INSULATION SLEEVING, EL

INSULATION SLEEVING,ELECTRICAL
INSULATION SLEEVING, ELECTRICAL
RQ017: PHYSICAL IDENTIFICATION/BARE ITEM MARKING
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN
THIS ITEM IS IDENTIFIED AS A COMMERCIAL ITEM (TO INCLUDE 'COMMERCIAL
OF A TYPE')
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
RC001: DOCUMENTATION REQUIREMENTS FOR SOURCE APPROVAL REQUEST (SAR)
THIS NSN IS LISTED AS A PRIMARY QPL OR QML
THEREFORE THE QUALIFIED PRODUCTS LIST OR
QUALIFIED MANUFACTURERS LIST IS APPLICABLE.
THIS IS A PERFORMANCE REVIEW INSTITUTE (PRI) QML OR QPL ITEM. PRODUCT
SUPPLIED TO THIS SPECIFICATION SHALL BE MANUFACTURED BY AN ACCREDITED
MANUFACTURER (FOR COMPONENTS) AND/OR ASSEMBLED BY AN ACCREDITIED
MANUFACTURER OR ACCREDITED ASSEMBLING DISTRIBUTOR (FOR ASSEMBLIES) AS
LISTED IN THE PRI QUALIFIED MANUFACTURER LIST (QML)OR QUALIFIED PRODUCTS
LIST (QPL) FOR THIS STANDARD. THE QML OR QPL IS AVAILABLE AT
WWW.EAUDITNET.COM.
SPE4A6-26-T-28CM
SECTION B
12 MONTHS
RS055: Shelf life requirement RS001 for a TYPE 2 (CODE 4) item with a shelf life of 12 month (extendable) applies to this item.
CRITICAL APPLICATION ITEM
TDP Rev C Gen 3 IAW BASIC NON GOVT STD SAE AS23053/1 REVISION NR A DTD 03/01/2018 PART PIECE NUMBER: M23053/1-105-0
TDP Rev C Gen 3 IAW REFERENCE STD NR MIL-STD-129R(3) REVISION NR R DTD 02/25/2023 PART PIECE NUMBER:
TDP Rev C Gen 3 IAW REFERENCE NON GOVT STD SAE AS23053C REVISION NR C DTD 11/01/2023 PART PIECE NUMBER: M23053/1-105-0
TDP Rev C Gen 3 IAW REFERENCE NON GOVT STD QPL-AS23053-QPD REVISION NR DTD 04/23/2026 PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7018186631 0001 FT 26.000
NSN/MATERIAL:5970000631496
DELIVERY (IN DAYS):0005
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 10% MINUS 0%
INSPECTION POINT: ORIGIN
ACCEPTANCE POINT: ORIGIN
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:200 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:EA CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0
UNIT CONT:ZZ OPI:M
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:Q PACKING LEVEL: B
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:33 -33 Type II, shelf life
SPE4A6-26-T-28CM
SECTION B
PR: 7018186631 PRLI: 0001 CONT’D
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING
REQUIREMENTS FOR PROCUREMENT
MATERIAL SHALL BE SUPPLIED ON
A REEL OR SPOOL. EACH REEL
OR SPOOL SHALL BE MARKED IAW
MIL-STD-129 LATEST REVISION
AND ISO/IEC 16388.
BULK BREAK POINT:
WT4KEA
W0C3 USAMSC-K SP60
AWCF SSF CAMP CARROLL
BLDG 505
WAEGWAN 39886
KR
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
WT4KEA
W0C3 USAMSC-K SP60
AWCF SSF CAMP CARROLL
BLDG 505
WAEGWAN 39886
KR
MARKFOR
WT4KEA
W0C3 USAMSC-K SP60
AWCF SSF CAMP CARROLL
BLDG 505
WAEGWAN 39886
KR
M/F: (TCN) WT4KEA62390159
RDD: 264
PROJ: TP 3
SUPP ADD: W9046W SIG: C
FOR GOVERNMENT USE ONLY: (IPD) 12
DIC: A01 DIST: V ADV: FC: Z9
Need Ship Date:00/00/0000 Original Required Delivery Date:09/02/2026
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments%
SPE4A6-26-T-28CM
SECTION B
PR: 7018226747 PRLI: 0001 CONT’D
2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0002 7018226747 0001 FT 200.000
NSN/MATERIAL:5970000631496
DELIVERY (IN DAYS):0005
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 10% MINUS 0%
INSPECTION POINT: ORIGIN
ACCEPTANCE POINT: ORIGIN
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:200 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:EA CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0
UNIT CONT:ZZ OPI:M
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:Q PACKING LEVEL: B
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:33 -33 Type II, shelf life
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
MATERIAL SHALL BE SUPPLIED ON A REEL OR SPOOL. EACH REEL OR SPOOL SHALL BE MARKED IAW MIL-STD-129 LATEST REVISION AND ISO/IEC 16388.
PKGING DATA MIL-STD-2073-1E
QUP:200 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:EA CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0
UNIT CONT:ZZ OPI:M
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:33 -33 Type II, shelf life
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
MATERIAL SHALL BE SUPPLIED ON A REEL OR SPOOL. EACH REEL OR SPOOL SHALL BE MARKED IAW MIL-STD-129 LATEST REVISION AND ISO/IEC 16388.
PARCEL POST ADDRESS:
N00253
SPE4A6-26-T-28CM
SECTION B
PR: 7018226747 PRLI: 0001 CONT’D
NAVAL UNDERSEA WARFARE CENTER
DIVISION KEYPORT NWCF
610 DOWELL STREET
KEYPORT WA 98345-7610
US
SHIP BY FASTEST TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
N00253
NUWC DIVISION KEYPORT
NAVAL SEA LOGISTICS CENTER
610 DOWELL STREET, BLDG 893
KEYPORT WA 98345-7610
US
M/F: (TCN) N0025362468D02
RDD: 267
PROJ: ZT2 TP 1
SUPP ADD: SIG: A
FOR GOVERNMENT USE ONLY: (IPD) 03
DIC: A4A DIST: 9B ADV: 2L FC: EJ
Need Ship Date:00/00/0000 Original Required Delivery Date:09/10/2026
SPE4A6-26-T-28CM NSN/Part Number: 5970-00-063-1496 Quantity: 26 FT Purchase Request: 7018186631QTY: 26 Delivery: 5 days ADO