1 day ago

DEADLINE

in 3 days
View Details
NAICS: 335932
New
DIBBS
INSULATOR, PLATE
Solicitation # SPE4A6-26-T-92B5
This solicitation, identified as SPE4A6-26-T-92B5 and issued by the Department of Defense ASC Commodities Division, is for the procurement of three insulator plates under NSN 5970-01-705-7470. The contract requires delivery within 20 days after receipt of order to Port Hueneme, California. The procurement is governed by NAICS code 335932 and incorporates the DLA Master List of Technical and Quality Requirements, including specific mandates for packaging, physical identification, and the removal of government identification from non-accepted supplies. Quality assurance must adhere to MIL-STD-1916 or ASQ H1331 sampling methods, with specific AQL levels assigned to critical, major, and minor attributes. The contract is subject to strict security and legal constraints, including Covered Defense Information (CDI) protections and export controls under ITAR and EAR regulations. Access to technical data is restricted to approved contractors with US/Canada Joint Certification Program certification and completed Department of Defense export-control training.
ASC COMMODITIES DIVISION

POSTED

1 day ago

DEADLINE

in 4 days
View Details
NAICS: 335932
New
DIBBS
ROD SECTION, GROUND
Solicitation # SPE4A6-26-T-20AH
This contract is a solicitation issued by the Department of Defense, specifically the ASC Commodities Division, for the procurement of 78 units of ground rod sections under NSN 5975015526937. The item is identified as a critical application item with part number T295146 from HDT Expeditionary Systems Inc. The delivery is required within 169 days after order, with a need ship date of February 12, 2027, and an original required delivery date of February 3, 2027. Shipping is designated as FOB Origin, with both inspection and acceptance occurring at the destination, which is the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. The procurement is governed by the DLA Master List of Technical and Quality Requirements, including specific mandates for packaging, physical identification, and the removal of government identification from non-accepted supplies. Packaging must adhere to RP001 and MIL-STD-129, with hazardous materials following TQ requirement IP025 and non-hazardous materials following ASTM D3951. Quality assurance and sampling must comply with MIL-STD-1916 or ASQ H1331, utilizing a zero-based sampling plan. The solicitation is managed through the DIBBS system and falls under NAICS code 335932.
ASC COMMODITIES DIVISION

POSTED

1 day ago

DEADLINE

in 3 days
View Details
NAICS: 335932
New
DIBBS
TAPE, INSULATION, ELECTR
Solicitation # SPE4A6-26-T-24BU
This contract is for the procurement of electrical insulation tape, identified as a critical application commercial item under NSN 5970013359128. The requirement is for 45 rolls of tape, each measuring 30 feet in length, 1 inch in width, and 0.0300 inches in thickness. The order is specified for part number 22002212 from Plymouth Rubber Europa, S.A.U. Delivery is required within 160 days, with FOB Origin shipping and inspection and acceptance occurring at the destination. The contract mandates strict adherence to DLA packaging requirements, MIL-STD-129 marking, and specific sampling methods such as MIL-STD-1916 or ASQ H1331. Additionally, the supplier must ensure that no mercury or mercury-containing compounds are intentionally added to the hardware, in accordance with NAVSEA standards.
ASC COMMODITIES DIVISION

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 335932
New
SLED
146510 FIBERGLASS POLE
Solicitation # 231687
The Los Angeles Department of Water and Power is seeking bids for the procurement of fiberglass poles under solicitation number 231687. This opportunity is categorized under NAICS code 335932 and will be performed in Los Angeles, California. Romel L. Prescott serves as the primary point of contact for this requirement. Interested parties must submit their bids electronically through the Electronic Request Solicit Procure system, as hard copy or mail-in submissions will not be accepted. The solicitation was posted on August 27, 2026, and the deadline for all responses is September 9, 2026, at 9:00 PM.
Water & Power

POSTED

1 day ago

DEADLINE

in 12 days
View Details

More opportunities from Department Of Defense → ASC COMMODITIES DIVISION

Same awarding agency

NAICS: 332722
New
DIBBS
NUT, SELF-LOCKING, DOUBLE HEXAGON
Solicitation # SPE4A6-26-R-XC90
This solicitation from the Department of Defense ASC Commodities Division is for the procurement of 14,268 self-locking double hexagon nuts under NSN 5310-01-099-6538. The contract is a total small business set-aside with a delivery requirement of 615 days after order. The agreement mandates strict adherence to DLA packaging requirements and SAE AS9100 higher-level quality standards. Due to the nature of the technical data, the contract is subject to ITAR and EAR export controls, requiring contractors to have an approved US/Canada Joint Certification Program certification and completed export-control training to access sensitive information.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 10 days
View Details
NAICS: 335931
New
DIBBS
LEAD, ELECTRICAL
Solicitation # SPE4A6-26-R-XD06
This contract is a firm fixed price solicitation for the procurement of 2,400 electrical leads, identified by NSN 6150-01-423-8620 and part number M83413/8-E00CX. The items are designated as critical application items and must comply with specific technical and quality requirements, including MIL-DTL-83413/8F and the Qualified Products List or Qualified Manufacturers List. Delivery is required within 129 days after order, with inspection and acceptance occurring at the destination and shipping handled as FOB origin. The agreement mandates strict adherence to DLA packaging requirements under RP001 and marking standards per MIL-STD-129. Quality assurance is governed by zero-based sampling plans such as MIL-STD-1916 or ASQ H1331, with specific verification levels assigned to critical, major, and minor attributes. This procurement is designated as a total small business set-aside and is managed by the Department of Defense ASC Commodities Division.
Current-Carrying Wiring Device Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 14 days
View Details
NAICS: 335999
New
DIBBS
CABLE ASSEMBLY, RADIO FREQUENCY
Solicitation # SPE4A6-26-R-XD12
This solicitation, issued by the Department of Defense ASC Commodities Division under solicitation number SPE4A6-26-R-XD12, is for the procurement of 240 radio frequency cable assemblies, identified by NSN 5995-01-678-2650. The contract is a total small business set-aside with a required delivery timeline of 237 days after the order is placed. Technical and quality requirements are governed by the DLA Master List, with the applicable revision determined by the solicitation or award date depending on the acquisition size. A critical component of this contract is the strict adherence to export control regulations. The technical data associated with these assemblies is subject to ITAR or EAR restrictions, meaning it cannot be exported or disclosed to foreign persons without prior authorization from the Department of State or Commerce. To access this data, contractors must possess an approved US/Canada Joint Certification Program certification, complete specific DLA export-control training, and submit a required questionnaire for approval by the controlling authority.
All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 14 days
View Details
NAICS: 335931
New
DIBBS
WIRING HARNESS, BRANCHED
Solicitation # SPE4A6-26-R-XD15
This solicitation, issued by the Department of Defense ASC Commodities Division under number SPE4A6-26-R-XD15, is for the procurement of 56 branched wiring harnesses, identified by NSN 6150-01-606-8146. The required delivery timeframe is 225 days after the order is placed. The contract incorporates specific technical and quality requirements maintained in the DLA Master List, with the applicable revision determined by the solicitation or award date depending on the acquisition size. A critical component of this contract is the strict adherence to export control regulations. The technical data associated with this item is subject to ITAR or EAR restrictions, meaning it cannot be exported or disclosed to foreign nationals without prior authorization from the Department of State or Commerce. To access this data, contractors must possess an approved US/Canada Joint Certification Program certification and complete mandatory DLA training and questionnaires.
Current-Carrying Wiring Device Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 14 days
View Details
NAICS: 332722
New
DIBBS
RECEPTACLE, TURNLOCK FASTENER
Solicitation # SPE4A6-26-R-XD18
This contract is a firm fixed price solicitation for 528 turnlock fastener receptacles, identified by NSN 5325-01-135-6814. The items are designated as critical application items and must adhere to specific technical and quality requirements, including TDP Rev B Gen 3 and reference drawing 76301 3M304. The procurement involves strict quality assurance standards, utilizing zero-based sampling plans per MIL-STD-1916 or ASQ H1331, and requires compliance with DLA packaging and marking standards such as ASTM D3951 and MIL-STD-129. The delivery timeline is set for 60 days after the order is placed, with inspection and acceptance occurring at the destination. This is a total small business set-aside managed by the Department of Defense ASC Commodities Division. Key administrative requirements include the removal of government identification from non-accepted supplies and adherence to configuration change management protocols. Item Unique Identification is not required for this specific order.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 14 days
View Details
NAICS: 335999
New
DIBBS
BRUSH, ELECTRICAL CONTACT
Solicitation # SPE4A6-26-R-XD04
This contract is for the procurement of 4,000 electrical contact brushes under a firm fixed price agreement. The items are designated as critical application commercial items and must be manufactured using carbone grade L560, as substitutions are not authorized. Each brush must be individually marked with the manufacturer's brush grade. The contract specifies a delivery timeline of 194 days after order, with inspection and acceptance occurring at the destination. Quality assurance and sampling must adhere to MIL-STD-1916 or ASQ H1331, with a zero-nonconformance requirement for acceptance. Packaging must comply with ASTM D3951 and MIL-STD-129, while palletization must follow DLA packaging requirements. The procurement identifies Honeywell International Inc. and Mersen USA PTT Corp as relevant part number sources.
All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 14 days
View Details
NAICS: 332510
New
DIBBS
STUD ASSEMBLY, TURNLOCK FASTENER
Solicitation # SPE4A6-26-R-XC98
This solicitation, issued by the Department of Defense ASC Commodities Division under solicitation number SPE4A6-26-R-XC98, is for the procurement of 1,873 units of Stud Assembly, Turnlock Fasteners, part number FX10-1582-1TS and NSN 5325-00-731-7743. The contract requires a delivery timeframe of 166 days after receipt of order, with a response deadline of September 11, 2026. The agreement incorporates specific technical and quality standards as defined in the DLA Master List, with the applicable revision determined by the solicitation or award date depending on the acquisition size. Additionally, the contract mandates compliance with requirement RQ011 regarding the removal of government identification from any supplies that are not accepted.
Hardware Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 14 days
View Details
NAICS: 332722
New
DIBBS
RIVET, BLIND
Solicitation # SPE4A6-26-R-XD08
This firm fixed price contract is for the procurement of 400 blind rivets, identified by NSN 5320-01-305-0599 and part number NAS1669-5DL12. The items are designated as critical application items and must be manufactured according to the current revisions of the applicable military or consensus non-government standards, specifically referencing NAS1669 and NAS1675. Delivery is required within 260 days after order, with shipping terms set as FOB Origin and inspection and acceptance occurring at the destination. The contract mandates strict adherence to the DLA Master List of Technical and Quality Requirements, including specific provisions for packaging, physical identification, and quality assurance. Packaging must comply with ASTM D3951 and MIL-STD-129, while palletization follows RP001. Quality sampling will be conducted according to MIL-STD-1916 or ASQ H1331, utilizing a zero-based sampling plan unless otherwise specified. This acquisition is designated as a total small business set-aside.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
RECEPTACLE, TURNLOCK FASTENER
Solicitation # SPE46-26-R-XD17
This firm fixed price contract, identified as SPE4A6-26-R-XD17, is for the procurement of 651 turnlock fastener receptacles, part number V4-109S from Senior Operations LLC. The items are designated as critical application items and must be delivered within 138 days after the order is placed. Inspection and acceptance will occur at the destination, with shipping handled as FOB origin. The contract mandates strict adherence to several technical and quality standards, including CMMC Level 2 self-assessment for cybersecurity and the DLA Master List of Technical and Quality Requirements. Packaging must comply with ASTM D3951 and MIL-STD-129, while sampling and quality assurance must follow MIL-STD-1916 or ASQ H1331. Additionally, the provider must comply with requirements regarding the removal of government identification from non-accepted supplies and specific documentation for source approval requests.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 14 days
View Details
NAICS: 335931
New
DIBBS
CABLE ASSEMBLY, RADIO FREQUENCY
Solicitation # SPE4A6-26-R-XC97
This solicitation from the Department of Defense ASC Commodities Division is for the procurement of 57 radio frequency cable assemblies under part number 5995-01-193-2577. The contract is designated as a total small business set-aside with a required delivery timeframe of 525 days after the order is received. The agreement mandates strict adherence to cybersecurity and quality standards, including CMMC Level 2 certification and DLA master technical requirements. Due to the nature of the technical data, the contract is subject to ITAR and EAR export controls, requiring contractors to have approved JCP certification and completed specialized training. Additionally, the contract specifies requirements for origin inspection, specific packaging standards, and the handling of covered defense information.
Current-Carrying Wiring Device Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 14 days
View Details
NAICS: 541611
New
DIBBS
Domestic Sourcing and Regulatory Compliance Advisory
Administrative Management and General Management Consulting Services

POSTED

1 day ago

DEADLINE

in 7 days
View Details